Unable to restore Aperture after minimizing.

Just upgraded to Aperture 3.4.5 on Mountain Lion for iMac.  When I minimize the application I am unable to restore it by clicking on the Aperture icon in the dock.  I was able to do this previously.  Is the a new feature or something that can be adjusted?  To retun to full screen, I have to right click on the icon in the dock and select the Application at the top of the list. 

No, this issue only happens with Aperture.
And have you tried Frank Caggiano's advice to remove Aperture' preferences, since it is only Aperture, that connot restore its windows?
How to remove Preferences is described here: Aperture 3: Troubleshooting Basics
Delete the user preferences
You can resolve many issues by restoring Aperture back to its original settings. This will not impact your image files or your library. To reset your Aperture user preference settings to their original state, do the following:
Quit Aperture.
In the Finder choose Go to folder from the Go menu.
Type ~/Library/Preferences in the "Go to the folder" field. Press the Go button.
Remove the "com.apple.Aperture.plist" file from the Preferences folder.
Note: The locations of your Aperture libraries are stored in the preference file listed above. If you have stored your library outside the default location of  ~/Pictures/Aperture Library, make a note of where the library is before deleting the Aperture preferences file. If you have more than one library, you can bring up a dialog to choose which one to load by pressing Option immediately after you open Aperture.
Log off and on again after removing the preferences - otherwise it may not have any effect in Mt. Lion.

Similar Messages

  • Iam unable to restore backup after updating ios

    Hello friends iam unable to restore backup after updating ios to 6.1.3.plz help me how to restore backup iphone 4

    Did you already try to connect in recovy mode and restore, as explained in this article?
    http://support.apple.com/kb/HT1808

  • Unable to restore backup after updating iphone 4, because "not enough free space"

    I updated my iphone 4 to v7 via itunes (v12), and in doing so, my camera roll was erased as were most of my calendar events.  I am trying to restore the backup that I created just before updating, but I get an error message in itunes that says "itunes could not restore the iphone" because "not enough free space".  There is 2.5gb free on my iphone, and I created the backup just before updating so there should be plenty of room.  Does anyone know how to get the iphone to restore and/or how to put my pics & calendar back?  itunes hangs up at the end while syncing too...

    hello again, don't post twice the same question, it won't be answered faster.
    see your previous thread: iphone 4 unable to restore backup after updating to v7

  • Unable to restore 4s after updating software

    unable to restore 4s after updating software , the wake up screen is nonresponsive

    Hi D.Cohen
    Thanks 4 ur attention , I did exactly what u told several times , the restoring ( updating ) starting , after some times , there is a message appears to ask for allowing pc to access iphone data , followed by another one telling to give  answer via iphone ( which is still unresponsive ).
    After downloading completed , I got another message , telling that there is an error occurred and asking to try again . ( each trial take around  1-2 hours )
    pls advise
    0

  • Unable to restore aperture library using time machine

    Aperture's UI was being barely responsive earlier today, and when I deleted a photo, it ended up actually deleting an entire album.
    So I close Aperture and go to my last Time Machine backup to restore my Aperture library. The restore is going perfectly normally, but it gets about halfway through and stops. It throws up a "You do not have permission to do that" notice.
    I've tried doing this numerous ways, including an actual "Restore" via Time Machine and also simply pulling the Aperture library off the Time Machine HDD via Finder. Same result no matter what I do.
    Help please! I'm looking at an icon of my Aperture library that has all my photos in it, but I cannot copy it!

    Thanks, MacDLS. I had checked the permissions under Get Info, but I don't remember an "ignore ownership" option. I'll look for it.
    The problem may be a corrupted HDD. After posting my question, I ran Disk Utility, and it was unable to complete a "Repair Disk" on the backup HDD. So I'm assuming there are some corrupted sectors.

  • Unable to restore iPhone after IOS5 install

    Hello,
    This evening I encountered a error -50 after upgrading the ios version of my Iphone 4 to the 5.0.
    What happened :
    - iTunes version is the last one available 10.4.0.142,
    - After many tries I get the 5.0 ios version
    - The I ran the update of my iPhone (the last ios version was the previous one of the 5.0).
    - All was Ok, until iTunes sayd me that the phone had a pin code and that I have to enter it to unlock.
    Since, I have a first pop-up in Itunes saying me that the last restore of the content of the Iphone had been stopped and propose me to continue the restore.
    But after selecting this option another pop-up explains me that an error occured during the restore (-50).
    I tried http://support.apple.com/kb/TS3694?viewlocale=fr_FR#error50, and nothing work on my computer (I didn't try to directly plug the computer to the net).
    No firewall is running on my computer, neither anti-virus during the manipluations.
    I ran ITunes diagnostics with the Iphone plugged and all seems to be Ok.
    Can somebody please help me, because I have no other idea?
    Thanks by advance.
    Regards.

    Try a DFU restore?
    http://modmyi.com/wiki/index.php/HowTo:_Enter_DFU_RestoreMode

  • Unable To Restore backup after updating to OS 10.3.1.1565

    Hi there...
    i just updated my Q5 to os 10.3.1.1565
    (Had an error with memory when trying to do OTA update , so i did a full backup on device via link , Factory Reset , then updated it )
    Then i tried to do a full restore , but it wont restore it
    saying:
    "Restore was canceled"
    "The Operation was canceled, and some items were not restored."
    is there anyway to restore the backup without reverting to an older os ?
    Really could use some help or info's ...
    much thanks in advance

    Hi and Welcome to the Community!
    Refer:
    Article ID: KB36134 BlackBerry Link fails when attempting to restore a backup file and displays "Restore was cancelled. The operation was cancelled and some items were not restored.
    However, given your description, I suspect something else. It has been reported from time to time that if you update too far in the OS versions that the restore will fail. Usually, though, this is in downgrading the OS...not updating...but it has happened (as per reports here) more than once in the way you describe.
    Sadly, the "fix" depends on your situation. If you have all of your contacts, calendar, etc. on a compatible email server (e.g., Outlook.com), then simply reintegrate that account and the data will come back from the server. Or, if you were using LINK to synchronize to desktop Outlook then simply re-establish that. But, if you were taking the most risky method of using these on the device truly "stand alone", then your recovery is much more difficult. Plus, if you had other data (photos, videos, documents, etc.) that you were storing in Device Memory instead of on the SD card, then you may have to also do this.
    If indeed you need to do the most challenging method, then it is thus:
    Load your prior OS to your device...either via LINK (if it offers it) or via AutoLoader
    Restore your data to your device
    Purchase, install, and use Ultimate Backup to backup your calendar, contacts, etc. to your SD card
    If you also have data in Device Memory (photos, etc.), then copy those as well to the SD card
    Load the more recent OS to your device
    Restore via Ultimate Backup from your SD card, as well as continue to store your photos and such there (to avoid this problem in the future regarding photos, documents, etc.)
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Unable to Restore iPhone after it crashed

    My 3GS iPhone running iOS 4.1 crashed while quietly sitting on my desk at work. The only thing I can currently do with my iPhone is make emergency iCalls. When I got home from work I attempted to restore my iPhone but iTunes requires me to enter my passcode. I am not able to enter my passcode because my iPhone iCrashed. Any iNformation about how I can get around an iCrash when my iPhone that can only prompt me to connect to iTunes to do an iRestore would be greatly appreciated.

    Try a DFU restore?
    http://modmyi.com/wiki/index.php/HowTo:_Enter_DFU_RestoreMode

  • Unable to restore iPhone 6

    i'm unable to restore iPhone after it was blocked mistakenly typing wrong pass code while the display was broken. please suggest how to restore.

    Hello Zaiduzamaan,
    Thanks for using Apple Support Communities.
    If you have a message on your iPhone that it is disabled, then you will need to erase it by following any of the methods outlined in the article below.
    Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support
    Take care,
    Alex H.

  • Has anyone been unable to restore their iPad after attempting to upgrade to ios5? error 1

    Has anyone been unable to restore their iPad after attempting to upgrade to ios5? I get an unknown error 1 message. Thanks.

    I have the same problem. Something happened during the download and froze iTunes. After spending three days searching these forums with the dead iPad, the only thing I got to work was to try downloading iOS 5 using my sons computer. This worked. However I cannot now get my computer's iTunes to sync with my iPad.. It contains the same error message (1602) and has the same problem as before. It is not an antivirus problem. I need some help too

  • TS3694 i am trying to restore my iphone after an ios update but keep getting a message saying it is unable to restore. PLease assist

    i am trying to restore my iphone after an ios update but keep getting a message saying it is unable to restore. PLease assist

    The phone was jailbroken, wasn't it?

  • HT1414 i am unable to restore my iphone 4s " screen showing USB cable arrow showing to connect to iTunes" when i connect to itunes it after asking restore starts (step 3) updating itunes with no effect to screen which is still showing usb and itunes symbo

    i am unable to restore my iphone 4s " screen showing USB cable arrow showing to connect to iTunes" when i connect to itunes it after asking restore (step 3 without going to step 4) starts updating itunes with no effect to screen which is still showing usb and itunes symbols

    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...
    Be sure to Follow ALL the Steps...
    But... if the Device has been Modified... this will Not necessarily work.

  • Unable to restore after Android Update

    Hi all,
    After updating my Z1 to 4.4.2 I was unable to restore using the built in backup and restore app. The error message states that the selected backup cannot be used due to incompatability of the software!!!! 
    This should have been obvious to sony....
    Also, opening the backup folder in the SD card is of no use since the files were encrypted.
    Will any good soul help me restore or at least retrieve my files?
    Thank you!

    You cannot restore the backup from JB to KK...You should have backed up on google servers,I think from there you could have restored easily.Try this link for the contacts:
    http://talk.sonymobile.com/t5/Xperia-S-SL-acro-S/How-can-I-extract-contacts-from-dbk-file-on-my-comp...
    All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

  • Unable to Restore BB Software after OS Upgrade

    Hi. I am unable to restore several programs (PWKeeper, BBM, BBTraffic, Memo, Tasks, Maps) after a wipe and OS upgrade.  I backed up the phone prior to the wipe but did not turn off wireless sync. Learning now that I should have.  I have deleted desktop sync service book, rebooted, tried to restore. No success. Even reinstalled OS.  Is there combo-keys to enter on phone that turns off wireless sync prior to restore?  DM is not allowing me to restore these apps.  9850 Storm. Thx for help.

    Oh......BBSAK for this...got'ca. I'd not assumed you were using that methodology. You probably need to do some research on BBSAK.ORG as to this...there likely are posts on their own site dealing with the issue. As I recall, it's not guaranteed to be 100% perfect...but I don't recall much more than that as I prefer, whenever I update my BB OS, to reinstall all of my apps from scratch...just to be most sure that things are truly "clean". It is also possible that the apps you are trying to restore aren't compatible with the precise OS level you have updated to (with the apps you listed, this may actually be a high probability since those apps are normally included with the OS package itself).
    Since the apps you listed are provided along with the OS package, then the normal method of installing them from the Desktop Software should indeed work...odd that they are greyed out for you there. FYI...those apps normally aren't part of any Desktop Software backup per se...data from them and/or configuration settings about them may well be included in the databases, but nor normally the apps themselves per se.
    I suppose what I'd recommend is skipping the BBSAK app backup for anything that is included within the BB OS package itself (in the list you provided, all are part of the OS package, though BBM likely will have an update available from AppWorld). Then, again use BBSAK to perform another wipe/reload of your desired OS, but during the OS loading selections make sure that the apps you listed are selected to be loaded to your BB while it loads the OS (as opposed to trying to add them later).
    Then, the 3rd party app restore from BBSAK may well work for the other apps you backed up with it...or you can reacquire them from their original sources (AppWorld, etc.) and perform a clean install of them all.
    An odd situation you indeed have, but I'm sure there's a way to get you going again.
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Error 21 unable to restore after update

    Hello,
    I recently tried to download the new update as it pestered me everytime I plugged my iPhone in (think it was 4.1). It failed, and as a result it said that I had to restore my iPhone. So I go to restore it and now it says unable to restore (error 21).
    I literally have no clue what's going on. Anybody out there offer me any suggestions or advice on how to fix this problem?
    Thank you for your time!

    *Error 20, 21, 34, 37:* These errors typically occur when security software interferes with the restore and update process. If you are using a PC, follow this article to resolve this issue: http://support.apple.com/kb/TS3125 .
    Source: http://support.apple.com/kb/ts1275
    *Basically you need to disable your Anti-virus software and then do a DFU restore.*
    *How to DFU Restore.*
    1.) Open iTunes and connect the iPhone.
    2.) Press and HOLD the Home button AND the Sleep/Wake button at the same time.
    3.) After the screen turns off, +LET GO+ of the Sleep/Wake button and +CONTINUE HOLDING+ the Home button.
    4.) iTunes will pop up a message telling you that it has detected an iPhone in Recovery Mode. (You can let go of the Home button now.)
    5.) Click 'Restore' to restore your phone to Factory settings.
    Also, try updating to the latest version of iTunes before you do this.

Maybe you are looking for

  • Some interfaces are not shown in the sxmb_moni

    Hi all, We are facing the following scenario:  we have one interface in XG1 (development environment) which is very simple: it consists of a sender ‘File’ and a receiver ‘IDOC’. The file format has been double checked and apparently is what XI define

  • New Process Chain Activation

    When a new process is transported to qa or prod it has to be MANUALLY activated one time before the NEW: prefix is removed and the chain can be used by a meta chain. Is there a configuration setting or some way to have the chain AUTOMATICALLY activat

  • CRM Update hängt laut Aussage von Microsoft wegen Adobe Reader

    CRM Update hängt laut Aussage von Microsoft wegen Adobe Reader

  • Flash win projector - signing with certificate

    Hi, One of my client want to sign an exe file with certificate. I bought a certificate "standard code signing" and i want to use signtool.exe to sign the aplication, but all the time i get an error. has any one try to sign an exe app?? I will be grea

  • Quicktime render location

    Heres my problem. I have two internal hard drives. One I use as a scratch drive, the other I keep my system and applications on it. Currently I am trying to export fairly large family videos through quicktime 7 into a smaller format for backup (H.264