Unable to restore default newtab setting

Since a few days ago, the settings for opening a new tab in firefox have changed to redirect me to
"http://www.4-you.net/". I have tried using the About:config menus to restore the default newtab page, and also attempted to use a "restore all defaults" add-on to the browser, but neither method solved the problem. Can someone help me get rid of this annoying new setting and restore the default setting?

I ran the "Hitman" program, and while it seems to have removed some threats, I have still been unable to resolve the problem. The new tab still goes to the incorrect place, and I am still unable to effect a change to the setting via the About:config menu.

Similar Messages

Unable to restore from DVD set - ThinkPad keeps rebooting to Rescue and Recovery screen

Hello:
Lenovo x140e laptop / 2.05 BIOS:
(image link removed)
I have used Lenovo Rescue / Recovery to make a full disk image backup to DVDs for installation of SSD drive.
Attempting to boot from Rescue / Recovery DVD appears to load Windows files, start Windows then goes to this Lenovo R&R screen:
https://www.dropbox.com/s/f4h423vbk1rpfm0/2014-09-18%2008.53.21.jpg?dl=0
No menus show up asking to restore anything, in about 5 seconds it shuts down and reboots again over and over.
I did have BIOS 2.01 and upgraded it using Lenovo BIOS boot DVD upgrader, now is 2.05 and same result.
Factory reset would be OK, but tI paid extra for Windows 7 pro "downgrade" (ironic, no?) that I would like to keep. System restore disks that came with theunit are for Windows 8.1 .
Help?
Here is complete laptop box label:
(image link removed)
New SSD passes diagnostic tests:
https://www.dropbox.com/s/y62oud7l4miclrd/2014-09-18%2008.51.09.jpg?dl=0
Moderator comment: Links to images showing serial number(s) removed to protect member from mischief.

megan1813 wrote:
Upon starting normally, a very scary black screen with code and the grey error message box with multiple asian languages appeared, asking me to restart again.
FYI that error is known as a "kernel panic", typically software related but potentially hardware related.
I recommend starting with a clean install (erase the hardware, and reinstall Mac OS X). Do not transfer/migrate any data yet. After you have created a new user account, test the computer to ensure the hardware seems responsive. If computer performance is positive, use Migration Assistant to began migrating your backups to your computer.

E72 : "Item no longer available; Restoring default...

Hi all,
Has anyone seen this message on E72 ?
I have had my E72 for abt a month. After much struggle and trial/errors I had got most of the stuff working (email etc.).
HOWEVER, I made the big mistake of accepting the firmware v 023.xx upgrade. It never completed the update successfully (the USB connection kept getting lost).
But the worst part is I am now getting these random messages when I am simply scrolling thru' the menu items.
"Item no longer available. Restoring default key setting".
Has anyone seen this message on E72 ? Any help will be greatly appreciated.
When I check the firmware it still shows 021.024 dated 17-Oct-2009.

Did you upgrade using OVI or NSU? I did upgrade mine to 023.002 with NSU 2.4.1. If you use Vista or 7 as OS, make sure you have Administrator right while installing OVI, PC Suite, or NSU.
During the installation, the phone disconnected. I remove the USB connection and the battery as well, then plug the USB and battery in then click Retry. It worked after 2 times remove and plug-in.
I never seen the message you have before. I think it is because the firmware upgrade didn't finish successfully. And for USB keep disconnected, try use other USB port and make sure it is direct connection from PC to E72 without using any USB hub.

I cannot get the STOP button to appear in the Navigation Toolbar, even after going through the suggestions; it will appear when the Restore Default Set window is open, but disappears as soon as DONE is clicked

The X for STOP loading the page does not appear in the Navigation Toolbar. If I do the right click, select Customize, Restore Default Set, it appears; click Done and it disappears. I have disabled the theme; disabled all extensions; reset the toolbar & controls; unchecked the acceleration. No luck.

Starting in Firefox 4, the Go, Stop and Reload buttons are combined in one button at the right end of the URL or Address bar. The button changes depending on the activity:
*green Go arrow when typing in the address bar
*red Stop ("X") button while page is loading
*gray Reload (circular arrow) when page is finished loading.
Separate buttons are possible:
#Open Customize Toolbar window by clicking Firefox button > Option > Toolbar Layout '''''OR''''' clicking View > Toolbars > Customize if using the Menu Bar '''OR''' right-click in an empty space on a toolbar and choose Customize
#Stop and Reload buttons will show separated between the address bar and the search bar
#drag the buttons anywhere on the Navigation toolbar
#*order Reload-Stop will combine into one button
#*order Stop-Reload will remain separate buttons
#*or drag a "Separator" from the Customize window between Reload-Stop and they will remain separate
#click Done at bottom right of Customize window to finish
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
You have multiple old versions of Java Console installed that Java did not clean up when updating. Your old versions are: 6.0.16, 6.0.22<br />
Follow these instructions to remove the old versions: http://kb.mozillazine.org/Java#Multiple_Java_Console_extensions

How to restore the default view setting for FINDER?

I played with my finder's view setting and I set it default to all..
Now I want to restore the default view setting, how is that possible?
Thanks!

Go to your home folder -> Library -> Preferences. Locate the file com.apple.Finder.plist and trash it. Then control-option-click Finder's Dock icon and select Relaunch. All Finder settings will now be back to the OS X defaults.

I restored default setting and now my phone wont allow me to unlock it with my existing user id and password.

I cannot unlock my phone with my user id and password after I restored default setting.

Hello brgrtato,
Thanks for using Apple Support Communities.
You need to remove the account, and sign back in with your current Apple ID account.
iOS: Sign in with a different Apple ID in the iTunes Store, App Store, and iBooks Store
http://support.apple.com/kb/HT1311
Take care,
Alex H.

Restore default setting

How do you restore default setting on iPhone 4s?

settings -> General -> reset --> erase all contents and settings.

Unable to Restore Database

We are attempting to migrate from an older windows platform to a Windows 2008 platform. The old configuration had two disk drives, and Oracle Express was installed on E: - the new server, being virtual has been configured with only the C: drive.
I've been reading up on RMAN, and have confirmed that the daily backup process on the old server does create an RMAN backup.
I've installed (and several repeat uninstall/installs) a copy of Oracle Express 10g in the default location, accepting all defaults except for my password (which is irrelevant under RMAN).
I've duplicated the directories, I've figured out how to restart the database so I don't have to reinstall, but I am unable to restore the application database. I'm not eager to use other utilities than RMAN, since learning RMAN has already taken up more time than is budgeted for this task.
I receive varying error messages, depending on the techniques I try to use. Usually I receive this closing message:
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of startup command at 12/14/2010 13:39:24
RMAN-04014: startup failed: ORA-02778: Name given for the log directory is invalid
The other message I receive is the following or a variation on the theme:
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at mm/dd/yyyy hh:mm:ss
RMAN-06564: must use the TO clause when the instance is started with SPFILE
The second message is a direct response to the following:
rman target /
startup force nomount;
run
{set controlfile autobackup format for device type disk to 'c:\backup\oracle\XE_%F';
# use 'c:\oraclexe\app\oracle\product\10.2.0\server\database\SPF2FILE_%F'
RESTORE SPFILE FROM AUTOBACKUP;
I have no clue how to specify correctly that the SP2FILE.ORA file is the backup of the control file (can provide the script to create the backup if you think it will help, which runs a series of logs to capture settings and then executes the backup.) The backup process was inherited and I cannot explain why the default RMAN process is not being used to create the backup. However, I've been unable to use the default RMAN output to restore on a different server, as well.
Please help - this task is now very late, and I'm not even sure whether I'm asking the correct questions to solve the problem(s) I'm experiencing.

I'm not sure what you mean by the instance 'status'. I install a fresh copy of Oracle Express 10g. Copy over the backup files for the database and logs, copy over the SPFILE..., and attempt to restore, with the errors reported above.
When I install XE, the instance is up and running (as confirmed by the 'home page' of XE being displayed in the browser waiting for logon and password. When I start the process to restore, XE is no longer available (in some form of maintenance mode and unavailable to normal users).
What do you mean 'using pfile/spfile'? How would I 'use'? (I did verify that if I take a 'backup' using the XE tools, I CAN restore on the same instance where I took the backup. Just not on a different, new instance of XE.)
The article is quite interesting, but it seems to assume that I'm working in the same instance where the backup was taken. The instructions also seem to contradict the error messages I presented above.
I don't have any autobackup settings on my brand new copy of XE, so the following command in the article does not seem meaningful to me. Clearly it makes sense to use both a TO and FROM. It seems that what I should be doing is using a 'FROM' where I have the 'TO'; what happens if I point to my backup copy of the SPFILE in the FROM clause instead of 'AUTOBACKUP'? The command string I provided in my original post may be trying to do that, but I can't tell from the source article (which I now have to go find...)
"RMAN> RESTORE SPFILE TO '/tmp/spfileTEMP.ora' FROM AUTOBACKUP;"
Additional question - "DBID"? In express, I do not see any value for DBID. I understand why it would be relevant in a more advanced implementation, with multiple databases being maintained under the same Oracle installation, but it's not clear to me what DBID identifies - the database's internal "primary key" value in a directory of databases, or some other implication.
Edited by: user13488246 on Dec 16, 2010 7:13 AM

HT1414 I am unable to restore my device as my ipad has been disabled.

I am unable to restore my device as my ipad has been disabled. This was caused by enetering the incorrect security code too many times. However, i know that security code entered was in fact correct so do not understand why it would not unlock.

No i actually locked my screen straight away after creating the code just to test it. That's what makes it so frustrating is that there is no way the code i entered was wrong. I ended up trying 0000 incase their was a sort of default code but nothing. When setting up the code you have to enter it twice to make sure you don't make an error, so i know i have been entering the right code.

Somehow when I do a search from toolbar it redirects to bing. I have been unable to restore it so that it goes to google. How do I remove this unwanted search engine?

Somehow when I do a search from toolbar it redirects to bing. I have been unable to restore it so that it goes to google. How do I remove this unwanted search engine?

Hi kjkirtley,
Your question is not quite clear about where you are doing the searches from, but I will presume you are trying to do searches from Safari (Apple’s web browser) and it is using Bing as the default search engine. You can set the default search engine to Google by going to the Safari menu > Preferences > General > Default Search Engine:
See this article for further information -
Safari 7 (Mavericks): Search the web
http://support.apple.com/kb/PH17150
Thanks for using Apple Support Communities.
Best,
Brett L

Unable to restore and recover my Database from RMAN Backup

Dear All,
Iam practicing RMAN in Windows environment.
My configurations are
CONFIGURE RETENTION POLICY TO REDUNDANCY 1; # default
CONFIGURE BACKUP OPTIMIZATION ON; # default
CONFIGURE DEFAULT DEVICE TYPE TO DISK; # default
CONFIGURE CONTROLFILE AUTOBACKUP ON; # default
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO 'F:\Backup\%F'; # default
CONFIGURE DEVICE TYPE DISK PARALLELISM 1 BACKUP TYPE TO BACKUPSET; # default
CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE MAXSETSIZE TO UNLIMITED; # default
CONFIGURE ENCRYPTION FOR DATABASE OFF; # default
CONFIGURE ENCRYPTION ALGORITHM 'AES128'; # default
CONFIGURE ARCHIVELOG DELETION POLICY TO NONE; # default
CONFIGURE SNAPSHOT CONTROLFILE NAME TO 'E:\ORACLE\DATABASE\SNCFORCL.ORA';
CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT 'F:\Backup\%U.bak';
Then i took the RMAN backup, now iam shutdown my DB and removed one logfile..
then i tried to startup the DB but it is saying
ORA-00313: open failed for members of log group 3 of thread 1
ORA-00312: online log 3 thread 1: 'E:\ORADATA\ORCL\REDO03.LOG'
So i tried to restore the Database with my rman backup
RMAN> restore database;
But i am unable to restore my logfile in the Datafiles location where as all other datafiles are restored but redo logfiles are not restored.
So, i am unable to recover my DB
Please tell me whether i am doing any mistake, what is the solution for my problem.
Thanks in advance
Mahi

All you restored was your datafiles.
Now issue recover database and that will apply the archive logs.
This is in the oracle documentation.
"You must restore backups of these archived logs for recovery to proceed. You can restore either to the default or nondefault location. If you do not have backups, then you must performing incomplete recovery up to an SCN before the first missing redo log and open RESETLOGS."
http://download.oracle.com/docs/cd/B28359_01/backup.111/b28270/osrecvry.htm
In this case after issuing restore database in RMAN, then issue this.
"Recover database"
It will then be an incomplete recovery. They should have been multiplexed. Did you restore your controlfile with this backup? You may have to issue an "Alter database open resetlogs;"

TS3579 I found this useful because I did not know about the effect of typing in data and that you could only drag to rearrange the data. I had typed in data before and this had caused problems but restoring defaults did not cause correct dates to show up

I found this (TS3579: If the wrong date or time is displayed in some apps on your Mac Learn about If the wrong date or time is displayed in some apps on your Mac) useful because I did not know about the effect of typing in data and that you could only drag to rearrange the data. I had typed in data before and this had caused problems but restoring defaults did not cause correct dates to show up in Finder.

It sounds like there are a couple things going on here. First check if you have a successful install of SQL Server, then we'll figure out the connection issues.
Can you launch SQL Server Configuration Manager and check for SQL Server (MSSQLSERVER) if default instance or SQL Server (other name) if you've configured your instance as a named instance. Once you find this, make sure the service is started.
If not started, try to start it and see if it throws an error. If you get an error, post the error message your hitting. If the service starts, you can then launch SSMS and try to connect. If you have a default instance, you can use the machine
name in the connection dialog. Ex: "COWBOYS" where Cowboys is the machine name. However, if you named the SQL Server instance during install, you'll need to connect using the machine\instance format. Ex: COWBOYS\Romo (where Romo
is the instance name you set during install).
You can also look at the summary.txt file in the SQL Server setup error logs to see what happened on the most recent install. Past install history is archived in the log folder if you need to dig those up to help troubleshoot, but the most
recent one may help get to the bottom of it if there is an issue with setup detecting a prior instance that needs to be repaired.
Thanks,
Sam Lester (MSFT)
http://blogs.msdn.com/b/samlester
This posting is provided "AS IS" with no warranties, and confers no rights. Please remember to click
"Mark as Answer" and
"Vote as Helpful" on posts that help you. This can be beneficial to other community members reading the thread.

TS3694 unable to restore iphone error code 3194 keeps coming up what do i do?

unable to restore iphone 4 - error code 3194 keeps coming up what do i do ?

Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
Install the latest version of iTunes.
Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. FollowiTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
Try to restore from another known-good computer and network.
If the errors persist on another computer, the device may need service.

Unable to restore TABLESPACE using RMAN backups

Hi,
I am not able to restore tablespace using RMAN (TSPITR).
I have full backup of database,
While try to restore it's failed.
RMAN> recover tablespace TEST1 until logseq 706 auxiliary destination '/tmp';
Starting recover at 16-OCT-13
using channel ORA_DISK_1
RMAN-05026: WARNING: presuming following set of tablespaces applies to specified point-in-time
List of tablespaces expected to have UNDO segments
Tablespace SYSTEM
Tablespace UNDOTBS2
Creating automatic instance, with SID='CsFz'
initialization parameters used for automatic instance:
db_name=TRAINEE
db_unique_name=CsFz_tspitr_TRAINEE
compatible=11.2.0.0.0
db_block_size=8192
db_files=200
sga_target=280M
processes=50
db_create_file_dest=/tmp
log_archive_dest_1='location=/tmp'
#No auxiliary parameter file used
starting up automatic instance TRAINEE
Oracle instance started
Total System Global Area     292933632 bytes
Fixed Size                     1336092 bytes
Variable Size                100666596 bytes
Database Buffers             184549376 bytes
Redo Buffers                   6381568 bytes
Automatic instance created
List of tablespaces that have been dropped from the target database:
Tablespace TEST1
contents of Memory Script:
# set requested point in time
set until logseq 706 thread 1;
# restore the controlfile
restore clone controlfile;
# mount the controlfile
sql clone 'alter database mount clone database';
# archive current online log
sql 'alter system archive log current';
# avoid unnecessary autobackups for structural changes during TSPITR
sql 'begin dbms_backup_restore.AutoBackupFlag(FALSE); end;';
executing Memory Script
executing command: SET until clause
Starting restore at 16-OCT-13
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: SID=81 device type=DISK
channel ORA_AUX_DISK_1: starting datafile backup set restore
channel ORA_AUX_DISK_1: restoring control file
channel ORA_AUX_DISK_1: reading from backup piece /oracle/product/11.2.0/dbhome_1/dbs/c-332232391-20131016-09
channel ORA_AUX_DISK_1: piece handle=/oracle/product/11.2.0/dbhome_1/dbs/c-332232391-20131016-09 tag=TAG20131016T144951
channel ORA_AUX_DISK_1: restored backup piece 1
channel ORA_AUX_DISK_1: restore complete, elapsed time: 00:00:01
output file name=/tmp/TRAINEE/controlfile/o1_mf_95wbkpvj_.ctl
Finished restore at 16-OCT-13
sql statement: alter database mount clone database
sql statement: alter system archive log current
sql statement: begin dbms_backup_restore.AutoBackupFlag(FALSE); end;
contents of Memory Script:
# set requested point in time
set until logseq 706 thread 1;
# set destinations for recovery set and auxiliary set datafiles
set newname for clone datafile 1 to new;
set newname for clone datafile 7 to new;
set newname for clone datafile 2 to new;
set newname for clone tempfile 1 to new;
set newname for datafile 6 to
"/oracle/oradata/TRAINEE/datafile/o1_mf_test1_95w9fln9_.dbf";
# switch all tempfiles
switch clone tempfile all;
# restore the tablespaces in the recovery set and the auxiliary set
restore clone datafile 1, 7, 2, 6;
switch clone datafile all;
executing Memory Script
executing command: SET until clause
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
renamed tempfile 1 to /tmp/TRAINEE/datafile/o1_mf_temp_%u_.tmp in control file
Starting restore at 16-OCT-13
using channel ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: starting datafile backup set restore
channel ORA_AUX_DISK_1: specifying datafile(s) to restore from backup set
channel ORA_AUX_DISK_1: restoring datafile 00001 to /tmp/TRAINEE/datafile/o1_mf_system_%u_.dbf
channel ORA_AUX_DISK_1: restoring datafile 00007 to /tmp/TRAINEE/datafile/o1_mf_undotbs2_%u_.dbf
channel ORA_AUX_DISK_1: restoring datafile 00002 to /tmp/TRAINEE/datafile/o1_mf_sysaux_%u_.dbf
channel ORA_AUX_DISK_1: restoring datafile 00006 to /oracle/oradata/TRAINEE/datafile/o1_mf_test1_95w9fln9_.dbf
channel ORA_AUX_DISK_1: reading from backup piece /tmp/1iomi9rv_1_1
channel ORA_AUX_DISK_1: piece handle=/tmp/1iomi9rv_1_1 tag=TAG20131016T144935
channel ORA_AUX_DISK_1: restored backup piece 1
channel ORA_AUX_DISK_1: restore complete, elapsed time: 00:00:15
Finished restore at 16-OCT-13
datafile 1 switched to datafile copy
input datafile copy RECID=11 STAMP=828975325 file name=/tmp/TRAINEE/datafile/o1_mf_system_95wbkybb_.dbf
datafile 7 switched to datafile copy
input datafile copy RECID=12 STAMP=828975325 file name=/tmp/TRAINEE/datafile/o1_mf_undotbs2_95wbkycy_.dbf
datafile 2 switched to datafile copy
input datafile copy RECID=13 STAMP=828975325 file name=/tmp/TRAINEE/datafile/o1_mf_sysaux_95wbkybz_.dbf
contents of Memory Script:
# set requested point in time
set until logseq 706 thread 1;
# online the datafiles restored or switched
sql clone "alter database datafile 1 online";
sql clone "alter database datafile 7 online";
sql clone "alter database datafile 2 online";
sql clone "alter database datafile 6 online";
# recover and open resetlogs
recover clone database tablespace "TEST1", "SYSTEM", "UNDOTBS2", "SYSAUX" delete archivelog;
alter clone database open resetlogs;
executing Memory Script
executing command: SET until clause
sql statement: alter database datafile 1 online
sql statement: alter database datafile 7 online
sql statement: alter database datafile 2 online
sql statement: alter database datafile 6 online
Starting recover at 16-OCT-13
using channel ORA_AUX_DISK_1
starting media recovery
archived log for thread 1 with sequence 702 is already on disk as file /oracle/product/11.2.0/dbhome_1/dbs/arch1_702_807275402.dbf
archived log for thread 1 with sequence 703 is already on disk as file /oracle/product/11.2.0/dbhome_1/dbs/arch1_703_807275402.dbf
archived log for thread 1 with sequence 704 is already on disk as file /oracle/product/11.2.0/dbhome_1/dbs/arch1_704_807275402.dbf
archived log for thread 1 with sequence 705 is already on disk as file /oracle/product/11.2.0/dbhome_1/dbs/arch1_705_807275402.dbf
archived log file name=/oracle/product/11.2.0/dbhome_1/dbs/arch1_702_807275402.dbf thread=1 sequence=702
archived log file name=/oracle/product/11.2.0/dbhome_1/dbs/arch1_703_807275402.dbf thread=1 sequence=703
archived log file name=/oracle/product/11.2.0/dbhome_1/dbs/arch1_704_807275402.dbf thread=1 sequence=704
archived log file name=/oracle/product/11.2.0/dbhome_1/dbs/arch1_705_807275402.dbf thread=1 sequence=705
media recovery complete, elapsed time: 00:00:01
Finished recover at 16-OCT-13
database opened
contents of Memory Script:
# make read only the tablespace that will be exported
sql clone 'alter tablespace TEST1 read only';
# create directory for datapump import
sql "create or replace directory TSPITR_DIROBJ_DPDIR as ''
/tmp''";
# create directory for datapump export
sql clone "create or replace directory TSPITR_DIROBJ_DPDIR as ''
/tmp''";
executing Memory Script
sql statement: alter tablespace TEST1 read only
sql statement: create or replace directory TSPITR_DIROBJ_DPDIR as ''/tmp''
sql statement: create or replace directory TSPITR_DIROBJ_DPDIR as ''/tmp''
Performing export of metadata...
   EXPDP> Starting "SYS"."TSPITR_EXP_CsFz":
   EXPDP> Processing object type TRANSPORTABLE_EXPORT/PLUGTS_BLK
   EXPDP> Processing object type TRANSPORTABLE_EXPORT/TABLE
   EXPDP> Processing object type TRANSPORTABLE_EXPORT/POST_INSTANCE/PLUGTS_BLK
   EXPDP> Master table "SYS"."TSPITR_EXP_CsFz" successfully loaded/unloaded
   EXPDP> ******************************************************************************
   EXPDP> Dump file set for SYS.TSPITR_EXP_CsFz is:
   EXPDP>   /tmp/tspitr_CsFz_17454.dmp
   EXPDP> ******************************************************************************
   EXPDP> Datafiles required for transportable tablespace TEST1:
   EXPDP>   /tmp/TRAINEE/datafile/o1_mf_test1_95wbkyck_.dbf
   EXPDP> Job "SYS"."TSPITR_EXP_CsFz" successfully completed at 14:56:02
Export completed
contents of Memory Script:
# shutdown clone before import
shutdown clone immediate
executing Memory Script
database closed
database dismounted
Oracle instance shut down
Performing import of metadata...
   IMPDP> Master table "SYS"."TSPITR_IMP_CsFz" successfully loaded/unloaded
   IMPDP> Starting "SYS"."TSPITR_IMP_CsFz":
   IMPDP> Processing object type TRANSPORTABLE_EXPORT/PLUGTS_BLK
Removing automatic instance
Automatic instance removed
auxiliary instance file /tmp/TRAINEE/datafile/o1_mf_temp_95wblk08_.tmp deleted
auxiliary instance file /tmp/TRAINEE/onlinelog/o1_mf_3_95wblj14_.log deleted
auxiliary instance file /tmp/TRAINEE/onlinelog/o1_mf_2_95wblhn8_.log deleted
auxiliary instance file /tmp/TRAINEE/onlinelog/o1_mf_1_95wblh8q_.log deleted
auxiliary instance file /tmp/TRAINEE/datafile/o1_mf_sysaux_95wbkybz_.dbf deleted
auxiliary instance file /tmp/TRAINEE/datafile/o1_mf_undotbs2_95wbkycy_.dbf deleted
auxiliary instance file /tmp/TRAINEE/datafile/o1_mf_system_95wbkybb_.dbf deleted
auxiliary instance file /tmp/TRAINEE/controlfile/o1_mf_95wbkpvj_.ctl deleted
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of recover command at 10/16/2013 14:56:16
RMAN-06963: Error received during import of metadata
RMAN-06961:    IMPDP> ORA-39123: Data Pump transportable tablespace job aborted
ORA-01565: error in identifying file '/oracle/oradata/TRAINEE/datafile/o1_mf_test1_95w9fln9_.dbf'
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3

Hi,
Cloud you please cheek below link:
ORACLE Cookies: TSPITR to recover a dropped tablespace
Thank you

Want to change default border setting for inserted subreports

hi -- When I insert a subreport into a main report, its default borders (all 4) are set to single. I want them all to be
None... and I've read that the default is None. But that's not what I'm getting.
How can I change the default border setting / restore it to what it's supposed to be?
Thanks,
Carol

This has been a development request of mine for years. Currently there is no way to default the borders to None.
-Dell

Unable to restore default newtab setting

Similar Messages

Maybe you are looking for