Unable to reorganize BIA with return code 5528 error

Hi,
Reorganize job is not scheduling due to 5528 return code error. It is saying that already one reorg job is active. But i do not see any running job. Also from log executions it is recorded as "Failed".
Is the job running at TREX server ?
Please suggest.
-Vidyasagar

Hi,
Error code 5528 means the nameserver has active plan. Normally not problem but if you have already seen the wrong status in reorg in standalone trexadmin tool then this means some query is hanging.
The reorg job can not be canceled now. You should restart the index server on all the blades. Although running reorg don't need to care the query in general, but if you have big query then please find a time when there is no query running to do the reorg job.
Best Regards,
Joseph

Similar Messages

Function DB6_PLAN_STOP_BATCH_JOB failed with return code = Job error

Hi team,
I have issue with "SAP_COLLECTOR_FOR_PERFMONITOR" Job .it has been Finished but in Job Log I get error as below:
Job started
Step 001 started (program RSCOLL00, variant , user ID DDIC)
Clean_Plan:Cleanup of DB13 Plannings
Clean_Plan:started by RSDBPREV on server sapqas01
Clean_Plan:Cleaning up jobs of system QAS
Function DB6_PLAN_STOP_BATCH_JOB failed with return code = Job error
Clean_Plan:terminated with error
REASON=Job error
Database system not supported
Reorganization of the database started
Reorganization of the database ended
Job finished
I have alredy reschedule this Job in 000 with DDIC User.
Please help me ,
Thanks
Vijay

Hello Vijay,
The "Database system not supported" error you see, suggests that your TCOLL table is not setup correctly. You probably have a report scheduled in your TCOLL which is for a different DB then the one you run.
If the collector canels all the time, then this is probably a report which is scheduled to run every hour in your TCOLL. If it only cancels sometimes, then it should be easier to identify which report is causing it in your TCOLL.
The bottom line is to ensure your TCOLL is setup correctly and that you are not running DB reports there that are for a different DB than the one you use. The SAP note you follow to setup your TCOLL table depends on your SAP system version:
12103 - Contents of the TCOLL table
970449 - Contents of TCOLL table in SAP_BASIS 640
966309 - Contents of table TCOLL in SAP_BASIS 700
966631 - Contents of TCOLL table in SAP_BASIS 710
Regards,
Brendan

DB13 error -- Function DB6_PLAN_DELETE_BATCH failed with return code = Job

hello All,
when I try to delete or edit any DBA Job in transaction DB13 the following error is displayed:
An error occurred when processing system
Function DB6_PLAN_DELETE_BATCH failed with return code = Job error
How can I fix this error and delete or change my DBA jobs?
My syste is SAP ECC 6.0 SR3 - Solaris 10 - Oracle 10.2.0.4.0
Thanks
Hernando

Hello Hernando,
Let's see what this SAP Note says,
Note 1093883 - ORACLE: Function module DB6_PLAN_ADD_BATCH fails
Edit: However, 'valid release' makes confusion
Regards
Subbarao
Edited by: subbarao chinta on Oct 8, 2009 9:00 PM

R3trans check finished with return code:12

Hello!
Can some one help me with the error:
R3trans check finished with return code:12
ERROR: Startup of database failed
/usr/sap/<SID>/SYS/exe/runn/startdb terminating with error 12.
I can start as ora<sid> the oracle, but have problem to start sap.
Thank you very much!
regards
Thom

Dear Thom,
Check ENV variables.Maybe there could be some prob with that .
Please paste the trans.log output of the R3trans -x.
That could help us in suggesting some thing .
Regards
Bharathwaj V

DB13 return code = job error

Dear All,
WE are getting followin error while scheduling job in db13 tcode.
Function DB6_PLAN_ADD_BATCH failed with return code = Job error
ECC 6.0
Oracle 10g

You indicated that your database is Oracle 10G. This forum is for SAP on DB2 LUW as the database server. Please post your question on the appropriate forum.
Regards,
Adam Wilson
SAP Development Support
IBM Toronto Lab.

Transport error failure with return code 12 for BIA indexed Cube

Hello,
I was trying to transport few cubes from the Dev to the QA system. However, the transport failed repeatedly with return code 12. I noticed that the version of Cubes in the target system had BIA indexes loaded on it. So, I deleted those indexes and re-transported the cubes.To my surprise, the transport went fine without the BIA indexes. This now opens up a new avenue for discussion of dropping and recreating BIA indexes for those cubes that needs to be transported.
Any thoughts on this new aspect before. Has anyone faced similar problems. I want to know your experiences before we can take this issue to SAP.
Thanks,
Rishi

Rishi/Vitaly/Marc,
How do you transport cubes with BIA indexes.
Do you drop/recreate the BIA index before the transport.
In my case, the transport kicked off adjustment job exactly as described in [Note 1012008|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1012008]
Indexes looks fine once this jobs completes successfully. The transport does not fail.
Is this approach fine.
I see that most of the customers drop/recreate indexes before transporting cubes.
Can I run into data consistency issues with this approach?
Input required.
Thanks,
Saurabh

Backng up failed with return code 255 ...Help!!!

Hi,
I am in a process of backing up Oracle application server 10g through "Configure Backup/Recovery Settings" feature of the app server, when I provide the directories for:
1. Log File Location
2. Configuration Files Backup Location
3. Metadata Repository Database Backup Location
4. Metadata Repository Database SID
and click on OK it provides me the following error:
"The command <ORACLE_HOME>/perl/5.6.1/bin/MSWin32-x86/perl.exe <ORACLE_HOME>\backup_restore/bkp_restore.pl -m configure -h <ORACLE_HOME> -f > <ORACLE_HOME>\backup_restore\logs/2008-12-06_13-36-02_output.log failed with return code 255"
And the log file says -"Unable to get dbid from the database."
Please Help..!!!
Thanks

This turns out to be a non-issue. I re-installed JDK 1.6,
thinking this might have been the problem, but as it turns out,
this Windows machine was a VM, and there haven't been any issues
with other VM's, only this one, leading me to conclude the problem
was the VM. We've since migrated off this machine and recycled
it.

Error in transport, ended with return code: 12, job RDDEXECL cancelled

Hi Friends,
When I am trying to import a request in a BW preproduction system, it is giving below error: However, the transport is imoprted successfully in Quality.
===================================
Program terminated (job: RDDEXECL, no.: 09222300)
See job log
Execution of programs after import (XPRA)
End date and time : 20080509092238
Ended with return code: ===> 12 <===
Job log:
Date Time Message
09.05.2008 09:22:23 Job started
09.05.2008 09:22:23 Step 001 started (program RDDEXECL, variant , user ID DDIC)
09.05.2008 09:22:23 All DB buffers of application server unix0001 were synchronized
09.05.2008 09:22:25 ABAP/4 processor: UNCAUGHT_EXCEPTION
09.05.2008 09:22:25 Job cancelled
=======================================
Kindly advice.
Thanks & regards,
Kunal Patel.

Hello,
I ran a search for this error and found the following notes:
SAP Note 966234 - 70SP10: DTP transport and content error
SAP Note - 1074388 SAPBINews NetWeaver 7.0 BI Support Package 16
Check if they are relevant for your system.
Regards,
Siddhesh

[Error during Export] R3load exited with return code 11

Hi guys,
While performing and Unicode Migration, during Export Phase, Migration Monitor returned the following error while exporting a package
ERROR: 2014-06-01 10:57:44 com.sap.inst.migmon.LoadTask run
Unloading of 'REGUC' export package is interrupted with R3load error.
Process '/usr/sap/ECP/DVEBMGS00/exe/R3load -e REGUC.cmd -datacodepage 4102 -l REGUC.log -stop_on_error' exited with return code 11.
For mode details see 'REGUC.log' file.
Standard error output:
sapparam: sapargv(argc, argv) has not been called!
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
REGUC.log details:
(As you see, it does not provide reasons of this error, all messages are informative and alike all other Packages logs)
/usr/sap/ECP/DVEBMGS00/exe/R3load: START OF LOG: 20140601105052
/usr/sap/ECP/DVEBMGS00/exe/R3load: sccsid @(#) $Id: //bas/740_REL/src/R3ld/R3load/R3ldmain.c#4 $ SAP
/usr/sap/ECP/DVEBMGS00/exe/R3load: version R7.40/V1.8
Compiled Jul 23 2013 21:30:53
/usr/sap/ECP/DVEBMGS00/exe/R3load -e REGUC.cmd -datacodepage 4102 -l REGUC.log -stop_on_error
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): US7ASCII
(EXP) INFO: check NameTab widths: Ok.
(DB) INFO: Export without hintfile
(RSCP) INFO: UMGCOMCHAR read check, OK.
(RSCP) INFO: environment variable "I18N_POOL_WIDTH" is not set. Checks are active.
(RSCP) INFO: I18N_NAMETAB_TIMESTAMPS not in env: checks are ON (Note 738858)
(RSCP) INFO: UMGSETTINGS nametab creation: ok.
(RSCP) INFO: Global fallback code page = 1160
(RSCP) INFO: Common character set is not 7-bit-ASCII
(RSCP) INFO: Collision resolution method is 'fine'
(RSCP) INFO: R3trans code pages = Normal
(RSCP) INFO: EXPORT TO ... code pages = Normal
(RSCP) INFO: Check for invalid language keys: activated
(RSCP) INFO: I18N_NAMETAB_NORM_ALLOW = 999999999
(RSCP) INFO: I18N_NAMETAB_NORM_LOG   = 1000000002
(RSCP) INFO: I18N_NAMETAB_ALT_ALLOW = 10000
(RSCP) INFO: I18N_NAMETAB_ALT_LOG    = 10003
(RSCP) INFO: I18N_NAMETAB_OLD_ALLOW = 0
(RSCP) INFO: I18N_NAMETAB_OLD_LOG    = 500
(RSCP) INFO: init SUMG interface (3#$Revision: #1 $); package name: "REGUC".
(RSCP) INFO: "REGUC001.xml" created.
(GSI) INFO: dbname   = "ECP20030615080638
(GSI) INFO: vname    = "ORACLE "
(GSI) INFO: hostname = "ecp "
(GSI) INFO: sysname = "SunOS"
(GSI) INFO: nodename = "ecp"
(GSI) INFO: release = "5.10"
(GSI) INFO: version = "Generic_142900-13"
(GSI) INFO: machine = "sun4u"
Tried to find what does R3load Return Code 11 means, but I couldnt find further information on this.
Any hint of what is causing this error?
(Please disregard any Filesystem issues since all of them have available space)
Best!

After using latest R3load patch, it provides furher information on the log file.
-------------------- Start of patch information ------------------------
patchinfo (patches.h): (0.070) R3ldctl: fix CDS views creation in upgrade export mode (note 2
017805)
DBSL patchinfo (patches.h): (0.022) Smaller corrections in release 7.40 (th, dp, vmc, dpmon)
(note 1821404)
--------------------- End of patch information -------------------------
process id 27326
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): US7ASCII
(EXP) INFO: check NameTab widths: Ok.
(DB) INFO: Export without hintfile
(RSCP) INFO: UMGCOMCHAR read check, OK.
(RSCP) INFO: environment variable "I18N_POOL_WIDTH" is not set. Checks are active.
(RSCP) INFO: I18N_NAMETAB_TIMESTAMPS not in env: checks are ON (Note 738858)
(RSCP) INFO: UMGSETTINGS nametab creation: ok.
(RSCP) INFO: Global fallback code page = 1160
(RSCP) INFO: Common character set is not 7-bit-ASCII
(RSCP) INFO: Collision resolution method is 'fine'
(RSCP) INFO: R3trans code pages = Normal
(RSCP) INFO: EXPORT TO ... code pages = Normal
(RSCP) INFO: Check for invalid language keys: activated
(RSCP) INFO: I18N_NAMETAB_NORM_ALLOW = 999999999
(RSCP) INFO: I18N_NAMETAB_NORM_LOG   = 1000000002
(RSCP) INFO: I18N_NAMETAB_ALT_ALLOW = 10000
(RSCP) INFO: I18N_NAMETAB_ALT_LOG    = 10003
(RSCP) INFO: I18N_NAMETAB_OLD_ALLOW = 0
(RSCP) INFO: I18N_NAMETAB_OLD_LOG    = 500
(RSCP) INFO: init SUMG interface (3#$Revision: #1 $); package name: "REGUC".
(RSCP) INFO: "REGUC003.xml" created.
(GSI) INFO: dbname   = "ECP20030615080638
(GSI) INFO: vname    = "ORACLE                          "
(GSI) INFO: hostname = "ecp                                                             "
(GSI) INFO: sysname = "SunOS"
(GSI) INFO: nodename = "ecp"
(GSI) INFO: release = "5.10"
(GSI) INFO: version = "Generic_142900-13"
(GSI) INFO: machine = "sun4u"
(GSI) INFO: instno   = "6120023288"
(RTF) ########## WARNING ###########
        Without ORDER BY PRIMARY KEY the exported data may be unusable for some databases
(RDI) WARNING: /respaldo/ECP_Export/ABAP/DATA/REGUC.STR: cannot find version token "ver:" at line 1
(RDI) WARNING: /respaldo/ECP_Export/ABAP/DATA/REGUC.STR: unknown file format, assuming version 2
(EXP) INFO: table REGUC will be exported with sorting (task modifier)
------------------ C-STACK ----------------------
[0] t_splay ( 0x1020df850, 0xb3, 0x4386, 0x100a02078, 0x0, 0x1020df870 ), at 0xffffffff7b9629
94
[1] t_delete ( 0x1020df850, 0x4348, 0x1d9870, 0x1000d0408, 0xffffffff7bb3c000, 0x0 ), at 0xff
ffffff7b9627e4
[2] realfree ( 0x101ee7590, 0x1f82b1, 0x1d9cd0, 0x1f82b0, 0xffffffff7bb3c000, 0x101ee7590 ),
at 0xffffffff7b9623b0
[3] _malloc_unlocked ( 0x7d40, 0x200000, 0x101edf840, 0x0, 0x101ee7580, 0x0 ), at 0xffffffff7
b961eb4
[4] malloc ( 0x7d39, 0x2388, 0x1da428, 0x10038fe84, 0xffffffff7bb3c000, 0x2000 ), at 0xffffff
ff7b961c28
[5] rstg_get ( 0x2, 0x0, 0x2, 0x7d10, 0x0, 0x10077d8c0 ), at 0x10038ff4c
[6] c3_uc_new_cache ( 0x100a02078, 0x284db0, 0x284c00, 0x10077d8c0, 0x100a02108, 0xb3 ), at 0
x1000d1ce8
[7] c3_uc_seek_cache ( 0xb3, 0xff79, 0xffffffff7ffcae3e, 0x100a02078, 0x10189fa48, 0x10077d8c
0 ), at 0x1000d188c
[8] c3_uc_new_tabcache ( 0x0, 0xb3, 0x4386, 0x100a02078, 0xb3, 0x10077d8c0 ), at 0x1000d13fc
[9] c3_uc_insert_record_in_cache ( 0xffffffff7ffcb04e, 0x10189fa48, 0x100a02078, 0x100a024c8,
0xb3, 0x1058c8f84 ), at 0x1000d0408
[10] c3_uc_insert ( 0x0, 0x100a02078, 0x0, 0x0, 0x10077d8c0, 0xffffffff7ffcb04e ), at 0x1000c
f944
[11] c3_uc_convert_table_entry ( 0x1015c61f8, 0x0, 0x100a02078, 0x0, 0x10189f408, 0x31a000 ),
at 0x1000ce314
[12] c3_uc_convert_logic_table ( 0x1015c61f8, 0x100a02078, 0x0, 0x4a, 0x100638dc0, 0x10077d8c
0 ), at 0x1000cdb18
[13] c3_uc_convert_cluster_data ( 0x100a02078, 0xffffffff7ffcbc50, 0x1015c6428, 0x1015c61f8,
0x10077d8c0, 0x0 ), at 0x1000cd10c
[14] c3_uc_convert_cluster_item ( 0xffffffff7ffcbc78, 0xffffffff7ffcbc50, 0x100954770, 0x1038
6f6e0, 0xffffffff7ffcbb8c, 0x100a02812 ), at 0x1000be1d4
[15] process_task ( 0xffffffff7ffcbc78, 0xffffffff7ffcbc50, 0x100954770, 0x100a02810, 0x10063
32e0, 0x10077d8c0 ), at 0x1000b2f58
[16] CnvCluster ( 0x1014642d0, 0x100954670, 0x100aa9610, 0x2849b8, 0x284800, 0x6cb978 ), at 0
x1000b1f8c
[17] cnv_clust2 ( 0x100aa9580, 0xffffffff7ffcc258, 0x100954770, 0xfc0, 0x107d00, 0x100954670
), at 0x100062714
[18] cnv_cp ( 0x100aa9580, 0xffffffff7ffcc258, 0x100aa95e0, 0x0, 0x10077d8c0, 0x1d6c00 ), at
0x100064644
[19] process_buffer ( 0x100aa9580, 0xffffffff7ffcc258, 0xfff00, 0x100a97bd0, 0x10, 0x100aa95b
0 ), at 0x10007162c
[20] execute_table_unload ( 0xffffffff7ffed610, 0xffffffff7ffdc4b0, 0x0, 0x100aa9580, 0xfffff
fff7ffcc258, 0x10077d8c0 ), at 0x10006c488
[21] export_table_task ( 0xffffffff7ffed610, 0x0, 0xffffffff7ffdc368, 0xffffffff7ffcc330, 0xf
fffffff7ffeedb8, 0xffffffff7ffeec60 ), at 0x10006c934
[22] db_unload ( 0x100a97b0d, 0xffffffff7ffed610, 0x0, 0x10077d8c0, 0xffffffff7ffeec60, 0xfff
fffff7bb47540 ), at 0x10006d148
[23] main_r3ldmain ( 0x72ec00, 0xffffffff7ffff448, 0xffffffff7ffff228, 0xffffffff7bb47540, 0x
1005fc290, 0x0 ), at 0x1000514e0

Test call of transport control program (tp) ended with return code 0200 Message no. TK094

Hello Expert,
My SAP System environment as follow
SAP Product : SAP NetWeaver 04
Operating System : Windows 2003 32 bit
SAP Database : MS SQL 2005 32 bit
I have installed SAP NetWeaver 04 system with system copy option. I have installed Application server & Database server on different physical server. App server : SSC2PAS3SFWBW and Database Server : SSC2PAS3SFSQW1.
After SAP NetWeaver 04 installation with system copy I have done TMS configuration with virtual system for a test, It is working fine but while releasing request form SFD system (Development system) it get error “Test call of transport control program (tp) ended with return code 0200. Message no. TK094”
I have reconfigured the TMS and check but it can’t help. TR gets release and import with OS level but at SAP level it gets error.
Trans --> Log
1 ETP199 ######################################
1 ETP199X######################################
1 ETP182 CHECK WRITEABILITY OF BUFFERS
1 ETP101 transport order     : "SFDK905838"
1 ETP102 system              : "SFD"
1 ETP108 tp path             : "tp"
1 ETP109 version and release : "340.16.72" "640"
1 ETP198
2EETP128 No target system defined. "SFDK905838" is not a transport request.
1 ETP182 CHECK WRITEABILITY OF BUFFERS
1 ETP110 end date and time   : "20140602150208"
1 ETP111 exit code           : "12"
1 ETP199 ######################################
Steps for Reconstruction
# Upgraded latest SAP Kernel Non-Unicode 640_Rel Patch level 404
# Reconfigured the TMS
# Full User Permission has been set to all SAP Directory.
Rgds,
Ashok

Hi Ashish,
I have removed virtual system form TMS and configured with Development & Production system, but the same error. Not able to release TR.
SLOG as below.
ERROR SFDK905832           SFD f 0012 20140602090930 default_user A559420      SSC2PAS3SFWBW
ERROR SFDK905832           SFD f 0012 20140602093923 default_user A559420      SSC2PAS3SFWBW
ERROR SFDK905832           SFD f 0012 20140602094059 default_user A559420      SSC2PAS3SFWBW
ERROR SFDK905832           SFD f 0012 20140602102854 default_user A559420      SSC2PAS3SFWBW
ERROR SFDK905832           SFD f 0012 20140602103633 default_user A559420      SSC2PAS3SFWBW
ERROR SFDK905832           SFD f 0012 20140602104142 default_user A559420      SSC2PAS3SFWBW
ERROR SFDK905832           SFD f 0012 20140602111140 default_user A559420      SSC2PAS3SFWBW
ERROR SFDK905832           SFD f 0012 20140602112723 default_user A559420      SSC2PAS3SFWBW
ERROR SFDK905832           SFD f 0012 20140602113109 default_user A559420      SSC2PAS3SFWBW
ERROR SFDK905832           SFD f 0012 20140602113704 default_user A559420      SSC2PAS3SFWBW
ERROR SFDK905832           SFD f 0012 20140602113722 default_user A559420      SSC2PAS3SFWBW
ERROR SFDK905832           SFD f 0012 20140602113753 default_user A559420      SSC2PAS3SFWBW
ERROR SFDK905832           SFD f 0012 20140602113809 default_user A559420      SSC2PAS3SFWBW
ERROR SFDK905834           SFD f 0012 20140602125959 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905834           SFD f 0012 20140602130035 default_user BASIS@ORIGIN SSC2PAS3SFWBW
START EXPORT PREPARATION   SFD e      20140602132917              sfdadm       SSC2PAS3SFWBW 20140602132916001358
START tp_getprots          SFD E      20140602132917              sfdadm       SSC2PAS3SFWBW 20140602132916001358
STOP tp_getprots          SFD E      20140602132920              sfdadm       SSC2PAS3SFWBW 20140602132916001358
STOP EXPORT PREPARATION   SFD e      20140602132920              sfdadm       SSC2PAS3SFWBW 20140602132916001358
ERROR SFDK905836           SFD f 0012 20140602133526 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905836           SFD f 0012 20140602133540 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905838           SFD f 0012 20140602144313 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905838           SFD f 0012 20140602144350 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905838           SFD f 0012 20140602144430 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905838           SFD f 0012 20140602150202 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905838           SFD f 0012 20140602150208 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905838           SFD f 0012 20140603080634 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905838           SFD f 0012 20140603081006 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905838           SFD f 0012 20140603083952 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905838           SFD f 0012 20140603084005 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905840           SFD f 0012 20140603091608 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905840           SFD f 0012 20140603091617 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905842           SFD f 0012 20140603091826 default_user A559420      SSC2PAS3SFWBW
ERROR SFDK905840           SFD f 0012 20140603093805 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905840           SFD f 0012 20140603101944 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905840           SFD f 0012 20140603102709 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905840           SFD f 0012 20140603114753 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905840           SFD f 0012 20140603121948 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905840           SFD f 0012 20140603122039 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905840           SFD f 0012 20140603123438 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905840           SFD f 0012 20140603135937 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905840           SFD f 0012 20140603140114 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905840           SFD f 0012 20140603140233 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905840           SFD f 0012 20140603140339 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905840           SFD f 0012 20140603141743 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905840           SFD f 0012 20140603150924 default_user BASIS@ORIGIN SSC2PAS3SFWBW
ERROR SFDK905844           SFD f 0012 20140603152403 default_user A559420      SSC2PAS3SFWBW
ERROR SFDK905844           SFD f 0012 20140603152753 default_user A559420      SSC2PAS3SFWBW
ERROR SFDK905844           SFD f 0012 20140603153518 default_user A559420      SSC2PAS3SFWBW
ERROR SFDK905844           SFD f 0012 20140603162013 default_user A559420      SSC2PAS3SFWBW
ERROR SFDK905844           SFD f 0012 20140603162544 default_user A559420      SSC2PAS3SFWBW
ERROR SFDK905844           SFD f 0012 20140603162639 default_user A559420      SSC2PAS3SFWBW
ERROR SFDK905844           SFD f 0012 20140603162755 default_user A559420      SSC2PAS3SFWBW
ERROR SFDK905844           SFD f 0012 20140603163347 default_user A559420      SSC2PAS3SFWBW
ERROR SFDK905844           SFD f 0012 20140603163740 default_user A559420      SSC2PAS3SFWBW
Rgds,
Ashok

Transport fails with return code 12 for 0CHANOTASSIGNED Characteristics

Dear Experts,
I am transporting the 0CHANOTASSIGNED characteristics from BI Dev to BI QA.
In BI Dev, I use the option Necessary Object.
While importing request into BI QA, it fails with a return code 12. Some of the errors are:
Start of the after-import method RS_IOBJ_AFTER_IMPORT for object type(s) IOBJ (Activation Mode)
System error in lock management
Error AD 025 during after import handling of objects with type(s) IOBJ
Start of the after-import method RS_IOBC_AFTER_IMPORT for object type(s) IOBC (Activation Mode)
Error when checking the InfoObjectCatalog 0CHANOTASSIGNED
InfoObject 0ABCINDIC is not available in active version
InfoObject 0ABCPRC_TYP is not available in active version
InfoObject 0ABCPROCESS is not available in active version
InfoObject 0ACCT_TYPE is not available in active version
InfoObject 0ACTIONREAS is not available in active version
This goes on for lot of infoobjects. If I were to goto RSA1 of BI QA and check any of the above objects, they are 'INACTIVE'.
But they are 'ACTIVE' in BI Dev.
Please help me in resolving this issue.
Thanks and BR,
Raj Jain

Hi I.R.K,
I recreated a trasnport for just one Infoobject (0ABCINDIC) which was one of the objects not active as shown in the logs of BI QA while transport.
I did not make any changes or delete any data etc. I then just transported these request from BI Dev to BI QA.
The transport was successful with return code 0. I then checked this object in RSD1 of BI QA and it was activated.
Any ideas what may be the cause???
Thanks,
Raj Jain

Transport Request Ended with return code: === 12 ===

Hi
Good day to you.
We are able to move Transport Request from Development BW Client (with respect to an SEM-BCS Configuration) to Quality BW Client smoothly.
But when we move the same TR to Production client, we are getting the following error message. I would be very grateful if somebody could throw light on why it is happening, what could be its implications and what to do to avoid the same
Execution of programs after import (XPRA)
Transport request   : DBWK901288
System              : PBW
tp path             : tp
Version and release: 340.16.37 640
Post-import methods for change/transport request: DBWK901288
     on the application server: sapbwpd
Post-import method FINB_TR_AFTER_IMP_METHOD started for UCREPGROUP T, date and time: 20081029144344
Post-processing taking place in client 300
Import carried out using RFC destination PBWCLNT300
Communication error: Destination PBWCLNT300 -> long text
Errors occurred during post-handling FINB_TR_AFTER_IMP_METHOD for UCREPGROUP T
FINB_TR_AFTER_IMP_METHOD belongs to package FINB_TRANSPORT_TOOL
The errors affect the following components:
     FIN-FB (Financials Basis)
Post-import method FINB_TR_AFTER_IMP_METHOD completed for UCREPGROUP T, date and time: 20081029144351
Post-import methods of change/transport request DBWK901288 completed
       Start of subsequent processing ... 20081029144344
       End of subsequent processing... 20081029144351
Execute reports for change/transport request: DBWK901288
     on the application server: sapbwpd
There are no reports to execute
Execution of programs after import (XPRA)
End date and time : 20081029144351
Ended with return code: ===> 12 <===
Regards
Siddique

Hi Siddique,
Looks like your RFC destination is wrong. The proper syntax is FINBTR@<system>CLNT <client>.
See also the note 644610.

Importing error Ended with return code: === 8 ===

Hi Experts,
I am trying to transporting an infoobject 0EMPLOYEE from Dev to Production.While importing the request I am getting an error like
Execution of programs after import (XPRA)
Transport request   : BD1K901543
System              : BP1
tp path             : tp
Version and release: 372.04.36 700
Execution of programs after import (XPRA)
End date and time : 20090206164251
Ended with return code: ===> 8 <===
after expanding this error msg i am getting
Start of the after-import method RS_IOBJ_AFTER_IMPORT for object type(s) IOBJ (Activation Mode)
Characteristic 0CM_CTAR: Unit 0UNIT_DIM no allowed in compounding
Characteristic 0CM_SHAR: Unit 0AREA_UNIT no allowed in compounding
by clicking on the error mag
Diagnosis;
If the characteristic is used in an InfoProvider with dimensions (for example, an InfoCube or MultiProvider), the compounded unit is not unique if currency key figures are used at the same time.
System Response
This type of modeling is not supported.
Procedure
Replace the currency with a different characteristic. If you nevertheless want to use a unit in the compounding, you should use the modeling of a characteristic that semantically represents a unit. To do so, copy the technical properties of the unit of measure or the currency.
How can I solve this problem?
Can add any other char to this compounding char is it works?if yes which currency char i need to add here?
Thanks & Regards,
Sridhar

Hi Sridhar,
        I am facing the problem with 0CM_CTAR and 0CM_SHAR. both the characteristics are not allowed compouding ATTRIBUTES.
0cm_ctar not allowed comp .attr of 0unit_dim
0cm_shar not allowed comp.attr 0f area_unit.
for this reason what i need to do. Please give me help on this.
sridhar could you give me solution what i need to do. i am also implement same sap note or any other solution you have.
Please kindly give me reply.
Thnaks,
Guna.
Edited by: gunasekhar raya on Apr 14, 2009 6:16 PM

-Support package-Test import---Ended with return code: === 8 ===(Urgent)

Dear all, using -
>   SAP ECC 6.0 with IS - AFS 6.0
Environment -- Win2k3 with Orc 10.2
Kernel              700 - 75
Spam/Saint -     70026
R3trans -d         <0000>
STMS is very consistent.
Met all the pre-requisites when applying Support packs & going succesfull
but
While applying
Sapk-60004inafs CRT with sapkh 60009,10,11 in
Test_import phase it is showing the following error for
sapkh 60010.
Test import
Transport request   : SAPKH60010
System              : MBD
tp path             : tp
Version and release: 370.00.09 700
R3TRPROGJ_1IRUTZN was repaired in this system
R3TRPROGJ_1IRUTZN was repaired in this system
Test import
End date and time : 20080410100230
Ended with return code: ===> 8 <===
When im runing with 700-75 is it possoble to import latest TP
<SAR tp_145-20001354.sar TP 145 Info 3317 30.01.2008 >
in to existing kernel. plaese coment on this as i think it's a TP error.
please also advice me in different areas.
Cheers,
Rahul

HI thanx a lot ,
It the same procedure i did & checked your message indicating the same steps .
Yes ,standard object is repaired in system & im not aware of that
& even it is not shown that it is recorded to work bench change request when i started applying the support pack.
I did the same went to SE03 selected the object .
Selected lock overview
Identified the change request & released it.
I got one more doubt what happens when i set the object to repair flag.
Cheers ,
Rahul

Tp finished with return code: 208

Hi Basis Gurus,
I have received transport data and cofiles from system XYZ. I have copied data and cofiles in /usr/sap/trans/data and /usr/sap/trans/cofiles respectively.
Now I have change my directory to /usr/sap/trans/bin
I want to see the Object List before I import the transport request to my test system TST. I have added the transport request XYZK92????? to buffer with tp addtobuffer command and it is successful. Now when I am trying to see the Object list with command tp GETOBJLIST it is giving error message
This is tp version 340.16.12 (release 640)
System XYZ is not defined in TPPARAM
ERROR: System XYZ is not defined in TPPARAM
tp returncode summary:
TOOLS: Highest return code of single steps was: 0
ERRORS: Highest tp internal error was: 0208
tp finished with return code: 208
meaning:
error in transportprofil (param missing, unknown,...)
XYZ system is the system from where I got the transport request and it is not defined in my STMS domain. I guess we can import transport request from any other SAP system.
How to resolve this issue ? is any one aware of this.
Thanks
Best Regards,
CK

I have created the TPPARAM with the above entry. Now getting different error:
~
This is tp version 340.16.12 (release 640)
Warning: Parameter DBHOST is no longer used.
Warning: Parameter DBLIBPATH is no longer used.
Warning: Parameter DBNAME is no longer used.
Warning: Parameter DBSWPATH is no longer used.
This is R3trans version 6.13 (release 640 - 12.12.05 - 14:24:42).
1AETW065 check-sum error in datafile after "1972" bytes.
2EETW000 Please contact the SAP support.
exiting ...
R3trans finished (0016).
tp returncode summary:
TOOLS: Highest return code of single steps was: 16
WARNS: Highest tp internal warning was: 0101
tp finished with return code: 16
meaning:
A tool used by tp broke down

Unable to reorganize BIA with return code 5528 error

Similar Messages

Maybe you are looking for