Unable to restore screen when laptop goes into power saving mode
Toshiba Satellite M45 running MS Windows XP, When laptop goes into powersaving mode and screen goes black, if i do not move the mouse in a nanosecond I am unable to restore the screen. Try my ususal fix of pressing the now amber mechanical start button, but I only hear the computer start to whir, but the black screen continues. I have to do a hard close and consequently loose all unsaved data. Then do a mechanical start and return to the desk top with a message that the computer programs where not closed properly.
I have been told I need to change the power saving mode options. Is this correct? How do I do this? Thanks, Blooming
I tired to do a system restore for two different dates and got a message that MS was unable to restore to that/those dates. - no explanation.
Linda, sometimes the restore points get corrupted. The fix is to turn System Restore off and then on again. Unfortunately, that removes all the previous restore points.
How to turn off and turn on System Restore in Windows XP
You might try running the System File Checker.
Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)
-Jerry
Similar Messages
-
Monitor Goes into 'Power Saving Mode' HDMI
I have an LG monitor (IPS237-BN) which always goes into 'Power Saving Mode' when I connect my MacBook Air to it via a Thunderbolt-HDMI connection.
Sometimes it actually connects and I can mirror my displays (or count it as another), most of the time it doesn't. I have used different cables etc. I cannot install the driver because I do not have a CD drive.
Any help is appreciated, thanks!Hi,
Update the the video driver from the NVIDIA web site.
Your PC bios should be 5.29 or higher so that is something to check.
The Truckee motherboard was recalled but you might be past that date.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT -
I just purchased a new LG Computer Monitor from Best Buy today and hooked it up to my PowerMac computer. Shortly after setting it up, the entire screen image started sporadically shifting left and right a few pixels. And then, at seemingly random times, it'll shut itself down, going into power save mode. I checked the cables to make sure they were secure and they seem to be. Could there be some sort of interference that's causing it? Or would it be the graphics card? My computer is only a couple years old. Please help!
Do you have another computer you can plug the monitor into to test?
Adam
Best Buy Community - Retail, Americas
Forum Guidelines | Terms & Conditions | Community Guidelines | Blogging Guidelines
*Remember to mark your questions solved and click the star under the user's name to show your thanks! -
System locked into power saving mode
I have a A6000n tower with Vista home premium 32 bite system which was pre-loaded. The problem is the system is locked into power saving mode, the keyboard is not functioning,I have already tried other keyboards which all do not function!
I have tried to turn off and turn back on the system to be able to boot to a bootable startup disc but the system is frooze.
If anyone has had this type of problem and has had a correct approach to fix it please notify me A.S.A.P. ThanksHi,
Update the the video driver from the NVIDIA web site.
Your PC bios should be 5.29 or higher so that is something to check.
The Truckee motherboard was recalled but you might be past that date.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT -
How do i correct iphone that keeps going into power off mode
how do i correct iphone that keeps going into power off mode
The screen will flicker while in lock mode then the slide to turn off screen will appear. This happens without touching any button or screen.
-
Port flaps when PC is in Power saving mode
Hi Everyone
My Cisco LMS 2.6 installation reports a flapping port whenever a PC running Windows Vista Business is in power saving mode.
While this is not a major catastrophe, my syslog is filling up very quickly with more than 10,000 records within 24 hours.
Does anybody have any idea what to do? Is this problem solved with Windows 7?
Thanks.
- AndreWhenever a PC/Laptop goes into the following states:
1. Sleep mode;
2. Log on/log off; and
3. Powers on
You'll see in the switch logs four error lines: 2 to report layer 1 going down and up and 2 to report layer 2 going down and up.
This is normal. -
Macbook pro goes into power save mode with dell sp2208wfp monitor.
I have a macbook pro and am trying to connect it to a dell sp2208wfp monitor, I am using a hdmi cord and it goes straight to power save mode. My mac works on my roommates monitor and his PC works on my monitor but my mac doesn't work on my monitor. I've read the other forums and have found nothing. One guy suggested plugging the mac into a power source still nothing, any solutions before I try and sell this thing on craigslist?
Had the same issue a few months ago when I tried connecting to external monitor, it is only possible to run external displays from a Macbook Pro while the power cable is attached, if you try and connect to external display without having the charger attached the external display will flash your desk top for a second and then your Macbook Pro will go to sleep. Hence connect your charger every time you wish to connect to external display, its not a problem with your Macbook Pro, it's just the way of Apple. Hope that helps.
-
My computer keeps going to power saving mode and swithing off
''dupe of https://support.mozilla.org/en-US/questions/918076''
as abovei dont but I THOUGHT IT WAS A GENERAL HELP FORUM ......OBVIOUSLY i wasted my time
-
I have tried hitting the power button short and long, pushing every button, but it seems the only way out is pulling the power plug.
Thanks for any help.HI
This is a known issue and HP is working on Firmware to fix this issue. This will be released soon.
So please use the workaround for the time being if the printer goes to power saving mode.
regards
Mugu
---- If my answer was helpful please click the "Kudos" star.
If your problem is solved please click the "Accept as Solution" button ---->
Though I work for HP the post are of my own -
When trying to restore my Iphone it goes into recovery mode
I recent just upgraded my IPhone 4s to 5s. When I synced it to my computer it transfered eveything from my old phone to the new one which I didn't want. So when I tried to restore it to factory settings it went to recovery mode. I can get it out of recovery mode but it just goes back to way it was. How can I restore it with out going into recovery mode.
we have same problem bro .. i dont know what to do.
-
Why do I have a big Q on the upper left of my screen when i go into a text?
This is driving me crazy.. Why do I have a big Q on the upper left of my screen when i go into a text message? How do I get it off? Someone sent me a picture and I noticed it was on there also?
ME TOOO!! omg it's so annoying. I have only had this happen with an iphone 4, and i noticed it started happening after I did a text msg. usually it's just a big Capital "Q", in a similar position as it would be on the keyboard. but it stays on the screen. Now it also stays there even when i go to my home page or any other screen for that matter. I recently had my phone swapped out because my home button had worn out (uh oh....less than 6 mo old too!) but even on the new phone it's doing the "Q" thing too.
mine only goes away when i reboot. grrrrr. glad im not the only one tho. -
I am trying to set up a user account for my 3 year old so that when she goes into her account, only her games show up on her desktop. How??
yes -- I think I am setting it up right, but when I go into her account to check it, it doesn't work.
-
I think it's a Lion problem. I had this problem with an old Dell True Mobile wireless router, and hoped it would go away with a new Airport Express router. Same problem. I checked online and saw a lot of message boards featuring questions from people that suffered the interruption of their wi-fi connection, some with Macbooks others with iMacs like me. The problem happens when I don't use the computer for a few minutes. It goes into the Idle mode, kind of like sleep. The connection is severed and the time clock upper right stops. It's weird. There was supposedly an Apple update that addressed this issue, so at the Genius bar two days ago I updated to 10.7.3, downloaded and installed the update. Didn't work. Is it Lion? Is it a wireless card issue? Very frustrating. I subitted a genius bar work authorization with another Apple Genius Bar support tech the next day. He ran some tests. Cryptically said he knew that Apple knew about this and was working on a solution but couldn't tell me what it was. Submitted my info and said I'd be contacted by an Apple tech within 48 hours and provided with a link to another download of another update that should "fix" the problem. I don't know what to do.
I FINALLY SOLVED THIS ISSUE!!!!
New routers have "mixed" modes for your network; this means that it will automatically choose the best option between wireless-B, wireless-G and wireless-N network modes. I used to experience this issue using the 2.4 GHz. mixed mode wireless network.
Thankfully, my router can create 2 networks: a 2.4 GHz. network and a 5 GHz. network.
When I randomly changed this value to "use only wireless-B and wireless-G" trying to fix an issue with a wi-fi expander, the iMac wi-fi issue dissapeared! I tried it with wireless-N only, but it didn't work.
So, finally, I have a 2.4 GHz network with only wireless-B and wireless-G modes which works PERFECT with the iMac, and a 5 GHz. network with a mixed* wireless mode for everything else mode.
*PD: by "mixed" mode it means that the router will automatically choose between B, G and N network modes as it fits better. -
The headteacher has just upgraded his Ipad to I07 and when he goes into the school shared calendar any all day events come out red and then other events on that day are obscured as the red covers the whole day
I have the same proble. In all views all day events don't show up. If I search for the event, there is a result but it does not appear in the calendar.
-
Problem establishing login screen when ethernet plugged into NetComm NB5Plu
Problem establishing login screen when ethernet plugged into NetComm NB5Plus4
I get a flashing folder that does not allow the login page to appear.
If I remove the ethernet connection then boot-up the system establishes the login page and I can plug the ethernet back in and the system logins in.
Where should I look to identify the problem, I am thinking it is the OS X install.
Regards
SiHi hoydj,
It might be a driver problem. Check out this FAQ from Wacom's Knowledge Base:
http://www.wacom.com/faqs/knowledge_search.cfm?id=335
Maybe you are looking for
-
Sharepoint 2013 + Windows Server 2012 as reverse proxy
Hello All - I'd like to ask if anyone has any experience with the new Windows Server 2012 (reverse) proxy, in providing a single sign-on service to Sharepoint 2013. Scenario: My client has a Sharepoint 2013 with 3 web applications (portal, teamsites,
-
Hi everyone, I hope someone can help me. I am struggling to understand how to record the output of my MIDI synth (MOTIF ES-8) into a track in Logic. I have the Martin Sitter videos and books, but he doesn't seem to address this particular (and probab
-
Receiver Component Empty in RWB
Hi, what does it mean if the Receiver Component shows Empty in RWB under message monitoring. thanks.
-
TS1627 "HTTP/1.1 503 Service Unavailable" What is this error message
I can'tnot sync my ipad cal with my mac?? This is the message I get any suggestions
-
Installing Grid Control - Solaris - Containers - VM(Veritas)
I need to know how and where I can start to learn how to install Grid Control using Solaris with containers, and Veritas VM to create and mantain filesystems. Please help. Paola. @}-->-->>-----