Unable to resolve error while creating a maintenance project for SMD

Hi,
I am getting an error when I try to create a maintenance project for SMD 331- SMD 341 - SMD 351 systems.
( SMD 331- Development, SMD 341- Test, SMD 351- Production ) SMD is 4.0 upgraded system.
Detailed description of the problem:
In SOLAR_PROJECT_ADMIN, I select a newly created project
GS_SMD3513 and in tab 'System Landscape', go to tab 'Change Requests', here when I do consistency check
I get following errors
1. 'No consolidation system found for SMD-331 (project GS_SMD3513)'
2. Message from function module /TMWFLOW/CHECK_PRJ_CONS: No export system for SMD-351
3. Error reading information for number range object /TMWFLOW/D
The transport route between SMD331- SMD341- SMD351 is available as any transport request created in SMD 331 can be successfully imported to SMD 341 and SMD 351.
I need help to resolve these errors.
Edited by: Dipti Sawarkar on Jan 7, 2008 6:41 AM

Hi Patmol,
Have you tried to go to the previous or next timesheet and then navigate with the "previous period" or "next period" to the timesheet in question.
Also have you tried to open it using a delegation session?
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS |

Similar Messages

Error while creating table maintenance generator

Hi,
I am getting below error while creating table maintenance generator.
Screen SAPLZtest 0002 could not be generated. In DYNPFIELD_ATTR field LENGTH has the invalid value 241.
Reason for that error might be:
In the table I have a field with a dataelement(customized) of type Char and length 241.
But in the other table Iam using the standard data element(standard) of same type(241 char).In this table Iam able to create table maintenance generator without any errors.
And the domain Iam using is same for both the tables.
Please help me to solve this.
Thanks in advance,
Sravanthi

Hi,
you can go to transaction se51 and go your screen. active it.. you can find thesolution.
refer these links..
Error in table control
Error while creating table maintainence generator !
Thanks and Regards,
Ahamed.

Appbuilder- Error while creating a cordova project.

Hi all,
I am getting an error "invalid no of parameter" while create a cordova project for a superList(name SAP_Superlist), but showing successfully created message aswell. Due to the error cordova project is not getting created in the workspace path mentioned in the setting.
but i went mannually to the 'D:\install\SMP SDK\SDK\appbuilder-1.0.1245\ares-roject\hermes\filesystem\root\guest\SAP_Superlist\packages\temp'
and started create project. SAP_Superlist folder is getting created but getting the below errors again. I guess both of errors are same.
Could you please help me in getting this resolved.
Noufal

Have you installed node, Apache ANT and Cordova. To make sure you installed Cordova properly and it is working, you can try creating a cordova project using cordova commands as give below:
Use the command cordova -d create C:\Kapsel_Projects\LogonDemo com.opensap.myfirst to create a new project.
Add the android platform to the project using the below command
cordova -d platform add android
Midhun VP

Error while creating web dynpro project from DTR

Hello,
I am getting following error while creating Web Dynpro project from DTR,
org.eclipse.jdt.core.JavaModelException: File /<track name><DC><package>/.classpath is read-only.
Still project gets created but evenif I check out view , it does not allow me to edit it.
Also I have checked in and activated some changes but active copy in DTR is not reflecting those changes.
I tried Add subtree option in DTR perspective for folders in this project. Is it result of that?
Please help me in this regard.
Thank You
Beena

Hi Beena,
.classpath file should not checked in to DTR(uncheck the Read only properties). It is local file it contains class path for local system.
Generally in webdynpro project only src folder should be checked in DTR.
Regards
Suresh

Error while creating inter-company invoice for stock transport

Hi ,
I am facing following errors while creating inter-company invoice for STO order.
We have scenario where standard PO is created in company code A & then replenishment delivery is created in company code B.While raising inter-company invoice to company code A, we are facing problem.
In replenishment delivery we have 10 line items. But when we try to do inter company invoice through VF01/VF04 we get following log
XXXXXXXXXX(delivery Number) 000000 Customer XXXXX: Customer master table KNVV is missing (VF-022)
XXXXXXXXXX (delivery Number)000010 The bill-to party could not be determined (VF-047)
XXXXXXXXXX (delivery Number)000010 The payer could not be determined (VF-048)
With this first line item from delivery is not flows to invoice & if we saves this invoice then it is get saved with account determination error as some of the data does not comes into invoice header like account assignment group for customer, Payment term, destination country,region, tax classification for customer etc. That means invoice gets created without first line item from delivery with account determination error & so,no accounting document gets generated.
I checked customer master for all SP,SH,BP,PY they are correctly maintained.This was working fine few months back, but not working now.
If anybody had come across such kind of scenario, your valuable inputs will be highly appreciated.
Thanks & kind regards,
Ganesh Palatshaha

Hello
Kindly check the sales area of customer involved, whether the customer maintain with sales area for STO.
If that is note the case the refer following link:
- Error VF 047 & 048 while creating Inter company billing
Regards
JP

Error while creating table 'EDISEGMENT' entry for Transfer Structures

Hi Guyz...
I've been facing a few issues regarding activation of transfer structures.
I'll explain the whole process...so it makes sense to you guys.
I've initially activated the Transfer Structures in BI Content for Master Data. Later on we faced some issues in the DEV server. So we had to transport all the objects and store them locally on a temporary location. When the BI DEV sever, was up and running, we transported all the objects back to the server.
Now while moving the objects back to the sever. We had an errors in the Master Data Request (Log- Method Execution). After going into the log...this is what I found.
Error while creating table 'EDISEGMENT' entry '/BIC/CIIA0DIVISION_TEXT'
Error while creating table 'EDISEGMENT' entry '/BIC/CIIA0DISTR_CHAN_TEXT'
Error while creating table 'EDISEGMENT' entry '/BIC/CIIA0MATL_TYPE_TEXT'
Error while creating table 'EDISEGMENT' entry '/BIC/CIIA0SALESORG_TEXT'
Error while creating table 'EDISEGMENT' entry '/BIC/CIIA0SALES_GRP_TEXT'
I hope, I am clear here.
Any suggestions, guys...
Thanks,
Regards,
G

Hi,
Please check this link:
Error while creating table EDISEGMENT entry
Hope it helps.
Thanks and Regards,
MuraliManohar.

Error while create TSW ticket processing for DES Scenario

Hi Experts ,
I am facing an error while doing TSW - ticketing process for DES scenario
For STO creation under movement type O - Origin T - Transfer.An error is coming while actualizing the ticket
Error states : " you do not have authority to access the shipment ( Return code 4)
Request all experts to look into the issue and kindly reply
Thanks in Advance

Hi,
Error states : " you do not have authority to access the shipment ( Return code 4)
It seems authorization problem,kindly take help of basis team for authorization
kapil

Error while creating a system object for R3 in portal

Hi,
I am getting error while trying to create a system object in portal.
Following are the details I used :
Under WAS...
Web AS Host Name :<XXXX>:8001
Web AS path: /sap/bc/bsp/sap/
Web AS protocol : http
Under User management:
Authentication Ticket Type : SAP Logon Ticket
Logon Method :SAPLOGONTICKET
User Mapping Type : admin,user
Under Connector:
SAP Client : <Client NO>
SAP System ID : <System ID>
SAP System No : <System No>
System Type : SAP_R3
While trying with connection test... I am getting like this:
SAP Web AS Connection
Test Details:
The test consists of the following steps:
1. Checks the validity of system ID in the system object.
2. Checks if the system can be retrieved from the PCD.
3. Check whether a SAP system is defined in the system object
4. Validate the following parameters: WAS protocol; WAS host name
5. Checks if the host name of the server can be resolved.
6. Pings the server to see if it is alive.
7. Pings the WAS ping service; works only if the service is activated on the ABAP WAS.
8. Checks HTTP/S connectivity to the defined back-end application
Results
1. The system ID is valid
2. The system was retrieved.
3. The system object represents an SAP system
4. The following parameters are valid: Web AS Protocol (http) Web AS Host Name (<FQDN server name>:8001)
5. The host name <FQDN Server Name> was resolved successfully.
6. The server sapdwh01 could not be pinged successfully.
Test Connection with Connector
Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the backend application using the connector defined in this system object
Results
Retrieval of default alias successful
Connection failed. Make sure that Single Sign-On is configured correctly
It seems that the portal is not able to ping to R3 system. I tried to ping to R3 server from portal server by command prompt. I am able to ping. Also under SICF, I can see ping service as in activated state.
Kindly help.
Regards,
Niraj
Edited by: Niraj Kumar on Dec 11, 2008 10:41 AM

I created a SAP Transactional iView for transaction SE80.
Also, I tried from under System Administration -> Support -> SAP Transaction. It is not working.
Got portal Runtime error :
Portal Runtime Error
An exception occurred while processing your request
Exception id: 12:57_11/12/08_0003_2795650
See the details for the exception ID in the log file.
Regards,
Niraj

Giving error while creating a sales contact for the previous year (2008)

Hi Friends,
We are currently with SP12. When we try to create a sales contract for the previous year it is giving error like "Schedule line is for the item 100 cannot be after the order's latest delivery date".
i tried debugging and found that that there is a rule created for this (in SP12). I commented the rule and tried to create a contract but, again got an error "Error while saving". This error I can't catch while debugging.
I even didn't find where the schedule line date and header cancel dates are set so that I can change the dates manually.
If any one has any idea, kindly help me.
Best regards,
Swarna Seeta

Hi Wolfhard,
Thanks for the reply.
You are right and I have uncommented the line which assigns true to the return value and the contract got saved now.
Thank you so much.
I just want to know whether commeting this rule effects any of the functionalities of the sales contract.
Best regards,
Swarna Seeta

Error while creating JDBC connection pool for MSSQL database

Hi,
From my windows m/c, I am trying to configure a connection pool to connect to
an MSSQL database on another m/c. While setting the targets, i get the error :-
<Mar 11, 2004 6:17:52 PM GMT+08:00> <Error> <JDBC> <Cannot startup connection
pool "gcdb_connpool" Cannot load driver class: com.microsoft.jdbc.sqlserver.SQLServerDriver>
I have added the path of the jars for the driver in the classpath.
Any help would be appreciated.
Thanks.

Hi. Read the weblogic startup script, and follow how it creates
a classpath argument for the server. You must get the driver jars
into that classpath.
Joe
Neha wrote:
Hi,
From my windows m/c, I am trying to configure a connection pool to connect to
an MSSQL database on another m/c. While setting the targets, i get the error :-
<Mar 11, 2004 6:17:52 PM GMT+08:00> <Error> <JDBC> <Cannot startup connection
pool "gcdb_connpool" Cannot load driver class: com.microsoft.jdbc.sqlserver.SQLServerDriver>
I have added the path of the jars for the driver in the classpath.
Any help would be appreciated.
Thanks.

Error while creating connectionpool in oc4j for

sqlserver2000
I am trying to create a connection pool for sqlserver2000
database using oc4j enterprise manager 8888 I got the
following error
Please suggest me a way to create a connection pool for
sqlserver2000

An error has occurred.
Unable to create :
com.microsoft.jdbcx.sqlserver.SQLServerDataSourceFactory
Missing class:
com.microsoft.jdbcx.sqlserver.SQLServerDataSourceFactory
Dependent class: oracle.oc4j.sql.config.DataSourceConfigUtils
Loader: oc4j:10.1.3 Code-Source:
/D:/JDeveloper/j2ee/home/lib/oc4j-internal.jar Configuration: in
META-INF/boot.xml in D:\JDeveloper\j2ee\home\oc4j.jar This load
was initiated at ascontrol.web.ascontrol:0.0.0 using the
Class.forName() method. The missing class is available from the
following locations: 1. Code-Source:
/D:/JDeveloper/j2ee/home/shared-lib/SQLServer2000Libraries/1/mss
qlserver.jar (from in
/D:/JDeveloper/j2ee/home/config/server.xml) This code-source is
available in loader SQLServer2000Libraries:1. This
shared-library can be imported by the "ascontrol" application.


What has this to do with forms?
Ah, I see you have posted this in every forum possible.

Error while creating connectionpool in oc4j for sqlserver2000

I am trying to create a connection pool for sqlserver2000 database using ,oc4j enterprise manager 8888 I got the following error
Please suggest me a way to create a connection pool for sqlserver2000

An error has occurred.
Unable to create : com.microsoft.jdbcx.sqlserver.SQLServerDataSourceFactory
Missing class: com.microsoft.jdbcx.sqlserver.SQLServerDataSourceFactory Dependent class: oracle.oc4j.sql.config.DataSourceConfigUtils Loader: oc4j:10.1.3 Code-Source: /D:/JDeveloper/j2ee/home/lib/oc4j-internal.jar Configuration: in META-INF/boot.xml in D:\JDeveloper\j2ee\home\oc4j.jar This load was initiated at ascontrol.web.ascontrol:0.0.0 using the Class.forName() method. The missing class is available from the following locations: 1. Code-Source: /D:/JDeveloper/j2ee/home/shared-lib/SQLServer2000Libraries/1/mssqlserver.jar (from in /D:/JDeveloper/j2ee/home/config/server.xml) This code-source is available in loader SQLServer2000Libraries:1. This shared-library can be imported by the "ascontrol" application.


What has this to do with forms?
Ah, I see you have posted this in every forum possible.

Error: while creating Service Entry Sheet - for HELD PO

Hi experts,
While PO XXXXXXXXXX is in the status of Hold. System allowed me to create & delete a service entry sheet(SES) on particular date.
Another day i tried to create SES for the same PO. System is not allowing me to create SES and it gives me error as 'Purchase order XXXXXXXXXX incomplete (parked)'.
While debugging I found that ekko-memory field set to 'X'. At this point I am getting error.
My question is why the system is allowed me to create SES for a PO which is in HELD status?.
Please help me.
Thanks In advance,
Vinod

Thanks for the reply.
We are aware that system will not allow to create Service entry sheet for held po. But it is allowed me to create on a particular date. Another day i tried to create/delete a SES for the same PO or new PO(held status) system is not allowing me to delete/create SES.
Please help me what might be the reason which allowed me on a particulare date.
Thanks in Advance,
Vinod....

Error while Creating Prestage Content File for Application in SCCM 2012

Hi All,
I am using SCCM 2012 SP1 on Win 2K8 SP R2 box. Database is SQL 2008 R2 SP1 CU6. I have trying to create Prestaged content for Applications for extracting pkgx files on DP's. I am getting the below error message for random applications(not for all applications
but for random applications).
Content that will be included into the prestaged content file (1):
Citrix Receiver 13.3.0.55
Export all dependencies: 'Yes'
Selected distribution points: 'MPSERVER.GS.WORLD.PRESS.COM'
Prestaged content file: 'G:\pkgxfiles\Application\Citrix Receiver 13.3.0.55.pkgx'
　Error: Distribution is currently in progress for selected packages: HM0000D9. Please wait and try again
But if I see this application is successfully distributed to 2 of the distributions points long ago. If I reupdate the Distribution point and then again try to create prestaged content for this application then pkgx file for that application is getting
created.
Why this is happening and how can I resolve this?
Thanks & Regards Uttam

Since no one has answer this post, I recommend opening a support case with CSS as they can work with you to solve this problem.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Error while Creating a Sales Order for a Configurable Material

Dear Members,
When I am creating a Sales Order for a Material. After Entering the Sold to Party and Material(Variant Configuration) I am getting an error in popup that Derivatiion Rule not defined for the Country IN. Please can you help me out regarding the settings for this.
Thanks,
Farhan.

It seems your issue relates to some non assignment in COPA settings. Hence, check this help link and I hope this will be helpful to you
[Source and Target Fields |http://help.sap.com/saphelp_erp2004/helpdata/en/59/65a2b8dd1711d2a6110060087a7a87/frameset.htm]
thanks
G. Lakshmipathi

Unable to resolve error while creating a maintenance project for SMD

Similar Messages

Maybe you are looking for