Unable to remove Keep with Previous Pgf

On the Paragraph Designer tab, once the tick boxes on Keep with Previous Pgf have been checked, I am unable to remove the checks/settings. I untick them and try to apply the new settings, but the ticks reappear every time.
I am using FM 10 on Win 7

Please untick it two times and click apply
Harpreet

Similar Messages

Imesh has taken over your browser I am unable to remove it with system restore or add and remove programmes Help!

Your browser is preceded by something calling itself imesh it takes pride of place in your browser slot or window whatever you call it.
As I have said I can't rid myself of it via system restore or in the add & remove programmes part of my X P version of windows.
It's still there when I re-downloaded Firefox it's planted itself within my other browsers as well, Safari, Chrome and I think it's got into Internet Explorer too.'''bold text'''

Sheesh. That looks hard. I think it will fall over at this point:
"Connect to my Exchange mailbox using HTTP" 'cos Thunderbird uses only the regular email protocols: POP, IMAP and SMTP.
Here (at work) we have in the past have had IMAP and SMTP enabled on our Exchange server so Thunderbird could then connect just like to any other regular internet-based service.
With the change here to outlook365/outlook 2010 I've had to switch to using DavMail which lets Thunderbird talk to the mail server using OWA.
I haven't (seriously) tried Exquilla. Whilst I have great respect for its author and some of his other add-ons, I saw no reason to use an add-on that required payment when DavMail works for free.

Unable to remove product with code 4934d1ea-be46-48b1-8847-f1af20e892c1

This is still a problem with installing CU5.
Do you have just a few less than an infinite number of monkeys writing your code these days?
-=Chris

Hi Chris,
From your description, I recommend you check if there is an interim update named "Security Update for Exchange Server 2013 Cumulative Update 1 (KB2874216) 15.0.620.34". If yes, please uninstall this interim update and then continue the CU5 installation.
For more information, here is a similar thread for your reference.
Exchange 2013 failed CU1 to CU5 update. Trying to get CU1 working again
http://social.technet.microsoft.com/Forums/en-US/4134244f-983c-4b6a-866a-20829009516c/exchange-2013-failed-cu1-to-cu5-update-trying-to-get-cu1-working-again?forum=exchangesvrdeploy
Hope it helps.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Amy Wang
TechNet Community Support

Did "Keep with following paragraph" get fixed?

In 08 if you use "Keep with following paragraph" on a paragraph (or style for a paragraph) that falls at the bottom of a page, Pages won't push it to the next page to keep it with the next paragraph.
This bug was present (and reported) since version 1.0 of Pages. So we're at what, now...3 or 4 full versions and a couple years, without a fix, for such a huge, glaring pagination bug.
I own 08 and want to upgrade to 09. Can someone please tell me if this pagination bug was fixed?
Thanks!

santranyc wrote:
In 08, the behavior is as follows:
Say Paragraph A is followed by Paragraph B.
You set Paragraph A with "Keep with following paragraph" to make sure A and B are always on the same page.
If Paragraph A falls at the bottom of a page, however, Pages does NOT push it to the next page, as it should (according to the fact that you set the attribute "Keep with following paragraph" to be turned ON for Paragraph A).
Try the following in Pages '08.
1. Fill a page with empty paragraphs.
2. On the very last line on that page, type "hello".
3. In the Inspector, set it to "Keep with following paragraph".
4. Hit return at the end of "hello", to create a new paragraph.
The new paragraph is created and hello follows it to the new page.
5. Remove "Keep with following paragraph" from "hello".
The word hello moves back to page one.
That is the behaviour. It does not cover all cases you want, but it works as it does.
Now, still in '08 do the following.
1. Three lines from the end of page 1, add three paragraphs, each with the word "hello".
2. Add a few more paragraphs of the same kind, so you spill over to next page.
3. Click on "Keep..." for all the hello-lines.
Nothing happens. I guess you expect something to happen.
Now, in '09, do the same:
1. Three lines from the end of page 1, add three paragraphs, each with the word "hello".
2. Add a few more paragraphs of the same kind, so you spill over to next page.
3. Click on "Keep..." for all the hello-lines.
Now all the hello-lines are moved over to page 2.
Is there any other case you worry about?

After updating iTunes to 11.0.1.12 and updating Apple TV to 5.1.1 my Apple TV is no longer picking up my photo library. It just keeps saying "loading library" but never brings the pictures up. This didn't happen with previous versions. Any ideas?

After updating iTunes to 11.0.1.12 and updating Apple TV to 5.1.1 my Apple TV is no longer picking up my photo library. It just keeps saying "loading library" but never brings the pictures up. It also tells me that home sharing isn't on even though it is and then I have to turn it off and on on the PC so the Apple TV even recognizes the photo library. These issues didn't happen with previous versions. Any ideas?

Update on my previous comment. I have solved my issue. Issue was with Windows 7 firewall not operating correctly. I was unable to add itunes to the 'Allow programs to communicate through windows firewall'. Found the following page useful http://answers.microsoft.com/en-us/windows/forum/windows_7-security/windows-fire wall-cant-change-some-of-your-settings/514d78fb-39e9-47b1-b561-bc49cbdad904
Followed the instructions to the foot of the page, restarted PC, normal service resumed on windows firewall, added itunes to list to communicate through firewall. restarted itunes, restarted appletv, success!!!
Hope this may help somone else.

If I completely fill my hard drive 500Gb how time machine will keep working having 1Tb of total space, I mean I have to delete mu hard drive but how I keep my previous information on time machine and keep using to with new information?

If I completely fill my hard drive 500Gb how time machine will keep working having 1Tb of total space [externak hard drive], I mean I have to delete my hard drive but how I keep my previous information on time machine and keep using it with new information?

Time Machine does not provide archival storage.
If you delete a file from your disk it will eventually be deleted from your TM backup without any notice to you.
You need a second external disk to use for archival storage.
You also need a third disk for backups of the second disk.

HT1349 I can not install iTunes on my PC, I get an error message: "Unable to remove the previous version of Apple Software Update". How should I resolve this problem.

I can not install iTunes on my PC, I get an error message: "unable to remove previous version Apple Software Update"

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get aCode 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any Apple Software Updateentries and click "Remove", as per the following screenshot:
Next, select any Bonjour entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install using an iTunesSetup.exe (or iTunes64Setup.exe) downloaded from the Apple Website:
http://www.apple.com/itunes/download/
Does it go through properly this time?

Apple mail problem message reads - Account removal failed with error: "The operation couldn't be completed. Unable to find an account for the UID given.".

Account removal failed with error: “The operation couldn’t be completed. Unable to find an account for the UID given.”. - trying to remove account but get this message please help

Try to remove the account in the Internet Accounts preference pane.

I have the new iOS 6.1.2 on my iPad. My wifi connects to my home network but keeps dropping it and won't reconnect. Did not have this problem with previous iOS.

I have the new iOS 6.1.2 on my iPad. My wifi connects to my home network but keeps dropping it and won't reconnect. Did not have this problem with previous iOS. Apple, you have a quality assurance issue. Don't be like Microsoft where they send out pieces of junk with testing it.

Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Unable to remove LiveCycle rights with custom actions

Hello
I've a problem with the action wizard in Acrobat Pro.
I'd like to remove the LiveCycle right from a PDF. My right is so that I'm allowed to change everything but with such a protection I'm unable to load those on the iPad, so I'would like to remove them.
Manually I can remove the right with the "Remove Security" in the Secure menu, but when I'd like to remove them with a batch process, but there it doesn't work anymore.
I followed the instruction from an older Post http://blogs.adobe.com/acrobatforlifesciences/2010/04/removing_security_from_pdfs_in/ but doesn't work either.
Can someone explaine me the right steps to remove the LiveCycle Right with an custom action?
Thanks
P.S. I work with the newest Windows version of Adobe Acrobat XI Pro.

Read the instructions in my blog: http://acrobatninja.com/2013/04/acrobat-XI-actions-encryption.html

HT5622 How to keep my previous apps on my ipad with new ones that i purchased recently from iTunes

How to keep my previous apps on my ipad with new ones that i purchased from iTunnes recently? i should note that i create new apple ID for my computer help friends.

Apps and other itunes content are tied to the AppleId used to purchase them. They cannot be transferred.

Unable to find the Add-on SAP_BS_FND Keep with Vendor Key

I am upgrading from EHPI Support Pack Stack 3 to Stack4, I am now stuck at the Configuration stage of the roadmap phase IS_SELECT - Keep the present version of the add-on (Keep (with vendor
key)). I wanted to keep the add-on SAP_BS_FOUNDATION with Stack 3 asthere is no Stack 4.
How to find the Key information or the note. Also please find the attached Screenshot of the same.
Regards,
Karthik Ravoori

Hi Mukesh Kakani,
In case you have installed an SEM, E-Recruiting or SAP Learning Management system, which technically means that an SAP ERP software component (ERECRUIT, SEM-BW, FINBASIS or LSOFE) is installed in your SAP NetWeaver system, you must not use a stack configuration file created for an SAP ERP system. Instead, you have to use a stack configuration file for SAP NetWeaver (either downloaded from SAP Service Marketplace or created by SAP Solution Manager Maintenance
Optimizer)."
So you qualify in this pre-condition: you have SEM-BW and FINBASIS installed on your NetWeaver system
"Maintain your SEM, E-Recruiting or SAP Learning Management system as an ERP system in SMSY in order to download the EHP packages and to be able to maintain the system. Afterwards you must not use the generated Stack XML, but instead use a generated Stack XML from SAP Service Marketplace and include the packages for ERECRUIT, SEM-BW, FINBASIS or LSOFE in the IS_SELECT phase during the installation of EHP1 for SAP NetWeaver 7.0."
In order to for you to proceed, you are able to apply SP4 using SPAM and JSPM. But when upgrading the next system in your landscape, please alternate XML file as proposed above. This will prevent the installation of the ECC component SAP_BS_FND and avoid the reoccurance of this issue.
Regards
Karthik Ravoori

One-to-many selfjoin removing records with the same ranking or with a substitute

Sorry for my bad choice of discussion title, feel free to suggest me a more pertinent one
I've rewritten post for clarity and following the FAQ.
DB Version
I'm using Oracle Enterprise 10g 10.2.0.1.0 64bit
Tables involved
CREATE TABLE wrhwr (
wr_id INTEGER PRIMARY KEY,
eq_id VARCHAR2(50) NULL,
date_completed DATE NULL,
status VARCHAR2(20) NOT NULL,
pmp_id VARCHAR2(20) NOT NULL,
description VARCHAR2(20) NULL);
Sample data
INSERT into wrhwr VALUES (1,'MI-EXT-0001',date'2013-07-16','Com','VER-EXC','Revisione')
INSERT into wrhwr VALUES (2,'MI-EXT-0001',date'2013-07-01','Com','VER-EXC','Verifica')
INSERT into wrhwr VALUES (3,'MI-EXT-0001',date'2013-06-15','Com','VER-EXC','Revisione')
INSERT into wrhwr VALUES (4,'MI-EXT-0001',date'2013-06-25','Com','VER-EXC','Verifica')
INSERT into wrhwr VALUES (5,'MI-EXT-0001',date'2013-04-14','Com','VER-EXC','Revisione')
INSERT into wrhwr VALUES (6,'MI-EXT-0001',date'2013-04-30','Com','VER-EXC','Verifica')
INSERT into wrhwr VALUES (7,'MI-EXT-0001',date'2013-03-14','Com','VER-EXC','Collaudo')
Query used
SELECT *
FROM (SELECT eq_id,
               date_completed,
               RANK ()
               OVER (PARTITION BY eq_id
                     ORDER BY date_completed DESC NULLS LAST)
                  rn
          FROM wrhwr
         WHERE     status != 'S'
               AND pmp_id LIKE 'VER-EX%'
               AND description LIKE '%Verifica%') table1,
       (SELECT eq_id,
               date_completed,
               RANK ()
               OVER (PARTITION BY eq_id
                     ORDER BY date_completed DESC NULLS LAST)
                  rn
          FROM wrhwr
         WHERE     status != 'S'
               AND pmp_id LIKE 'VER-EX%'
               AND description LIKE '%Revisione%') table2,
       (SELECT eq_id,
               date_completed,
               RANK ()
               OVER (PARTITION BY eq_id
                     ORDER BY date_completed DESC NULLS LAST)
                  rn
          FROM wrhwr
         WHERE     status != 'S'
               AND pmp_id LIKE 'VER-EX%'
               AND description LIKE '%Collaudo%') table3
WHERE     table1.eq_id = table3.eq_id
       AND table2.eq_id = table3.eq_id
       AND table1.eq_id = table2.eq_id
Purpose of the above query is to selfjoin wrhwr table 3 times in order to have for every row:
eq_id;
completition date of a work request of type Verifica for this eq_id (table1 alias);
completition date of a wr of type Revisione (table2 alias) for this eq_id;
completition date of a wr of type Collaudo (table3 alias) for this eq_id;
A distinct eq_id:
can have many work requests (wrhwr records) with different completition dates or without completition date (date_completed column NULL);
in a date range can have all the types of wrhwr ('Verifica', 'Revisione', 'Collaudo') or some of them (ex. Verifica, Revisione but not Collaudo, Collaudo but not Verifica and Revisione, etc.);
substrings in description shouldn't repeat;
(eq_id,date_completed) aren't unique but (eq_id,date_completed,description,pmp_id) should be unique;
Expected output
Using sample data above I expect this output:
eq_id,table1.date_completed,table2.date_completed,table3.date_completed
MI-EXT-001,2013-07-01,2013-07-16,2013-03-14 <--- for this eq_id table3 doesn't have 3 rows but only 1. I want to repeat the most ranked value of table3 for every result row
MI-EXT-001,2013-07-01,2013-06-15,2013-03-14 <-- I don't wanna this row because table1 and table2 have both 3 rows so the match must be in rank terms (1st,1st) (2nd,2nd) (3rd,3rd)
MI-EXT-001,2013-06-25,2013-06-15,2013-03-14 <-- 2nd rank of table1 joins 2nd rank of table2
MI-EXT-001,2013-04-30,2013-04-14,2013-03-14 <-- 1st rank table1, 1st rank table2, 1st rank table3
In vector style syntax, expected tuple output must be:
ix = i-th ranking of tableX
(i1, i2, i3) IF EXISTS an i-th ranking row in every table
ELSE
(i1, b, b)
where b is the first available lower ranking of table2 OR NULL if there isn't any row of lower ranking.
Any clues?
With the query I'm unable to remove "spurius" rows.
I'm thinking at a solution based on analytic functions like LAG() and LEAD(), using ROLLUP() or CUBE(), using nested query but I would find a solution elegant, easy, fast and easy to maintain.
Thanks

FrankKulash ha scritto:
About duplicate dates: I was most interested in what you wanted when 2 (or more) rows with the same eq_id and row type (e.g. 'Collaudo') had exactly the same completed_date.
In the new results, did you get the columns mixed up? It looks like the row with eq_id='MI-EXT-0002' has 'Collaudo' in the desciption, but the date appears in the verifica column of the output, not the collaudo column.
Why don't you want 'MI-EXT-0001' in the results? Is it realted to the non-unique date?
For all optimization questions, see the forum FAQ:https://forums.oracle.com/message/9362003
If you can explain what you need to do in the view (and post some sample data and output as examples) then someone might help you find a better way to do it.
It looks like there's a lot of repetition in the code. Whatever you're trying to do, I suspect there's a simpler, more efficient way to do it.
About Duplicate dates: query must show ONLY one date_completed and ignore duplicated. Those records are "bad data". You can't have 2 collaudos with the same date completed.
Collaudo stands for equipment check. A craftperson does an equipment check once a day and, with a mobile app, update the work request related to equipment and procedure of preventive maintenance, so is impossibile that complete more than one check (Collaudo) in a day, by design.
In the new results, it's my fault: during digitation I've swapped columns
With "I don't want 'MI-EXT-0001'" I mean: "I don't want to show AGAIN MI-EXT-0001. In the previous post was correct the output including MI-EXT-0001.
Regarding optimisation...
repetition of
LAST_VALUE (
                        MIN (CASE WHEN r_type = THEN column_name END) IGNORE NULLS)
                     OVER (PARTITION BY eq_id ORDER BY r_num) AS alias_column_name
is because I don't know another feasible way to have all columns needed of table wrhwr in main query, maintaining the correct order. So i get them in got_r_type and propagate them in all the subquery.
In main query I join eq table (which contains all the information about a specific equipment) with "correct" dates and columns of wrhwr table.
I filter eq table for the specific equipment standard (eq_std column).
efm_eq_tablet table and where clause
AND e.eq_id = e2.eq_id
          AND e2.is_active = 'S';
means: show only rows in eq table that have an equal row in efm_eq_tablet table AND are active (represented by 'S' value in is_active column).
About the tables v2, r2 and c2
          (SELECT doc_data, doc_data_rinnovo, eq_id
             FROM efm_doc_rep edr
            WHERE edr.csi_id = '1011503' AND edr.doc_validita_temp = 'LIM') v2,
          (SELECT doc_data, doc_data_rinnovo, eq_id
             FROM efm_doc_rep edr
            WHERE     eq_id = edr.eq_id
                  AND edr.csi_id = '1011504'
                  AND edr.doc_validita_temp = 'LIM') r2,
          (SELECT doc_data, doc_data_rinnovo, eq_id
             FROM efm_doc_rep edr
            WHERE     edr.csi_id IN ('1011505', '1011507')
                  AND edr.doc_validita_temp = 'LIM'
                  AND adempimento_ok = 'SI') c2,
Those tables contains "alternate" dates of completition to be used when there isn't any wrhwr row for an eq_id OR when all date_completed are NULL.
NVL() and NVL2() functions are used in main query in order to impletement this.
The CASE/WHEN blocks inside main query implements the behavior of selecting the correct date based of the above conditions.

Dedupratio in multihost environment - unable to remove slave

Using six virtual machine, each with four disk, dedupratio=2:
hd=N1,system=10.43.13.38,user=root,shell=ssh,jvms=4
hd=N2,system=10.43.13.39,user=root,shell=ssh,jvms=4
hd=N3,system=10.43.13.40,user=root,shell=ssh,jvms=4
hd=N4,system=10.43.13.41,user=root,shell=ssh,jvms=4
hd=N5,system=10.43.13.42,user=root,shell=ssh,jvms=4
hd=N6,system=10.43.13.43,user=root,shell=ssh,jvms=4
sd=sd1,host=*,lun=/dev/sdb,openflags=o_direct,threads=96
sd=sd2,host=*,lun=/dev/sdc,openflags=o_direct,threads=96
sd=sd3,host=*,lun=/dev/sdd,openflags=o_direct,threads=96
sd=sd4,host=*,lun=/dev/sde,openflags=o_direct,threads=96
wd=wd1,sd=sd1,xfersize=4k,rdpct=80
wd=wd2,sd=sd2,xfersize=4k,rdpct=80
wd=wd3,sd=sd3,xfersize=4k,rdpct=80
wd=wd4,sd=sd4,xfersize=4k,rdpct=80
rd=default,curve=(10,30,50,70,90,92,94,96,98,100),iorate=curve,interval=1,warmup=5,elapsed=200,pause=0,maxdata=10t
rd=run1,wd=wd*
When I run the vdbench -f parmfile command I receive this error:
20:03:04.118 input argument scanned: '-fPOCvdb1'
20:03:04.293 *
20:03:04.293 * In order for Dedup to remember which data patterns have been written and
20:03:04.294 * which data patterns they can be replaced with, Dedup has activated a
20:03:04.294 * subset of Data Validation. Data Validation will only be used to keep
20:03:04.294 * track of data patterns. It will not be used to validate data, unless
20:03:04.294 * of course specifically requested.
20:03:04.295 *
20:03:04.344
20:03:04.344 unable to remove slave=N4-3,wg=wd4
20:03:04.344
java.lang.RuntimeException: unable to remove slave=N4-3,wg=wd4
        at Vdb.common.failure(common.java:306)
        at Vdb.common.failure(common.java:263)
        at Vdb.RD_entry.removeUnwantedWorkloads(RD_entry.java:2015)
        at Vdb.RD_entry.createWgListForOneRd(RD_entry.java:1812)
        at Vdb.RD_entry.buildNewRdListForWd(RD_entry.java:1625)
        at Vdb.Vdbmain.masterRun(Vdbmain.java:697)
        at Vdb.Vdbmain.main(Vdbmain.java:577)
If I reduce the number of hosts to 3 the error disappear and it work.

Please include a complete copy of the failed Vdbench output directory.
Henk.

Unable to remove Quick Time - getting a 'fatal error' message

Hi
I have two issues, both related I think to not being able to get onto itunes
I get an error message on the itunes home page saying it failed to initialize the plug ins and then closes down.
Also I am unable to remove Quick Time - I get a message saying a fatal error occured and it will not let me continue. I was hoping to remove both itunes which I had previously loaded, and remove Quick Time so that I could start again, although the whole thing is wearing me out

Managed to remove and reload Quick Time but this has not fixed the problem. still having trouble with Plugins on the Itunes homepage - can't move forward with this totally stuck
Any help would be appreciated

Unable to remove Keep with Previous Pgf

Similar Messages

Maybe you are looking for