Unable to Remove Registered Webservice in OEG 11.1.1.6.1

Hi
I've installed OEG 11.1.1.6.1 in my Windows 7 professional system also registered a webservice (running weblogic) successfully also deployed.
When i plan to remove the registered webservice I'm getting the below error,
The "OrderService" web service is used and can not be deleted. Please make sure there is no references to the web service and try again.
Here I've not even deployed and never used the url.
It is working (remove) well in 11.1.1.5.0.
Am i missing anything?
Please help me fix this issue.
Thanks
Kathir
Edited by: Kathir(597386 ) on Sep 10, 2012 7:33 AM

Hi All
I got the steps to delete deployed webservice, we need to delete deployed services from policy studio.
Thanks
Regards
Kathir

Similar Messages

Unable to remove Azure VNet and Azure Backup from expired trial

Hi
We recently took an Azure trial, tested some bits and let the trial expire. We have now gone back and setup our PAYG subscription however i am unable to remove the vnet and backup service that are attached to the now expired trial subscription:
VNet: The subscription is in a disabled state.
Backup: You cannot delete vault <backup_name>
because it contains registered servers. Delete the servers and the restore points for the server data, and then delete the vault.
Any thoughts appreciated.
Thanks

Hi Mekh
I have checked the links and unfortunately they dont get me any further. I have removed all other services, sites and vms and there was never a gateway in place however i still cannot remove the vnet.
For the second link i am unable to drill down into the vnet as it is associated with a disabled subscription.
The backup service was provisioned under the trial account. I have attempted to create another vault under the active subscription and then attempt the removal again. This still does not work. I have removed
the vault in the PAYG sub.
I believe that the problem with the vault on the trail account is that it will be holding recovery points but i am unable to access the service to remove them under the disabled sub.
Thanks

Error: Unable to contact ZENworks WebService

Hey Guys,
Anyone seen this one, and if you have, have you found a resolution?
We're using ENGL ZToolkit for workstation imaging, and every so often (maybe a couple times a day) we'll see an error when the workstation attempts to register.
The error in the trace console on the workstation(s) is always the same:
[10-Mar-11 07:58:50] [Zsoaplib] [Debug] Error: Client found response content type of 'text/html;charset=utf-8', but expected 'text/xml'.
The request failed with the error message:
<html><head><title>Apache Tomcat/5.5.23 - Error report</title><style></style> </head><body><h1>HTTP Status 500 - </h1><HR size="1" noshade="noshade"><p><b>type</b> Status report</p><p><b>message</b> <u></u></p><p><b>description</b> <u>The server encountered an internal error () that prevented it from fulfilling this request.</u></p><HR size="1" noshade="noshade"><h3>Apache Tomcat/5.5.23</h3></body></html>
[10-Mar-11 07:59:00] [Zsoaplib] [Debug] Error: Client found response content type of 'text/html;charset=utf-8', but expected 'text/xml'.
The request failed with the error message:
<html><head><title>Apache Tomcat/5.5.23 - Error report</title><style></style> </head><body><h1>HTTP Status 500 - </h1><HR size="1" noshade="noshade"><p><b>type</b> Status report</p><p><b>message</b> <u></u></p><p><b>description</b> <u>The server encountered an internal error () that prevented it from fulfilling this request.</u></p><HR size="1" noshade="noshade"><h3>Apache Tomcat/5.5.23</h3></body></html>
[10-Mar-11 07:59:10] [Zsoaplib] [Debug] Error: Client found response content type of 'text/html;charset=utf-8', but expected 'text/xml'.
The request failed with the error message:
<html><head><title>Apache Tomcat/5.5.23 - Error report</title><style></style> </head><body><h1>HTTP Status 500 - </h1><HR size="1" noshade="noshade"><p><b>type</b> Status report</p><p><b>message</b> <u></u></p><p><b>description</b> <u>The server encountered an internal error () that prevented it from fulfilling this request.</u></p><HR size="1" noshade="noshade"><h3>Apache Tomcat/5.5.23</h3></body></html>
[10-Mar-11 07:59:20] [Zsoaplib] [Debug] Error: Client found response content type of 'text/html;charset=utf-8', but expected 'text/xml'.
The request failed with the error message:
<html><head><title>Apache Tomcat/5.5.23 - Error report</title><style></style> </head><body><h1>HTTP Status 500 - </h1><HR size="1" noshade="noshade"><p><b>type</b> Status report</p><p><b>message</b> <u></u></p><p><b>description</b> <u>The server encountered an internal error () that prevented it from fulfilling this request.</u></p><HR size="1" noshade="noshade"><h3>Apache Tomcat/5.5.23</h3></body></html>
[10-Mar-11 07:59:30] [Zsoaplib] [Debug] Error: Client found response content type of 'text/html;charset=utf-8', but expected 'text/xml'.
The request failed with the error message:
<html><head><title>Apache Tomcat/5.5.23 - Error report</title><style></style> </head><body><h1>HTTP Status 500 - </h1><HR size="1" noshade="noshade"><p><b>type</b> Status report</p><p><b>message</b> <u></u></p><p><b>description</b> <u>The server encountered an internal error () that prevented it from fulfilling this request.</u></p><HR size="1" noshade="noshade"><h3>Apache Tomcat/5.5.23</h3></body></html>
[10-Mar-11 07:59:41] [Zmainrun-Phase2] [Debug] returned 0 (exit code: 1)
[10-Mar-11 07:59:41] [Zmainrun-Phase2] Error: Unable to contact ZENworks WebService.
Typically if I reboot the workstation, it will register successfully.
Ideas?

zmd-messages.log from the workstation contains the following:
[DEBUG] [03/10/2011 07:58:53.873] [1324] [ZenworksWindowsService] [23] [] [ActionManager] [] [ No work to do found.] [] []
[DEBUG] [03/10/2011 08:01:18.534] [1324] [ZenworksWindowsService] [15] [] [SessionManager] [] [GetSession called with SessionID: 999] [] []
[DEBUG] [03/10/2011 08:01:18.534] [1324] [ZenworksWindowsService] [15] [] [SessionManager] [] [GetSession called with SessionID: 999] [] []
[DEBUG] [03/10/2011 08:01:18.534] [1324] [ZenworksWindowsService] [15] [] [SessionManager] [] [GetSession called with SessionID: 999] [] []
[DEBUG] [03/10/2011 08:01:18.534] [1324] [ZenworksWindowsService] [15] [] [ReportAnalyzeModule] [] [CollectionPointEnabled config value: False] [] []
[DEBUG] [03/10/2011 08:01:18.534] [1324] [ZenworksWindowsService] [15] [] [ReportAnalyzeModule] [] [CollectionPointEnabled config value: False] [] []
[DEBUG] [03/10/2011 08:01:18.534] [1324] [ZenworksWindowsService] [15] [] [ReportAnalyzeModule] [] [IsCollectionPoint returning: False] [] []
[DEBUG] [03/10/2011 08:01:18.892] [1324] [ZenworksWindowsService] [17] [] [SessionManager] [] [GetSession called with SessionID: 999] [] []
[DEBUG] [03/10/2011 08:01:18.892] [1324] [ZenworksWindowsService] [17] [] [SessionManager] [] [GetSession called with SessionID: 999] [] []
[DEBUG] [03/10/2011 08:01:18.924] [1324] [ZenworksWindowsService] [18] [] [ExtMsgProc] [] [ProcessMessages - wakeup] [] []
[DEBUG] [03/10/2011 07:58:15.476] [900] [LogonUI] [1] [] [RemotingUtility] [] [(900)RmtUtil.Activate. No client channel...] [] []
[DEBUG] [03/10/2011 07:58:15.000] [1324] [ZenworksWindowsService] [1452] [] [ZenNative] [] [Entering StartUserDaemon] [] []
[DEBUG] [03/10/2011 07:58:15.476] [900] [LogonUI] [1] [] [RemotingUtility] [] [(900)RmtUtil.Activate. New clientServerPath: IPC://e163cdf4-fdd2-433d-8f0d-3c38134fe3b1/] [] []
[DEBUG] [03/10/2011 07:58:15.000] [1324] [ZenworksWindowsService] [1452] [] [ZenNative] [] [Cannot start user daemon: ZenQueryUserToken() failed with error 1008] [] []
[DEBUG] [03/10/2011 07:58:15.492] [900] [LogonUI] [1] [] [RemotingUtility] [] [(900)RmtUtil.Activate. Registered server channel] [] []
[DEBUG] [03/10/2011 07:58:15.492] [900] [LogonUI] [1] [] [RemotingUtility] [] [(900)Client channel sink created.] [] []
[DEBUG] [03/10/2011 07:58:23.000] [1324] [ZenworksWindowsService] [2096] [] [ZenNative] [] [Entering StartUserDaemon] [] []
[DEBUG] [03/10/2011 07:58:23.000] [1324] [ZenworksWindowsService] [2096] [] [ZenNative] [] [Cannot start user daemon: ZenQueryUserToken() failed with error 1008] [] []
[DEBUG] [03/10/2011 07:58:23.000] [1324] [ZenworksWindowsService] [2096] [] [ZenNative] [] [Entering StartUserDaemon] [] []
[DEBUG] [03/10/2011 07:58:23.000] [1324] [ZenworksWindowsService] [2096] [] [ZenNative] [] [Cannot start user daemon: ZenQueryUserToken() failed with error 1008] [] []
[DEBUG] [03/10/2011 07:58:23.000] [1324] [ZenworksWindowsService] [2096] [] [ZenNative] [] [Entering StartUserDaemon] [] []
[DEBUG] [03/10/2011 07:58:23.000] [1324] [ZenworksWindowsService] [2096] [] [ZenNative] [] [Cannot start user daemon: ZenQueryUserToken() failed with error 1008] [] []
[DEBUG] [03/10/2011 07:58:23.000] [1324] [ZenworksWindowsService] [2096] [] [ZenNative] [] [Entering StartUserDaemon] [] []
[DEBUG] [03/10/2011 07:58:23.000] [1324] [ZenworksWindowsService] [2096] [] [ZenNative] [] [Cannot start user daemon: ZenQueryUserToken() failed with error 1008] [] []
[DEBUG] [03/10/2011 07:58:23.000] [1324] [ZenworksWindowsService] [2096] [] [ZenNative] [] [Entering StartUserDaemon] [] []
[DEBUG] [03/10/2011 07:58:23.000] [1324] [ZenworksWindowsService] [2096] [] [ZenNative] [] [Cannot start user daemon: ZenQueryUserToken() failed with error 1008] [] []
[DEBUG] [03/10/2011 07:58:24.000] [1324] [ZenworksWindowsService] [2096] [] [ZenNative] [] [Entering StartUserDaemon] [] []
[DEBUG] [03/10/2011 07:58:24.000] [1324] [ZenworksWindowsService] [2096] [] [ZenNative] [] [Cannot start user daemon: ZenQueryUserToken() failed with error 1008] [] []
[DEBUG] [03/10/2011 07:58:24.000] [1324] [ZenworksWindowsService] [2096] [] [ZenNative] [] [Entering StartUserDaemon] [] []
[DEBUG] [03/10/2011 07:58:24.000] [1324] [ZenworksWindowsService] [2096] [] [ZenNative] [] [Cannot start user daemon: ZenQueryUserToken() failed with error 1008] [] []
[DEBUG] [03/10/2011 07:58:27.910] [3560] [ZenNotifyIcon] [7] [] [RemotingUtility] [] [(3560)RmtUtil.Activate. No client channel...] [] []
[DEBUG] [03/10/2011 07:58:27.000] [1324] [ZenworksWindowsService] [1452] [] [ZenNative] [] [Entering StartUserDaemon] [] []
[DEBUG] [03/10/2011 07:58:27.910] [3560] [ZenNotifyIcon] [7] [] [RemotingUtility] [] [(3560)RmtUtil.Activate. New clientServerPath: IPC://9c95c4cd-ef41-4332-96fc-b2dd702d095c/] [] []
[DEBUG] [03/10/2011 07:58:27.910] [3560] [ZenNotifyIcon] [7] [] [RemotingUtility] [] [(3560)RmtUtil.Activate. Registered server channel] [] []
[DEBUG] [03/10/2011 07:58:27.910] [3560] [ZenNotifyIcon] [7] [] [RemotingUtility] [] [(3560)Client channel sink created.] [] []
[DEBUG] [03/10/2011 07:58:28.080] [2604] [ZenUserDaemon] [1] [] [ZenUserDaemon] [] [Starting new user daemon instance] [] []
[DEBUG] [03/10/2011 07:58:28.000] [1324] [ZenworksWindowsService] [1452] [] [ZenNative] [] [Successfully started user daemon (Process Id 2604)] [] []
[DEBUG] [03/10/2011 07:58:28.080] [2604] [ZenUserDaemon] [1] [] [ZenUserDaemon] [] [This is the first user daemon instance. Continuing initialization.] [] []
[DEBUG] [03/10/2011 07:58:28.090] [2604] [ZenUserDaemon] [1] [] [ZenUserDaemon] [] [UserDaemon worker thread is starting up] [] []
[DEBUG] [03/10/2011 07:58:28.090] [2604] [ZenUserDaemon] [1] [] [RemotingUtility] [] [(2604)RmtUtil.Activate. No client channel...] [] []
[DEBUG] [03/10/2011 07:58:28.090] [2604] [ZenUserDaemon] [1] [] [RemotingUtility] [] [(2604)RmtUtil.Activate. New clientServerPath: IPC://d9bdb376-e4c1-4947-93a4-56b6024cd923/] [] []
[DEBUG] [03/10/2011 07:58:28.100] [2604] [ZenUserDaemon] [1] [] [RemotingUtility] [] [(2604)RmtUtil.Activate. Registered server channel] [] []
[DEBUG] [03/10/2011 07:58:28.100] [2604] [ZenUserDaemon] [1] [] [RemotingUtility] [] [(2604)Client channel sink created.] [] []
[DEBUG] [03/10/2011 07:58:28.140] [2604] [ZenUserDaemon] [1] [] [InitZMD] [] [Checking if user daemon is running took 50.0001 ms] [] []
[DEBUG] [03/10/2011 07:58:28.150] [2604] [ZenUserDaemon] [1] [] [ZMD] [] [SetupUserDaemonServer returning True after 0.004 seconds] [] []
[DEBUG] [03/10/2011 07:58:28.150] [2604] [ZenUserDaemon] [1] [] [InitZMD] [] [Loading modules for user daemon took 10 ms] [] []
[DEBUG] [03/10/2011 07:58:28.150] [2604] [ZenUserDaemon] [1] [] [ZenUserDaemon] [] [UserDaemon worker thread is initialized] [] []
[DEBUG] [03/10/2011 07:58:28.150] [2604] [ZenUserDaemon] [1] [] [ZenUserDaemon] [] [Starting message loop] [] []
[DEBUG] [03/10/2011 07:58:28.630] [2604] [ZenUserDaemon] [5] [] [SessionManager] [] [EnsureSession called with primary SessionID: 999] [] []
[DEBUG] [03/10/2011 07:58:28.630] [2604] [ZenUserDaemon] [5] [] [SessionManager] [] [AltSessionID was not set specified] [] []
[DEBUG] [03/10/2011 07:58:28.630] [2604] [ZenUserDaemon] [5] [] [SessionManager] [] [EnsureSession is creating a new session with primary SessionID: 999] [] []
[DEBUG] [03/10/2011 07:58:28.630] [2604] [ZenUserDaemon] [5] [] [SessionManager] []

Unable to remove a video

I am unable to remove a video from my iPhone when I sync it using iTunes. The video is unchecked in iTunes and I have even gone so far as to delete it from my iTunes library.

Have you tried to turn your phone completly off and back on since syncing with the video unchecked? (http://support.apple.com/kb/ht1430)

I have a new Mac Mini and I found AdWare called TakeOverSearchAssetsMac and SearchProjects on it. I have been unable to remove it. Does anyone have any ideas on how to remedy this?

I have a new Mac Mini and I found AdWare called TakeOverSearchAssetsMac and SearchProjects on it. I have been unable to remove it. Does anyone have any ideas on how to remedy this?

Please review the options below to determine which method is best to remove the Adware installed on your computer.
The Easy, safe, effective method:
http://www.adwaremedic.com/index.php
If you are comfortable doing manual file removals use the somewhat more difficult method:
http://support.apple.com/en-us/HT203987
Also read the articles below to be more prepared for the next time there is an issue on your computer.
https://discussions.apple.com/docs/DOC-7471
https://discussions.apple.com/docs/DOC-8071

Hi, I am getting a warning message on screen, saying that my iPad hasn't been backed up for 2 weeks, and saying under what circumstances the message appears. My problem is, is that I have backed up iCloud, but am unable to remove the warning.

Hi,
I am getting a warning message on screen, saying that myiPad hasn't been backed up to iCloud for two weeks, and advising under what circumstances the message appears. My problem is, is that I have backed it up, but am unable to remove the message, and whilst the message is there, the iPad is frozen, and I cannot do anything.
Has any other user had such a problem, and if so, how did they rectify it.
Any advice would be greatly appreciated.
Thanks in advance.
clarinet99

Try this.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up

Unable to remove this item from GRIR. It was a consignment PO receipt done

Hi Guys,
The user saying that"unable to remove this item from GRIR. It was a consignment PO receipt done improperly, so it needs to be deleted".
Because of this the the material documet which shows $6725.43-(Negative) in GRIR account.when i check this this transation was originated through MI10(Physical inventory differenvces posting).May be user done wrongly.
Now the problem is this
-          how this transaction originated?
-          Why is this posted to GR/IR account?
-          How do we correct the open item in the GR/IR account?
-          What need to happen to rectify the mistake?
can any tell me how can we do this,i will be greatful to u.
Thanks&Regards,
Babu,
09930154536

Hi Jurgen,
when i check the material document and accounting document,it was showing that said amount in negative sign and transaction done by MI10 means posted differences with out reference to document.
it means the user may entered wrongly i think.
was there any GRIR account for MI10?
MI10 does not have reversal or cancel?
so how to resolve it?
as per my idea it can be done by FI posting.
please help to resolve.
Thanks in advance.
Regards,
Babu
09930154536

Unable to remove a host from VMM - Error (2606) Unable to perform the job because one or more of the selected objects are locked by another job.

I am unable to remove a host from my Virtual Machine Manager 2012 R2. I receive the following error:
Error (2606)
Unable to perform the job because one or more of the selected objects are locked by another job.
Recommended Action
To find out which job is locking the object, in the Jobs view, group by Status, and find the running or canceling job for the object. When the job is complete, try again.
I have already tried running the following command in SQL Server Management Studio
SELECT * FROM [VirtualManagerDB].[dbo].[tbl_VMM_Lock] where TaskID='Task_GUID'
I received this error back:
Msg 8169, Level 16, State 2, Line 1
Conversion failed when converting from a character string to uniqueidentifier.
I have also tried rebooting both the host and the Virtual Machine Manager Server. After rebooting them both, I still receive the same error when trying to remove the host.
Here are my server details
VMM Server OS = Windows 2012 Standard
VMM Version = 2012 R2 3.2.7510.0
Host OS = Windows 2012 R2 Datacenter
Host Agent Version = 3.2.75.10.0
SQL Server OS = Windows 2012 Datacenter
SQL Version = 2012 SP 1 (11.0.3000.0)

Hi there,
How many hosts are you managing with your VMM server?
The locking job might be the background host refresher job. Did you see any jobs in the jobs view, when the host removal job failed?
If there is no active jobs in the jobs view when this host removal job fails, can you please turn on the VMM tracing, retry the host removal, and paste back the traces for the failed job (search for exception and paste the whole stack)?
Thanks!
Cheng

When trying to install itunes on my PC, I get the message (unable to remove the older version of Bonjour as well as the message unable to remove the older version of Apple software update). Please advise how to proceed.

Please help with this problem. When trying to install itunes on my HP520 PC, I get the error message (unable to remove the older version of Bonjour as well as the message unable to remove the older version of Apple software update).

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get aCode 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any Apple Software Updateentries and click "Remove", as per the following screenshot:
Next, select any Bonjour entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install using an iTunesSetup.exe (or iTunes64Setup.exe) downloaded from the Apple Website:
http://www.apple.com/itunes/download/
Does it go through properly this time?

HT1923 Want to uninstall iTunes and reinstall. Unable to remove Bonjour and Apple folders. Error message that they are in use. iPodService.exe is not running.

Want to uninstall and reinstall iTunes. Ran uninstall for itunes and QuickTime. Unable yo remove Bonjour and Aple program. Error message that they are in use or the folder is open, ipodservice.exe is not running.

" The feature you are trying to use is on a network resource that is unavailable. I tried to uninstall iTunes, and it would not uninstall. It gave me the following message " The path C:\documents and settings\network service\local settings\application data\apple\apple software update\iTunes.msi cannot be found.
Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Unable to remove/change sales tax in sales order

Hi Sappers!!
I are unable to remove sales tax from a sales order. I have tried to update the sales order by clicking on Header>Conditions Tab>Update-->Double click on G to redetermine the taxes.
The sales order was entered the same day the Vertex record was input.
Appreciate your pointers and time!!

Hi,
If you want to remove the sales tax from sales order,
first of all goto FTXP, give the country, for which you want to change the tax code percentage, and give the tax code and press enter, there it will show existing the tax percentage for that condition type (say earlier it was 10%). Now you want to make it 0% then remove 10 and put it as 0 and save it.
Next goto condition record VK12 maintaine new tax percentage which you want to change. Like earlier 10% was there but you want to make it as 0%, then maintaine in VK12 tax condition record.
Now goto your sale order in change mode VA02, and update the procedure using G, then the new tax willbe reflected i.e., 0% will come.
Hope this is clear
Reward if helpful
Thanks
Praveen

Unable to remove Workforce Planning formulae in Planning 9.3.1.1.16

Hi All,
We are on using Planning 9.3.1.1.16 and are unable to remove member formulae from Planning.
Our Planning application is EPMA (9.3.1.3) enabled. When refreshing the Planning application we receive the following error:
Error [1200497] detected in member formula for member "Regular Headcount".
Error [1200497] detected in member formula for member "Departed Headcount".
Error [1200497] detected in member formula for member "LOA Headcount".
Error [1200497] detected in member formula for member "Maternity Headcount".
Error [1200497] detected in member formula for member "On Sabbatical Headcount".
Error [1200497] detected in member formula for member "Contractor Headcount".
Error [1200497] detected in member formula for member "Temporary Headcount".
Error [1200497] detected in member formula for member "Other Headcount".
Error [1200497] detected in member formula for member "Turnover Headcount Adjustment".
Error [1200497] detected in member formula for member "Regular FTE".
Error [1200497] detected in member formula for member "Contractor FTE".
Error [1200497] detected in member formula for member "Temporary FTE".
Error [1200497] detected in member formula for member "Other FTE".
Error [1200497] detected in member formula for member "Turnover Adjustment".
STEPS TO REPRODUCE :
-In EPMA Master Library, remove the formulae for the above members and save the changes every time
- In Planning remove the member formulae for the above members (EDIT_DIM_ENABLED set to TRUE). This step may not be required however I tested it and was able to reproduce the issue
- Deploy the EPMA applicatoin. Deployment is successful
- Refresh Planning app. Refresh is successful
- Now change any property for any of the above members in EPMA. For example add an alias of Turnover Adj to the "Turnover Adjustment" member and save.
- Deploy the EPMA app => Successful
- Refresh Planning app=> Fails with same above error
Observation: The member formulae are back in Planning not EPMA. It looks like edit workforce members somehow causes the formulae to reappear in Planning.
Has anyone come across this issue?
Thanks for your help.
Seb

Just in case anyone has a similar issue...
Thsi was reported as bug #7411035 (ie: Character Limit for Member Formulas ). Details from Oracle Dev below:
The character limit was 2000 causing longer member formulas to fail during an application deployment. An underlying bug was found during investigation of the member formula limit and we think this is the cause of your particular issue. The problem was with empty member formula string. During the deployment process there are EAS side checks. EAS will only accept a member formula if it contains at least one character(length > 0), else the formula
field is rejected in the deployment XML file.
The script below copy the member formula to a different table and then delete the original. So it is quite a destructive query to run.
Prior to executing the query, a full EPMA/Planning applications backup should be performed (including essbase side) and the EPMA Dimension Server services (particularly the Process Manager) should be stopped.
######### SQL SCRIPT #########
insert into DS_Property_Member_Memo
select i_library_id, i_dimension_id, i_application_id, i_member_id, i_property_id, c_property_value as x_property_value
from ds_property_member pm
where pm.i_property_id = (select i_property_id from ds_property
where c_property_name = 'MemberFormula')
and not exists (select * from ds_property_member_memo pmm
where pmm.i_library_id = pm.i_library_id and pmm.i_dimension_id = pm.i_dimension_id
and pmm.i_application_id = pm.i_application_id and pmm.i_member_id = pm.i_member_id
and pmm.i_property_id = pm.i_property_id)
delete from ds_property_member
where i_property_id = (select i_property_id from ds_property where c_property_name = 'MemberFormula')
######### END OF SCRIPT #########
Seb

Unable to Create PLSQL Webservice in JDeveloper 11g

Hi,
i have created webservice for PL/SQL for functions with out TYPE data types as parameter..
but i am unable to create a webservice for procedure having
Freight_Pkg.PROCEDURE get_freight(
p_sbl_source_line_tab IN OUT SYK_SBL_SOURCE_LINE_TAB_TYPE
,l_total_freight OUT NUMBER
,l_err_code OUT NUMBER
,l_err_mesg OUT VARCHAR2
and when i try to create web service it generates below Warning
=========================================
Log Message of WebService
========================================
Generating PL/SQL Web Service
Generating WSDL and mapping file
WARNING: OWS-00077 The Value Type class: SykSblSourceLineBase does not have a valid Java Bean pattern.
Adding service files to deployment profile
Service generation finished
Generation complete.
Please let me know the procedure for creating Webservice for PLSQL of Table Type Parameters passing as IN parameter in Procedure.
Thanks,
Vijay

Vijay,
Is this configured with Oracle E-Business Suite? If yes, please note that JDeveloper 11g is not certified with Oracle Apps 11i/R12.
How to find the correct version of JDeveloper to use with eBusiness Suite 11i or Release 12.x [ID 416708.1]
Configuring JDeveloper For Use With Oracle Applications 11i and R12 [ID 330236.1]
If this is not related to EBS, post your question in the appropriate forum for a better/faster response.
JDeveloper and ADF
JDeveloper and ADF
Thanks,
Hussein

Despite my best efforts, I am unable to remove iTunes 11.1.4 from my PC, this being made necessary because the original installation had a flaw and did not load properly. Effor to use the control panel, deleting dll. files, etc. all failed. iTune out??

Despite my best efforts, I am unable to remove iTunes 11.1.4 from my PC, this being made necessary because the original installation had a flaw and did not load properly. Effor to use the control panel, deleting dll. files, etc. all failed. And, of course, on startup, a window opens with the error and tells me find QTMovie.dll and delete it because this may be the source of the hangup. Also, in trying to delete iTunes, I get the additional message that I must get approval from the System Administrator to take this action. I am the System Administrator.
Any ideas would be welcomed.
Thank you.
James
<E-mail Edited by Host>

Thank you for asking this question. I'm having the same issues.
Liz

Error message :mail unable to remove deleted messages in the mailbox

Hi,
I am frequently getting this error message: Mail was unable to remove the deleted messages in the mailbox (my email address) on server "mail.mac.com".
The server error encountered was: Error MFMessageErrorDomain 1028
Sometimes the error message says that time has logged out. The thing is, most of the time, even though I get the error message, the deleted messages are being removed. Once or twice, I had to delete a couple of messages a few times. I've been getting the error message several times a day for the last couple of days.
If anyone can enlighten me about why this happens, I would appreciate it.
Thanks

Well guys, all of you who are having this problem, it appears as if no one in the know is interested in giving any insight into why this happens. As of now, I haven't gotten the error message for a couple of days, so maybe it's something which resolved itself, something with the server. I would still like to know why this happens, and I wish those of you who still are having the problem could get some answers. It it's possible, go to an Apple Retail store, and see if you can talk to a genius about this issue.

Unable to Remove Registered Webservice in OEG 11.1.1.6.1

Similar Messages

Maybe you are looking for