Unable to restore or update ipod nano (1st gen)

hello, I just upgraded to itunes 7 and it told me there is an update to 1.2 for the ipod. I cannot get it to update. as soon as I click update, the "do not disconnect" message disappears from the ipod and eventually it goes to sleep. The computer says "updating ipod." I have left it on all night with no change.
Things I have tried:
-the 5 R's (restore ipod didn't work, does the exact same thing as when I try to udate it.)
-changing the drive letter for the ipod.
-removing itunes completely for a fresh reinstall.
Can anyone help?

I have a similar problem and can't figure out how to
post a new topic =(
When I first got my iPod, I put a whole bunch of
songs on it (not nearly enough to fill it though).
Then I let my (now ex) boyfriend use it while he
worked out, and his friend attempted to add more
songs to it.. which deleted all my songs and replaced
them with his. Now I have it back and can't figure
out how to put my songs back on it. I don't really
want to delete all the songs he put on it, I just
want to put mine back on but I can't figure out how.
Please help, anyone?
hehe the only thing that is similar is that you have a problem too.
If you go into the options in itunes you can tell it to manually sync your ipod (do this before you plug your ipod in!) Then you can simply drag the songs from your library to your ipod to add them to what is already in your ipod.
Now to update the problem I posted about: I formatted the ipod from disk manager in winXP and now when I try to restore the ipod, itunes disconnects the ipod, reconnects it, and then does nothing but display a window that it is restoring the ipod. I don't get anything on the screen of my ipod except "Do not disconnect". I am going to try leaving it on all night.
The only thing different from what was happening before is that now it is reconnecting the ipod to windows after it disconnects it. From reading the instructions, however, I think I should be seeing a progress bar on my ipod.

Similar Messages

  • Restored Ipod Nano 1st gen. and nike + icons do not appear in itunes 7.0.2

    I have a ipod nano 1st gen. I recently purchased the nike+ reciever and shoes and they worked great. I had not problems installing the latest version of ipod software version 1.3.
    On my latest run I got soaked and the nike+ receiver stopped working after the rain. Waited a day until it dried out and reconnected it to my ipod and it did not recognized the receiver.
    I reset my ipod and it still did not recognized the receiver.
    I restored my ipod and it ereased the nike+ icons from my ipod and itunes. I updated my windows software and reinstalled itunes 7.0.2 in my computer and still the nike+ icons do not appear in my itunes and the updates indicate that I have the lastest version of the itunes and ipod software.
    What else can I do to reinstall the nike+ software in my ipod and itunes?

    Hi
    this is actually the nike plus forum for the 2nd gen ipod nanos that use nikeplus. You would getter a better response int he correct forum for 1st gen ipods at the link below.
    http://discussions.apple.com/forum.jspa?forumID=1123
    http://discussions.apple.com/forum.jspa?forumID=818
    Good luck
    GFF:)

  • IPod Nano 1st Gen not connecting to my computer

    My friend's iPod Nano 1st Gen won't connect to my computer (i have previsily added songs to it since last month) and now my iTunes won't show that ipod on my devices lists (I did NOT update iTunes because of the problems other people were getting)..... it will charge on my computer but WON'T sync....... WHATS UP WITH THAT???
    THANKS IN ADVANCE TO THOSE THAT HELP.

    Could be any number of reasons.  One of them just may be your refusal to update iTunes.  Just because others are having issues does not mean you'll have them! 
    iPod appears in Windows but not in iTunes 

  • Corrupted ipod nano 1st gen

    I have a corrupted Ipod nano 1st gen... and restoring the nano wont work at all... I cant find a single way to fix it...

    it shows a folder with a yellow triangle with a exlamation mark next to it and it also shows something saying corrupt on the bottom and the apple website on the bottom

  • Ipod Nano (1st gen) too loud!

    I cannot seem to set the volume of my nano to a LOWER volume setting - it is always too LOUD! It has all the updates. Can anyone help? Thanks

    I cannot seem to set the volume of my nano to a LOWER
    volume setting - it is always too LOUD! It has all
    the updates. Can anyone help? Thanks
    Thank you both for your great answers. I tried both your suggestions. They seem to work for some of the items, but not all - very weird.
    ipod Nano 1st gen Windows XP Pro

  • Ipod Nano 1st gen not working

    Hello all
    I have a Ipod nano 1st gen 2gb. I can restore it, reset it with menu select key, but everytime it starts it loads to the lanuage screen and i can not click to get further into the ipod, it use to work before i upgraded the firmware to the new 1.3.1. is there away to downgrade back to like 1.1.9. I am running vista 64 bit so i cant run the 32bit restore program to try that. If there is anythign anyone can think of that will be great. Yes i have reset it via the menu key and select key like 1000 times...

    I downgraded the nano from 1.3.1 to 1.1.1 then down to 1.0 and then back to 1.3.1 and still the same thing, no select function upon the Language Screen. Anyone have anything else i can try?

  • Ipod nano 1st gen not syncing

    My ipod nano 1st gen is not syncing properly. When I plug it in and itunes starts up, it begins the syncing process, but gets stuck midway through. I have it set to only sync checked songs and a specific playlist. Also, it still has enough memory. Cannot get it to sync and stays busy so long i cannot eject because computer is busy syncing! I've also tried to reset and restore, but it wouldn't restore because it was busy syncing!! Help please!

    I have the same problem. I have an Ipod Nano 1st generation that won't sync also. I tried downgrading Itunes version and that didn't work. I installed the latest Itunes and firmware but I'm still having the problem.
    The only solution I have found is to reset the ipod, then do a restore in itunes then run the sync. It works then once and you will need to do it again everytime you sync otherwise it won't sync. It is rather disapointing considering that the Ipod is supposed to be a premium product.

  • Apple may charge $100+ just to look at iPod Nano (1st gen)?

    I got the iPod Nano 1st gen replacement program email. My nano hasn't been working for quite some time, even when I plug it in to my computer so I figured this would be a great deal. I typed in the serial # online and Apple emailed me saying "Our initial diagnosis indicates that because your product replacement will likely be covered by the warranty, an AppleCare Protection Plan, or another Apple repair or exchange program, there should be no charge to you for the service performed. If we have questions or concerns regarding the repair coverage, we will notify you"
    After reading further into the email, it says that Apple might charge a diagnostic fee of $100 if the problem isn't battery related (*** kind of rip off is that?!). I'm pretty sure the battery is gone, but I don't know if I am willing to gamble $100 on it. I payed $200 for it in spring/summer 06 so it fits the Replacement Program criteria. Do they just expect people to be cool with the fact that they could be charged a bill for it? I know thewarranty is long gone but ****...makes me more skeptical about buying anything from Apple again. Should I send it in or just throw it away?

    see my thread about this..
    called the 800# about the same issue you have.
    see below:
    ***UPDATE****
    Spoke to APPLE SUPPORT
    They said that they are asking for these nanos as part of a replacement program.
    They assured me that the fee does NOT apply
    Replacements may be refurbished models
    Look for APPLE to provide updated customer communication
    thanks

  • For the iPod nano 1st gen replacement program what generation of iPod nano will it be replaced with?

    For the iPod nano 1st gen replacement program what generation of iPod nano will it be replaced with?

    8GB. Nice little unit when used by itself. BUT don't even think about connecting to any docks or other third party interfaces 'cause IT AIN"T GONNA WORK RIGHT!
    Both of my Pioneer car stereos have the same problem with both of my 6th generation iPod Nanos:
    The first time you connect the iPod, the radio recognizes the it and works. BUT THE NEXT TIME YOU TURN THE RADIO ON THE DISPLAY FREEZES. The only way to get it working is to disconnect the dock connector from the iPod and reconnect it. THIS ***** AND IS NOT THE WAY THESE UNITS BEHAVED WITH MY 1ST GENERATION NANO. Both of my new 6th generation ipods have been restored (several times) and have the latest firmware which, as of this writing is 1.2 and still the problem persists.
    My two Pioneer car stereos that don't work right with the iPod Nano 6th generation:
    Pioneer DEH-P4900iB
    CD-i200 iPod cable for above
    Scion XB iPod enabled head unit T1808
    I've made an AppleCare adviser aware of the problem but I doubt that this information will ever make it to engineering so I don't have much hope that this will ever be fixed.
    I would suggest that all 6th generation Nano users check it's compatibility with any third party interfaces they have and report their findings on this discussion board. Perhaps we can get Apple to FIX THIS SERIOUS PROBLEM.
    Apple are you listening??

  • Ipod nano 1st Gen

    I have an iPod nano 1st gen stuck in a restore loop. I have an iPod touch 4th gen and it has never happend to it. The nano just says restore to iTunes. Then I restore it but it kept going into "restore to Itunes". I am using Windows XP to restore it. I would use my MacBook but thats somewhere else.

    1st try reinstalling the latest version of iTunes.
    1. go to music, iTunes, iTunes Music, and then you should see all of the artists in your library. Move the iTunes Muic folder to your desktop.
    2. uninstall iTunes.
    3. Download and install the latest version of iTunes
    4. to restore your Library open the iTunes Music folder on your desktop and drag all of the srtists to your empty library.
    secondly, then try syncing your iPod to your new library
    hopefully this should work! :P

  • Hi I was just wondering, if my iPod nano's serial number says that it is eligible, but its screen is not working, am I still eligibile for the iPod nano 1st gen replacement?

    Hi I was just wondering, if my iPod nano's serial number says that it is eligible, but its screen is not working, am I still eligibile for the iPod nano 1st gen replacement?

    Yes. They'll still replace your iPod. Several users have indicated that they have returned damaged iPods and were still given a replacement iPod.
    B-rock

  • I have an iPod nano 1st gen. my system operative is windows vista . I just want to transfer all the music of my iPod to iTunes library like I was able to do it in the past I don't know what have change?

    I have an iPod nano 1st gen. my system operative is windows vista . I just want to transfer all the music of my iPod to iTunes library like I was able to do it in the past I don't know what have change?

    Thank you deggie to answer me . You know, I don't know much of computers and of technology but when I bought that ipod back when  they came out 2005 I was able to download music from my CDs and from Youtube to itunes then transfer to my ipod and back and forth to itunes .  Then if I had changed of computer I was able to transfer to that new computer.Why I'm not able to do it ? There is a program(Sharepod) that allow to do that but it cost $35.00 but I thought that was free or it is because that now I have to buy from itunes only?

  • Ipod nano (1st gen) not charging/not showing up on computer or itunes

    I recieved a 2GB ipod nano (1st gen) as a gift back in December 2005. It's worked fine until recently. Yesterday, I tried to charge my ipod. However, when I connected my ipod to my power adapter to charge it nothing happened. The charging symbol didn't even show on the screen. So then I tried plugging it in to my laptop computer. Same result: nothing happened and worse still, it didn't even show up on My Computer or in iTunes. I then tried connecting it to our regular computer. Same result as the laptop and still no charging icon. I tried my 2nd generation nano thinking that maybe something was wrong with the USB cable or with the power adapter but it worked fine with everything. I also tried another cable. But still nothing worked. I've tried the 5 R's thing but it didn't work. I even tried leaving my ipod alone for awhile to no result. Finally I tried putting it into Disk Mode and that's where it is now. I've tried to run through the steps again with this but it didn't work. So now it's in Disk Mode and it needs to be charged but I don't know how to do it. I'm starting to think that I just need to get the battery replaced. Unless someone else has a fix that will work?? Please help!!

    It sounds like the port or cable is having a problem. First try a different cable.
    If the cable doesn't fix things then try resetting the PMU (Power Management Unit) then see if the iPod will show up.
    MJ

  • Ipod nano 1st gen (not recognized by iTunes and won't resotre)

    My ipod nano 1st gen has been working fine up untilthis afternoon..I plugged it in as normal while running iTunes and I wanted to remove some music files t add new ones and all of a sudden it wasn't recognized by itUnes anymore, you can't resotre it on iTunes or manually and whenever I plugge it in the itunes shut down..
    It was working fine before that, I was able to add and remove songs on it..I also have Ipod Touch 5 that works fine no problems and UBS ports are ok as well (all other ubs devices work on them). I have the latest, newest version of Itunes instaled
    HELP
    Thank you

    Hey moni8181,
    If you are having an issue with your iPod nano not being recognized by your computer, I would suggest that you troubleshoot using the steps in this article - 
    iPod nano Troubleshooting
    Thanks for using Apple Support Communities.
    Be well,
    Brett L 

  • IPod Nano 1st Gen Replacement Program Problem

    I recently sent my iPod Nano 1st Gen off for the replacement program.
    I wanted to make sure I would be receiving a refurbished 1st Gen back, not one of the latest gens, so I called Apple Care to confirm this.
    I'm really fond of the 1st Gen and would like to keep it as a collectors item, plus mine was in relatively good condition as well (And absolutely love the scroll wheel).
    The woman I spoke to at Apple Care assured me that I would receive a refurbished 1st Gen iPod Nano, she was very clear on this.
    I sent off and just received a box in the mail with replacement. To my dismay, they replaced it with a 6th GEN.
    I don't want to sound ungrateful, and I do appreciate Apple keeping up customer service even for old Apple products.
    But I specifically asked if a 1st gen would be returned to me, which was not the case.
    I called Apple care again today, and they said they didn't have the stock and provided me with whatever they could.
    Had I been told there was a chance I wouldn't receive a refurbished 1st gen in return, I wouldn't have sent it off in the first place.
    Can't be too upset with Apple, but not particularly happy. Any advice would be appreciated.

    I just sent a request for the shipping materials today, and if I get back a refurbished 1st generation nano, I'll be more than happy to trade it for your 6th generation

Maybe you are looking for

  • Plz help me to design the system......Its very urgent

    Hi all members I have a problem and i am not able to start with the solution of this if all of u can help me to move with the solution of this problem I have to send the Java interfaces, and a brief write-up with assumptions and class-design. Challen

  • MacBook Pro (W8638) shuts down unexpectedly in both Safari & Firefox

    My 2006 MBP has worked well. The machine model is MacBookPro 1,2; 2.16GHz, Family name: A1151, screen size 17 inch, Memory DDR2-S-667 running OS 10.6.8 Snow Leopard. Two weeks ago it started shutting down unexpectedly. In three of the first four unex

  • How can I have small video embeds play full screen?

    I have a design with embedded videos (pulling from my photo album). In the design they fit inside other elements, often at a reduced size. When I tap them in a presentation, I'd like them to go full screed instead of playing at their "native" embed s

  • What are the roles & responsibilites of consultant in SAP upgradation or mi

    Hello , Would you please any dody help me to provide the role & responsibilities of consultant in SAP upgradation or migration project.Thanks. Regards, Sampally

  • BEx Analyzer error

    When trying to open the BEx analyzer, I get the following error: SAP_CMINIT3 : rc=20 > Connect to SAP gateway failed. I can access the Bex analyzer using the RRMX transaction. Waiting for your answer Thank you Ramona Leabu