Unable to remove ASM resource from OCR

Hi all,
I have a new installation 3 node RAC with clusterware and ocfs on win2003
Clusterware was successful, installed and patched, database (10.2.0.4 patch 5) was successful too.
When i tried to configure ASM the 1st node crashed and reboot, but a ASM "ghost" instance left in the services.
I removed with oradim and restart to configure ASM.
the 2nd turn the 2nd instance died but now i have the ora.node#.ASM#.asm for all 3 nodes in the OCR in UNKNOWN state and i'm not able to delete and restart the configuration of ASM
i tried crs_unregister but was unsuccessful (CRS-0216).
Any suggestion??

Why you try with CRS_unregister?, "srvctl -f" did not work ?
CRS_Unregister generally is used when it was not needed. You should use srvctl remove to remove CRS resources. CRS_Unregister should only be used if you are trying to repair an inconsistency, I'm not sure if this is the case.
Is the clusterware working fine and the OCFS2 is configured properly ? Did you succesfully mounted a CFS in all nodes ?
If this does not help and you have a valid CSI take a look to Metalink note:357261.1

Similar Messages

  • Unable to remove this item from GRIR.  It was a consignment PO receipt done

    Hi Guys,
    The user saying that"unable to remove this item from GRIR.  It was a consignment PO receipt done improperly, so it needs to be deleted".
    Because of this the the material documet which shows $6725.43-(Negative) in GRIR account.when i check this this transation was originated through MI10(Physical inventory differenvces posting).May be user done wrongly.
    Now the problem is this
    -          how this transaction originated?
    -          Why is this posted to GR/IR account?
    -          How do we correct the open item in the GR/IR account?
    -          What need to happen to rectify the mistake?
    can any tell me how can we do this,i will be greatful to u.
    Thanks&Regards,
    Babu,
    09930154536

    Hi Jurgen,
    when i check the material document and accounting document,it was showing that said amount in negative sign and transaction done by MI10 means posted differences with out reference to document.
    it means the user may entered wrongly i think.
    was there any GRIR account for MI10?
    MI10 does not have reversal or cancel?
    so how to resolve it?
    as per my idea it can be done by FI posting.
    please help to resolve.
    Thanks in advance.
    Regards,
    Babu
    09930154536

  • Unable to remove a host from VMM - Error (2606) Unable to perform the job because one or more of the selected objects are locked by another job.

    I am unable to remove a host from my Virtual Machine Manager 2012 R2. I receive the following error:
    Error (2606)
    Unable to perform the job because one or more of the selected objects are locked by another job.
    Recommended Action
    To find out which job is locking the object, in the Jobs view, group by Status, and find the running or canceling job for the object. When the job is complete, try again.
    I have already tried running the following command in SQL Server Management Studio
    SELECT * FROM [VirtualManagerDB].[dbo].[tbl_VMM_Lock] where TaskID='Task_GUID'
    I received this error back:
    Msg 8169, Level 16, State 2, Line 1
    Conversion failed when converting from a character string to uniqueidentifier.
    I have also tried rebooting both the host and the Virtual Machine Manager Server.  After rebooting them both, I still receive the same error when trying to remove the host.
    Here are my server details
    VMM Server OS = Windows 2012 Standard
    VMM Version = 2012 R2 3.2.7510.0
    Host OS = Windows 2012 R2 Datacenter
    Host Agent Version = 3.2.75.10.0
    SQL Server OS = Windows 2012 Datacenter
    SQL Version = 2012 SP 1 (11.0.3000.0)

    Hi there,
    How many hosts are you managing with your VMM server?
    The locking job might be the background host refresher job. Did you see any jobs in the jobs view, when the host removal job failed?
    If there is no active jobs in the jobs view when this host removal job fails, can you please turn on the VMM tracing, retry the host removal, and paste back the traces for the failed job (search for exception and paste the whole stack)?
    Thanks!
    Cheng

  • Apple TV unable to remove tv shows from favorites

    After the latest upgrade I am unable to remove tv shows from favorites and when I rearrange the icons they go back to the previous order after a few minutes.  Is anyone having this issue?  Any ideas on a resolution or is this just another of the many bugs in the latest release?

    Hi arnie9,
    If you are having unusual interface behavior with your Apple TV after a recent update, you may find the following article helpful:
    Apple TV (2nd and 3rd generation): Restoring your Apple TV
    http://support.apple.com/kb/ht4367
    Regards,
    - Brenden

  • Unable to remove 'ghost' resource

    Any ideas on how to remove an XML resource that was loaded into schema tables that no longer exist? The tables and schema have been succesfully removed, but I am not able to remove the resource. I have tried both the OEM remove resource option and deleting from the resource_view. In both cases, I receive:
    The following error has occurred:
    ORA-31018: Error deleting XML document
    ORA-06512: at "XDB.XDB_RVTRIG_PKG", line 0
    ORA-06512: at "XDB.XDB_RV_TRIG", line 9
    ORA-04088: error during execution of trigger 'XDB.XDB_RV_TRIG'

    Hi,
    did you try dbms_xdb.deleteresource with the dbms_xdb.delete_recursive_force option ?
    Regards

  • Unable to remove mozilla folder from C:\Users\Username\Appdata\

    We're trying to remove Firefox as its messing with the roaming profiles on the server,
    we're unable to remove the following folders
    c:\program files (x86)\mozilla firefox
    c:\users\username\appdata\mozilla,
    error message says need permission from administrators (we're logged in as full domain administrator)

    The problem lies in the administration patches. Somewhere one or more of the security updates was missed or ignored. The admin pointers to the permissions on the stack in the HAL layer are pointing to a NULL field. This is a common problem with MS(c) based OS's. Solutions: (1) Remove and Re-apply security updates in order. (2) reload and allow the OS' to catch all the updates. (3) Scream at MS(c) until they tell you what update you missed.

  • How to remove a resource from project team without data loss

    I have a requirement that, the resource must be removed from a project team after getting DE-allocated from the project.
    If i do so, the data of the resource for that project, i.e; actual hours per task filled by the resource gets deleted, which seems not correct. The report for such projects comes out wrong.
    Is there any way to de-allocate the resource from the team while keeping all his data there in the project ?
    The basic requirement is to restrict the manager to allocate a task to a team member who is not the part of project anymore.

    Hi Abhishek,
    If the resource has actual on the project, indeed it cannot be removed from the project team. It is just a matter of communicating with the project manager. Here is how the project manager should proceed.
    Open the project in Project Pro
    Open the "build team from enterprise" in the resource ribbon
    Select on the left side (available resources) the new resource
    Select on the right side (project resources) the deallocated resource
    Click on "replace": you'll be prompted that the resource has actuals on the project and cannot be replaced and that only the remaining work will be assigned to the new resource.
    Doing this, you'll keep the project history, but still the PM will be able to assign the deallocated resource. There is no way to prevent it, unless you deactivate the resource, but it will be at enterprise level, meaning for all projects.
    Hope this helps,
    Guillaume Rouyre, MBA, MVP, P-Seller |

  • Unable to remove credit card from Apple Pay

    I'd like to remove my credit card from the Apple Pay application on my iPhone 6. The instructions say to touch the card in the Passbook and then click on the "i." Then scroll down and touch "Remove Card." I tried that but the Remove Card link is not "hot," that is, nothing happens when I touch it.
    Any suggestions or "work-arounds" to remove my card from the application?

    I only had one card in Apple Pay and I decided to remove it. I did ao without issue. I did it on my iPad Air 2, not on my iPhone 5S which does not have Apple Pay. My point is that I only had one card in Apple Pay, not multiple cards.
    Do you have any restrictions set that would prevent account changes. Settings>General>Restrictions.

  • Shared Services 11.1.2 Unable to remove assigned user from a security group

    In Shared Services 11.1.2 - trying to remove a user from the assigned users list of a security group. Initially, I am able to remove the user and the assigned users total decreases by one - but when I relaunch the group properties - this user is still in there? The change does not hold. Any suggestions would be appreciated - thanks,
    Paul

    Hello Paul,
    Not sure if this is related to yours, but it might be worth having a look at the following articles on Oracle support --
    External users in EPM Shared Services (e.g. MSAD users) cannot be removed from Native groups if they have multiple IDs in the external user directory. [ID 1526569.1]
    Users from External User Directories Cannot be Removed from Native Groups [ID 1272309.1]
    Thanks,
    hyperionEPM
    Please mark answers as correct or helpful for others to find them easily.

  • Unable to remove my photo from outgoing email

    I was playing with Photobooth, and somehow I inadvertently changed some setting that results in a photo of myself being attached to every email message I send. Nowhere in Help does it tell me how to undo that. In fact, I would like to remove the photo from my Admin account also. When I sign into it to make changes, there is no way to do that. Any ideas??

    I couldn't figure out a way to remove it, but I made it disappear by taking a small screen shot (command-shift 4) of a white space in a document. This creates a photo which you can then choose in Addressbook or your Accounts Pref. pane to replace the unwanted photo that appears in sent mail. It's still there but you can't see it.

  • Forms Designer - Unable to remove Child Table from the form

    Hello,
    While testing adding additional attributes, I have assigned an additional child table to the form. However I am not able to remove it. I get an error message: "This version has been made active. Add/Update/Delete not allowed."
    I tried creating new version and making it active to remove 'active' status from the form I modified, but still getting the same error. What am I doing wrong? Thank you in advance.

    creating new version and making it active to remove 'active+'
    Make new version then remove child form and then make version active..
    You are making version active b4 removing child table.
    Don't change the sequence which I have written above.

  • Unable to remove 'cifs preposition' from WAE

    Hi.
    I created a 'cifs preposition' using the CLI on the WAE instead of doing this on the Central Manager and now I am unable to remove it, I keep getting this error below when I use the 'no' command.
    Here is the config and steps I am taking and the error I receive:
    accelerator cifs preposition 19927
       name "remove"
       server "10.10.12.90"
       root "repository/REGIONS/"
       credentials username xxxx domain xx password xxxxxxx
       max-cache 2
       no ignore-hidden-dir
       no recursive
       scan-type since last
       schedule
       no enable
       modified 19:09:2012 09:51:58
    exit
    When I try to remove using the following: WAE1(config)#no accelerator cifs preposition 19927 I receive the error below.
    "config: spawnp: verify binary file: /ruby/bin/echo: No such file or directory
    Error spawning user process '/ruby/bin/echo': No such file or directory"
    Thanks
    Zubair

    Peter,
    As always thanks for taking time to respond. Indeed your method is correct and worked.
    I do agree with your sentiments, this is an "ugly cosmetic problem", Cisco should keep a standard which we all used by using 'no' to negate the command.
    Thanks for your help.
    Regards
    Zubair

  • Unable to remove billing block from an Sales order.

    Hi Team,
    I'm cleaning return order that still blocked from long time ago till 2009 and I have a few of them that I cannot release the block because I'm getting an error message and don't allow us to get into VA02. Error--(Date 01/03/0001 is before the beginning of factory calendar XC). I tried to remove factory calendar from customer master but still I am getting an error message. so is there any standard programme to remove the block or any other method ?
    Thanks
    Sits

    The problem here is not that you cannot remove the block but that the document cannot be edited in general. My guess is that some change occurred in the system since the documents were created (either configuration, master data or a new user exit).
    If the document cannot be modified in VA02, I doubt it would be possible to modify it in any other transaction (because they all, essentially, end up calling the same functionality). I would suggest to debug the code to see where exactly the message occurs. It may also be possible to bypass the message in debugger and proceed with the change. I wouldn't recommend this as general practice, but it might work as an exception.
    Also you might want to consider archiving with deletion instead (use Search), if the documents are very old.

  • Unable To Remove An Image From An Album - Sometimes

    I have a project containing approximately 2900 images (masters plus versions). I have defined 8 albums and moved various images to each. I am able to select one or more pictures in any of the albums. For simplicity lets assume that I have a single image selected and I want to remove it from the album it is in. I go to the Image menu. About one-third of the time the "remove from album" option is enabled, and when it is I am able to delete the image either by selecting the Image option or using the Delete key. However, the other two-thirds of the time The "remove from album" is grayed out and even using the Delete key does not remove the selected image.
    One interesting behavior I have observed. If I find an image I am unable to delete, I can first select an image I KNOW can be removed, duplicate it, the select just the replicant plus the image I wanted to remove originally and now BOTH images can be deleted (the "remove from album" option is available).

    I'm having the same kind of problem and it's driving me nuts! Most of my problems have arisen from duplicate images imported when I did a mass import into Aperture from iPhoto. It brought in both the original image and the edited image, and I can't remove either from a given album! I will try your suggestion of duplicating a cooperative image first and using it as the "seed" for deletion.

  • HT1420 my i tunes account is authorized on 5 computers. however all but 4 of them have crashed and i was unable to remove the authorization from them. now i have purchased a new computer and can not authorize it. is there anything i can do to fix this?

    My i tunes account is authorized on 5 computers. However all but 1 of them has crashed or broken and I now longer have them. Due to them breaking i was not able to remove itunes from them. I have now purchased a new computer and due to the 5 limit I am unable to authorize my new one. Is there anything that I can do about this with out loosing all my purchased music? I use music for my business and it is extreamely important that I don't loose it. please HELP!!!

    Use the Deauthorize All function documented in that article; while it won't delete your music, you should have a backup of it anyway.
    (76771)

Maybe you are looking for