Unable to resolve DB adapter runtime error for setMaxRaiseSize property
I am writing files to DB in flowN activity using merge operation and getting merge operation failed error. Then I set the following 2 properties in .jca file:
<property name="setMaxRaiseSize" value="100"/>
<property name="setmaxTransactionSize" value="1000"/>
Later I found that these are inbound properties and removed from .jca file, but still I am getting the following error with reference to the property setmaxTransactionSize.
<bpelFault><faultType>0</faultType><bindingFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="summary"><summary>Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'merge' failed due to: Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "Could not instantiate InteractionSpec oracle.tip.adapter.db.DBWriteInteractionSpec due to: Cannot set JCA WSDL Property. Error while setting JCA WSDL Property. Property setMaxRaiseSize is not defined for oracle.tip.adapter.db.DBWriteInteractionSpec Please verify the spelling of the property. ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. </summary></part><part name="detail"><detail>Cannot set JCA WSDL Property. Error while setting JCA WSDL Property. Property setMaxRaiseSize is not defined for oracle.tip.adapter.db.DBWriteInteractionSpec Please verify the spelling of the property. </detail></part><part name="code"><code>null</code></part></bindingFault></bpelFault>
I dont know from where it is still referencing the property. Please help me on how to identify and resolve this error.
Thanks.
Regards
Shyam
Edited by: Shyam Patibandla on Sep 5, 2012 2:32 AM
Hi,
Please do following settings.
1. Increase the consumer threads for file adapter.
2. Increase the concurrency in receiver communication channel.
3. Set poolWaitingTime in receiver communication channel.
Refer SAP Note: 821267
Regards,
Gouri
Similar Messages
-
Unable to resolve DB adapter runtime error
I am writing files to DB in flowN activity using merge operation and getting merge operation failed error. Then I set the following 2 properties in .jca file:
<property name="setMaxRaiseSize" value="100"/>
<property name="setmaxTransactionSize" value="1000"/>
Later I found that these are inbound properties and removed from .jca file, but still I am getting the following error with reference to the property setmaxTransactionSize.
<bpelFault><faultType>0</faultType><bindingFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="summary"><summary>Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'merge' failed due to: Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "Could not instantiate InteractionSpec oracle.tip.adapter.db.DBWriteInteractionSpec due to: Cannot set JCA WSDL Property. Error while setting JCA WSDL Property. Property setmaxTransactionSize is not defined for oracle.tip.adapter.db.DBWriteInteractionSpec Please verify the spelling of the property. ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution. </summary></part><part name="detail"><detail>Cannot set JCA WSDL Property. Error while setting JCA WSDL Property. Property setmaxTransactionSize is not defined for oracle.tip.adapter.db.DBWriteInteractionSpec Please verify the spelling of the property. </detail></part><part name="code"><code>null</code></part></bindingFault></bpelFault>
I dont know from where it is still referencing the property. Please help me on how to identify and resolve this error.
Thanks.
Regards
Shyam#include"FileSystem.h"//cannot include FileSystem.h
The file is present in the projects folder of the working directory.
Still couldnt resolve intellisence error. Kindly help!
Perhaps it's getting confused because filesystem is the name of a compiler-supplied header.
https://msdn.microsoft.com/en-us/library/hh874694.aspx
What happens if you change the name of your header from filesystem.h to something else?
- Wayne -
Unable to clone File Adapter receiver channel for parallel processing
Hi Experts,
I am using variable substitution for File - RFC - File with out BPM scenario(using request response, oneway bean).
While i placed the file in the sender FTP folder, the file didnt get picked up, but in communication channel monitoring, i am getting error ' Unable to clone File Adapter receiver channel for parallel processing'.
Can anybody provide me suggestions to solve this error.
Note : without variable substitution , the interface is working good.
Is it due to, i am trying the source structure field in response file adapter?Hi,
In your CC, do you use some additional paramaters ?
like these one of point 47/48 of [Oss note 821267 - FAQ: XI 3.0 / PI 7.0/ PI 7.1 File Adapter|https://service.sap.com/sap/support/notes/821267]
Maybe there is conflict with a parallel connexion and the bean used to do asynch-synch bridge...
Mickael -
ABAP runtime error for 0CRM_OPPT_H and I while running RSA3
hello Gurus,
I'm having problems while running RSA3 transaction for these data sources.
0CRM_OPPT_H
0CRM_OPPT_I
0CRM_SALES_ACT_1
0CRM_SALES_ACT_I.
I'm getting ABAP runtime error for these.
This is the error:
Runtime Error CALL_FUNCTION_CONFLICT_TAB_TYP
Exception CX_SY_DYN_CALL_ILLEGAL_TYPE
I tried finding OSS notes for these, but I didnt succeed.
I activated the data source from RSA5, and then I tried RSA3. That time I got Errors occurred during extraction.
After that I activated delta at BWA5, then I started getting runtime error.
Even though I activated at BWA5, I am not able to see the data sources at BWA7.
Am I missing any thing please guide me through this .
Thanks
RKRThanks for your replay... All the DS and related tables are active..
But wen I tried to re-generate the DS again... this is the warning I'm getting... Any idea why I'm getting this....
The even-numbered length of the DEC field SAMPLE_QTY_ALLOW can lead to problems
<b>Message no. R8569</b>
<b>Diagnosis</b>
You want to use the field SAMPLE_QTY_ALLOW in the extract structure for DataSource 0CRM_OPPT_I. This field has a field of type 'DEC' (or 'CURR' or 'QUAN') with an even number of characters.
This can create problems since the length resulting from calculations in ABAP (for example, in extractors or Customer Exits for extraction) is too large to be inserted in the database later (PSA in BW), causing a short dump.
<b>Procedure</b>
This warning is only relevant when the maximum length of this field is exceeded during extraction, for example when the field is expanded in the Customer Exit through a calculation.
More information and a remedy can be found in SAP Note 641744.
When I search the OSS note, SAP suggesting to apply 883310 note.
In my company we are using CRM 4.0 servie pak8. SAP suggsting to install service pak 11, but my client is not interested to upgrade to 11 as CRM people are working on service pak 8.
By any chance we can use specific note which change the ABAP code to solve this problem... Please give me some suggetions...
Thanks
RKR -
Unable to resolve location alias (1023066 error) during of BR execution
Hi,
I'm using 11.1.1.3 planning classic application.
Application has been migrated from EPMA 9.3.1.
I try to use @XREF function to get data between plans of this application.
BR has been validated successful.
But I get "Unable to resolve location alias (1023066 error)" during of BR execution.
What can be a reason of this trouble?Hi ,
1. The error 1023066 is "Unable to resolve location alias" happens only when location aliase is not set in essbase matching the source server
Sandeep Reddy Enti
HCC
http://hyperionconsultancy.com/ -
When will Reader 9's Runtime error for redirected Application Data be fixed??
Has anyone heard when Adobe will fix Reader 9's Runtime error for redirected Application Data?? It's still happening with 9.1.3 for only users who have their Application Data folder redirected via Group Policy.
It's been going on for some time, as evidenced by the following link, and my own personal pain fighting this
http://forums.adobe.com/thread/391738?start=100&tstart=0Also posted here: http://forums.adobe.com/thread/391738
I haven't read through all of the posts, but the general consensus I have is that the issue is in fact related to the redir
ection of the Application Data folder. The main issue being that the use of a UNC path causes the error described, with some mention to explicit user permissions on the root of the folder path.
I was just recently made aware of this issue in our environment. Apparently we've held off upgrading to Adobe 9.x because of this issue. After a little research, it was apparent that simply modifying the default Folder Redirection policies is not possible because the use of a mapped drive is not supported.
I haven't had a chance to test this yet, and may not be able to for some time, so I thought I would share this in case someone else might be able to test. The idea being to simply use a custom ADM file to force the redirection of certain profile folders. Again, I haven't tested this using a mapped drive in the path, but I have successfully used the same settings below to redirect other folders not available by default in Group Policy.
1) Copy the text between ----- Start of ADM ------ and ----- End of ADM ------ and paste it into a text file.
2) Rename the .txt to .adm.
3) Load the ADM template into a GPO.
4) Right click "USER Custom Settings", select "View", select "Filtering" and uncheck the option "Only show policy settings that can be fully managed".
5) Configure the "Redirect Application Data" option as enabled, and enter a mapped drive path.
6) Test.
I'm interested to hear if this is a viable solution or not.
------ Start of ADM -----
CLASS USER
CATEGORY "USER Custom Settings"
CATEGORY "Folder Redirection Settings"
POLICY "Redirect My Documents"
EXPLAIN "By default files are stored as part of the
user's profile.\n\nConfigure alternative locations here."
KEYNAME
"Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders"
PART "Redirect to" EDITTEXT
VALUENAME "Personal"
MAXLEN 255
DEFAULT ""
EXPANDABLETEXT
END PART
END POLICY ; RedirectHistory
POLICY "Redirect Application Data"
KEYNAME
"Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders"
EXPLAIN "By default files are stored as part of the
user's profile.\n\nConfigure alternative locations here."
PART "Redirect to" EDITTEXT
VALUENAME "AppData"
MAXLEN 255
DEFAULT ""
EXPANDABLETEXT
END PART
END POLICY ; RedirectHistory
POLICY "Redirect Cookies"
KEYNAME
"Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders"
EXPLAIN "By default files are stored as part of the
user's profile.\n\nConfigure alternative locations here."
PART "Redirect to" EDITTEXT
VALUENAME "Cookies"
MAXLEN 255
DEFAULT ""
EXPANDABLETEXT
END PART
END POLICY ; RedirectCookies
POLICY "Redirect Favorites"
KEYNAME
"Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders"
EXPLAIN "By default files are stored as part of the
user's profile.\n\nConfigure alternative locations here."
PART "Redirect to" EDITTEXT
VALUENAME "Favorites"
MAXLEN 255
DEFAULT ""
EXPANDABLETEXT
END PART
END POLICY ; RedirectFavorites
POLICY "Redirect History"
KEYNAME
"Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders"
EXPLAIN "By default files are stored as part of the
user's profile.\n\nConfigure alternative locations here."
PART "Redirect to" EDITTEXT
VALUENAME "History"
MAXLEN 255
DEFAULT ""
EXPANDABLETEXT
END PART
END POLICY ; RedirectHistory
POLICY "Redirect Recent Documents"
KEYNAME
"Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders"
EXPLAIN "By default files are stored as part of the
user's profile.\n\nConfigure alternative locations here."
PART "Redirect to" EDITTEXT
VALUENAME "Recent"
MAXLEN 255
DEFAULT ""
EXPANDABLETEXT
END PART
END POLICY ; RedirectRecent
END CATEGORY
END CATEGORY
------ END of ADM ----- -
ABAP RunTime Error for tcode : TS01
Hi Friends,
Actually we are getting the run time error while creating the standard security transaction using TS01.
After entering the data in the first screen -- click on the enter -- enter the details inside & click on save button--then it will go run time error.
Here while calling the method, we are getting the run time error.
call method cl_class_position_op_trs=>trs_flows_calculate_tax
exporting
im_tab_flow = L_TAB_FLOWS
im_company_code = l_company_code
im_security_account = l_security_account
im_security_id = l_security_id
receiving
re_tab_flow = RE_TAB_FLOWS
exceptions
failed = 1
others = 2.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4
RAISING FAILED.
endif.
Actuallly here the problem with the class becuase the class cl_class_position_op_trs itself has error.
In the class , in the local classes they are calling again the class cl_class_position_op_trs. becasue of this reason it was going to run time error.
So we are getting the run time error.
We have OSS note for the same problem.But i am unable to implement that.
Please guide me how to implement the OSS note 751947.(Note 751947 - TRS: Syntax error due to ABAP Compiler)
please find the error details:
Runtime Errors SYNTAX_ERROR
Occurred on 03/12/2008 at 00:26:57
Syntax error in program "CL_CLASS_POSITION_OP_TRS======CP ".
What happened?
The following syntax error occurred in the program
CL_CLASS_POSITION_OP_TRS======CP :
"Components of classes declared using "CLASS CL_CLASS_POSITION_OP_TRS D"
Error in ABAP application program.
The current ABAP program "CL_CLASS_POSITION_TRS=========CP" had to be
terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
What can you do?
Please eliminate the error by performing a syntax check
(or an extended program check) on the program "CL_CLASS_POSITION_OP_TRS======CP
You can also perform the syntax check from the ABAP/4 Editor.
If the problem persists, proceed as follows:
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion date.
Error analysis
The following syntax error was found in the program
CL_CLASS_POSITION_OP_TRS======CP :
"Components of classes declared using "CLASS CL_CLASS_POSITION_OP_TRS D"
Regards.
Lakshmi
Edited by: lakshmi podile on Mar 14, 2008 8:08 AMDid you go through the steps in the note?
Use transaction SE24 to distribute the local classes into new include structures as follows:
Call transaction SE24 for the class CL_CLASS_POSITION_OP_TRS.
Select the following menu option:
Goto --> Class-local types --> Local Class Definitions/Types
Confirm the message that proposes conversion into the new structures.
Choose Utilities --> Regenerate sections from the menu.
Activate the class and all changed objects.
Try and do this, and see what happens.
Good luck. -
Portal Runtime Error for MSS Iviews
Hi all,
Though this topis has been discussed several times in our forum, i could not make anything from it.
Portal Runtime Error
<i>
An exception occurred while processing a request for :
iView : pcd:portal_content/com.ssmcehr.ssmcehr/com.ssmc.pct.ehr.mss.folder.mss/com.ssmc.pct.ehr.mss.folder.roles/com.ssmc.pct.ehr.mss.role.mss_mgrs/com.ssmc.pct.ehr.mss.workset.manager_self_service/manager_self_service/com.ssmc.pct.ehr.mss.worksets.employee_information/com.ssmc.pct.ehr.mss.page.employee_career/com.ssmc.pct.ehr.mss.iview.pay_actions
Component Name : com.sap.pct.hcm.eeprofilegenericiviewtable.default
The exception was logged. Inform your system administrator..
Exception id: 09:51_08/12/06_0067_101532150
See the details for the exception ID in the log file
<i>
<b>and the error log file ...</b>
<i>
#1.5#00142216FF7C00640000003F000022F80004240E23838D08#1165543050906#com.sap.security#sap.com/irj#com.sap.security.logToFile#Guest#19####76b39fa0865f11db815c00142216ff7c#SAPEngine_Application_Thread[impl:3]_16##0#0#Error#1#/System/Security/Audit#Plain###Guest | LOGIN.ERROR | NONE = null | | Login Method=[default], UserID=[jothi], IP Address=[137.55.161.180], Reason=[Access Denied.]#
#1.5#00142216FF7C006100000031000022F80004240E23BE4303#1165543054765#com.sap.portal.ivs.semantic.systemLandscape#sap.com/irj#com.sap.portal.ivs.semantic.systemLandscape#Guest#19####790075d0865f11dba82400142216ff7c#SAPEngine_Application_Thread[impl:3]<b>_15##0#0#Error#1#/System/Server#Java###Failed to get alias mappers sub context in the Portal Registry##</b>
<i>
This occurs only for the LDAP users,if we create user in EP(manually) it's working fine..
Thanks in Advance,
Jothi.PIt got resolved by itself after restarting the Java server.
-
ABAP runtime error for Field Symbel.
Dear Friends,
I am getting the ABAP runtime error while moving the value to field symbol, the field value is currency .
I have downloaded the data from Excel sheet into an internal table and finaly when I am passing the data to a field symbol I am getting this error, my code is like this:
MOVE l_intern-value TO <fs>.
declared the <fs> type any.
l_intern-value value is 2,100.00
the error is : "The program attempted to interpret the value "2,100.00 " as a number, but
since the value contravenes the rules for correct number formats, this was not possible."
Please let me know what is the proble at here????
Thanks,
Sridhar.Hi,
Please check your variable l_intern-value of which type as 2,100.00, in this value system is unable to recognize ',' as a numeric.
Chnage your variable type some currency field.
Thanks,
Sriram POnna. -
Runtime error for Audit Log reports
Hi,
I have activated Reports feature at Site Collection level and then tried to run custom report for Dashboard library under Audit Log Reports but I got Run Time error. I tried on my local machine and on server.
Can any body let me know how to resolve this issue to get custom report?
Any help would be appreciated.
BELOW IS THE ERROR MESSAHE:
Server Error in '/' Application
Runtime Error
Description: An application error occurred on the server. The current custom error settings for this application prevent the details of the application error from being viewed remotely (for security reasons). It could, however, be viewed
by browsers running on the local server machine.
Details: To enable the details of this specific error message to be viewable on remote machines, please create a <customErrors> tag within a "web.config" configuration file located in the root directory of the current web application.
This <customErrors> tag should then have its "mode" attribute set to "Off".
<!-- Web.Config Configuration File -->
<configuration>
<system.web>
<customErrors mode="Off"/>
</system.web>
</configuration>
Notes: The current error page you are seeing can be replaced by a custom error page by modifying the "defaultRedirect" attribute of the application's <customErrors> configuration tag to point to a custom error page URL.
<!-- Web.Config Configuration File -->
<configuration>
<system.web>
<customErrors mode="RemoteOnly" defaultRedirect="mycustompage.htm"/>
</system.web>
</configuration>
AEDLA.The audit log reporting is kind of tricky to work with...until you know what you're doing.
Some things to check: Do you have the Reporting feature enabled? Do you have auditing enabled on sites in this site collection? Have any events been triggered that would have written to the audit logs? Did you specify an output library
for the report? Will the report have any data?
Also, look at the SharePoint logs in C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\LOGS\ and let us know any "Unexpected" errors.
Bob Guidinger
Please remember to click "Propose As Answer" if a post solves your problem or "Vote As Helpful" if it was useful. -
JMS Unable to resolve 'weblogic.jms.TempDestinationFactory' error!
We are running an application within the Weblogic 7.x EJB Framework. While trying
to connect to the application from our GUI I get the following error. **... Unable
to resolve 'weblogic.jms.TempDestinationFactory' Resolved: 'weblogic.jms' Unresolved:'TempDestinationFactory'
; We have configured our JMS server with two topics - one of which is used for
persistent storage (i.e has the 'store' configuration attribute set to TRUE).
Also we have configured NO stores but a JDBC Tx DataSource.
I would appreciate any suggestions.
**see attached picture**
[confui2.jpg]
In order to use WLS JMS temporary destinations, you have to have a temporary destination template configured for
the JMS server.
Dongbo
Puneet Bhatia wrote:
> We are running an application within the Weblogic 7.x EJB Framework. While trying
> to connect to the application from our GUI I get the following error. **... Unable
> to resolve 'weblogic.jms.TempDestinationFactory' Resolved: 'weblogic.jms' Unresolved:'TempDestinationFactory'
> ; We have configured our JMS server with two topics - one of which is used for
> persistent storage (i.e has the 'store' configuration attribute set to TRUE).
> Also we have configured NO stores but a JDBC Tx DataSource.
> I would appreciate any suggestions.
>
> **see attached picture**
>
> ------------------------------------------------------------------------
> Name: confui2.jpg
> confui2.jpg Type: JPEG Image (image/pjpeg)
> Encoding: base64
-
Runtime Error for MS Visual C++ Runtime Library
First off, thanks for taking the time to read this.
When I attempt to start up iTunes, I get a message with the following info....
"Microsoft Visual C++ Runtime Library
Runtime Error!
Program: D:\Program Files\iTunes\iTunes.exe
This application has requested the Runtime to terminate it in an unusual way. Please contact the application's support team for more information."
Any assistance / advice would me much appreciated. Thanks!
- Doug
HP Pavilion a1250n Windows XP
HP Pavilion a1250n Windows XPHI,dougsoulang
i had ur problem too and know how u solve it!
just do the following steps and u can use ur itunes again:
1. go to ur windows software menu.
2. click repair at: itunes, quicktime and apple software update.
3. start => all programs => appple software update
4. install the available updates (should be itunes + quicktime)
5. be happy about being able to use itunes again -
Portal Runtime Error for WPC user
Hi experts,
I assign wpc_editor_role for my user. But he is getting Portal Runtime error everytime he try to create link list/teaser/paragraph, publish webpage, finish webpage. The error is as follows:
Portal runtime error.
An exception occurred while processing your request. Send the exception ID to your portal administrator.
Exception ID: 10:55_27/05/09_0002_21582350
Refer to the log file for details about this exception.
For your information, the WPC is working fine for administrator ID. Please help me to solve this problem.
Rgds,
Nanie ArianieNanie,
Please ensure that you have the permissions set as per this help.
[Defining Permissions in the Portal Content Studio|http://help.sap.com/saphelp_nw70/helpdata/EN/45/f91dd13c7a04aae10000000a114a6b/content.htm]
[Setting Initial Permissions for Folders|http://help.sap.com/saphelp_nw70/helpdata/EN/a6/78aa5c2ab64c1d83db59a25793e9eb/content.htm]
This should ensure that your issue is taken care of.
Good Luck.
Cheers!
Sandeep Tudumu -
Reader 9.3 produces Runtime error for all .pdf files on hard drive and email
Does anyone have a resource that can show me how to eliminate a runtime error with Reader 9.3.1, Windows XP w/ SP3 and IE7. I have recently had all .pdf files located on my hard drive and in emails refuse to open because of this message:
"Runtime Error!
Program C:\Program Files\Adobe\Reader 9.0\Reader\AcroRd32.exe
This application has requested the Runtime to terminate it in an unusual way. Please contact the application's support team for more information."
So far, I have uninstalled and reinstalled Reader 9.3 from the website; added update 9.3.1 and tried to reopen files with no success.
My organization sends a ton of .pdf files and it is not good when you can't open them for review and action.Hi All,
Although I don't normally post in forums, I thought it prudent to lay this matther to rest. I have tested the following solution:
It appears that Adobe Reader likes to check access to each parent folder as well as the actual application data folder. Apparantly there are other programs that also do similar things. As a result if you have your appdata redirected to \\server1\profiles\%username%\appdata adobe reader would first try directly access \\server1\profiles. If the user does not have to Traverse folder permission, this fails. Typically you will need to change your permissions on you profile share from:
- Users - Read Attributes (Apply to: This folder, subfolders and files)
- Users - Read Extended Attributes (Apply to: This folder, subfolders and files)
- Users - Create Folders/Append Data (Apply to: This folder, subfolders and files)
- Users - Read Permissions (Apply to: This folder, subfolders and files)
To the share permissions suggested by Microsoft in KB 274443:
- Everyone - Create Folder/Append Data (Apply onto: This Folder Only)
- Everyone - List Folder/Read Data (Apply onto: This Folder Only)
- Everyone - Read Attributes (Apply onto: This Folder Only)
- Everyone - Traverse Folder/Execute File (Apply onto: This Folder Only)
Hopefully this helps everyone. -
Runtime Error for the Picking List Smartform
Hi All,
I am working on the smartform, used for GI Scrapping for 551 Movement type. The requirement is they need DEA number for the Plant. I have written code for getting the DEA number. Iacivated the form and I want to print it using the TCODE MB02.
I get the runtime error saying UPDATE TERMINATED.I saw Dump Analysis it says CALL_FUNCTION_PARM_MISSING. It says IS_ADRC is the parameter. The ABAP program is the include program /SMB40/M07DRSON. This show the function module lf_fname with out passing the parameter IS_ADRC. How can I change the program. This is Standard program.
Thanks,Then the smart form interface in the transaction SMARTFORMS you have to remove the parameter IS_ADRC. As the calling program will not automatically add the parameters if you add it in the smartforms...
If you want the values from the table ADRC..you can write subroutines in the INITIALIZATION to get the values...
Thanks,
Naren
Maybe you are looking for
-
I am trying to run windows on a MacBook Pro using bootcamp.
Can anyone help? I am trying to run windows 7 on my MacBook Pro, 17 inch late 2011, Mac OS X Lion 10.7.5 Intel HD Graphics 3000 384 MB This what I've done I used disk utility to format a 8g flash drive in MS-DOS (FAT) format. Then I went on the micro
-
Firefox is not opening my homepage anymore which is road runner. It tells me that there is a problem with road runner, but that is not true because when I go through Explorer, my rr homepage comes up.
-
Mto strategy 40 - planned order generation problem
i have an fg, which is assigned to strategy 40. sales orders are created for that fg. however, when i run my mrp, tcode MD04 shows that the planned order generated for the FG is make to stock. how do i change this to make to order?
-
How to send mail from adobe interactive form without opening the outlook
Hello all, When the end user press the submit button i want it to send the XML data without opening the outlook or other mail application. Is there a way to do this? I tried javascript codes to send mail with UI = false but it did not work. Thank you
-
Cannot update Video Driver on Satellite L675
Hi all! I have problem i bought 675 like 7 months ago for 1099. Since it was the top "gaming" laptop and as time pass i updated my Bios. Since then everything going wrong and i updated my Bios like half year ago after 1 month when i bought laptop. Li