Unable to remove image from photoshop

unable to remove image from photoshop

in the top line under adobe photoshop cs6
the data of the 2 images appears if  i check the x it goes away  only to return the next time I close photo and reopen cs6
same thing happens  if I close individually  or close all    seems that any I way close it  or empty  the data bar
then close photo shop and reopen it  the 2 images are back   open photo shop from application in the application folder same thing
cut clear grayed out under edit

Similar Messages

  • Unable to save images from photoshop

    Using the external editor linked to Photoshop CC 2014, images from Aperture show up in Photoshop for editing.  But after making changes, and saving the file, Aperture doesn't get updated for any of the changes I made in PS. Any suggestions on how to get edited images back into Aperture? (I am using Mac version 10.9.5 and Aperture 3.5.1)

    Your assumption is correct.
    The workflow is:
    Select Image in Aperture for external editing.
    Send Image to external editor via one version of Aperture's "Edit with NameOfExternalEditor" command.
    Aperture creates a new Original based on the selected Image and opens specified external editor with the Original loaded.
    You make changes to this file in the external editor.
    You close this file and select "Save Changes" (or similar) when prompted.
    You return to Aperture and find an Image based on the newly-created Original selected.  This Image shows the changes you made in the external editor.  It is badged with Aperture "Edited externally" badge.
    Let's check a couple of things:
    - Are you showing all Images in the Aperture Browser?
    - Are there any externally-edited Images in the Project after you have completed editing in Photoshop?
    For the first, clear any filter you have set for the Browser by clicking the dark-on-light drop-down magnifying glass icon _in_ the Browser search field and selecting "Show All".
    For the second, filter for externally edited Images by clicking the dark-on-light magnifying glass icon _next to_ the Browser search field and setting a filter with the Rule "File Type" set to "is", "externally edited".
    Report back.

  • Moving File images from photoshop to photo elements

    I am unable to move images from photoshop to lightroom. The ones I want to move shows up as a clouded image that I am unable to export. Any thoughts?

    Hi! Can you clarify where you are trying to move photos to and from?
         Photoshop Elements > Photoshop
         Photoshop Elements > Lightroom
              ...or...
         Photoshop > Photoshop Elements
         Photoshop > Lightroom
    You've posted in the Photoshop for Beginners forum, but if you need help with Photoshop Elements or Lightroom, we can redirect you to the correct forum.
    Photoshop Elements forum
    Lightroom forum
    Cheers,
    Kendall

  • How to insert cropped images from photoshop without the white background

    Basically all I want to do is take a peice of writing from a video and insert it into another video. To do this I've took a screenshot of the font from the video and imported it into photoshop. I've then cropped/cut/took the the peice of writing I want, letter by letter. I want to be able to insert it into another video, but whenever I attempt to do it, I have the default white background of photoshop. Is there anyway to insert an image from photoshop, without taking the background with it, or even insert a layer from photoshop straight into final cut pro? Sorry if this is confusing.

    I don't think so. I cropped the letters, put them each an individual file, removed the background, saved them as a TIF then tried to import them onto Final Cut Pro, but a white background still appeared in the TIF file. Basically I just want to make the background transparent I believe.

  • Removing Images from iPhoto

    I don't know how to remove images from iPhoto 8 or 6. I prefer to use PhotoShop Elements and I want to move the iPhoto images from wherever they are into a separdate folder so that I can put them into Bridge CS3 and use Elements. But I cannot figure a way to do this. Thanks.

    Terence
    I purchased the Duplicate Annihilator that you recommended and with about an hour it had detected almost 5,000 duplicates, so I went ahead and identified them, also did the thumbs and found about 300 there, so I put them in the trash and deleted all that came up and now I am down to 5,000 - pictures. I will run it again tomorrow
    Thank you for your help, and a bargain to boot, I must tell my Mac store about this!
    Very much appreciated.... the reason that I hesitated to bring over the old iPhoto is that a few months back a bunch of my pictures from there 'disappeared' -so I didn't want to import a corrupt application?
    Happy trails
    Jan

  • Why can't I copy an image from photoshop, i can't paste it in anoter computer program ?

    Why can't I copy an image from photoshop, i can't paste it in anoter computer program ?

    Denis Beelog wrote:
    Why can't I copy an image from photoshop, i can't paste it in anoter computer program ?
    Assuming Windows...
    You can, assuming you select around the pixels you want to copy, and the selected region isn't too large.
    There are a variety of ways you can get the copy operation wrong, e.g., by not having the proper layer selected or similar.
    And there's a secret setting to enable Photoshop to export its clipboard no matter how large the selected pixel set is.  Note the setting I have bolded below.  Keep in mind that by making this setting you may be subjecting all the software on your computer that registers to receive clipboard data to datasets that are larger than it might expect.  In other words, there could be a downside.  That being said, I haven't had any problems on my Windows 8 system.
    # Photoshop "special items" user-specific configuration file
    #  Must be named PSUserConfig.txt and be put here:
    #   %USERPROFILE%\AppData\Roaming\Adobe\Adobe Photoshop CC 2014\Adobe Photoshop CC 2014 Settings\PSUserConfig.txt
    #  All possible entries:
    #   AllowAsyncIO
    #   AllowOverScrolling
    #   AllowUserConfigFile
    #   ClipboardMaximumSize
    #   DragBoundingBoxOpacityPercent
    #   EnableGestureRotation
    #   FileStreamDefaultSize
    #   ForceProgress
    #   FullPreviewMaxSize
    #   GPUAllowGLXP64
    #   GPUAllowPBOs
    #   GPUCheckerBoardNodeInBlitPipe
    #   GPUDiableMainWindow
    #   GPUDisallowAdvancedGLRendering
    #   GPUDisallowAppleClientStorage
    #   GPUDisallowCanvasImposters
    #   GPUForceLinearCheckerBoardNodeInBlitPipe
    #   GPUIgnoreMemoryRequirements
    #   GPUShouldNotScootATISelections
    #   GPUUseAceNodeInBlitPipe
    #   GPUUseFloatTextures
    #   GPUUseVBLSync
    #   MemoryAlignment
    #   PDFAllowHugeFiles
    #   PDFPresentationAllowHugeFiles
    #   PreserveEXIFMakerNotes
    #   RecentFilesSlowTimeout
    #   SpringKoadedKeyTime
    #   SyncSmartUploads
    #   TrackPadAllowGestures
    #   UseStagingServer
    #   UseSystemStylus
    #   VMCompressPages
    #   VMDisableBuffering
    #   VMForceBuffering
    # Enable Overscrolling:
    AllowOverScrolling 2
    # Remove the clipboard export size cap
    ClipboardMaximumSize 0
    -Noel

  • Building a site out of sliced images from photoshop

    I've just begun a web design class and i assume that the instructor has us building sites this way cuz pretty much none of us have any idea how to use CSS (pretty much everyone in the class is brand new to web design, myself included).  So i'm pretty much trying to build the entire thing/layout with a 945 pixel wide table (height to be 625 when everythings in place).
    It isn't working though, once i start splitting and merging stuff gets really messed up, like the measurements of cells appear to almost randomly change and when i try to change them back it like, wont work.
    i seriously dont know why this isnt working, google search has answered this question not at all.  i just dont think i dont know how to use tables, which i need to do in order to complete his assignments.
    plz halp meh T.T

    Building a site out of sliced images from Photoshop is a poor way for your instructor to begin your web design/Dreamweaver learning.
    Site layouts built this way are fragile and inflexible.
    Once you start splitting and merging cells and moving cell borders around, you open a world of debugging and troubleshooting.
    Much better to learn some elementary HTML and CSS first then learn Dreamweaver in a weekend. Dreamweaver makes so much more sense when you do.
    As it is, you're trying to learn Dreamweaver, HTML (and a little CSS) simultaneously on the fly. Really inefficient way to do it.
    Tables in web design are elastic by nature i.e. they collapse to fit snug against the content inside them.
    Since you're already on this journey, remove your cell dimensions entirely and see what happens.

  • How do I remove images from aperture?

    Totally new to apple and aperture so I apologise if this seems like a somewhat noob question but how do I remove images from aperture (using the latest version, 3.4.1)? Coming from a PC and using lightroom I'm used to being able to remove images in two ways:
    - removing the image from the "library", so that it no longer shows up in the program at all but is still on your hard drive (when I say removing it from the program entirely, I mean entirely, i.e. not sitting in a trash can or some other place where it's still taking up memory)
    - deleting the original image off the hard drive
    Is it possible to do either of these things in aperture, on both just a single image or a selection of multiple images, and if so how? I've tried googling this already and am getting a bunch of mixed solutions, none of which have really worked so far, so any answers would be appreciated. Thanks!

    The answer partially depends on whether you have a managed or referenced library. Since you're totally new to Aperture, I'm assuming you have a managed library since that's the default.
    FYI: Managed means Aperture handles image files and places them inside the library file. Referenced means you manage the image files and Aperture only points to (references) them.
    For a managed library, select an image you want to delete. Type command-delete. (That's the reverse delete key next to the "=" key). (You can also right-click an image and choose Delete Version) That will remove the images from their Project and place in the Aperture Trash. They're still taking up space in the Trash. If you really want them gone for good, right-click the Trash in the library pane and select Empty Trash. Poof.
    For a reference library, I forgot the exact details since I don't use this type of library, but you'll be asked (or can check a box) to delete the original file from the disk.

  • Exporting text as an image from Photoshop

    I am using a non web safe font and so I am exporting the body of text as an image from Photoshop. Canvas size 900 x 600 pix 72 dpi.  However when viewing in the web browser the text looks soft and pixelated.  
    Does anybody know how I can solve this?   All I want is sharp lookinh text!
    J

    Hi Vikas
    I export files from Photoshop as png's at 72 dpi.  
    Here is our current holding page.  http://www.iheartmylife.co.uk/ All the text on this page has been loaded in as png's from Photoshop along with the image. As you can see none of it is as sharp as it could be.
    Many thanks for your assistance.
    James

  • How do I remove images from Notes app?

    How do I remove images from Notes app?
    I sometimes find that, when cutting and pasting text from the web, an image is also copied (pretty much at all times I try and avoid this, but sometimes the selection process doesn't allow for fine enough control - e.g. a whole block of content may be selected, rather than just the few words I'm trying to copy).
    I then find, once it's part of my note, that I cannot select the unwanted image and remove it. Can anyone tell me if this is something that can be done, and if so... how?
    Thanks, Sebastain

    Hi Drew & Kilgore*
    Thanks for your replies. I also have and use Simplenote, although I went off it for a while, when it started crashing all the time on me. It seems to be more stable again now, so I'll start using it more regularly again, perhaps.
    I am, obviously, disappointed that one can't simply select ANY object within a Notes document and choose to delete it. As I rather suspected, the only solution is an annoying workaround. Apple stuff seems to get more like this as time goes by. At least in my experience.
    I solved the issue my own way in the end, but I guess it was close to your 1st idea DR, and your 2nd option, KT: I basically cut and pasted everything above, and then everything below, the image, and pasted both chunks of text into a new note. So it took two passes, and left me with the original note just displaying the image, which I then trashed.
    Tapping to the right of the image followed by deletion was what I hoped & expected would work. But instead the image stayed put and the text below the cursor would simply slide along the right hand side, moving upwards as I deleted! Most bizarre, to my mind at least.
    Anyway thanks for the feedback. But, for anyone else that might want to know how to do this, the answer is: NO, you can't select and delete an image once it's in one of your notes!
    * I quite recently watched the rather strange Bruce Willis / Nick Nolte 'Breakfast of Champions' movie... I think I still prefer the book to the film!

  • Problem: importing a transparent image from Photoshop to Premiere.

    Dear Adobe community,
    I am trying to import a transparent image from Photoshop to Premiere Pro CC. Whatever file format I choose to export from Photoshop, Premiere Pro CC will not import the file correctly. When I import is, two things occur: 1) the image gets imported, but the white background is still there or 2) the image gets an error "The importer reported a generic error".
    Does anyone have an idea how I can get an image with a white background transparent into Premiere Pro CC.
    Specs:
    MacBook Pro (Retina, 13-inch, eind 2013)
    2.8 GHz Intel Core i7
    16GB RAM
    1536MB Intel Iris videocard
    Thanks!
    Christiaan

    You need to make sure the image has an alpha channel.
    Images like jpeg dont have an alpha channel.
    Psd or png do and the image has to be RGB.
    Make sure the background in PS is also transparant.

  • Unable to export image from Webi to  excel.

    Hi,
    Can any one provide solution for export image from webi to excel( 3.1 & 4.0).
    Thanks,
    Praveen

    given link(https://service.sap.com/sap/support/notes/1299111) is not working.
    the above link contain
    Symptom
    Unable to Export images from a Web Intelligence report to Microsoft Excel.
    A Web Intelligence report is created using images to denote alerts. The report works OK in Web Intelligence but when exported to Microsoft Excel, the images do not display.
      Environment  
    Business Objects Enterprise XI Release 2
    Business Objects Enterprise XI 3.1
      Reproducing the Issue  
    Create a simple Web Intelligence document.
    Add a blank cell and within that cell link it to an image. (Either set as background for the cell or Image URL.)
    Save and export to Excel. The image will not be displayed.
    Cause
    Web Intelligence export engine does not support the export of images to excel.
    Resolution
    In BI4.0, Web Intelligence export engine does support the export of images to excel.
    Workaround 1 :
    Most image formats are supported in PDF export. Users may be able to use that as an alternative.
    Workaround 2 :
    If images are required in the final Excel document, the user would need to recreate those image links manually in Excel.
    Keywords
    Export , image , excel , WRC, Webi ,XIR2, XI3.1 , BI4.0
    Header Data
    Released On
    21.10.2011 14:43:35   
    Release Status
    Released to Customer   
    Component
    BI Business intelligence solutions  
    Priority
      Normal  
    Category
      Problem  
    Product
    Product
    Product Version
    SAP BusinessObjects Business Intelligence platform
    SAP BusinessObjects Enterprise XI 3.0

  • How do I bring tags on images from photoshop elements 8 to photoshop CS6

    How do I bring tags on images from photoshop elements 8 to photoshop CS6

    Mylenium wrote:
    Ask in the PSE/ PS forums. The simple answer is, though, that unless they are emebedded in the image or exist as sidecar XMP files PS won't use them. It doesn't look inside the PSE catalog files/ database.
    Mylenium
    ... which means you have to use the menu /file/write metadata to files so that the tags and ratings are written in the files or sidecar files themselves.

  • Printing banner images from photoshop CS3

    Hi, I have successfully printed banners 1200mm x 297mm from my Xerox Phaser 7750 and Illustrator (Vector art). When I try to print a photographic image from Photoshop it all prints fine except the last 300mm or so. The image has white bars and properly printed image evenly spaced from top to bottom of the print. I have reduced the resolution and file size but the problem is still there with wider bars the lower the resolution. The original image was 160mb but I have the same issue with a 20mb image. ALso tried placing in Illustrator but get similar problems.
    I assume this is a memory issue but I thought lowering the file size drastically would fix it, yet it doesn't. The Printer has a relatively low amount of memory (384mb) but I would like to know if this is the real cause before I dive and buy more memory - big chips are still expensive on this.
    Any help would be very welcome.
    Thanks. Ant

    Hi, I will try printing from inDesign but I have managed to get an image to print out by changing the quality in the print driver to standard - it was previously on 'Enhanced' or 'Photo'. I had tried from Illustrator and had similar problems (printed OK with Illy created art though) so thought it may be a printer memory issue which does seem to be the case. I assumed that by reducing the file size/resolution it would print but it seemed to be the image quality that uses more computing power than the pixel count of the file. I guess a different RIP may also help as it could use the much higher RAM of the Mac rather than the printers meagre 384mb.
    I had originally thought it may be a P/Shop issue as I had problems printing to Epson inkjet some months ago and then Epson and Adobe seemed to blame each other!
    Thanks for the reply.

  • Cannot align images from photoshop

    i am importing images from photoshop and when i try and put them side by side one goes underneath. its like in microsoft word when you have the paragraphs on when you put images together. i need a option to un-wrap the images so they can go side by side rather than one under the other. i hope someone understands! i changed the borders on the images to "0" and still no joy. help will be greatly appreciated.
    james

    here's the code if it helps
    <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
    <html xmlns="http://www.w3.org/1999/xhtml">
    <head>
    <meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
    <title>LaneWebDevelopments Homepage!</title>
    <script type="text/javascript">
    <!--
    function MM_preloadImages() { //v3.0
      var d=document; if(d.images){ if(!d.MM_p) d.MM_p=new Array();
        var i,j=d.MM_p.length,a=MM_preloadImages.arguments; for(i=0; i<a.length; i++)
        if (a[i].indexOf("#")!=0){ d.MM_p[j]=new Image; d.MM_p[j++].src=a[i];}}
    function MM_swapImgRestore() { //v3.0
      var i,x,a=document.MM_sr; for(i=0;a&&i<a.length&&(x=a[i])&&x.oSrc;i++) x.src=x.oSrc;
    function MM_findObj(n, d) { //v4.01
      var p,i,x;  if(!d) d=document; if((p=n.indexOf("?"))>0&&parent.frames.length) {
        d=parent.frames[n.substring(p+1)].document; n=n.substring(0,p);}
      if(!(x=d[n])&&d.all) x=d.all[n]; for (i=0;!x&&i<d.forms.length;i++) x=d.forms[i][n];
      for(i=0;!x&&d.layers&&i<d.layers.length;i++) x=MM_findObj(n,d.layers[i].document);
      if(!x && d.getElementById) x=d.getElementById(n); return x;
    function MM_swapImage() { //v3.0
      var i,j=0,x,a=MM_swapImage.arguments; document.MM_sr=new Array; for(i=0;i<(a.length-2);i+=3)
       if ((x=MM_findObj(a[i]))!=null){document.MM_sr[j++]=x; if(!x.oSrc) x.oSrc=x.src; x.src=a[i+2];}
    //-->
    </script>
    </head>
    <body onload="MM_preloadImages('rollovertools_02.gif','rollovertools_03.gif','rollovertools_04. gif','rollovertools_05.gif')">
    <img src="Top-Graphic_02.gif" width="938" height="124" /><a href="#" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('Home','','rollovertools_02.gif',1)"><img src="Home-Page_02.gif" alt="Go Home!" name="Home" width="110" height="48" border="0" id="Home" /></a><a href="#" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('About Us','','rollovertools_03.gif',1)"><img src="Home-Page_03.gif" alt="About Us" name="About Us" width="146" height="48" border="0" id="About Us" /></a><a href="#" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('Web Development','','rollovertools_04.gif',1)"><img src="Home-Page_04.gif" alt="Web Development" name="Web Development" width="266" height="48" border="0" id="Web Development" /></a><a href="#" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('Contact Us','','rollovertools_05.gif',1)"><img src="Home-Page_05.gif" alt="Contact Us" name="Contact Us" width="171" height="48" border="0" id="Contact Us" /></a>
    <img src="Home-Page_06.gif" width="239" height="48" /><img src="mainblurb_03.gif" width="366" height="858" border="0" /><img src="prices_03.gif" width="448" height="359" border="0" />
    </body>
    </html>

Maybe you are looking for