Unable to restart after restore iphone 4S

Hi after now being able to restore factory settings on my iphone 4s earlier today as i had problem with my phone not working.
I have restored factory settings 3 times now and reloaded my phone from itunes backup.
It stops when it has finished and the computer says it is all done butit stays with the apple logo and the solid bar underneath.
I have also tried to start it up from recovery mode each time,after waiting at least ten minutes,but all i have now is the apple logo.
Very frustrating, itunes recognises device but I am going round in circles. Please help before i throw it out of the window!!!!

Hi after now being able to restore factory settings on my iphone 4s earlier today as i had problem with my phone not working.
I have restored factory settings 3 times now and reloaded my phone from itunes backup.
It stops when it has finished and the computer says it is all done butit stays with the apple logo and the solid bar underneath.
I have also tried to start it up from recovery mode each time,after waiting at least ten minutes,but all i have now is the apple logo.
Very frustrating, itunes recognises device but I am going round in circles. Please help before i throw it out of the window!!!!

Similar Messages

  • I just updated my iphone to ios7 and I keep getting stuck at the 'Set up your iPhone' screen. I click 'Restore from Itunes Backup', but it only ends up restarting after restoring and fails to get past the 'Set up your iPhone' screen. Any ideas?

    I just updated my iphone to ios7 and I keep getting stuck at the 'Set up your iPhone' screen. I click 'Restore from Itunes Backup', but it only ends up restarting after restoring and fails to get past the 'Set up your iPhone' screen. Any ideas?

    Normally, I would suggest restoring the iPad and uninstall and reinstall iTunes but you have done both of those things - more times than you ever imagined!
    Have you thought about turning auto syncing off?
    Without connecting your iPad to your laptop, start iTunes. Click on Edit. Click on Preferences. Click on Devices. Check the box next to "Prevent your iPod etc. from automatically syncing." Click OK.
    If you do this you can backup the iPad right away before it syncs. You may want to go into all of the iTunes tabs and just make sure that all of the current content on the iPad is selected to sync before you actually do sync.
    This doesn't solve the problem, but it would prevent the automatic sync and erasing content. Hopefully, in the next few days- when iOS 5 is released - you will also be relieved of this weird iPad behavior - since the iOS devices are supposed to become PC free.
    BTW - and this is no excuse for what you are experiencing, but I have found that some of the game apps that I had on my iPad turned out to be quite troublesome and after I removed them, my problems went away. I know that is almost sacrilege with regard to the Angry Birds addiction .... But I'm just saying ...

  • Help solve the problem after restor iphone 5 ios 7 asks email

    Help solve the problem after restor iphone 5 ios 7 asks apple ID
    I Forgot apple ID

    Only one way- to remember it. There is no way around cause it is a new security feature. Better stress your memory.

  • After restoring iPhone 4, iTunes is telling me that my SIM card is not supported. It is the same SIM I have always used with this phone.

    After restoring iPhone 4, iTunes is telling me that my SIM card is not supported. It is the same SIM I have always used with this phone. What action can I take to convince phone that the SIM card is OK?

    Hello again, update time.
    Finally got to speak to a senior technical advisor at Apple today who was most confused until he back-tracked and double checked all the basics. He then realised that the actual serial number of my original phone (from the proof of purchase I sent him) was different to the one that they had recorded when they made the swap. I think he said it was out by one character and was actually showing as a mobile connected to AT&T (from the States). He said that the replacement phone was then set-up as per the serial number they had typoed into their system as locked to AT&T. The genius who did the swap at Apple Doncaster must have placed an unlock on it at the time in order for my 3 SIM to work at all. Therefore when I restored it, it returned to the settings of the incorrect original phone serial number!
    So... Apple tech advisor said he can rectify the records and re-set the factory setting to an Australian iPhone on the 3 network within 12-24 hours. Fingers crossed all is good by tomorrow afternoon.
    Thanks for your suggestions though, I had been trying everything to get it to work as I'm sure you know how hard they are to live without once you've got used to living with one!
    Cheers, Tom.

  • HT201407 iPhone unable to activate after restore

    Hi,
    I have just restored my old iPhone 3GS 8GB (without a sim card in it) as I was going to sell it. However after restoring it via iTunes a message appears "we are unable to continue with your activation at this time. Please try again later, or contact customer care"
    I have tried it several times but get the same message, any ideas?
    Thanks

    iPhones require a SIM for activation.
    If the device still will not activate, this is typically the result of a device that has been hacked or jailbroken.  If that is the case, no support can be provided here.

  • Unable to restart after software update 10.3.1.1779

    I am unable to get  my Z10 to restart after this update.
    I have searched endless avenues and have now resorted to deleteing the notifcations for this update when they come in, I have downloaded and installed it, but when asked to restart, my phone stalls on the loading screen forever, the longest I have waited for it to restart is 3 days, with 24 hours of that on 99%.
    I am now the but of all phone related jokes as everyone I know has an IPHONE that works perfectly, but I insist on keeping this awful Z10 becuse I dont want to join their rank....too tink I spent £500 on this when it came out (more fool me)
    It would seem that the general consensus is, I will have to go to the inconveience of taking my Z10 in to a phone shop, were they will send it off to BB for the update to be installed.
    PS; Blacberry's forum is as hard to navigate as the phone is to actually get working proberly.

    This has been the worst software update I have ever encountered. My Q10 is completely unreliable and I am going to switch to another device in the morning. I have restored factory settings and have successfully wiped the app to sync my shared Google Calendars, the z and y keys have swapped on my keypad and the Q10 still turns itself off arbitrarily, wipes all text and phone messages and can't recall what network I'm on or what my home wifi settings are.

  • Never ending restart after restore from 1.1.4 to 2.0.2

    restored it because i didn't want any of the music on it. so after restore completed it said restarting iphone, and it never restarted, so i soft restarted the phone, the lock and home button restart. and it ended up in a loop about every minute it restarts. so after that i restored it to 2.0.2 again, same problem dosnt restart its self. tried to restore to 1.1.4 got some error 20? so tried again with the 2.0.2 and same problem.. any one have the issue and fix it? i am probbably going to have to take a bus to san jose to the apple store

    Why didn't you just unsync the music off the phone? Doing a restore to get music off seems a little much.

  • Can't send and receive SMS/MMS/iMessages after restoring iPhone from a backup

    I can't receive and send any type of messages with my iPhone 3GS (iOS 6.1.6) after restoring it from my old backup (also 6.1.6).
    Messages that I'm sending are disappearing immediately after the moment they are sent and they are never delivered. The first time I restored my iPhone I could send and receive messages for 1 day, and I couldn't do it on the next day. This time I was able to send and receive messages for 10 minutes.
    I have used the methods Apple recommends for problems like this, but it doesn't help.

    Hello StepanyanMuradyan,
    Thanks for using Apple Support Communities.
    To troubleshoot issues with not being able to send or receive messages on your iPhone, I'd like you to please follow the troubleshooting outlined below.
    To resolve issues with sending and receiving iMessages, follow these steps
    Check iMessage system status for current service issues.
    Go to Settings > Messages > Send & Receive and make sure that you registered iMessage with your phone number or Apple ID and that you selected iMessage for use. If the phone number or Apple ID isn't available for use, troubleshoot iMessage registration.
    Open Safari and navigate to www.apple.com to verify data connectivity. If a data connection isn't available, troubleshoot cellular data or a Wi-Fi connection.
    iMessage over cellular data might not be available while you're on a call. Only 3G and faster GSM networks support simultaneous data and voice calls. Learn which network your phone supports. If your network doesn't support simultaneous data and voice calls, go to Settings > Wi-Fi and turn Wi-Fi on to use iMessage while you're on a call.
    Restart your device.
    Tap Settings > General > Reset > Reset Network Settings on your iPhone.
    If you still can't send or receive an iMessage, follow these steps
    Make sure that the contact trying to message you isn't blocked in Settings > Messages > Blocked.
    Make sure that the contact you're trying to send a message to is registered with iMessage.
    If the issue occurs with a specific contact or contacts, back up or forward important messages and delete your current messaging threads with the contact. Create a new message to the contact and try again.
    If the issue occurs with a specific contact or contacts, delete and recreate the contact in the Contacts app. Create a new message to the newly created contact and try again.
    Back up and restore your device as new.
    iOS: Troubleshooting Messages - Apple Support
    Take care,
    Alex H.

  • Unable to update or restore iphone 4

    While attempting to update to ios 5 my iPhone 4 has completely bricked - please help!
    OK, in order.....
    I downloaded iOS 5.something manually via iTunes and then attempted to install on my iPhone.
    During this it threw up an error code - 4 i think.
    Tried several times with no luck so decided to update iTunes to latest version (as advised).
    During installation it seemed to have some problems with device support but (i think) this finally worked.
    Fired up iTunes and plugged in iPhone.
    I'm then told that i need to restore it so dulyhit the button.
    iTunes then stalls for around 10 minutes while "preparing iPhone for restore".
    Then "Restoring iPhone Software" starts.
    Progress bar then stops and i'm told that an unknown error (14) has occured.
    I now basically have no an unusable phone!
    I've now been at it for approximately 4 hours, i've uninstalled/reinstalled iTunes, restarted my PC and gone through the restore proccess many times with no luck!
    Anyone got any advice?

    You could always try restoring and updating on another user account on your computer or on a totally different computer that has iTunes installed on it.

  • Retrieving paid applications after restoring iphone

    hi
    while updating my iphone to to the latest software, it encounter an error & i had to restore the phone. had installed some applications & purchased a game but all wiped out after restoring... how do i get the paid game application (cooking mama) loaded to my phone... i hope i dont have to pay for it again cos i've not even had the chance to play with it. my iphone is just 2 days old & i cant understand why error occurs while updating to latest software version. some one pls help.
    thanks

    Once you purchase an App it's yours, you can re-download it as many times as you like w/o being charged. To prevent this in the future you should transfer purchases from your phone to iTunes so there's a backup for you.

  • Waiting for Activation message appears after restoring iPhone.

    Hello!
    I recently restored my iPhone and now it will not connect to any network towers. It keeps saying that I have no service when I usually always do. And it only allows me to connect to wifi. Any suggestions on what to do?

        Jenger, thank you so much for trying that out for us. This does seem a little odd to me. I would love to make sure we get you up and running with no issues. Do you have the most current iTunes downloaded on the computer? What I would try to do is try to place the phone into recovery mode through iTunes. The way you can complete this is by powering the phone off all the way. Have the USB plugged into the computer. Plug the device into the USB charger while you are pressing and holding the home button. Keep that home button held down until it pops up on iTunes that "iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes". then you will press on Ok, and then Tap on Restore iPhone, then select "Restore and Update" Please keep us posted.
    KevinR_VZW
    Follow us on Twitter @VZWSupport

  • There is not Sim card message after restoring iphone

    there is not Sim card message after restoring iphone

    There is not a SIM card or the SIM card is not supported?

  • HT201269 After restoring iPhone 4S, left on the "connected to iTunes" or "Connect to iTunes" page, tried restarting, followed all steps correctly?

    After updating to iOS 7, there was an error and I had to restore to factory settings. I then followed the steps to import everything and it appears to have done so, but even when I have restored and synced from my iTune, my screen still shows the "Connected to iTunes" or "Connect to iTunes" page, and will not progress or let me to my homepage. I have spoken to an O2 guru who has told me I've followed all the correct steps, and this is therefore an Apple problem. I have restarted and followed all possibilities, what do I do now?

    Keep trying ...
    Recovery mode is the last option.  If that doesn't work, you'll need to take your iPhone in to a service center.
    Follow the exact steps listed in HT1808.

  • My iphone unable to activate after restore  :

    Hi
    i've download 6.1 firmware from the internet then i restored my iphone by clicking shift+restore . when it's completed this massage shows up in itunes window
    We’re unable to complete your activation.
    This device is not registered as part of the iPhone Developer Program.If you are a member of the Program, please register your device in the iPhone Developer Program Portal.
    i need help
    iphone 4
    6.1

    You have the developer release. If you are not a developer, it's illegal to put it on the iPhone.
    You need to go to that place where you download it for help.

  • There are 2 apps that unable to restore in-app purchasing after restore iPhone, TopikMiddle and TOPIK Card. What is happening with it?

    I paid $0.99 for each apps TopikMiddle and TOPIK Card.
    I can not restore these in-app purchase
    What should I do?
    Or I lost my money for nothing?
    What will Apple do in this situation?
    Please help!!!

    Several erroneous things in your post.
    1. You don't have to restore the iOS to restore the last backup.  After disabling automatic syncing on connection to iTunes (iTunes Prefs > Devices > Disable....), connect phone and right-click the device tab and select "Restore from backup." This restores the last backup without deleting anything on the phone.
    2. If you had to restore the iOS, you could transfer your apps and other purchases to the iTunes library first - same procedure as above but select "Transfer Purchases."
    3.  If you did lose apps, you can re-download them without paying again, unlike music or media.

Maybe you are looking for

  • Even after enabling "Warn me when closing multiple tabs", firefox closes without any warning even if multiple tabs are open.

    I recently installed Firefox 4.0 and in the options, under the section "Tabs", I have enabled "Warn me when closing multiple tabs". But if I have multiple tabs opened with websites loaded in them, and then try to close the browser, it simply closes.

  • Replacing Oracle WorkFlow

    Hi, The client, I am working for don't want to use Oracle Workflow for some reason. But I need Oracle Workflow Manager Schema to deploy my Process flows. So is there a way to deploy the Process flows without the Oracle Workflow Manager Schema? Is the

  • Condtion types _Pricing procedure determination

    Dear friends What the use of CONDITION TYPES  in PRICING PROCEDURE DETERMINATION. With Regards Sankalp singhai

  • Problems in UI editor

    Problem 1, Cosmetic but confusing. After using the UI editor to layout a JClient panel, jbinit() is a mess. Some of the initialiatiuon code is placed beneath a different field's comment. Eventually all the comments appear together at the start of jbi

  • NI MAX throughput error and Camera attribute out of range

    I recently purchased a Point Grey Grasshopper3 camera, it seems to work fine in the Fly Cap software point grey provides, but I get an error in NI MAX when I try to do a simple grab (shown below). This error shows up every time I try to grab an image