Unable to resize the Edit window in Premier Elements 11

I am unable to resize the premier elements edit window - it just leaves a trail of images of the edit window on the screen when I try to make the window smaller - It doesn't refresh the desktop behind, no problem using and resizing window in Photoshop Elements 11 installed at the same time and also the organise window is resizeable OK just the edit window a problem - any ideas - I am using Windows 7 64 bit?

Full -Computer spec is - Windows 7 64-bit, 8Mb RAM, Processor Intel Core i5-2400 CPU @ 3.10 GHz and graphics card AMD/ATI Radeon HD6570 2Gb RAM - Updated windows and Graphics card driver. When rebooted my windows had gone into an Aero theme and worked OK - but putting back to windows classic - problem returned i.e. Organise editor OK but Video Editor with just New Project and no media added resizing window just leaves a trail around the screen. Put back to Aero theme and now OK again. Tried going into System properties / advanced / visual effects / Show windows contents whilst dragging - and turned off but still did not work with Windows classic theme.
So don't know why it is happening but it is at least a work around - thanks for your help.

Similar Messages

How can I adjust the clip speed in the editing window of Premiere Elements 11?

In former versions of Premiere Elements I could change the function while pushing the corner of a clip in the editing window: it was not cutting only, but I could also use it to adjust the speed of a clip (clicked the clock icon, after that the speed of a clip was adjusted perfectly).
But in Premiere Elements 11 this funktion seems to have gone: Now the timeline in the editing window seems to have the cutting function only!
Yes, I still can use the function "prolong time" (or whatever it is called in English, I use the German version), but in this I just can guess what percentage would fit and it's a very hard "try & error" part to get it right. In the former version the speed was adjusted "automatically" to fit the duration the clip needs – that was way more comfortable.
So, is this function really gone? I couldn't emagine why! Or how is this done now?
Couldn't find any post or video, explaning how to do that now.
No: The new "time zone" feature is not the same: it's not adjusting the needed speed rate automatically.
And by the way: There is a bug in that fuction: When I once added a new time zone, I can't remove it – clicking "set back" (or reset) doesn't do anything, the time zone stays where it is and is not deleted at all! I'm using a Windows 7 Ultimate system (64 bit) ...
I really would appreceate if someone could tell me how to adjust the clip speed perfectly to the needed duration of a clip!
Thanks in advance!

SG
An interesting point that you point out
"However, the drag-to-size method of adjusting Time Stretch has indeed been removed from version 11."
I am assuming that you are referring to an earlier version of Premiere Elements, having a Time Stretch icon (clock icon) above the Timeline to select, and then perhaps, with the mouse cursor, dragging on the end of the video clip to increase its duration. The keyboard shortcut to select the "clock icon" in thar instance is X. If you look at Premiere Elements 11 Edit Menu/Keyboard Customization/Windows/Timeline Window/, you will mysteriously find "Time Stretch Tool" command with a keyboard shortcut X. And, if you look at Premiere Elements 11 Edit Menu/Keyboard Customization/Applications/Time Stretch, you will find "Time Stretch" with a keyboard shortcut Ctrl+R. Bottom line: I have not gotten the keyboard shortcut X to work in Premiere Elements 11 in this regard, but the Ctrl+R does to bring up the Time Stretch dialog to do the job.
In accord with this business of what is and what isn't...the good old Razor Tool. That disappeared from sight a long time ago. Yet users were able to use that in later versions using the keyboard shortcut C. Now for me that "C" does not work to change the mouse cursor to a razor for clip splitting at the Timeline level in Premiere Elements 11 in spite of the fact that Edit Menu/Keyboard Customization/Windows/Timeline Window continues to show Razor Tool command with keyboard shortcut C.
On the good news side of things, if one trims a clip in the Preview Window, one is still able to drag that trimmed clip to the Timeline (Expert view) and drag it out on either of its edges with the mouse cursor to recover the whole clip. And, the mouse cursor is still going to be that red ] with a double edged black horizontal arrow going through it.
ATR

Why can't I access the edit program in Premier Elements

I have successfully installed the purchased software for a second time. I can use organizer but when I try the edit mode the prompt reads `" download the trial software now ".

Hi, gigid90. This is the photoshop Elements forum. Premiere Elements has its own forum, which is here:
http://forums.adobe.com/community/premiere_elements
and you'll get better answers to vide questions there.

I recently had some 8mm film transferred to DVD. I am trying to edit the film clips using Premier Elements 4.0. Some of the film clips copy into the project but others don't. I tried copying the VOB filed onto my hard drive and then changing the file ext

I recently had some 8mm film transferred to DVD. I am trying to edit the film clips using Premier Elements 4.0. so I can reburn the films on a single BluRay disc. Some of the film clips copy into the project but others don't. I tried copying the VOB filed onto my hard drive and then changing the file extensions on the VOB files to MPEG but this was no help. Some of the VOB files contain numerous film clips but my software does not appear to be able to recognize them as such. I need to know if replacing my old Premier Elements with the new Version 13 would solve this problem or not. Any advice would be greatly appreciated!
Bob

Bob
What do you have now.....
What computer operating system do you have?
We can go into the finer points of source and your intentions, but for now it would appear that you are using SD 4:3 source media to get to a HD 16:9 result. Lots to discuss in this regard.
What was given to you on the DVD disc? DVD-VIDEO 4:3 or something else?
If DVD-VIDEO on DVD disc, you should expect to find on the disc a folder named VIDEO_TS. That is your target for your video files.
If you were given a DVD-VIDEO on DVD disc, then all you want from it are the video files, specifically
VTS_01_1.VOB, VTS_01_2.VOB, and so on through that series until possibly getting to
VTS_02_1.VOB, and so on. How many files you have beyond the VTS_01_1.VOB file will depend on the size of the DVD-VIDEO.
Does the above scenario apply to you?
The alternative might be someone giving a DVD disc (data disc) which contains just the VTS files mentioned which were copied from
the VIDEO_TS Folder. So, you do not get the whole VIDEO_TS Folder, just the essential video files. Does this scenario apply to you.
I see no need to replace your Premiere Elements 4 with a later version unless you have a huge project and need a later version that will be a 64 bit application running specifically on Windows 7, 8, or 8.1 64 bit computer.
Consider...Premiere Elements 4 and if you have DVD-VIDEO on DVD....
1. Place the DVD disc in the burner tray
2. Open Premiere Elements 4 and set the project preset for NTSC DV Standard (assuming you are working in a NTSC setup)
3. Go to
Get Media
"DVD, Digital Camera, Mobile Phone, Hard Drive Camcorder, Card Reader"
"Adobe Premiere Elements - Media Downloader" and its Advanced dialog.
Set the Source in the latter dialog for the drive which has your DVD disc inserted in its tray
You should see your VTS_01_1.VOB thumbnail in the "Adobe Premiere Elements - Media Downloader" Advanced dialog.
With this VOB selected, click on Get Media to get the file from there into the project.
Should work fine.
Complications may be involved if the people who processed your footage gave you something other what is described above.
Please review and consider, and then we can plan our project strategy accordingly.
Thank you.
ATR

When I access the address book, how can I copy an address without having to open the person's info in the edit window?

When I find a person's address in the address book and highlight their name in one pane, in the lower pane their info shows up. Unfortunately, highlighting the information I want is disabled. So, I open their info in the edit window, and then click on the appropriate tab.
Getting a single piece of information is not so inconvenient, but when you're putting together lists it is rather onerous to do it that way.
Being able to highlight and copy off the address book panes would be cool. Thanks

In an earlier communication, I had said that this was possible, at least with TB on Windows, but I realize now that it's only possible when a certain add-on is enabled: [https://freeshell.de//~kaosmos/morecols-en.html MoreFunctionsForAddressBook]
http://chrisramsden.vfast.co.uk/3_How_to_install_Add-ons_in_Thunderbird.html
Install the add-on, and see if you can now highlight info in the Contact Pane by dragging the cursor. Ctrl-C (or the Mac equivalent) to copy the highlighted text to the clipboard.
You may notice that right-clicking an address in the Contact Pane now shows a Copy command, but a bug in the add-on prevents this option from being active.

How to show photos at 100% size in the Edit window?

Background: I am using iWeb 1.1.1 to re-make my .Mac Homepage website; I love this newer, more flexible application and I love using iPhoto 6.0.4 with it.
My iPhoto 6.0.4 question:
How can I get the photos to show in their maximum size in the Edit box? There are some photos that I want to show as large as possible or even enlarge, and when the photos show at smaller than their exposed size, I feel disadvantaged.
I welcome any advice you send. I am feeling a bad crunch right now because my graphics program of choice, Photoshop Elements 2, is not opening up for me (It's been stopping at the point where the message says: "Photoshop is not sending any personal information") and I cannot find the CD right now. It's here somewhere but...........
— Lorna in Southern California

I welcome any advice you send. I am feeling a bad
crunch right now because my graphics program of
choice, Photoshop Elements 2, is not opening up for
me (It's been stopping at the point where the message
says: "Photoshop is not sending any personal
information") and I cannot find the CD right now.
It's here somewhere but.........
This is very easy to fix. There are many threads
here, at the Adobe forum and in any forum where PE is
mentioned. Quit PE, then take your computer totally
offline (unplug the ethernet cable, shut down airport
if that's what you use). Now launch PE, then go to
Preferences>Adobe Online and set Check for Updates to
Never. There never were any, never will be now for PE
2, so you won't miss anything.
Barbara..... if there never were any updates to PE2 and never will be any, then why would I need to disallow updates?
BTW, I discovered how to get the picture to show up full size. iPhoto 6 is different than iPhoto 4, and while experimenting with some edits I discovered the Small Head — Big Head toggle bar in the Edit Window, and that was my answer.
— Lorna in Southern California

I can't resize the reply window in Mac Mail

My mail is working fine.
If I write a new email it all looks okay.
If I reply or forward an email the window is so wide it would stretch maybe 3 times the width of my screen, so if I want to use any of the tools in the top right toolbar I have to drag the window across.
I can resize up and down to make the window taller or shorter but I can't make it fit onto my screen widthways.
I have rebooted, hit zoom and now I'm stumped.
Any suggestions?
Thanks

Such a simple fix and I spent over an hour on this:
http://www.adobepress.com/articles/article.asp?p=1930509&seqNum=3
This is the part that helped me in case anyone goes nuts trying to figure this out. (#2 solved my problem):
Working with the application window on Mac OS
In Normal screen mode on Mac OS, resize the application window by dragging its lower right corner.
Click the green Zoom button (), located beside the Close and Minimize buttons at the left of the title bar. The application window expands to fill the screen. Click the Zoom button again to return to the previous window size.
Reposition the application window on your screen by dragging the title bar.

Help! screen goes dim, just the editing window

Hi there, I am running photoshop cs4 extended on windows 7 on hp. once in a while my screen goes dim making editing difficult. My monitor is profiled and is fine. the only thing dim is the images on my first screen. I run two screens, when I pull PS over to my other monitor it brightens up. So Its not in my file, and it isn't affecting photoshops menu bars or anything like that, and its only intermitent. the first screen is the profiled one as it is much higher quality, the second screeen is only for tools and web browsing. In have checked a lot of things and have no idea what causes this or any solution, any advice would be great.

Cannot possibly be, as for one it is a desktop computer that has no power management, and two the menu bars, tools and everything else stays the same brightness, it is only the editing window itself.
Thank you for trying, it is appreciated.

In logic X I am trying to normalize but the track and file option in the edit window is not there at all just the drop down for pointer eraser etc. Any ideas? Thanks!..

In logic X I am trying to normalize but the track and file option in the edit window is not there at all just the drop down for pointer eraser etc. Any ideas? Thanks!..

Total life saver. Thank you

Pics don;t open in the Edit window when double clicked

Hi
Need some help please.
I had some problems with iPhoto and after trying to rebuild it etc etc etc, decided to reinstall everything. I backed up the entire library to a DVD, deleted the current library and then created a new one.
Placed DVD in drive and then dragged the the folder iPhoto library into Pictures (which was empty)
When I opened iPhoto everything looked ok. All the folders were there and all the pics were where they should have been.
Unfortunately I cannot open the pics in the Edit window. Just shows a Grey square with an Exclamation mark in the centre.
I have searched all the other threads but still haven't found any information that has helped.
Any ideas?
Many thanks
Jeff

Jeff
The ! or ? turns up when iPhoto loses the connection between the thumbnail in the iPhoto Window and the file it represents. The most common cause of this is User Activity in the iPhoto Library Folder. Have you altered, moved or renamed anything in the iPhoto Library Folder?
If you haven't, then try rebuilding the database. Hold down the apple and option (or alt) keys and launch iPhoto. Use the resulting dialogue to rebuild.
If the rebuild doesn't work, then you will need to create and populate a new library:
To create and populate a new library:
Note this will give you a working library with the same film rolls and pictures as before, however, you will lose your albums, keywords, books, calendars etc.
Move the iPhoto Library Folder to the desktop
Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
Go into the iPhoto Library Folder on your desktop and find the Originals folder. From the Originals folder drag the individual rolls to the iPhoto Window and it will recreate them in the new library.
When you're sure all is well you can delete the iPhoto Library Folder on your desktop.
In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption.
Regards
TD

How to resize the itunes window in mavericks?

How can I resize the itunes window in mavericks if the window is larger than the screen?
Since the window is larger than the screen I cannot use the scroll-bar anymore properly...
And since resizing is in the lower right corner that leaps out of the screen I can't resize it...
any clues anyone?

https://discussions.apple.com/message/16758346#16758346

Rendered composite doesn't show the layers I see in the edit window

In exporting or rendering a segment or a still frame of a four layer composite, I don't see the same effects applied that I see in the edit window. The composite is a luma traveling matte composited over a color corrected background, with a gaussian blur/line art adjustment layer ( that I found help for on this forum, thank you). But now when I try to output it, I don't get the adjustment layers. Any ideas?

Still not solved! Unfortunately a a restart did nothing....I tried that before I came on the forum. Here's a screen capture of what I see on screen [IMG]http://img104.imageshack.us/img104/4294/rubyscreencaptureft8.th.png[/IMG]
Here's the whole FCP screen
[IMG]http://img104.imageshack.us/img104/4294/rubyscreencaptureft8.th.png[/IMG]
And here's what I get when I output a still frame or a .mov self contained, even after rendering.
[IMG]http://img237.imageshack.us/img237/4724/rubyno2.th.jpg[/IMG]

How can one scape from the edit window of an appointment without saving changes?

I did move accidentally an appointment with invitees and it opened the edit windows, but I can´t escape from it without sending uselessly the changes to invitees !

mardem,
Try iCal>Edit>Undo.

How do you have the help file .chm hold its window position when the user resizes the help window.

One of my customers is complaining that the help contents will scroll out of view when the window is resized. Is there a way to anchor the position while the window is resized?

My CHM is a help file for an application. The application uses F1 to open specific topics for help. Therefore the help file needs to be visible but not cover the application to much. The Content in this situation is text however the help project contains Images, tables, text, etc.
If the user searches for the word "audio" in the search and it takes them to a section or sub topic that is half way down in the Topic, they would like that section or subtopic to stay in the same place as they resize the help window. Using Bookmarks if the topic is large enough clicking the search link will place the results in the top left of the doc view window, however this is not necessarily the top of the topic.
Im not sure how else to explain what the user is seeing, sorry.
Please explain "Also whether it remains consistent depends on whether an absolute or percentage value has been added to it."

How can you stop slideshow from resizing the browser window iframe ?

Does anyone know where the code is that causes the iweb slideshow to resize the browser window when it is opened?
When it is placed on a page using <iframe src="http://homepage.mac.com/coreydee/slideshow/index.html" width="760" height="580" scrolling="no" style="border:none;" frameborder="0"></iframe> It resizes the browser window when it starts.

Does anyone know where the code is that causes the
iweb slideshow to resize the browser window when it
is opened?
When it is placed on a page using <iframe
src="http://homepage.mac.com/coreydee/slideshow/index.
html" width="760" height="580" scrolling="no"
style="border:none;" frameborder="0"></iframe> It
resizes the browser window when it starts.
The iWeb .Mac slideshow, which you previously tried to add in an iframe, does have a function to resize the window. But it would not cause the whole window to resize, just page within the iframe so you would never know.
However, the autoviewer one you are using should not do this.

Unable to resize the Edit window in Premier Elements 11

Similar Messages

Maybe you are looking for