Unable to restore after E61 update without problem

Hi there,
First post here but I read a lot...
As I was unable to connect on my home WLAN (a USR9106 DSL/modem/router) I decided to update my E61 to the latest firmware.
I had no problem with the backup nor the update... but now, when I try to restore, I get a "memory full: close some application and try again"
But as you can imagine, I have no open application ! (I also didn't forget to allow installation of non trusted application).
Thanks for your help... I'll be in big trouble if I cannot restore...
Tom
PS I backed up on a large SD cardMessage Edited by tompic on 26-Dec-2006
08:38 PM

I have the same problem now, did you find any solution?
Thanks

Similar Messages

  • Unable to restore after Android Update

    Hi all,
    After updating my Z1 to 4.4.2 I was unable to restore using the built in backup and restore app. The error message states that the selected backup cannot be used due to incompatability of the software!!!! 
    This should have been obvious to sony....
    Also, opening the backup folder in the SD card is of no use since the files were encrypted.
    Will any good soul help me restore or at least retrieve my files?
    Thank you!

    You cannot restore the backup from JB to KK...You should have backed up on google servers,I think from there you could have restored easily.Try this link for the contacts:
    http://talk.sonymobile.com/t5/Xperia-S-SL-acro-S/How-can-I-extract-contacts-from-dbk-file-on-my-comp...
    All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

  • Ipad 2 unable to restore after io8 Update

    Hello apple,
    I backed up my ipad2 in itunes and I downloaded the ios 8 software  through laptop and I try to update the software in ipad2, it said update failed and it went in to restore mode. so when I try to restore it, it says Ipad could not be recovered  and unknown error occured with number 3194, so Now I don't have any software in it. so could you please let me know how should I proceed further, as I dont have any software now. how to revert back or update to ios8.
    Quick help is greatly appreciated.
    Thanks
    Siva Naga Kumar
    9849356535

    MMy iPad update from los7to los8 now it is having a problems i like to know how can I do a clean up it

  • IPad unable to restore after ios5 update

    Following message pops up:
    itunes could not connect to this iPhone because an unknown error occured (0xE8000065)

    MMy iPad update from los7to los8 now it is having a problems i like to know how can I do a clean up it

  • HT4623 do i have to hit 'restore' after an update?

    do i have to hit 'restore' after an update?

    No unless something goes astray during the update and you have to recover by restoring from backup

  • I-tunes does not recognise ipad to restore after failed update to ios 5

    i-tunes does not recognise ipad to restore after failed update to ios 5. Connected i-pad to update to new ios 5. Back-upp went fine but update failed and now i-tunes does not recognise the devise and i-pad will not work so I have no known way to restore.

    Copied from that article.....
    4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button:
    Are you releasing the home button when you see the connect to iTunes screen? Does iTunes start on its own? If it doesn't - start iTunes yourself.
    Also copied from the article.....
    5. If necessary, open iTunes. You should see the following "recovery mode" alert:

  • Error 21 unable to restore after update

    Hello,
    I recently tried to download the new update as it pestered me everytime I plugged my iPhone in (think it was 4.1). It failed, and as a result it said that I had to restore my iPhone. So I go to restore it and now it says unable to restore (error 21).
    I literally have no clue what's going on. Anybody out there offer me any suggestions or advice on how to fix this problem?
    Thank you for your time!

    *Error 20, 21, 34, 37:* These errors typically occur when security software interferes with the restore and update process. If you are using a PC, follow this article to resolve this issue: http://support.apple.com/kb/TS3125 .
    Source: http://support.apple.com/kb/ts1275
    *Basically you need to disable your Anti-virus software and then do a DFU restore.*
    *How to DFU Restore.*
    1.) Open iTunes and connect the iPhone.
    2.) Press and HOLD the Home button AND the Sleep/Wake button at the same time.
    3.) After the screen turns off, +LET GO+ of the Sleep/Wake button and +CONTINUE HOLDING+ the Home button.
    4.) iTunes will pop up a message telling you that it has detected an iPhone in Recovery Mode. (You can let go of the Home button now.)
    5.) Click 'Restore' to restore your phone to Factory settings.
    Also, try updating to the latest version of iTunes before you do this.

  • HT201412 Unable to Restore after Update

    I was trying to update my parents iPad 2, which was long over due as it has never been updated.  After the update was complete it said that it failed to restore.  It is now froze..iTunes no longer recognizes the device and the devices screen shows a picture of a USB plug with an arrow pointing to the iTunes logo.  This appears after being reset, powered off and plug into an outlet.  Any suggestions as to what should be done?  At this point I dont care what is lost, I would just like it to work again...

    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
    Update and restore alert messages on iPhone, iPad, and iPod touch
    http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
     Cheers, Tom

  • Unable to Reboot After Software Update - Unable to Reinstall Mac OS 10.4.10

    Hello,
    I just bought a Macmini 9 months ago, and I believe I may need to either erase the HD to reinstall the original Mac OS (10.4.10) or else replace it. However, I am not familiar with Mac and don't know how to reformat the disk. Can anyone help?
    Each time there is a software update, I experience problems starting up from the HD. After the last update a few days ago, I am unable to start up from the HD at all. I tried using the original install CD 1 to reinstall Mac OS 10.4.10 with archiving. However, I received an error saying "unable to install because there is a newer version already installed." Therefore, I tried to start up from the HD again by pressing Option key at startup, but the Macmini continously turned off by itself without rebooting. I tried reinstalling Mac OS with the erase option, but it failed. After that, the Mac OS install CD1 only gives me the option to reinstall additional applications, but when I select continue, there is not HD shown to install the applications.
    Disk Utility First Aid on CD1 was unable to repair the disk. I received the following messages: "Invalid sibling link", "Volume check failed", "The underlying task reported failure on exit", "1 HFS volume checked", "1 volume could not be repaired because of an error."
    At the bottom of the page under Disk Utility, the following information about the disk is available. Format: Mac OS Extended (Journaled); Capacity: 111.5 GB (119,690,149,888 Bytes); Available: - ; Used: - ; Number of Files: - ; Owners Enabled: - ; Number of Folders: - .
    System Profiler is able to identify type, disk identifier, file system, etc. It shows the volume supports journaling, but is not journaled.
    Scan Image for Restore shows Library_Preferences (Empty), and Root applications are all grayed out.
    I performed the Apple Hardware Test (ver 3A129) by pressing D at startup. The test ran for 5 minutes and 6 seconds. It reported "No trouble found".
    It seems the HD is empty, but the install CD is not offering any options to reinstall the OS, only the additional applications. I believe it is a partition error, but I am not familiar with Mac and hesitate to proceed any further.
    How do I reformat the disk so that I can reinstall the original Mac OS 10.4 and 10.5?
    Your help is sincerely appreciated. Thanks.

    Good news!
    The usual reason why updates fail or mess things up, is if Permissions are not fixed before & after every update, with a reboot... you may get a partial update when the installer finds it doesn't have Permissions to change one obscure little part of the OS, leaving you with a mix of OS versions.
    Some people get away without Repairing Permissions for years, some for only days.
    If Permissions are wrong before applying an update, you could get mixed OS versions, if Directory is the slightest messed up, who knows!
    If many Permission are repaired, or any Directory errors are found, you may need to re-apply some the latest/biggest updates.
    I only use Software Update to see what is needed, then get them for real via...
    http://www.apple.com/support/downloads/
    That way I can wait a week or so, check the forums for potential problems, and get Permissions & such in order before installing.

  • T430s unable to restart after Windows Update

    I'll start with the short version. I just got my ThinkPad T430s, so there were a lot of Windows Updates to install. After one batch, I am no longer able to restart the machine. When I click Shut Down, Restart or Log Out, the desktop disappears, but instead of bringing up the "Shutting Down..." screen, it just shows the desktop background indefinitely until I power down by holding the power button. I have been unable to figure out what is causing this, how to fix it, or which Windows Update was the cause.
    Longer version:
    I upgraded my machine from Windows 7 Home to Pro. After a series of Updates the problem started. I tried a lot of things, then decided to try reinstalling Windows. Again, it happened after a large chunk of Windows Updates. I have tried a million things. System Restore points don't fix it. "Clean Boot" doesn't fix it. Uninstalling Windows Updates doesn't fix it. Eventually I tried to use the Lenovo recovery CD, but it turns out the recovery partition only contains one of the 4 CDs you use. You don't find this out until you get an error that says "You have inserted the wrong disk" which occurs AFTER the recovery software has wiped all your partitions. So now my recovery partition is gone as well. My current plan is to install Windows fresh to hold me over until Lenovo can ship me the full set of recovery CDs, but if anyone has any ideas for what might be causing this no restart problem, I would appreciate it.

    kb2647753 seems to be the problem child.
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество
    Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
    PM requests for individual support are not answered. If a post solves your issue, please mark it so.
    X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
    I am not a Lenovo employee.

  • Cant restore after installing updates how do I change the home user/account

    I installed 3 updates, opps, this morning, and when I restarted the computer it had reverted back to old setting from 2004. I purchased the computer from a friend, and had worked hard to remove his stuff, now my settings mail etc are gone and the old stuff is back. How do I restore the computer to what it was before the updates took it all off? also how do I change the home from his back to ours? sorry, I am new at this and very very frustrated with the mac so far.

    Changing the home folder name caused the problems, not the updates. The problems won't show up until you restart, which, in your case, was just
    after the updates. See:
    <http://docs.info.apple.com/article.html?artnum=107854>
    <http://docs.info.apple.com/article.html?artnum=106824>
    When you get a used computer, it is safest to erase the disk (with zeroing option), then reinstall OSX, update it, and get the latest versions of all the software you need. You should also run Extended Tests from the Apple Hardware Test disc to be sure there are no hardware problems.

  • Unable to restart after software update 10.3.1.1779

    I am unable to get  my Z10 to restart after this update.
    I have searched endless avenues and have now resorted to deleteing the notifcations for this update when they come in, I have downloaded and installed it, but when asked to restart, my phone stalls on the loading screen forever, the longest I have waited for it to restart is 3 days, with 24 hours of that on 99%.
    I am now the but of all phone related jokes as everyone I know has an IPHONE that works perfectly, but I insist on keeping this awful Z10 becuse I dont want to join their rank....too tink I spent £500 on this when it came out (more fool me)
    It would seem that the general consensus is, I will have to go to the inconveience of taking my Z10 in to a phone shop, were they will send it off to BB for the update to be installed.
    PS; Blacberry's forum is as hard to navigate as the phone is to actually get working proberly.

    This has been the worst software update I have ever encountered. My Q10 is completely unreliable and I am going to switch to another device in the morning. I have restored factory settings and have successfully wiped the app to sync my shared Google Calendars, the z and y keys have swapped on my keypad and the Q10 still turns itself off arbitrarily, wipes all text and phone messages and can't recall what network I'm on or what my home wifi settings are.

  • Restoring after firmware update - Ways :)

    Hi All,
    Nowadays we are receiving quite a few complaints that customers are unable to restore the application after updating their firmware.  I would like all to discuss to come up with some ways to restore their applications after firmware update.
    Before updating firmware
    Customer can backup his phone using Nokia PC Suite's Content Copier application.
    He can store his Contacts and Messages using Nokia Communication Centre as .csv file or .txt file.
    For his Contacts he can sync with pc suite supported sync applications.
    Messages he can store in Memory card and he can make a backup of memory card in PC.
    If he is using Nokia PC Suite for his Multimedia items he can use Image Store if he is using Nokia PC Suite or Nokia Photos if he is using Nokia OVI Suite.
    For Music he can use Nokia Music Manager or Nokia Music.
    Once after updating his firmware, if he is unable to restore he can get those from above said applications.
    If his calendar entries are not restored(as in case of some of Nokia e 71s and Nokia N 95/95 8 GBs), for God's sake if he has got one more similar device(or device having switch application on phone), he can restore the backup file to another phone having switch application, then he can transfer his data (Contacts, Calenders etc ) to his original phone
    Dear Forum members, if you have got any other work around please let me know regarding the same, which will help our customers

    Hi,
    If you have issue in Nokia PC Suites, [subject to your phone's compatibility with Nokia OVI Suite 2.0.0.10 ],
    you can install Nokia OVI Suite 2.0.0.10 and check if you can take backup and restore it later.
    Also i would suggest to use USB for taking backup, since it will be faster than Bluetooth.  Also you can select one category at one time(say backup contacts alone, then Calendar, then messages etc and so on ....)
    Its better to skip memory card backup while backup-ing other Phone data for faster backup.  Memory card backup can be done separtely(since it wont be affetcted while updating firmware, users can safely remove memory card while updating firmware)
    Nowadays though recent phones has got UDP(User Data Prevention i.e., even if you update your phone's firmware, your data wont get erased ), still it is recommended to backup your phone data.
    Hope this could help
    I welcome our experts to add more details related to this topic.

  • Apple TV after recent update has problems with Hulu Fall 2014 shows

    In specific, ONCE Season 4 from ABC. The shows play about 15-17 minutes, up to the 2nd commercial - which fails almost immediately, the screen goes black and nothing. (I did find that the SUBTITLES come through - of all things.) If you try and re-start the episode with RESUME PLAYING, you'll just stare at a blank screen for ever.
    I have notified HULU of this issue with their content - other shows (like Agents of Shield) play fine, just not ONCE Season 4.
    Obviously, something is broken and needs to be fixed.
    **** Update ****     The problem seems to be caused by the subtitles. Turning the sub-Titles off seems to work-around the problem.

    i dont have an ipad but ive had problems also, streaming music from my itunes off my macbook to my appleTV so i after seeing all these itunes 11 problems, im starting to think its the new itunes cuz my airplay was working fine until i updated also.

  • After 18181 update - wireless problems

    After I applied the 18181 update today, airport will connect to my router but will stop responding after about 10 minutes....reselect another router (there are several in my neighborhood) then it will again work for about 10 minutes until it stops. It will remain connected and appear to have no problem when running diagnostics, it just stops working on either Safari, Firefox, or Mail. It appears to be related to this update since the problems began immediately after the update was applied.

    Hi,
    I really like the changes done in the forum.
    I also appreciate the efforts take by the SDN team to keep it up and reduce the downtimes.
    But there are problems with this one as goes with any other thing.
    As mention above,
    I can stay with first one...
    But the response time is really something to look forward. I can make a cup of coffeee after clicking on an event...
    Kindly, do something for the same.
    Regards,
    Amit
    Today response time is good...
    Edited by: Amit Khare on Dec 18, 2007 10:07 AM

Maybe you are looking for