Unable to remove job in u201Creadyu201D mode in sm37

I have a job in u201Creadyu201D mode in sm37, I need to remove it.
Had tried Cancel, changing, and deleting it but it doesnu2019t allow me to do so, it either say u201CJob is not active - cancellation not possible!, Job is active. The selected function cannot be performed or Job cannot be modified due to its status.
Had tried JOB->check status. Starting ASA or Planned. Both run a very long time and it doesnu2019t work too.
Does anyone has any ideas howl to remove it.

Hi JL,
"Job is not active - cancellation not possible" message is expected, as job in "Ready" status can't be cancelled.
The possible reason for the job in "Ready" status may be at the scheduled time, the job was not able to get a free background workprocess.
For background job troubleshooting you can go through this,
http://help.sap.com/saphelp_nw70/helpdata/EN/51/c0e07d569a11d189200000e8323d3a/content.htm
Do you see any background workprocess for the job running? in that case go to SM50 > Process->Cancel withot core.
hope this helps,
Debasis.

Similar Messages

  • Unable to remove a host from VMM - Error (2606) Unable to perform the job because one or more of the selected objects are locked by another job.

    I am unable to remove a host from my Virtual Machine Manager 2012 R2. I receive the following error:
    Error (2606)
    Unable to perform the job because one or more of the selected objects are locked by another job.
    Recommended Action
    To find out which job is locking the object, in the Jobs view, group by Status, and find the running or canceling job for the object. When the job is complete, try again.
    I have already tried running the following command in SQL Server Management Studio
    SELECT * FROM [VirtualManagerDB].[dbo].[tbl_VMM_Lock] where TaskID='Task_GUID'
    I received this error back:
    Msg 8169, Level 16, State 2, Line 1
    Conversion failed when converting from a character string to uniqueidentifier.
    I have also tried rebooting both the host and the Virtual Machine Manager Server.  After rebooting them both, I still receive the same error when trying to remove the host.
    Here are my server details
    VMM Server OS = Windows 2012 Standard
    VMM Version = 2012 R2 3.2.7510.0
    Host OS = Windows 2012 R2 Datacenter
    Host Agent Version = 3.2.75.10.0
    SQL Server OS = Windows 2012 Datacenter
    SQL Version = 2012 SP 1 (11.0.3000.0)

    Hi there,
    How many hosts are you managing with your VMM server?
    The locking job might be the background host refresher job. Did you see any jobs in the jobs view, when the host removal job failed?
    If there is no active jobs in the jobs view when this host removal job fails, can you please turn on the VMM tracing, retry the host removal, and paste back the traces for the failed job (search for exception and paste the whole stack)?
    Thanks!
    Cheng

  • Microsoft Exchange Mailbox Replication service was unable to process jobs in a mailbox database 1006.

    HI all,
    I ran into a problem with one of the servers in my DAG.  Due to a backup failure, the log partition filled up and the Exchange database went offline on this particular server.  The DAG continued to function on the other server.  So this particular
    DB01 had only some test accounts in it so I removed the database copy.  Unfortunately the removal must not have completed correctly. 
    After recovering the needed space in the partition, I tried to recopy the database and it failed.  So I deleted the entire database from the active server and it successfully removed it from the active server.  Now on both the servers the database
    is not showing, however I'm receiving the error below which indicates to me that the service still thinks the database exists.  I am also getting event 4113 Database redundancy health check failed for the database copy as it shows there is only one copy
    of the database (failed redundancy) but there should be zero copies.
    This database no longer exists in AD as I have verified this with ADSI so it must have something on the exchange server that is still telling the service the database exists. 
    Can you point me to the location to clean this up?
    Log Name:      Application
    Source:        MSExchange Mailbox Replication
    Date:          02/25/2011 2:00:07 PM
    Event ID:      1006
    Task Category: Service
    Level:         Warning
    Keywords:      Classic
    User:          N/A
    Computer:      email1.domain.com
    Description:
    The Microsoft Exchange Mailbox Replication service was unable to process jobs in a mailbox database.
    Database: DB01
    Error: MapiExceptionUnknownUser: Unable to open message store. (hr=0x80004005, ec=1003)
    Diagnostic context:
        Lid: 55847   EMSMDBPOOL.EcPoolSessionDoRpc called [length=243]
        Lid: 43559   EMSMDBPOOL.EcPoolSessionDoRpc returned [ec=0x0][length=200][latency=0]
        Lid: 23226   --- ROP Parse Start ---
        Lid: 27962   ROP: ropLogon [254]
        Lid: 17082   ROP Error: 0x3EB    
        Lid: 26937 
        Lid: 21921   StoreEc: 0x3EB    
        Lid: 27962   ROP: ropExtendedError [250]
        Lid: 1494    ---- Remote Context Beg ----
        Lid: 26426   ROP: ropLogon [254]
        Lid: 22086 
        Lid: 27206 
        Lid: 17990 
        Lid: 16966   StoreEc: 0x8004010F
        Lid: 31433   StoreEc: 0x8004010F
        Lid: 8620    StoreEc: 0x3EB    
        Lid: 1750    ---- Remote Context End ----
        Lid: 26849 
        Lid: 21817   ROP Failure: 0x3EB    
        Lid: 26297 
        Lid: 16585   StoreEc: 0x3EB    
        Lid: 32441 
        Lid: 1706    StoreEc: 0x3EB    
        Lid: 24761 
        Lid: 20665   StoreEc: 0x3EB    
        Lid: 25785 
        Lid: 29881   StoreEc: 0x3EB    
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="MSExchange Mailbox Replication" />
        <EventID Qualifiers="32772">1006</EventID>
        <Level>3</Level>
        <Task>1</Task>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2011-02-25T22:00:07.000000000Z" />
        <EventRecordID>181576</EventRecordID>
        <Channel>Application</Channel>
        <Computer>email1.domain.com</Computer>
        <Security />
      </System>
      <EventData>
        <Data>DB01</Data>
        <Data>MapiExceptionUnknownUser: Unable to open message store. (hr=0x80004005, ec=1003)
    Diagnostic context:
        Lid: 55847   EMSMDBPOOL.EcPoolSessionDoRpc called [length=243]
        Lid: 43559   EMSMDBPOOL.EcPoolSessionDoRpc returned [ec=0x0][length=200][latency=0]
        Lid: 23226   --- ROP Parse Start ---
        Lid: 27962   ROP: ropLogon [254]
        Lid: 17082   ROP Error: 0x3EB    
        Lid: 26937 
        Lid: 21921   StoreEc: 0x3EB    
        Lid: 27962   ROP: ropExtendedError [250]
        Lid: 1494    ---- Remote Context Beg ----
        Lid: 26426   ROP: ropLogon [254]
        Lid: 22086 
        Lid: 27206 
        Lid: 17990 
        Lid: 16966   StoreEc: 0x8004010F
        Lid: 31433   StoreEc: 0x8004010F
        Lid: 8620    StoreEc: 0x3EB    
        Lid: 1750    ---- Remote Context End ----
        Lid: 26849 
        Lid: 21817   ROP Failure: 0x3EB    
        Lid: 26297 
        Lid: 16585   StoreEc: 0x3EB    
        Lid: 32441 
        Lid: 1706    StoreEc: 0x3EB    
        Lid: 24761 
        Lid: 20665   StoreEc: 0x3EB    
        Lid: 25785 
        Lid: 29881   StoreEc: 0x3EB     </Data>
      </EventData>
    </Event>

    Hi
    This error occurs because the MailboxReplicationService (MRS) currently caches Mailbox Database information past the lifetime of some databases. 
    Restarting the service will clear the cache.
    Maybe it is the simplest way to solve it.
    If it doesn’t work, you can try cmd to check it.
    Get-MailboxDatabase : Can you find the database which you delete?
    Remove-MailboxDatabase -Identity "MyDatabase": You can try to delete database if you can see the database.

  • Unable to remove/change sales tax in sales order

    Hi Sappers!!
    I are unable to remove sales tax from a sales order.  I have tried to update the sales order by clicking on Header>Conditions Tab>Update-->Double click on G to redetermine the taxes.
    The sales order was entered the same day the Vertex record was input.
    Appreciate your pointers and time!!

    Hi,
    If you want to remove the sales tax from sales order,
    first of all  goto FTXP, give the country, for which you want to change the tax code percentage, and give the tax code and press enter, there it will show existing the tax percentage for that condition type (say earlier it was 10%). Now you want to make it 0% then remove 10 and put it as 0 and save it.
    Next goto condition record VK12 maintaine new tax percentage which you want to change. Like earlier 10% was there but you want to make it as 0%, then maintaine in VK12 tax condition record.
    Now goto your sale order in change mode VA02, and update the procedure using G, then the new tax willbe reflected i.e., 0% will come.
    Hope this is clear
    Reward if helpful
    Thanks
    Praveen

  • Unable to attach documents in Edit mode of Reply to a Discussion

    Hi SCN,
    I am unable to attach documents in Edit mode of Reply to a Discussion (No Choose file button). Is it a bug or a specific case due to some circumstances?
    Referring to thread How to maintain total asset price  where I was trying to replace an attached file (It was being removed but no way to attach)
    Jogeswara Rao K

    I am able to see the Choose File option.
    I'll first post this reply.
    Then open it in edit mode to try attaching a file image.
    Image can be attached as well as embedded.

  • In System Prefereneces, when I am in Desktop and Screen Saver, I am unable to remove folders. I can click the "-" and the folder appears to be gone, but when I close and then reopen System Preferences, and open Desktop and Screen Saver, the folder reappea

    In System Prefereneces, when I am in Desktop and Screen Saver, I am unable to remove folders. I can click the "-" and the folder appears to be gone, but when I close and then reopen System Preferences, and open Desktop and Screen Saver, the folder reappears in the list. I have tried deleting preferences "plist" but I am totally unable to remove the folders.

    I've seen one other report like yours, and I think the issue is caused by a bug, but I don't know what triggers it.
    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and  Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Unable to delete job logs - Error : file is corrupted or unreadable

    Hi,
    We are running SolMan on Windows 2003 and there are some very old job logs (dated 2009) in "F:\usr\sap\sid\SYS\global\000JOBLG\" which we are unable to remove.
    The error is "The file or directory is corrupted or unreadable".  Because of this, Data Protector backup always has errors.
    I have run "RSBTCDEL2" but these logs were not removed.
    Is there a way to remove these stubborn old job logs?
    Thanks in advance

    >
    Sisab Nimda wrote:
    > Hi,
    >
    > We are running SolMan on Windows 2003 and there are some very old job logs (dated 2009) in "F:\usr\sap\sid\SYS\global\000JOBLG\" which we are unable to remove.
    >
    > The error is "The file or directory is corrupted or unreadable".  Because of this, Data Protector backup always has errors.
    >
    > I have run "RSBTCDEL2" but these logs were not removed.
    >
    > Is there a way to remove these stubborn old job logs?
    >
    > Thanks in advance
    Hi Sisab,
    Best is to determine whether you actually have the jobs from 2009 ( completed / Cancelled ones ) in your Solution manager system. If they donot exist in the job tables ( normally can be seen using transaction SM37 and a date range ), just go ahead and delete the joblogs from the OS level from 2009.
    Regards
    Amit

  • Unable to remove a video

    I am unable to remove a video from my iPhone when I sync it using iTunes.  The video is unchecked in iTunes and I have even gone so far as to delete it from my iTunes library.

    Have you tried to turn your phone completly off and back on since syncing with the video unchecked? (http://support.apple.com/kb/ht1430)

  • I have a new Mac Mini and I found AdWare called TakeOverSearchAssetsMac and SearchProjects on it. I have been unable to remove it. Does anyone have any ideas on how to remedy this?

    I have a new Mac Mini and I found AdWare called TakeOverSearchAssetsMac and SearchProjects on it. I have been unable to remove it. Does anyone have any ideas on how to remedy this?

    Please review the options below to determine which method is best to remove the Adware installed on your computer.
    The Easy, safe, effective method:
    http://www.adwaremedic.com/index.php
    If you are comfortable doing manual file removals use the somewhat more difficult method:
    http://support.apple.com/en-us/HT203987
    Also read the articles below to be more prepared for the next time there is an issue on your computer.
    https://discussions.apple.com/docs/DOC-7471
    https://discussions.apple.com/docs/DOC-8071

  • Hi, I am getting a warning message on screen, saying that my iPad hasn't been backed up for 2 weeks, and saying under what circumstances the message appears. My problem is, is that I have backed up iCloud, but am unable to remove the warning.

    Hi,
    I am getting a warning message on screen, saying that myiPad hasn't been backed up to iCloud for two weeks, and advising under what circumstances the message appears. My problem is, is that I have backed it up, but am unable to remove the message, and whilst the message is there, the iPad is frozen, and I cannot do anything.
    Has any other user had such a problem, and if so, how did they rectify it.
    Any advice would be greatly appreciated.
    Thanks in advance.
    clarinet99

    Try this.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up

  • Unable to remove this item from GRIR.  It was a consignment PO receipt done

    Hi Guys,
    The user saying that"unable to remove this item from GRIR.  It was a consignment PO receipt done improperly, so it needs to be deleted".
    Because of this the the material documet which shows $6725.43-(Negative) in GRIR account.when i check this this transation was originated through MI10(Physical inventory differenvces posting).May be user done wrongly.
    Now the problem is this
    -          how this transaction originated?
    -          Why is this posted to GR/IR account?
    -          How do we correct the open item in the GR/IR account?
    -          What need to happen to rectify the mistake?
    can any tell me how can we do this,i will be greatful to u.
    Thanks&Regards,
    Babu,
    09930154536

    Hi Jurgen,
    when i check the material document and accounting document,it was showing that said amount in negative sign and transaction done by MI10 means posted differences with out reference to document.
    it means the user may entered wrongly i think.
    was there any GRIR account for MI10?
    MI10 does not have reversal or cancel?
    so how to resolve it?
    as per my idea it can be done by FI posting.
    please help to resolve.
    Thanks in advance.
    Regards,
    Babu
    09930154536

  • Creating job in disabled mode

    hi,
    i created a job which calls the stored proc but i would like to create the job in disabled mode now and later when ever its needed i would like to enable it.
    need help to modify the below code.
    DECLARE
    X NUMBER;
    BEGIN
    SYS.DBMS_JOB.SUBMIT
    job => X
    ,what => 'EMPLOYEE_PROC;'
    ,next_date => TRUNC(LAST_DAY(SYSDATE)) + 1
    ,interval => 'TRUNC(LAST_DAY(SYSDATE)) + 1'
    ,no_parse => FALSE
    END;
    /

    Hi,
    You can create the job without specifying the interval. Later, you can use dbms_job.change / dbms_job.interval to change the interval.
    Something like,
    DECLARE
    X NUMBER;
    BEGIN
    SYS.DBMS_JOB.SUBMIT
    job => X
    ,what => 'EMPLOYEE_PROC;'
    ,next_date => TRUNC(LAST_DAY(SYSDATE)) + 1
    ,interval => null
    ,no_parse => FALSE
    END;
    /-Arun

  • Job submission failed : error occurred while scheduling the job. org.quartz.objectalreadyexistsexception: unable to store job with name

    Experts,
    Please help me out here,Am facing this issue while scheduling a job in BIPublisher.
    job submission failed : error occurred while scheduling the job. org.quartz.objectalreadyexistsexception: unable to store job with name
    Thanks,

    You are probably installing on a hardened machine.
    The "installation guide" says that if you are doing so, you need to create a file named libx11.so.4 and update your LD_LIBRARY_PATH (see http://docs.iplanet.com/docs/manuals/messaging/ims52/ig/unix/overview.htm)but:
    1- the library name is libX11.so.4 and
    2- for jre a common file is not enough, you need to install SUNWxwplt at least. This will install the library on /usr/openwin/lib.
    You can check the results running <server-root>/bin/base/jre/bin/jre
    Hope that helps and sorry about my poor english.

  • Unable to remove manager field in AD through OIM 9.1

    Hi,
    I am trying to remove the manager of a user in the AD Profile without changing the Manager ID in the OIM Profile. I am getting the below error when I try to modify the attribute manager by replacing it with a null string.
    LDAP: error code 21 - 00000057: LdapErr: DSID-OC090B8A, comment: Error in attribute conversion operation, data 0, v1db1)
    I am getting the same error even if I am trying to change the manager field in AD without changing the manager field in OIM.
    I am trying with the below code;
    BasicAttributes at = new BasicAttributes();
    at.put("manager","");
    context.modifyAttribute(UserDN,2,at);
    What could possibly be the reason for this error? Please help guys.
    Edited by: User_OIM on Dec 27, 2012 7:06 PM

    Check if below works for you
    +// Specify the changes to make+
    ModificationItem[] mods = new ModificationItem[1];
    +// Remove the "manager" attribute+
    mods[2] = new ModificationItem(DirContext.REMOVE_ATTRIBUTE,
    new BasicAttribute("manager"));
    +// Perform the requested modifications on the named object+
    context.modifyAttributes(UserDN, mods);

  • When trying to install itunes on my PC, I get the message (unable to remove the older version of Bonjour as well as the message unable to remove the older version of Apple software update). Please advise how to proceed.

    Please help with this problem. When trying to install itunes on my HP520 PC, I get the error message (unable to remove the older version of Bonjour as well as the message unable to remove the older version of Apple software update).

    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get aCode 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any Apple Software Updateentries and click "Remove", as per the following screenshot:
    Next, select any Bonjour entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install using an iTunesSetup.exe (or iTunes64Setup.exe) downloaded from the Apple Website:
    http://www.apple.com/itunes/download/
    Does it go through properly this time?

Maybe you are looking for