Unable to remove product with code 4934d1ea-be46-48b1-8847-f1af20e892c1
This is still a problem with installing CU5.
Do you have just a few less than an infinite number of monkeys writing your code these days?
-=Chris
Hi Chris,
From your description, I recommend you check if there is an interim update named "Security Update for Exchange Server 2013 Cumulative Update 1 (KB2874216) 15.0.620.34". If yes, please uninstall this interim update and then continue the CU5 installation.
For more information, here is a similar thread for your reference.
Exchange 2013 failed CU1 to CU5 update. Trying to get CU1 working again
http://social.technet.microsoft.com/Forums/en-US/4134244f-983c-4b6a-866a-20829009516c/exchange-2013-failed-cu1-to-cu5-update-trying-to-get-cu1-working-again?forum=exchangesvrdeploy
Hope it helps.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Amy Wang
TechNet Community Support
Similar Messages
-
Unable to remove Keep with Previous Pgf
On the Paragraph Designer tab, once the tick boxes on Keep with Previous Pgf have been checked, I am unable to remove the checks/settings. I untick them and try to apply the new settings, but the ticks reappear every time.
I am using FM 10 on Win 7Please untick it two times and click apply
Harpreet -
Unable to remove product from My Support Profile
Good Evening. I have an iPhone 4S. I will be giving this phone to a family member. I have followed Apples on-line instructions on What to do before selling or giving away your iPhone. (phone has been re-set to factory settings and removed from iCloud). I then visited the Apple My Support Profile page, it listed the iPhone 4S and the Serial Number. I then clicked on Remove Product but this function does not appear to be working (the status indicator just keeps spinning). I need to be able to remove this from my profile. Any suggestions? Thanks so much (note: for some reason, I was not able to post this under iPhone community?)
If that happened to me, I would try the following series of steps:
Connect your iPhone to iTunes. Go to the iPhone's Music tab in iTunes. Uncheck the "Sync Music" so the music will not be synced. Click "Apply" in the lower right.
The previous step should have removed all music from your iPhone. But you will probably find the old songs/albums remaining behind. Delete them from your iPhone.
Check the "Sync Music" box in iTunes again and "Apply" again. That should reload all music from iTunes to your iPhone and solve the issue. -
Your browser is preceded by something calling itself imesh it takes pride of place in your browser slot or window whatever you call it.
As I have said I can't rid myself of it via system restore or in the add & remove programmes part of my X P version of windows.
It's still there when I re-downloaded Firefox it's planted itself within my other browsers as well, Safari, Chrome and I think it's got into Internet Explorer too.'''bold text'''Sheesh. That looks hard. I think it will fall over at this point:
"Connect to my Exchange mailbox using HTTP" 'cos Thunderbird uses only the regular email protocols: POP, IMAP and SMTP.
Here (at work) we have in the past have had IMAP and SMTP enabled on our Exchange server so Thunderbird could then connect just like to any other regular internet-based service.
With the change here to outlook365/outlook 2010 I've had to switch to using DavMail which lets Thunderbird talk to the mail server using OWA.
I haven't (seriously) tried Exquilla. Whilst I have great respect for its author and some of his other add-ons, I saw no reason to use an add-on that required payment when DavMail works for free. -
I have two issues. 1) unable to update Acrobat XI Pro and 2) unable to register product
First issue: I have for the second time installed Acrobat xi pro and then click on "check for updates" from the help menu. And it shows that an update is available. But when I update it I am given the following error message:
Error 1328. Error applying patch to file C:\Config.Msi\PT669B.tmp. It has probably been updated by other means, and can no longer be modified by this patch. For more information contact your patch vendor."
When I click on "details" I am sent to adobe's "update error" page. Which states the following for error 1328: Error applying patch to [filename]. It's likely that something else updated the file, and the patch can't modify it. For more information, contact your patch vendor.
I have tried uninstalling program and re-installing program but still get same error message from my attempt at updating. So I am not sure if program is update or not. And I do not know who my "patch vendor" is.
Second issue: Unable to register product with Adobe. Because the option to do so from the "help" menu which lists "product registration" is greyed/dimmed out. Therefore not giving me the ability to register this product. Please let me know what is causing this problem.I am not sure, but will suggest some things to try. On the activate issue, it may be that your system already thinks it is activated and so you might try the deactivate and check. If that works, I would suggest you then uninstall, run http://labs.adobe.com/downloads/acrobatcleaner.html, remove anything left of the Acrobat folder, reboot, and reinstall. Hopefully you can open Acrobat and activate. Then do the updates from the Help menu.
-
I have remote locked my mac using find my iPhone app via my iPad - I am unable to enter the unlock code as the mac keyboard won't pair with the mac - I guess that will teach me for playing...any ideas?
Thought so - ace - find my phone really needs an unlock function. - another £40...
-
Unable to create Product group form T Code- MC84 in ECC 6.0
Dear Expert,
After Upgrade from 4.7E to ECC 6.0 we are facing problem for Tcode-MC84(Create Product Group) is opening but we are unable to Create product group..
can any tell me what is problem for this or is there any apply SAP Note for this.
Thanks in advance,
Regards,
Kumar,Hi,
I think for some particular versions you can create a product group directly using T code MC84, and if u have got a material type say PROD-Product group,then use mm01 for creating a product group. And then you can do the change in MC86 for product group.
Refer thread:
https://forums.sdn.sap.com/click.jspa?searchID=15761932&messageID=5854286
Regards,
R.Brahmankar
Edited by: R Brahmankar on Sep 1, 2008 12:42 PM -
Unable to select multiple with holding tax codes.
This entry already exists in the following tables '' (ACPR) (ODBC -2035) [Message 131-183]Hi,
Actually this is an application error in 2007 A and there is no version/PL to fix this issue.
Refer SAP note 1260874 - Cannot add a new BP with ITW tax code
Thanks & Regards,
Nagarajan -
I have problems when using the camera on my iPhone 4S (the same for my daughter with a iPhone4)
A veil around the blurred photo, a development impossible and completely unable to read the bar code or QR code. What to do?Sounds kind of stupid, but check to make sure that your iphone case cover is not blocking the edge of the camera lens. I had a silicone case on my 3S and when it got older, it started tot slip and the edges of my pictures were blurred.
-
Account removal failed with error: “The operation couldn’t be completed. Unable to find an account for the UID given.”. - trying to remove account but get this message please help
Try to remove the account in the Internet Accounts preference pane.
-
I can not register this product with the code supplied? [was:Photoshop]
I can not register this product with the code supplied?
Welcome to the forum.
Along with Trevor's important questions, I have a few more, please:
Did you buy Ps directly from Adobe (the Adobe Store), or from a certified reseller, such as directly from Amazon?
Did you buy Ps with physical media, or as a download?
If the former, did you get the S/N from the envelope that the media came in?
If the latter, did you get the S/N directly via e-mail from Adobe?
Do you get any error messages?
If so, what is the exact text of each one?
When you say "register," do you mean Activation, or actually registering with Adobe?
Good luck,
Hunt -
Unable to remove LiveCycle rights with custom actions
Hello
I've a problem with the action wizard in Acrobat Pro.
I'd like to remove the LiveCycle right from a PDF. My right is so that I'm allowed to change everything but with such a protection I'm unable to load those on the iPad, so I'would like to remove them.
Manually I can remove the right with the "Remove Security" in the Secure menu, but when I'd like to remove them with a batch process, but there it doesn't work anymore.
I followed the instruction from an older Post http://blogs.adobe.com/acrobatforlifesciences/2010/04/removing_security_from_pdfs_in/ but doesn't work either.
Can someone explaine me the right steps to remove the LiveCycle Right with an custom action?
Thanks
P.S. I work with the newest Windows version of Adobe Acrobat XI Pro.Read the instructions in my blog: http://acrobatninja.com/2013/04/acrobat-XI-actions-encryption.html
-
IS there a link for Adobe 9 Standard to download with my product key code somewhere?
Hi Michele Morris,
You can download the Installer Package for Acrobat 9 Standard from this Link - https://files.acrobat.com/a/preview/1677e343-25c3-409b-a89b-d324552e07ce
and for Your Product Code/ Serial No, Please refer this Link - Find your serial number quickly
Hope that Helps
Regards,
Rahul Tyagi -
Newbie needing help with code numbers and if-else
I'm 100% new to any kind of programming and in my 4th week of an Intro to Java class. It's also an on-line class so my helpful resources are quite limited. I have spent close to 10 hours on my class project working out P-code and the java code itself, but I'm having some difficulty because the project seems to be much more advanced that the examples in the book that appear to only be partly directly related to this assignment. I have finally come to a point where I am unable to fix the mistakes that still show up. I'm not trying to get anyone to do my assignment for me, I'm only trying to get some help on what I'm missing. I want to learn, not cheat.
Okay, I have an assignment that, in a nutshell, is a cash register. JOptionPane prompts the user to enter a product code that represents a product with a specific price. Another box asks for the quanity then displays the cost, tax and then the total amount plus tax, formatted in dollars and cents. It then repeats until a sentinel of "999" is entered, and then another box displays the total items sold for the day, amount of merchandise sold, tax charged, and the total amount acquired for the day. If a non-valid code is entered, I should prompt the user to try again.
I have this down to 6 errors, with one of the errors being the same error 5 times. Here are the errors:
C:\PROGRA~1\XINOXS~1\JCREAT~1\MyProjects\Sales.java:50: 'else' without 'if'
else //if invalid code entered, output message
^
C:\PROGRA~1\XINOXS~1\JCREAT~1\MyProjects\Sales.java:39: unexpected type
required: variable
found : value
100 = 2.98;
^
C:\PROGRA~1\XINOXS~1\JCREAT~1\MyProjects\Sales.java:41: unexpected type
required: variable
found : value
200 = 4.50;
^
C:\PROGRA~1\XINOXS~1\JCREAT~1\MyProjects\Sales.java:43: unexpected type
required: variable
found : value
300 = 6.79;
^
C:\PROGRA~1\XINOXS~1\JCREAT~1\MyProjects\Sales.java:45: unexpected type
required: variable
found : value
400 = 5.29;
^
C:\PROGRA~1\XINOXS~1\JCREAT~1\MyProjects\Sales.java:47: unexpected type
required: variable
found : value
500 = 7.20;
^
And finally, here is my code. Please be gentle with the criticism. I've really put a lot into it and would appreciate any help. Thanks in advance.
import java.text.NumberFormat; // class for numeric formating from page 178
import javax.swing.JOptionPane; // class for JOptionOPane
public class Sales {
//main method begins execution ofJava Application
public static void main( String args[] )
double quantity; // total of items purchased
double tax; // total of tax
double value; // total cost of all items before tax
double total; // total of items including tax
double totValue; // daily value counter
double totTax; // daily tax counter
double totTotal; // daily total amount collected (+tax) counter
double item; //
String input; // user-entered value
String output; // output string
String itemString; // item code entered by user
String quantityString; // quantity entered by user
// initialization phase
quantity = 0; // initialize counter for items purchased
// get first code from user
itemString = JOptionPane.showInputDialog(
"Enter item code:" );
// convert itemString to double
item = Double.parseDouble ( itemString );
// loop until sentinel value read from user
while ( item != 999 ) {
// converting code to amount using if statements
if ( item == 100 )
100 = 2.98;
if ( item == 200 )
200 = 4.50;
if ( item == 300 )
300 = 6.79;
if ( item == 400 )
400 = 5.29;
if ( item == 500 )
500 = 7.20;
else //if invalid code entered, output message
JOptionPane.showMessageDialog( null, "Invalid code entered, please try again!",
"Item Code", JOptionPane.INFORMATION_MESSAGE );
} // end if
} // end while
// get quantity of item user
itemString = JOptionPane.showInputDialog(
"Enter quantity:" );
// convert quantityString to int
quantity = Double.parseDouble ( quantityString );
// add quantity to quantity
quantity = quantity + quantity;
// calculation time! value
value = quantity * item;
// calc tax
tax = value * .07;
// calc total
total = tax + value;
//add totals to counter
totValue = totValue + value;
totTax = totTax + tax;
totTotal = totTotal + total;
// display the results of purchase
JOptionPane.showMessageDialog( null, "Amount: " + value +
"\nTax: " + tax + "\nTotal: " + total, "Sale", JOptionPane.INFORMATION_MESSAGE );
// get next code from user
itemString = JOptionPane.showInputDialog(
"Enter item code:" );
// If sentinel value reached
if ( item == 999 ) {
// display the daily totals
JOptionPane.showMessageDialog( null, "Total amount of items sold today: " + quantity +
"\nValue of ites sold today: " + totValue + "\nTotal tax collected today: " + totTax +
"\nTotal Amount collected today: " + totTotal, "Totals", JOptionPane.INFORMATION_MESSAGE );
System.exit( 0 ); // terminate application
} // end sentinel
} // end message
} // end class SalesHere you go. I haven't tested this but it does compile. I've put in a 'few helpful hints'.
import java.text.NumberFormat; // class for numeric formating from page 178
import javax.swing.JOptionPane; // class for JOptionOPane
public class TestTextFind {
//main method begins execution ofJava Application
public static void main( String args[] )
double quantity; // total of items purchased
double tax; // total of tax
double value; // total cost of all items before tax
double total; // total of items including tax
// double totValue; // daily value counter
// double totTax; // daily tax counter
// double totTotal; // daily total amount collected (+tax) counter
// Always initialise your numbers unless you have a good reason not too
double totValue = 0; // daily value counter
double totTax = 0; // daily tax counter
double totTotal = 0; // daily total amount collected (+tax) counter
double itemCode;
double item = 0;
String itemCodeString; // item code entered by user
String quantityString; // quantity entered by user
// initialization phase
quantity = 0; // initialize counter for items purchased
// get first code from user
itemCodeString = JOptionPane.showInputDialog("Enter item code:" );
// convert itemString to double
itemCode = Double.parseDouble ( itemCodeString );
// loop until sentinel value read from user
while ( itemCode != 999 ) {
* 1. variable item mightnot have been initialised
* You had item and itemCode the wrong way round.
* You are supposed to be checking itemCode but setting the value
* for item
// converting code to amount using if statements
if ( item == 100 )
{itemCode = 2.98;}
else if ( item == 200 )
{itemCode = 4.50;}
else if ( item == 300 )
{itemCode = 6.79;}
else if ( item == 400 )
{itemCode = 5.29;}
else if ( item == 500 )
{itemCode = 7.20;}
else {//if invalid code entered, output message
JOptionPane.showMessageDialog( null, "Invalid code entered, please try again!",
"Item Code", JOptionPane.INFORMATION_MESSAGE );
} // end if
} // end while
// get quantity of item user
itemCodeString = JOptionPane.showInputDialog("Enter quantity:" );
* 2.
* You have declared quantityString here but you never give it a value.
* I think this should be itemCodeString shouldnt it???
* Or should you change itemCodeString above to quantityString?
// convert quantityString to int
// quantity = Double.parseDouble ( quantityString ); // old code
quantity = Double.parseDouble ( itemCodeString );
// add quantity to quantity
quantity = quantity + quantity;
// calculation time! value
value = quantity * itemCode;
// calc tax
tax = value * .07;
// calc total
total = tax + value;
//add totals to counter
* 3. 4. and 5.
* With the following you have not assigned the 'total' variables a value
* so in effect you are saying eg. "total = null + 10". Thats why an error is
* raised. If you look at your declaration i have assigned them an initial
* value of 0.
totValue = totValue + value;
totTax = totTax + tax;
totTotal = totTotal + total;
// display the results of purchase
JOptionPane.showMessageDialog( null, "Amount: " + value +
"\nTax: " + tax + "\nTotal: " + total, "Sale", JOptionPane.INFORMATION_MESSAGE );
// get next code from user
itemCodeString = JOptionPane.showInputDialog("Enter item code:" );
// If sentinel value reached
if ( itemCode == 999 ) {
// display the daily totals
JOptionPane.showMessageDialog( null, "Total amount of items sold today: " + quantity +
"\nValue of ites sold today: " + totValue + "\nTotal tax collected today: " + totTax +
"\nTotal Amount collected today: " + totTotal, "Totals", JOptionPane.INFORMATION_MESSAGE );
System.exit( 0 ); // terminate application
} // end sentinel
} // end message
} // end class SalesRob. -
One-to-many selfjoin removing records with the same ranking or with a substitute
Sorry for my bad choice of discussion title, feel free to suggest me a more pertinent one
I've rewritten post for clarity and following the FAQ.
DB Version
I'm using Oracle Enterprise 10g 10.2.0.1.0 64bit
Tables involved
CREATE TABLE wrhwr (
wr_id INTEGER PRIMARY KEY,
eq_id VARCHAR2(50) NULL,
date_completed DATE NULL,
status VARCHAR2(20) NOT NULL,
pmp_id VARCHAR2(20) NOT NULL,
description VARCHAR2(20) NULL);
Sample data
INSERT into wrhwr VALUES (1,'MI-EXT-0001',date'2013-07-16','Com','VER-EXC','Revisione')
INSERT into wrhwr VALUES (2,'MI-EXT-0001',date'2013-07-01','Com','VER-EXC','Verifica')
INSERT into wrhwr VALUES (3,'MI-EXT-0001',date'2013-06-15','Com','VER-EXC','Revisione')
INSERT into wrhwr VALUES (4,'MI-EXT-0001',date'2013-06-25','Com','VER-EXC','Verifica')
INSERT into wrhwr VALUES (5,'MI-EXT-0001',date'2013-04-14','Com','VER-EXC','Revisione')
INSERT into wrhwr VALUES (6,'MI-EXT-0001',date'2013-04-30','Com','VER-EXC','Verifica')
INSERT into wrhwr VALUES (7,'MI-EXT-0001',date'2013-03-14','Com','VER-EXC','Collaudo')
Query used
SELECT *
FROM (SELECT eq_id,
date_completed,
RANK ()
OVER (PARTITION BY eq_id
ORDER BY date_completed DESC NULLS LAST)
rn
FROM wrhwr
WHERE status != 'S'
AND pmp_id LIKE 'VER-EX%'
AND description LIKE '%Verifica%') table1,
(SELECT eq_id,
date_completed,
RANK ()
OVER (PARTITION BY eq_id
ORDER BY date_completed DESC NULLS LAST)
rn
FROM wrhwr
WHERE status != 'S'
AND pmp_id LIKE 'VER-EX%'
AND description LIKE '%Revisione%') table2,
(SELECT eq_id,
date_completed,
RANK ()
OVER (PARTITION BY eq_id
ORDER BY date_completed DESC NULLS LAST)
rn
FROM wrhwr
WHERE status != 'S'
AND pmp_id LIKE 'VER-EX%'
AND description LIKE '%Collaudo%') table3
WHERE table1.eq_id = table3.eq_id
AND table2.eq_id = table3.eq_id
AND table1.eq_id = table2.eq_id
Purpose of the above query is to selfjoin wrhwr table 3 times in order to have for every row:
eq_id;
completition date of a work request of type Verifica for this eq_id (table1 alias);
completition date of a wr of type Revisione (table2 alias) for this eq_id;
completition date of a wr of type Collaudo (table3 alias) for this eq_id;
A distinct eq_id:
can have many work requests (wrhwr records) with different completition dates or without completition date (date_completed column NULL);
in a date range can have all the types of wrhwr ('Verifica', 'Revisione', 'Collaudo') or some of them (ex. Verifica, Revisione but not Collaudo, Collaudo but not Verifica and Revisione, etc.);
substrings in description shouldn't repeat;
(eq_id,date_completed) aren't unique but (eq_id,date_completed,description,pmp_id) should be unique;
Expected output
Using sample data above I expect this output:
eq_id,table1.date_completed,table2.date_completed,table3.date_completed
MI-EXT-001,2013-07-01,2013-07-16,2013-03-14 <--- for this eq_id table3 doesn't have 3 rows but only 1. I want to repeat the most ranked value of table3 for every result row
MI-EXT-001,2013-07-01,2013-06-15,2013-03-14 <-- I don't wanna this row because table1 and table2 have both 3 rows so the match must be in rank terms (1st,1st) (2nd,2nd) (3rd,3rd)
MI-EXT-001,2013-06-25,2013-06-15,2013-03-14 <-- 2nd rank of table1 joins 2nd rank of table2
MI-EXT-001,2013-04-30,2013-04-14,2013-03-14 <-- 1st rank table1, 1st rank table2, 1st rank table3
In vector style syntax, expected tuple output must be:
ix = i-th ranking of tableX
(i1, i2, i3) IF EXISTS an i-th ranking row in every table
ELSE
(i1, b, b)
where b is the first available lower ranking of table2 OR NULL if there isn't any row of lower ranking.
Any clues?
With the query I'm unable to remove "spurius" rows.
I'm thinking at a solution based on analytic functions like LAG() and LEAD(), using ROLLUP() or CUBE(), using nested query but I would find a solution elegant, easy, fast and easy to maintain.
ThanksFrankKulash ha scritto:
About duplicate dates: I was most interested in what you wanted when 2 (or more) rows with the same eq_id and row type (e.g. 'Collaudo') had exactly the same completed_date.
In the new results, did you get the columns mixed up? It looks like the row with eq_id='MI-EXT-0002' has 'Collaudo' in the desciption, but the date appears in the verifica column of the output, not the collaudo column.
Why don't you want 'MI-EXT-0001' in the results? Is it realted to the non-unique date?
For all optimization questions, see the forum FAQ:https://forums.oracle.com/message/9362003
If you can explain what you need to do in the view (and post some sample data and output as examples) then someone might help you find a better way to do it.
It looks like there's a lot of repetition in the code. Whatever you're trying to do, I suspect there's a simpler, more efficient way to do it.
About Duplicate dates: query must show ONLY one date_completed and ignore duplicated. Those records are "bad data". You can't have 2 collaudos with the same date completed.
Collaudo stands for equipment check. A craftperson does an equipment check once a day and, with a mobile app, update the work request related to equipment and procedure of preventive maintenance, so is impossibile that complete more than one check (Collaudo) in a day, by design.
In the new results, it's my fault: during digitation I've swapped columns
With "I don't want 'MI-EXT-0001'" I mean: "I don't want to show AGAIN MI-EXT-0001. In the previous post was correct the output including MI-EXT-0001.
Regarding optimisation...
repetition of
LAST_VALUE (
MIN (CASE WHEN r_type = THEN column_name END) IGNORE NULLS)
OVER (PARTITION BY eq_id ORDER BY r_num) AS alias_column_name
is because I don't know another feasible way to have all columns needed of table wrhwr in main query, maintaining the correct order. So i get them in got_r_type and propagate them in all the subquery.
In main query I join eq table (which contains all the information about a specific equipment) with "correct" dates and columns of wrhwr table.
I filter eq table for the specific equipment standard (eq_std column).
efm_eq_tablet table and where clause
AND e.eq_id = e2.eq_id
AND e2.is_active = 'S';
means: show only rows in eq table that have an equal row in efm_eq_tablet table AND are active (represented by 'S' value in is_active column).
About the tables v2, r2 and c2
(SELECT doc_data, doc_data_rinnovo, eq_id
FROM efm_doc_rep edr
WHERE edr.csi_id = '1011503' AND edr.doc_validita_temp = 'LIM') v2,
(SELECT doc_data, doc_data_rinnovo, eq_id
FROM efm_doc_rep edr
WHERE eq_id = edr.eq_id
AND edr.csi_id = '1011504'
AND edr.doc_validita_temp = 'LIM') r2,
(SELECT doc_data, doc_data_rinnovo, eq_id
FROM efm_doc_rep edr
WHERE edr.csi_id IN ('1011505', '1011507')
AND edr.doc_validita_temp = 'LIM'
AND adempimento_ok = 'SI') c2,
Those tables contains "alternate" dates of completition to be used when there isn't any wrhwr row for an eq_id OR when all date_completed are NULL.
NVL() and NVL2() functions are used in main query in order to impletement this.
The CASE/WHEN blocks inside main query implements the behavior of selecting the correct date based of the above conditions.
Maybe you are looking for
-
Hi, I have a flat file with this kind of value - " 20140713 " . To take this value in DB Table I set the data type of this column in flat file manager - string [DT_STR] 50, But in destination table It is set as date [date] NULL while process this fil
-
How do I backup photos to an external drive (like a passport drive)
I have photos in iphoto that I want to backup on an external drive. What process do I use?
-
Installed SL, now Preview won't open my .PICT files
I use .pict files for photos in my QuarkXpress layouts. Preview doesn't recognize them, now that I've installed 10.6 SL. I got a window suggesting that I check the"Opne in 32-bit mode" but that didn't help. Help! I'm up against publication deadlines
-
Getting feedback -- how many reviewers do you need?
I'd like to draw on the experience of this group. The Beta of our first training lesson is complete. We did a careful internal review with a group of subject experts who offered detailed feedback. Next, we offered it to a variety of managers and th
-
Hi, I'm not tech savvy at all when it comes to computers. I have a HP laptop that i got for christmas in 2008 and im wanting to know if it would be cheaper to upgrade my computer, like ram, memory, os, and such or just get a new computer all together