Unable to replicate SRM users in SAP Portal

Dear All,
We've followed the below link to auto replicate the SRM Users in SAP Portal:
http://help.sap.com/saphelp_srm70/helpdata/en/08/bae789ee8743d5b4cb2fbf93a9831b/content.htm?frameset=/en/08/bae789ee8743d5b4cb2fbf93a9831b/frameset.htm
But after doing all the configuration steps, we are yet not able to replicate the SRM users in Portal.
SPML Destination Connection test is successful and all other configurations are done and cross checked.
Is there any report program that we have to run / schedule for the user replication.
Please suggest.
Regards,
Anurag

Dear Carl,
The above link that you've shared talks about replicating user accounts from UME to the SAP System.
However in our scenario, we want the replication from SAP system to UME. So, it's a reverse scenario.
The link that I've shared above in my thread talks about my scenario and in fact we've done all the configuration steps also.
But it is not working at the moment and I believe that there must be some additional setting / trigger point that would initiate the replication.
If somebody has already come across such scenario, please advice.
Regards,
Anurag Gwari

Similar Messages

Vendor user in SAP PORTAL

Hi experts
I am configuring EBP-SUS and my vendors will use for bid responses, but ineed the vendors access SUS via SAP PORTAL, so when vendor receive an e-mail with user and pass to create a adiministrator after create a user bidder that must have access in SAP PORTAL to receive bids, the problem is in Supplier Relationship Management - Supplier Self-Services - Master Data -Maintain Systems for Synchronization of User Data I can use only logical system and the creation is done using RFC call, and SAP PORTAL IS a java aplication.
Some help will be welcome.
Nilson

Hi Nilson,
Can you please explain the issue with more clarity.
Thanks,
-Devi Swain

Bex query crash for user on sap portal

hi gurus
i have a bex query which users see it through sap portal, i have the case where a user X has made some drill down between rows and columns of the query (over portal), and since then every time this user X open the query, portal shows the query on the rows-columns format that the user X used once.
What can i do in order user X see que query (on portal) in the default rows-columns??
This problem just happen with user X, others users see the query in the default format with no problems.
I ve tried deleting the portal personalization for user X on sap portal, but the problem persists...
suggets?
regards..
joker

If its Java only error then there wont be any dump in ST22.
Strange issue for you, in general if we get 500 error, there should be details of it in the same page.
You said this issue is occuring for only one user, is it getting replicated every time?
You are also seeing the same error when u login as that particular user?
Do one thing, assign him the Content Admin role and then do the preview of this iView form content admin and see if ur still seeing this error.
Regards
Yugandhar Reddy

Bex query crash for a user on sap portal

hi gurus ,hope this thread match here...
i have a bex query which users see it through sap portal, i have the case where a user X has made some drill down between rows and columns of the query (over portal), and since then every time this user X open the query, portal shows the query on the rows-columns format that the user X used once.
What can i do in order user X see que query (on portal) in the default rows-columns??
This problem just happen with user X, others users see the query in the default format with no problems.
I ve tried deleting the portal personalization for user X on sap portal, but the problem persists...
suggets?
regards..
joker

Hi Arjun
Please check the SAP portal and BI system version and then check the compatibility for BEx Query in IE9.
Refer to http://service.sap.com/pam >> Click on SAP Netweaver version, here you can find the PDF files.
BI (BEX Web) is supported on IE9 with SAP porta version 7.0 SPS24 in vista or windows 7 if you SAP portal version is 7.0
Best Regards
Arun Jaiswal

How to get the specific name of the workset which is currently selected by the user in sap portal 7.0

Dear Expert,
I have one requirement like to read the selected workset name in portal by the current user.I have read two documents regarding how to retrieve the PCD contents (iViews, Pages, Worksets and Roles) and its properties like Created by, Changed by, Last changed by and others using PCD API.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/6112ecb7-0a01-0010-ef90-941c70c9e401?overridelayout=true
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/508baf88-9335-2d10-efa6-c6ad61e5fc4b?quicklink=index&overridelayout=true
But I am not able to understand how to get the specific name of the workset which is currently selected by the user.Can you please help me.
I am using portal 7.0.
Thanks & Regards,
Patralekha

Hi Expert,
I found that we can use Interface INavigationHelperService to read Portal Role selected by user at runtime from http://scn.sap.com/thread/52194
But this class is available in SAP NetWeaver 7.30 Enterprise Portal .
But in SAP NetWeaver 7.0 Enterprise Portal that interface is not available.
INavigationService is available there.
But didn't get any proper discussion on this interface for the same requirement.
Can you please help me.
Thanks & Regards,
Patralekha

SAP Portal users

Hi All,
Our SAP Potal 6.0 system connected with LDAP application. Once users created in LDAP application will create those users in SAP portal systems also.
All the end users accessing SAP application ECC, BI and SRM through portal. I want to check how many users using portal application alone. Please let us know the procedure.
Regards,
MK
<removed_by_moderator>

Use the Portal Activity Report.

Display attachments in SAP work list (at user decision) from portal.

Hi Experts,
How can we get the uploaded attachment form portal to SAP UWl .
We have requirement like user wants to upload the travel expenses related documents (.PDF,.Txt or .doc files) in portal that attachments needs to available in approver inbox as link at user decision level.
We have done the binding part and we are getting the attachment from first level to next level but unable to get the attachments uploaded in portal.
I found one link but itu2019s not working.
How to store Multiple Attachments in Workflow.
SAP_WAPI_GET_ATTACHMENTS by using this function module I am getting only OBJECT_ID                                SOFM
DESCRIPT                       Office Document
SHORTTEXT                      Office Document
Please help....good Rewards for useful answers ....
Edited by: RameshG on Jan 12, 2011 7:04 PM

Dear Ramesh,
Need your help!
While creating travel expense request from Enterprise Portal, travelers create few attachments [pdf/doc/xms/txt] and then save the travel expense reports.
A workflow then gets triggered and this travel expense report reached the SAP Inboxes of the checkers [in the finance department].
The issue here is that these checkers do not have access to enterprise portal and they expect to see the attachments [that the traveler has created via the portal] via corresponding work items in their SAP Inboxes u2013 which currently is not happening!
I checked the trip transaction that got created [in the backend / in SAP] and found the u2018attachment listu2019 menu option in GOS being disabled [may be because there is not even one attachment that has come to the backend!]
What needs to be done so that the attachments can even be viewed from the backend / from SAP Inbox? Does this involve coding?
Please suggest!
Br,
Hari

Unable to view HCM adobe forms for one employee in sap portal

Dear Sap Gurus,
we are Unable to view HCM adobe forms for one employee in sap portal.
Regards
Srinivas

Hi,
What error you getting? Did the user has the authorisation? Is his system has Adobe installed?
Please perform normal checks.

I m unable to loginto SRM attendance thru portal what could be the issue

i m unable to loginto SRM attendance thru portal what could be the issue

Hi
Please elaborate your question with more details. Which SRM version are you using ? What transaction are you using in this case ?
Any error / warnings here ?
Are you looking for "Managing Employee Time and Attendances" ?
See these SAP OSS Notes as well ->
Note 824757 - Dependencies between mySAP ERP component lists
Note 793148 - Texts on item are not displayed in the auction
Please ask BASIS Team to provide suitable roles and authorizations for this transaction.
Hope this will help. Do let me know.
Regards
- Atul

How to restrice ananymous user access to portal link /irj/servlet/prt/portal/prtroot/com.sap.portal.navigation.portallauncher.default?

Hi experts,
We had an issue with portal access. I wonder if portal is venerable for security threats?
Could you please let me how to restrict the unauthorized users (anonymous user) to the portal URL.
https://HOST:50001//irj/servlet/prt/portal/prtroot/com.sap.portal.navigation.portallauncher.default .
Appreciate your help.
Regards
Maruti

Hi Maruti,
Hope you are doing good.
Can't you just amend the portal permissions so that this access is not possible.
The PCD location should be:
com.sap.portal.system/security/sap.com/NetWeaver.Portal/no_safety/com.sap.portal.navigation.portallauncher....
Hope this helps.
Thank you and have a nice day!
Kind Regards,
Hemanth

How to access Sap portal login user in ejb web service

Hi,
I wnt to access SAP Portal login user in my ejb application which resides on the same server.
I am using following code
try {
     IUser user =null;                         IWDClientUser wdUser = WDClientUser.getCurrentUser();
                              user = wdUser.getSAPUser();
                         } catch (WDUMException e) {
                              // TODO Auto-generated catch block
                              e.printStackTrace();
Some additional jar files are required for this?
The same code works fine with webDynpro but not with ejb.
Thanks in advance
Best regards,
Nilesh

Thanks for reply.
I have already added com.sap.security.api in my EJB module project classpath. How to add the same in EJB application Project (application-j2ee-engine.xml)?
Best regards,
Nilesh

How to tranport the users from SAP R/3 to portal ?

Hi All,
I had connected to SAP R/3 system from portal. I am trying to tranport the users from SAP development server . So that everyuser can enter through the portal only and work on SAP.
Please guide me the procudure how can i tranport the users from SAP system to portal.
Please urgent replies are appreciated .

Hi Abhishek,
Thanks for your information.
please let me tell you the detailed information. My basis guy had configured the system for me as i didnt have any idea on installation procedure. So i am facing th e fallowing problems.
 First Problem
I am not able to create the user from portal directly. Its showing the fallowing error.
An error occurred in the persistence; contact your system administrator.
so i had created the users in WAS by SU01.
Second
We have some users at production server ( Assume 5 users ). and those users need to be mapped at portal. So that those users can directly enter into portal and operate on SAP system .
If u dont mine Please provide with me the steps to fallow
Third
i had created some transactional Iviews that are working fine when i am log in with Administrator( super administrator role). The problem is that the reports are not showing when i am log in with general user ( with out super administrator role ) .
Its showing the error
Could not able to look up the system.
And the problem with user mapping also .
For aministrator its working fine .and for a general end user ( created on WAS )
i am not able to provide user mapping. Its showing
There are no systems available for user mapping for the selected principal
wat could be the problem ?
Your solutions will be appreciated .please urgent

Error while creating user in LDAP (MS ADS) from SAP Portal 7.0

Hi,
Is it obliged to use SSL connection to create new user in LDAP (MS ADS) from SAP Portal 7.0 ?
I've configured the UME with ldap server adress and port 389. And use configuration file "dataSourceConfiguration_ads_writeable_db.xml"
I succeed to view users existing in LDAP but when I try to create new user I've the following error message:
LDAP: error code 53 - 0000001F: SvcErr: DSID-031A0FC0, problem 5003 (WILL_NOT_PERFORM), data 0)
Thanks and regards

check this link
http://help.sap.com/saphelp_nw70/helpdata/EN/37/cfd93f130f9115e10000000a155106/frameset.htm
and at the end of the page there is a qoute "We strongly recommend that you configure SSL between the UME and the LDAP directory. Some LDAP directories, such as Microsoft Active Directory Server, require an SSL connection if you want to create users on the LDAP directory"
hence follow this link to configure SSL
http://help.sap.com/saphelp_nw70/helpdata/EN/7d/77fa735e5f47a2a50b5336fd1b5a61/frameset.htm
hope this helps..
[Rahul|http://rahulursportal.blogspot.com/]

How to allow user to change SAP Portal password by themselves

We would like to allow user to change SAP Portal password by themselves. However, I added role Manage_My_Password and Manage_My_Profile to a user account. After logoned with this user account and opened the option 'Personalize'. I only find the page allow me to customize the page layout. But I haven't find tab for changing profile and password.
Pls advise.
Thanks.
Edward

Hi Edwar,
You can hide the pages from portal personalization workset. copy the workset and select the page and click on property -> select Invisible in Navigation Areas ->yes
You can find the workset under
Portal content->End user content->Standard Portal Users>Workset->Portal Personalization
If you want a custom developed application fro change password see the below blog
A Change Password Application
Hope it helps
Regards
Santosh

SAP Portal unable to recognize AD requirement to change initial password

Hi,
We configured Active Directory server (2008 R2) as UME for SAP Portal (Netweaver 7.01 SP7). We matched as many of the security parameters as possible* (ex. minimum password length, require one number in password, etc.). The AD parameter "User must change password at Next logon" is set ON. However, upon attempt to login to SAP Portal with the initial password that was set in AD we are not prompted to change the password. Rather, the SAP Portal logon attempt fails with message: "Authentication Denied"
Has anyone dealt with this problem before?
Other information:
*Our MarketPlace researched indicated that the SAP Portal parameter "ume.ldap.security_policy.password_change_required" (which would correspond to the AD parameter mentioned above) is no longer an available parameter for our SAP Portal version (Netweaver 7.01 SP7).
In our version of SAP Portal, the AD parameter "User must change password at Next logon" has one parameter which is similar, but does not directly correspond. The SAP Portal parameter which we do have is "No password change required". Notice this is the logical opposite of the AD parameter: AD says to require the password, whereas SAP Portal says it's NOT required. Therefore, when the AD parameter is set to ON, this results in the Portal parameter being set to OFF. Even still, we face the login failure.

You have to note here that implementing SAP IDM is only ONE of the possible options you have. The implementation of IDM in itself is a huge undertaking because of the number of systems and the decision making process involved with it.
In one of my previous implementations, when SAP IDM was not around, we had Tivoli Access Management tools which took care of the password problems.
even though we implement IDM and deploy IDM UI on Portal , still user should change password before it expires on AD right ?
Even with IDM in place, user will not be able to login to SAP portal with an expired AD password. However, in our case, we provide a link on the logon page of SAP portal to the IDM password self service application which will allow the user to change the password.
Does IDM has any feature like sending notifications before password expiration period ?
I don't think it does - however I have not explored this option in IDM since most of our users do not have email addresses and we cannot send a reminder. You should be able to create a task (with some customization) in IDM to achieve this.
Also will the IDM implementation help us in creating users with option "User should change password at next logon" on AD ?
Yes - IDM does create users with option "User should change password at next logon" in AD.
With IDM in place and tied to AD, it should be the central place of creating users. It is recommended NOT to create or manipulate the users in any target systems (SAP, AD, etc). IDM should be taking care of all the user provisioning activities.
is this like a work around to allow users to change password from Portal before it gets expired on Active Directory(AD) ?
This is not a work around - it is rather a full blown identity management solution for all your company needs.
You will get a lot of your IDM specific questions answered in the Identity Management forum.
Thanks,
Shanti

Unable to replicate SRM users in SAP Portal

Similar Messages

Maybe you are looking for