Unable to restore older dates after Lion install in IMAC

I see the pink bars on the time machine page going back to 2008. However, only the last 4 days are "filled in". I recently upgrader to Mac 10.7 Lion from SL.  There was no problem doing the restore on my MacbookAir.  I am unable to use the non-pinked tabs, How do I access the older Mac restores??? Any help would be much appreciated.

I´ve the same problem with FW 30, but I made my backup in the same language (german)as I got the new FW. When I start the backup it starts normally but stops by 50%. Fortunately I can restore it to my N82 and make from there a bluetooth restore. But it schould´nt be the normal way.

Similar Messages

  • Facetime reverted back to older version after Lion install.

    I purchased Factime from App Store and after upgrading to Lion OS, it has been reverted back to Version 1.1. App store is asking me to purchase it back again to upgrade it to V 1.2. Does it mean for every bug fix and version upgrade i have to pay apple $1.03.

    lol what are you talking about? The one with LION is 1.1 The one in the app store right now is 1.02 not 1.2
    Anyway, you can always download the app again anytime as long as you purchased it once. (though the button said buy, but dont worry, they wont charge you again).
    Though if you have Lion, it wont let you reverse back to the older version of 1.02 since you have 1.1

  • Unable to restore iCal data after total loss due to iCloud

    I believe iCloud is the cause for all my iCal data dissapearing. I have time machine running but am still not able to restore my iCal Data. I can not find the iCal data in the TimeMachine. Any suggestions?

    iCal data can be found in the Time Machine backups here: ~/Library/Calendars
    Find this folder in your Time Machine interface, choose it, click "Restore" and then "Replace" when prompted.
    When you exit Time Machine and go back into iCal all the entries should look the same as the day you chose to restore them from.
    If you don't have a backup.......sorry. There's no magic trick to bring it back. I've noticed that the preferred order of operations for first time iCloud syncing goes like this:
    Set up iCloud on iPhone, iPad, or iPod touch
    Log in at iCloud.com and make sure everything is correct on the site.
    Set up iCloud on your Mac/PC.
    No iOS device? Just make sure you have a backup or you export the calendars to a safe place before setting up iCloud on your computer. You may need to import your backups after the initial iCloud sync.

  • Will i lose my data after re-installing my iphone ?

    Last night i updated my iphone and i was unaware that its not a Factory Unlock cellphone. Now my iphone got locked. Will i lose my data if i re-install ios or can i restore my data after re-installing ? Please help as i dont wana lose my data. 2nd i dont have backup of my data too

    If there was a backup created prior to doing the update this will be available to you after the update .
    If you did not backup the data to itunes, there may have been a back up created in icloud.
    Without a created back up from either icloud or itunes your data will be lost.

  • Have an original iPhone 3G. Can you still sync iTunes (10.6) and Contacts after Lion install?

    Have an original iPhone 3G. Can you still sync iTunes (10.6) and Contacts after Lion install?

    An older iTunes will not open the library once used by a newer version.
    iTunes 10.6.3 will work with iOS6 as long as the hardware doesn't post-date the release of 10.7  Use iTunes 10.6.3 on both machines.
    iTunes 10.6.3.25 - http://support.apple.com/kb/DL1575

  • My MacBook Pro is running very hot after lion install.  Are there any hardware changes that will help? What can I do to get it back to normal?

    My MacBook Pro is running very hot after lion install.  Are there any hardware changes that will help? What can I do to get it back to normal?

    I get the impression that most of the users on older hardware experiences similar temperature issues on Lion for a long time now. Awaiting for confirmation from the original poster.
    In the meantime I'm just cautious with regards to pushing the machine to such extreme temps, since something tells me such behaviour which includes monitor flickering and the likes is nothing but abnormal for any type of use...
    Any clues if 10.7.5 does anything on this? If not I'm afraid i see myself going back to SL for good...

  • Time Machine not working after Lion install

    After Lion install at first Time Machine would not back up-then it did, but backed up the entire HD-now Time Machine will no longer function in trying to retrieve any data from Mail or anything else

    After consulting with maker of back up drive (LaCie) I opted to format the drive. Lost some stuff but nothing critical. I then backed up and now all appears to be working, i.e drive is backing up and Time Machine is now functioning.

  • Tie Machine  no longer backs up after lion install

    After Lion install, Time Machine no longer backs up-will start to back up but freezes after a few kb's-spinning clock will spin 24/7 but backup is stalled

    See the green box in #D2 in Time Machine - Troubleshooting.

  • I want to restore my data after my pad was reset, but the latest backup was 5 months back. What can I do?

    I want to restore my data after my pad was reset, but the latest backup was 5 months back. What can I do?

    There is nothing that you can do. If you don't have a more recent backup, you can't magically create a current backup now. You can use the 5 month old backup, or simply start all over again. You can download most of your purchased content again as long as you use the same Apple ID that you used to make the purchases.

  • No sound in garageband after Lion install.

    No sound in garageband after Lion install, can anybody help please?

    12 hours ago my midi played through Garageband with no problems. Today it does not play. The Garageband window shows that the keys are being played.
    In the moments following I turned on iTunes and all was fine so I burned a disc in my usual factory installed burner, late 2008 iMac, and the message was "no disc burner found". I turned iTunes on and off and same message. Ran Disc Utility and no flags. I am using the Disc Utility that is on my desktop. Is there a hidden Lion disc utility? Nothing worked unless there is a hidden function.
    I was able to burn using Toast. This would indicate that the problems is with iTunes 10, OS 10.7.1

  • Netflix plug in error after lion install

    What is the fix for Netflix plug in error after lion install?

    I reinstalled the plugin from a Netflix email, still get this problem:
    I don't have private browsing on, by the way.

  • Has anyone been unable to restore their iPad after attempting to upgrade to ios5? error 1

    Has anyone been unable to restore their iPad after attempting to upgrade to ios5? I get an unknown error 1 message. Thanks.

    I have the same problem. Something happened during the download and froze iTunes. After spending three days searching these forums with the dead iPad, the only thing I got to work was to try downloading iOS 5 using my sons computer. This worked. However I cannot now get my computer's iTunes to sync with my iPad.. It contains the same error message (1602) and has the same problem as before. It is not an antivirus problem. I need some help too

  • Security and privacy system preferences not working after Lion install.  What to do?

    Security and privacy system preference not working after Lion install.  Not sure if it happen with Lion installer or after updating. What to do?

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
    These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
    Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
    Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
    Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Terminal in the page that opens.
    When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” (without the quotes) and press return. You should then get a new line ending in a dollar sign.
    Step 1
    Copy or drag — do not type — the line below into the Terminal window, then press return:
    kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
    Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.) You can omit the final line ending in “$”.
    Step 2
    Repeat with this line:
    sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|edu\.mit|org\.(amavis|apache|cups|isc|ntp|postfix|x)/{print $3}'
    This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
    Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
    Step 3
    launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}'
    Step 4
    ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
    Important: If you synchronize with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
    Step 5
    osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
    Remember, steps 1-5 are all drag-and-drop or copy-and-paste, whichever you prefer — no typing, except your password. Also remember to post the output.
    You can then quit Terminal.

  • I can't find iSync after lion install

    I can't find iSync after lion install. I try too sync with my N8 Nokia. The program iSync dont appear in program mapp.

    It's Apple's software not yours and as shown by it's exclusion on the OS X Lion pages is not part of the new OS. Upgrading to Lion is optional.
    It's a trivial matter to copy it back from your Snow Leopard backup, but using it under Lion is not supported at all and WILL stop working sooner or later.
    Why would it be sensible for Apple to include software in their new OS that they know will stop working?

  • IPhoto 8.1.2 Double Library File After Lion Install

    Hi, After Lion install I'v got a double iPhoto Library File in iPhoto 8.1.2 whil I have only one library.
    Is this normal ? Is there a way to get rid of one of the two files or to combine them ? On other Macs only one file shows up.
    See screenshots.
    In the Finder only one iPhoto Library appear in the images file.
    This is the content of the IPhoto Library package :

    That's an issue with the Dock. I would trash the Dock caches. I would post on the Using Mac OS X forum for more on that.

Maybe you are looking for

  • Colorized Grayscale Images Do Not Print Correctly

    Hi, we're having trouble getting proper color output when we colorize grayscale TIF files in InDesign. We have just a couple basic grayscale TIF files, no transparency, saved with or without embedded profiles (Dot Gain 20%). We add a foreground and b

  • How to make a clip play backwards in timeline and how to reverse a clip from left to right?

    I would love to know if it is possible to: 1. make a clip play backwards in the timeline 2. reverse the orientation of a clip from left to right Thanks in advance.

  • Error in SharePoint PPS Dashboard Designer while connect Analysis Service.

    Hi, I am getting below error in SharePoint PPS Dashboard Designer. "An error occurred connecting to this data source. Please check the data source for any unsaved changes and click on Test Data Source button to confirm connection to the data source."

  • ABAP database not available through R3trans

    Dear all,   i have this problem while start the data base. but sap is going to up. i am able to logon also. but why i am getting this mgs. this problem is coming after update the kernel 640 path 21 to 221 . Please let me know how to resolve this Rega

  • Error while starting mds - MDM 5.5

    Hello all, I have installed MDM 5.5 on Unix/Oracle environment. I am not able to start mds as the system detects that it is already running. However, I see no mds process running. When I give the command mds stop, the system gets hung. Please let me