Unable to resolve UserID for Henryk Uluszczak. User will not be synchroniz
Can you tell me what's that error. What is the reason for this.
System ver webtools 6 SP01
Hi Lucasz,
You have selected email address to be used as the userid in the synch manager and this contact has none.
Either that or no value found in web tools userid UDF
What is the B1 Contact Synch set to on the Settings page of the Synch manager?
Similar Messages
-
This pops up when exporting in iMovie "Unable to prepare project for publishing: The project could not be prepared for publishing because an error occurred. (ParamErr: error in user parameter list)" I have turned off my Time Machine in terminal yet it remains. What do I do, I need your help PLEASE.
Hi
Error -50 paramErr Error in user parameter list
Can there be any external hard disks - if so How is/are it/they formatted ? Must be Mac OS Extended (hfs) if used for Video.
UNIX/DOS/FAT32/Mac OS Exchange - works for most but not for VIDEO.
What this means in Your situation is above me.
• free space on internal boot hard disk? How much ?
Video codec
• streamingDV, AIC etc. (not .avi, .mp4, .m4v, .wmv etc as they are containers not codecs)
Pictures
• in what format ? .jpg, .bmp, .tif, else ?
Audio
• from where/what format ? iTunes, .avi, .mp3, .aiff, else ?
The "com.apple.iMovie.plist" file
Many users has not observed that there are TWO libraries.
• Library - at root level
• Library - in user/account folder - THIS IS THE ONE to look into
from Luke Burns
I fixed the problem.. but it was very, very strange. I had a very long section for credits and set the line spacing to 1.0.. for some reason this caused it. I removed it, and it worked fine. I put it back, and I couldn't preview or play the video.
I don't know why that could cause that big of a problem, but it did..
Klaus1
You need more free space on your hard drive.
jonorparkerjon
After phone support from apple I ended up creating a new project and adding all 117 clips back in individually till I found out what clips flagged and would not allow me to export. I had 3 I deleted and replaced and everything works now 1hr after tedious work....
Where do Your material come from
• Camera
• External hard disk
• USB-memory
And all are connected so that iMovie can find it ?
Yours Bengt W -
Unable to prepare project for publishing
The project could not be prepared for publishing because an error occurred. (Error in user parameter list)
How do I fix this???
I have downloaded my family movies captured on Hi8 video through a Dazzle hollywood DV-bridge to the iMac. Everything went well until I tried to finalize the project.I'm having the same problem.
When I export (and I want HD quality) I get the error message that
Unable to prepare project for publishing The project could not be prepared for publishing because an error occurred. (Error in user parameter list)
How do I free up more space on my startup disk? My hard drive has 158.61 GB free. Do I need to free up more space? -
The 'c' XUSER key for the DBM user does not exist or could not be identified
Hello members,
I am getting this message 'The 'c' XUSER key for the DBM user does not exist or could not be identified' in SUM preparation phase while upgrading SOLMAN from 7.01 to 7.1
Does anyone has any idea on this. What steps need to be followed for this.
My DB is MaxDB.
Thanks,
SrikanthHello,
Figured out the problem. Actually SAP System was moved from actual server to Virtual machine on the server. In this process some of the DB configuration got corrupted. And this activity was done by one of our previous employee.
Since this was a standalone system, I took backup of all current configuration and uninstalled SAP and installed new Solman 7.1 SPS12. Issue is resolved now.
Best Regards,
Srikanth
Solman Upgrade from 7.01 to 7.1 stuck in Extraction-PREP_EXTRACT/BEGIN_PRE phase -
Get this message when I try to publish my iMovie project. "unable to prepare project for publishing the project could not be prepared for publishing because an error occurred. (file already open with write permission)"
See the discussion here:
https://discussions.apple.com/message/16784714#16784714 -
I am trying to send an iMovie project to iDVD and I keep getting the following error msg. "Unable to prepare subject for publishing: The project could not be prepared for publishing because an error occurred. (-43)"
Check out this thread: https://discussions.apple.com/thread/1421870
It may mean you either your Event or your Project. Have you moved any of the files in the Finder by any chance? That error may come up if you moved anything outside of iMovie. Do you get an error message when you choose Share>Export to iMovie (choose medium size) and save it to the Desktop? If you can export it to the desktop, you can pull that file into iDVD separately and still make it work. -
I have an imovie project that is less than 20 minutes long. i tried to publish it a couple of times and it seemed like it was finished but it never published. i tried one more time and got an error message saying "unable to prepare project for publishing. the project could not be prepared for publishing because an error occurred. (project is too long)". i know the project isnt too long. i am trying again but the error message only comes up after i waited 2 hours for it to finish publishing. PLEASE HELP
oh and ive tried publishing to almost everything. straight to idvd, to media browser, i tried both hd qualities and also the large quality. no luck with any of those
-
Lightroom was unable to prepare the selected file at
/Volumes/Portable C/Kite Skating nikon/_DHT9654.NEF for editing.
It will not be opened.
what does this mean? can anyone help?Yes it is on a portable drive yet I have already worked with it and exported it as a jpg. The problem arises whenever I try to edit in the plug-ins from Nik software...this just happened recently as it never happened before...for years?
-
Requestors end users will not acces a site directly and add list items
Hi
i created a site for IT services and this site includes some lists for various services
http://Intranet.com/Units/IT services
main site is http://Intranet.com
and also workflow are configured for these lists for create new item
and only 3 type of users will work on these lists
1)Requestors (Create,View rights)
2)Contributers (Contribute permissions)
3)Approvers
Scenario:
-- Requestors will create list items and approvers will Open this list item and edit list item like
approve and add a Contribute userid in AssignedTO field
---Contribute user also will recieve email and he also Open item and edit ans save this list
so basically its backend , data inserted by requestors will save in lists
so here i need all Requestors end users will not acces IT services site and add list item directly in list.
is any other option availabe that i will provide a diffrent front end page for Requestors at root level site (which is Intranet.com )
and they will add and view only their data, and Contributers also view and edit all users data.
adilHi adilahmed,
You can use two web parts to show the list items for different group.
In the List view page, add another list view web part, set the first web part list view to filter Created By field with Me, second list with all list items.
Then set the first web part with audience Requested group, and second web part with audience Contributers group.
Thanks,
Qiao Wei
TechNet Community Support -
How do I get recover disc for vista when system will not boot???? For Pavilion pc a6157c
Pavilion pc a6157c How do I get recover disc for vista when system will not boot????
Read THIS HP Support Document concerning ordering recovery discs for your HP a6157c. Go to THIS HP webpage to order the "Vista Home Premium 32bit 73NAv3PrA1 + Supp 4 Recovery Kit" for your computer. If you are not looking to order the recovery discs or have some other issue with your computer, please provide detailed information concerning the problem.
Frank
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240 -
My ipad says it is connected to WiFi, which is workingly perfectly for several other devices, will not connect to internet. It keeps giving the message 'Cannot Connect' or error has occurred or just blink off site or icon?
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
Why when I connect to iTunes store for app updates it will not cone t keep getting error messagr
Why when I connect to iTunes store for app updates it will not cone t keep getting error messagr
The Complete Guide to Using the iTunes Store
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
iTunes Store: Associating a device or computer to your Apple ID
http://support.apple.com/kb/ht4627
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
iOS: Changing the signed-in iTunes Store Apple ID account
http://support.apple.com/kb/ht1311
Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
This works for some users. Not sure why.
Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
Cheers, Tom -
I have an old iphone 3G that I want to use as an ipod touch. It does have a sim card in it and it has been reset. For some reason it will not pick up my wireless network in my house, or any other wireless network. What could be the problem?
Is this the problem:
iOS: Wi-Fi or Bluetooth settings grayed out or dim -
My ipod will not connect to my home wifi, it can see it and asks for a password but will not connect. I have tried it at another location and it will connect to other wifi connections. I have another ipod that is connecting just fine to my home wifi.
- Reset the iPod. nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections -
How can I burn a copy of my project to a DVD . I do not have IDVD because I have the Lion OS. I did purchase Wondershare for burning but it will not load the iMovie events or projects
There is no proper substitute for iDVD.
Why is there no iDVD on my new Mac?
https://discussions.apple.com/docs/DOC-3673
UPDATE & ADDENDUM:
But even though you can still buy iLife 11 that includes iDVD 7 from Amazon, Apple now make it difficult to install:
Poster jhb21939 posted this in another thread:
“when I attempted to load iDVD into a new iMac. A notice came up on the screen stating that the 'Authorisation Licence' had expired on 25 March this year (2012).
I contacted the Apple support team and eventually, I was told that the Licence had been withdrawn and could no longer be used.”
In other words Apple are now so adamant that we don’t use iDVD that they have tried to make it impossible to install.
In response, Old Toad posted this solution:
“You can still use it one all of your Macs. If you get an invalid certificate message just set your Mac's clock to sometime before early 2011 and run the installer. After you're done reset the time back to the correct time.” He added this comment:
“It began after iDVD and iWeb were discontued and they were dropped from the Apple Store. All I can think of is the certificate was set to expire after a certain time period after the intitial iLife disc was released.
I've been able to use the installer even without setting back the date. I just clicked on the Continue button and it would work as expected. For some it would not continue unless the date was set back.”
The latest anorexic iMacs just announced do not even include a CD drive! Proof positive that Apple virtually prohibit the use of DVDs - although the newly announced Mac Minis do include a Superdrive.
Yet, they still include iMovie! Heaven alone knows or understands what you are supposed to do with your newly edited masterpiece - except make a low quality version for YouTube?
Maybe you are looking for
-
Error calling web service from another web service
I get the following deployment error: BUILD FAILED /home/appgcelc/DS_028/Receive/XMLReceiveService/build.xml:170: Deploy error: Ope ration failed with error: Error compiling :/u10/app/gcelc/ora/appserver10131/j2ee/home/applications/XMLRe ceiveService
-
ITunes 10.6.1, resize window problem
I know this has been asked before, for earlier versions of iTunes, but I can't find a satisfactory answer. Just changed my 24" white iMac (running SL) to a 21.5" iMac with Lion and iTunes 10.6.1. With iTunes, it seems I have only 2 options: Full scre
-
How can can i subtract the value of the column in each row ?
I want to subtract the value of the column in each row if the row is not enough then continue to next row. For example ID QTY A 20 B 40 C 60 I want to update this table by subtract the
-
hello, is thera any bapi to chnage customer , iam having the input as customer number only and i need to change the attributes which comes in extr-> additional data menu path cheers
-
SD card blank or has unsupported filesystem error Help!?!?!
While taking pics yesterday I got a notification that stated "Blank SD card (SD card blank or has unsupported filesystem)". This SD card is in my Motorola Droid X (which I have only had for 8mnths). I am not able to take pics, lost all photos and mu