Unable to reset time and date after a software upgrade
unable to reset the time and date after a software upgrade on the TV
hello
I'm having a similar problem with my macbook. I just did a software update and now I can't get onto my internet. I checked the network diagnostics and the connection is fine, except when i click on the safari icon nothing happens.
Can anyone help with this?
Thanks!
Similar Messages
-
Unable to reset time and date after update
ANyone know how to update date and time after most recent update? Not doing automatically
Hello john.george,
You may need to verify that TCP port 123 is open and available for use on your router.
TCP port 123 is used to communicate with a network time server.
Apple TV: TCP and UDP ports and protocols used
http://support.apple.com/kb/HT2463
Cheers,
Allen -
I have to reset time and date after booting
My mac pro cannot hold date and time.
so far, I have replaced the pram battery and done the pram reset several times.
at first i noticed that the sys pref panes were unlocked when I went in to change the time and date but I have since cured that in sys pref/security.
the governing factor seems to be wetherr or npt is a revoot or completely cold boot (mains power switched completely off)
the expected message comes up i.e. " your system clock is set to a time and date before 1.1.2008 some progs may bave erratically blah blah "
the actual time has reset to 1.1.2001 ( dont know if that is significant but mentioned it just in case).
So, if i just shut the machine down and then boot it up again, no probs
if i restart, no probs
shut down and pull the plug ?? 1dt, Jan 2001
would appreciate some adviceClick here and ask. If they tell you to call, and they probably will, accept that.
(123024) -
How do i reset time and date on my itouch
how do I reset time and date on my itouch?
Go to Settings>General>International and make sure that Calendar is set to Gregorian.
Bext
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
Ibook G4 shuts down unexpectedly and resets time and date
More and more frequently my iBook will shut down completely unexpectedly when not plugged in. This happens regardless of how much battery life it has or it claims to have (80%, 40%, 20%, 12%). It will not start up again from battery only. When I plug the computer and restart it, it has reset time and date to Wed March 31 1969, 19.31 pm. It alerts me that the time is set to before 2001 and this may lead applications to behave erratically.
Is this normal? Why is this happening?
I have a few months left of my APP, but that doesn't cover battery related problems, right?Hi astaver and welcome to Apple Discussions.
If you are still using the original battery from a nearly 3 yrs old iBook then it is almost certain that the battery has reached the end of its useful life. The symptoms you describe more or less confirm this.
To check on battery health go to the Apple Menu>About this Mac>More Info>Power>Battery and copy/paste the info into a reply.
You can also download and install Coconut Battery which gives a GUI to the same info.
You are right in assuming that Applecare doesn't cover you for a dead battery of this age but you might like to see if you qualify under the iBook & PowerBook G4 - Battery Exchange Program.
Good luck,
Adrian -
I own an old PowerBook G3 that turns o only on battery. And, even so, always resets time and date. Whenever I connect the power cable, it turns off. In addition, I a interested in refurbishing my old G3. And, a lesser old G4 LCD that shows a yellow vertical hair-width stripe.
Thank you in advance.What model PowerBook? The internal PRAM battery has discharged and is not recharging. You'll need to replace the battery. This site has instructions. http://www.ifixit.com/Browse/PowerBook
The PRAM battery is not easy to change on some PB G3 models. I changed the battery on a Wallstreet model. Had to totally disassemble to do it. Bought the replacement battery on eBay.
Cheers, Tom -
Nokia 6230i forgetting time and date after 1sec ba...
Im used to that my 6230i and other nokia phones remember time and date after a sim card switch. The 6230i has now however started to forget time and date after sim card switch or just 1 sec battery removal.
What is the problem and how can it be fixed?
ThanksHi heraldo
There is I think a capacitor used to hold sufficient charge and this may now have failed. Entry level Nokia phones no longer retain time and date at all if battery removed.
Is your phone still under warranty?
Happy to have helped forum in a small way with a Support Ratio = 37.0 -
Why is my macpro reseted time and date?
Ok,eventually my macpro reseted his date and time to something about 2001... The point is,that i bought this laptop from a friend few months ago, and i even forgot to ask for a login password,and after that and didnt even consider reseting users. The problem with the time and date change,came another problem,i cant even use safari regulary,on sites such is facebook,or even apple .com,without getting a verification security verisign,without blocking the site that i am trying to get in to. Only way is to "trust" that site is manually sign it as "trusted" with your login and a password from your mac. Which i dont know,even my friend dont know the password,the one that i bought it from. Just to make some things straight,its not stolen,i bought it from an original owner,no matter how awkward this situation looks like. Thanks in advance for a any ideas.
Hi all
I have the same problem. When I put the touch to sleep, it seams that during the sleep phase, the time stands still and after power it on again, the time & date is reseted to the default settings.
Hope someone have an idea or a solution for this problem.
Cheers, istvan72 -
MSI 760GM-P34 (FX) restarts and resets time and date
this motherboard started resetting itself, especially on Facebook.
I will be surfing or whatever and it will shut down and restart.
I get the normal windows error that it shut down unexpectedly and then everything loads normally.
if I shut it off completely, then restart, I get one beep then two beeps and it resets the time and date to 2012.
I have replaced the battery, reset the bios with the jumper, tested the hard drives , CPU, power supply, card reader, video card, and everything else. All checked out fine and in working order.
the computer seems to run fine as long as I don't shut it off or as long as it don't reset its self.
the temp is around 70 degrees and everything seems fine otherwise.
what could be causing this?
I like MSI boards but I'm thinking of going with ASUS or another brand if this motherboard is taking a crap after only 2 years. (I bought it Brand new)
MSI 760GM-P34 (FX)
AMD Phenom 2 X4 955 Black Edition..Never overclocked
XFX PRO 650 WT Power Supply
8 gigs Crucial Ballistic DDR3 memory
Hyper 212 Plus CPU cooler
Geforce 9800GT video card
Seagate 320 GIG SATA HD
Seagate 500 Gig SATA HDQuote from: badboy2k on 17-June-14, 15:46:27
if you do not have it installed already download MSI Control Centre from here http://www.msi.com/support/mb/760GMP34_FX.html#down-utility&Vista%2064 and install it! start the program and click overclocking-Basic and see what it says the DRAM voltage is set to there!
it basically goes from " Core" X 800 - 2173.5 and "Ratio" X 04 -X 10.5
CPUID HWM shows this: -
Why my atv can't set time and date after restoring it using itunes ?
when my atv restarting after I restored it using iTunes, it can't set the time and date.
the atv is connected to the net by wi - fi.
when I try to sign in using my apple id, I get a massage that the password is incorrect.
I have apple tv with ios 7.The network and signal test on device won't give the full picture, for that you need a network report. Go to istumbler, netstumbler or similar, that will show true signal strength as well as any nose detected. You can also try Ethernet to help rule out WiFi issues.
-
im trying to set up my apple tv just after ive updated to the latest version, but it wont pass the setting time and date screen
what can i do?
HELP!Hello john.george,
You may need to verify that TCP port 123 is open and available for use on your router.
TCP port 123 is used to communicate with a network time server.
Apple TV: TCP and UDP ports and protocols used
http://support.apple.com/kb/HT2463
Cheers,
Allen -
Macbook procannot reset time and date
I have macbook pro (2009). The time and date has been set to prior to 2008 and does not allow me to modify.
Back up all data.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Please triple-click anywhere in the line below on this page to select it:
sudo date 0109000014
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing the key combination command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting. You'll be prompted for your login password. Nothing will be displayed when you type it. If you don’t have a login password, you’ll need to set one before you can run the command. You may get a one-time warning to be careful. Confirm. You don't need to post the warning.
If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. Log in as one and start over.
Wait for a new line ending in a dollar sign ($) to appear below what you entered. You can then quit Terminal. Try again to set the date. -
1130AG Won't Hold Time And Date After A Reload
Hello - I am currently deploying 1130AG standalone access points to all my locations. I am having trouble getting them to consistantly authenticate against AD using RADIUS and PEAP. I have noticed that all the access points revert back to a date in 2001 or 2002 after every reboot. So, first, after I issue the clock set command and fix the time and save it, how do I get it to hold that after a reboot. And second, could the time/date mismatch be causing a problem with authentication? Here is a typical config that I am using:
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
hostname S064AP
enable secret XX
aaa new-model
aaa group server radius rad_eap
server 10.0.64.10 auth-port 1645 acct-port 1646
aaa group server radius rad_mac
aaa group server radius rad_acct
aaa group server radius rad_admin
aaa group server tacacs+ tac_admin
aaa group server radius rad_pmip
aaa group server radius dummy
aaa authentication login eap_methods group rad_eap
aaa authentication login mac_methods local
aaa authorization exec default local
aaa accounting network acct_methods start-stop group rad_acct
aaa session-id common
ip name-server 10.0.64.10
dot11 ssid S064WLAN
authentication open eap eap_methods
authentication network-eap eap_methods
authentication key-management wpa
guest-mode
infrastructure-ssid optional
power inline negotiation prestandard source
username admin password XX
username Cisco privilege 15 password XX
bridge irb
interface Dot11Radio0
no ip address
no ip route-cache
encryption mode ciphers tkip
ssid S064WLAN
station-role root
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
interface Dot11Radio1
no ip address
no ip route-cache
shutdown
dfs band 3 block
channel dfs
station-role root
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
interface FastEthernet0
no ip address
no ip route-cache
duplex auto
speed auto
bridge-group 1
no bridge-group 1 source-learning
bridge-group 1 spanning-disabled
interface BVI1
ip address 10.0.64.205 255.255.255.0
no ip route-cache
ip default-gateway 10.0.64.1
ip http server
no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
ip radius source-interface BVI1
snmp-server community XX RW
radius-server host 10.0.64.10 auth-port 1645 acct-port 1646 key XX
bridge 1 route ip
line con 0
line vty 0 4
endYou can enable SNTP to synchronize your clock.
Command: sntp server -
Apple stays on setting time and date after restore
apple tv stays on loading setting time and date
It is having trouble connecting to the network. Make sure location is set correctly. DNS should be on automatic (settings - general - network). If on wifi try ethernet.
-
ATV 3 (a1469) 7.1 cannot get time and date
Hello!
My Apple TV (3 gen) with software 7.1 is unable to get time and date and activate. As a consequence, ATV has very limited functionality because I can't even access iTunes or iCloud.
I tried recovering ATV by plugging it to the compuer using iTunes (on both PC and Mac), tried to connect ATV to another wi-fi network, tried plugging ethernet cable.
"time.apple.com" is accessible from my network, ping goes well.
What can I do to fix it?I tried both leaving settings on default values and setting correct places, didn't change anything.
I also tried to downghrade firmware to earlier versions but failed due to "unknown error".
Maybe you are looking for
-
ALV grid export to Excel 2003-f.01
Hi all, I have an issue with ALV grid export to excel 2003 ,when i tried to download with the option as local file > xls file ,the report downloads with page breaks which the user does not want , each break comeswith header . With the option of list>
-
How to display multiple records in a block text items
Can fetching be done to dispplay multiple records in the text items base on the query.
-
Hi All, I am new to Lockbox configuration.have completed the lockbox configuration. When i uploaded the file using FLB2 i am seeing the below points: 1. Invoice not getting cleared even though everything has matched.It shows as "On Account". Need to
-
Is Adobe reader touch for windows 8 support interactive PDF files with multi media contents like SWF
I have many PDF files with SWF content i try Adobe reader X but it is slow, so i try Adobe reader touch for windows 8 but the SWF doesn't work.
-
Is there other adobe apps that are available for tablets other than apple?
I see that there are several apps that are available for apple users. And I didnt know that photoshop was available to other devices until now. Either i am blind or it isnt as advertised. Is photoshop the only app available to other devices other tha