Unable to restore the snap shoot of ZFS

Hello Gurus,
I have taken the snapshoot of soalris 10 machine and moved to the another machine.
and i need to restore it on one disk disk so i have removed old disk in esx server presented one new lun and.
started installation and stoped in between of instllation after the lable of disk.
I have reboot it booted from Cd exit instllation.
When i tried to mount the nfs snap from remote system i am getting the rpc timeout error.
Please help me.

Have you tried zfs send | zfs receive of the snapshot ( I'm assuming it is in a file format )? How did you save the snapshot?
Edited by: mdinaz on Apr 7, 2010 8:20 AM

Similar Messages

HT5654 I had an PC crash while backing-up my iPhone4, before installing iOs7. Now I am unable to restore the iPhone. Can anyone please help me! Arjen Ronhaar

I had an PC crash while backing-up my iPhone4, before installing iOs7.
Now I am unable to restore the iPhone.
Can anyone please help me!
Arjen Ronhaar

Hey Arjen Ronhaar,
Thanks for the question. I understand you are experiencing issues updating your iPhone to iOS 7. If you have not already done so, you may want to restart or reset the iPhone:
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/HT1430
If the above steps do not resolve the issue, you'll want to restore your iPhone in recovery mode with iTunes:
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
Thanks,
Matt M.

I have the latest iTunes 12.1.2.27. However, I am unable to restore my iphone4s. iTunes was able to detect an iPhone in recovery mode. The error is something like "Unable to restore the iphone. Make sure you have the latest iTunes and try again."

I have the latest iTunes 12.1.2.27. However, I am unable to restore my iphone4s. iTunes was able to detect an iPhone in recovery mode.
The error is something like "Unable to restore the iphone. Make sure you have the latest iTunes and try again." This is the latest version that exists currently.
I am using MAC OS X 10.7.5.
Please advise.
I have tried all the steps in the apple support.

There is nothing to backup.
If the device is showing the Connect to iTunes screen, there is nothing on the device to backup.
The first step in the update process is a backup... restore the device using that backup and try again.

HT201413 Went to update iPh6 iOS8 and now I am unable to restore the phone (iTunes is current)...I have restarted both my MacBook and iPh to no avail. I am getting Error 17

I went to update my iPh6 iOS8 and now am unable to restore the phone (btw, iTunes version is current)...I have also restarted both my MacBook and iPh to no avail. I am consistently getting 'Error 17' when I try to perform the update. Thank you if you can help!

Hello MickeyMcR,
The article linked below details a number of steps that can help get your iPhone restored.
Error 3194, Error 17, or "This device isn't eligible for the requested build"
https://support.apple.com/en-us/HT201442
Sincerely,
Allen

Unable to restore the iphone

Hi Guys i have come accross a situation that i am not able to update the iphone from 3.0 to 3.1 get error unable to restore the Iphone tried to restore under the recovery mode dose not help all the time it comes up with freeking unknown error 3014.
if u have any kind of recon mail me at [email protected]

Hi,
This article: http://support.apple.com/kb/TS1275 provides general tips that will resolve most update and restore issues.
Also, this thread: http://discussions.apple.com/thread.jspa?threadID=2104432 discusses that specific message and provides a work around.
-Jason

Unable to restore the previous settings of my iPhone4

I was unable to restore the previous settings of my iPhone4. An error message appeared when I sync it with the iTunes.

RatVega has provided good detailed directions.
I like to also have the concept in hand, so I can "re-derive from fundamental principles" when needed. [That's just a euphemism of "over-thinking", which I do a lot.]
That concept is: The drive on the desktop is an Icon. Like any other icon, including Files and Folders, it can be renamed by clicking on the name and re-typing a name, or using GetInfo and typing in the larger and more convenient name-box. Once renamed in this fashion, "It works the way it ought to work."

Unable to restore the back up data

i have upgraded the to OS10, just before that I did took the back up ...even though i am able to see the back up folders in the Blackberry link, after restore device->full restore (even custom restore)..the Option "RESTORE" is not available for selection...when i click on the details it says "the blackberry ID associated with the backup file is not matching the blackberry id on the device"......please help

Do the software update on the new iPhone so you have iOS 7.0.4 and then restore the old backup.

Unable to restore the Azure SQL DB

Hi Team,
We have two Azure SQL DBs hosted in Azure. The details are below:-
1. DB1 [Standard S2 250 GB] hosted on SQL server 11.0.9230 behind the scenes.
2. DB2 [Standard S2 250 GB]
hosted on SQL server 13.0.15 behind the scenes.
And we have tried to restore the DB1 onto DB2 and it is failed with the Error "Partner server 'SQL1' is not compatible with server
'SQL2'"
Please help on how to resolve this without service interruption.
Regards,
Subhash Konduru
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

Hi Peh,
Can you tell me what is the Downtime needed for this upgrade & what will be the impact?
Regards,
Subhash Konduru
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

The google feeling lucky app from the address bar is not working, a program called vshare performs a search instead and I am unable to restore the original function. please help

I do not know how but vshare, has been performing a search everytime I type something in the address bar that is not a complete website i.e. facebook instead of facebook.com
this is very annoying and I am unable to uninstall vshare, I have even tried uninstalling firefox and reinstalling it

I had this problem too, and just fixed it, and found a great website that helped.
1. In Firefox type about:config in the address bar and press ENTER.
2. Locate and double-click the entry for keyword.URL
3. Set the value based on which search provider you would like to use for your address bar searches. Here are a few search strings you can use.
Yahoo: http://search.yahoo.com/search?p=
Ask: http://www.ask.com/web?q=
Google: http://www.google.com/search?&q=
ChaCha: http://search.chacha.com/search/query?searchwithguide=0&query=
source: http://www.technipages.com/firefox-change-address-bar-search-provider.html
And if you want the I'm Feeling Lucky search, instead of just the Google page search, then put:
http://www.google.com/search?ie=UTF-8&oe=UTF-8&sourceid=navclient&gfns=1&q=
instead of: http://www.google.com/search?&q=
I just did that, and it worked for me. I had to go through a bunch of the different options, but I found one that worked.
Source: http://www.google.com/support/forum/p/Chrome/thread?tid=25cf5ea2bc5a2744&hl=en

HT4500 The Genius Bar wiped my hard drive (10.7.2) and I have since been unable to restored the backup from my Time Machine

I followed these steps from this article;
In Finder, press Command-Shift-U.
Double-click Migration Assistant.
Click "Continue" and enter an administrator name and password when prompted.
Select the "From a Time Machine backup or other disk" option, then click "Continue".
Select your Time Machine backup disk or Time Capsule (enter the user name and or password if prompted), then click "Continue".
Having selected the correct disk nothing happened, other than the word "connecting" appeared. After some time this also appeared. "The backup disk image “/Volumes/Ross Backup Data/Ross’s iMac.sparsebundle” could not be accessed (error -1)". I tried both with the Time achine connected wirelessly and via Ethernet, with the same result.
Select the Time Machine backup you would like to restore (such the most current one you just made), then click "Continue".
Select Items to Migrate, then click "Continue". Note: The "Continue" button will be dimmed until the "Calculating…" stage is complete.
Any ideas please?

How big is your Time Machine image? If it's really big (eg, several hundred gigs), it can take a lot of time to calculate the time needed to restore it onto your Mac. This said, I'm still on SL, so maybe you have to reinstall Lion from the restore partition first, then migrate your personal stuff from the Time Machine image.
Additionally, you'd be better served if you posted this thread in the Lion part of the forum...

Unable to restore the 'go to' button on my X3-02 s...

Just bought an X3-02 and started personalising the phone. At the bottom of the screen are three touch buttons. Mine came with "Go To" on the left, "Menu" in the middle and "Facebook" on the right. I managed to change the left button to "Bluetooth" but then found out I couldn't set the right button to "Go To" as I had intended. Now I can't find any way of restoring "Go To" to either the left or the right button. Can anyone help?

Try a Factory Reset..(Menu-->Settings-->Restore Factory settings-->SETTINGS ONLY).. followed by 12345 ...or the one if you have set your own security code..
Though it should not erase any data.. a back-up is always recommended...
--------------------------------------------------------------------------------------------------------------------------------------------------------------If you find this helpful, pl. hit the White Star in Green Box...

Unable to restore the backup

Sir/Madam,
I Had recently upated the Blackberry Q5 device with OS version 10.3.1.2576 & Software Release 10.3.1.1779. But unfortunately my backups did not get restored. Every time it shows error as "Restore Failed".
I have also taken backup last on 20-07-2015 and i have a backup file on my PC too but am not able to extract these data and restore it to my device. Kindly help tURGENTLY to resolve my issue since all the data is lost. Also you can mail me the guidelines to resolve this issue at my below email address.
Thanks
Jatin
[removed personal information]

First of all i thank you for your valuable reply. Am still not able to restore my backup. I had only updated the software and not the device. The details which i extracted from the BBB file are as follows :- <?xml version="1.0" encoding="UTF-8" ?>- <BlackBerry_Backup> <Version>4.0</Version> <Client platform="windows" osversion="Microsoft Windows NT 6.1.7600.0" dtmversion="1.2.3.56" />- <SourceDevice pin="2B2C2E3F" hwid="86002A0A" revision="2"> <Platform type="QNX" version="10.2.1.3442" /> </SourceDevice>- <QnxOSDevice> BlackBerryBackupFormatV2.0.0Research In Motion Please help me to resolve this issue at earliest. Also can you guide me for how to extract the BBB data and restore it.

Unable to Restore Database

We are attempting to migrate from an older windows platform to a Windows 2008 platform. The old configuration had two disk drives, and Oracle Express was installed on E: - the new server, being virtual has been configured with only the C: drive.
I've been reading up on RMAN, and have confirmed that the daily backup process on the old server does create an RMAN backup.
I've installed (and several repeat uninstall/installs) a copy of Oracle Express 10g in the default location, accepting all defaults except for my password (which is irrelevant under RMAN).
I've duplicated the directories, I've figured out how to restart the database so I don't have to reinstall, but I am unable to restore the application database. I'm not eager to use other utilities than RMAN, since learning RMAN has already taken up more time than is budgeted for this task.
I receive varying error messages, depending on the techniques I try to use. Usually I receive this closing message:
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of startup command at 12/14/2010 13:39:24
RMAN-04014: startup failed: ORA-02778: Name given for the log directory is invalid
The other message I receive is the following or a variation on the theme:
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at mm/dd/yyyy hh:mm:ss
RMAN-06564: must use the TO clause when the instance is started with SPFILE
The second message is a direct response to the following:
rman target /
startup force nomount;
run
{set controlfile autobackup format for device type disk to 'c:\backup\oracle\XE_%F';
# use 'c:\oraclexe\app\oracle\product\10.2.0\server\database\SPF2FILE_%F'
RESTORE SPFILE FROM AUTOBACKUP;
I have no clue how to specify correctly that the SP2FILE.ORA file is the backup of the control file (can provide the script to create the backup if you think it will help, which runs a series of logs to capture settings and then executes the backup.) The backup process was inherited and I cannot explain why the default RMAN process is not being used to create the backup. However, I've been unable to use the default RMAN output to restore on a different server, as well.
Please help - this task is now very late, and I'm not even sure whether I'm asking the correct questions to solve the problem(s) I'm experiencing.

I'm not sure what you mean by the instance 'status'. I install a fresh copy of Oracle Express 10g. Copy over the backup files for the database and logs, copy over the SPFILE..., and attempt to restore, with the errors reported above.
When I install XE, the instance is up and running (as confirmed by the 'home page' of XE being displayed in the browser waiting for logon and password. When I start the process to restore, XE is no longer available (in some form of maintenance mode and unavailable to normal users).
What do you mean 'using pfile/spfile'? How would I 'use'? (I did verify that if I take a 'backup' using the XE tools, I CAN restore on the same instance where I took the backup. Just not on a different, new instance of XE.)
The article is quite interesting, but it seems to assume that I'm working in the same instance where the backup was taken. The instructions also seem to contradict the error messages I presented above.
I don't have any autobackup settings on my brand new copy of XE, so the following command in the article does not seem meaningful to me. Clearly it makes sense to use both a TO and FROM. It seems that what I should be doing is using a 'FROM' where I have the 'TO'; what happens if I point to my backup copy of the SPFILE in the FROM clause instead of 'AUTOBACKUP'? The command string I provided in my original post may be trying to do that, but I can't tell from the source article (which I now have to go find...)
"RMAN> RESTORE SPFILE TO '/tmp/spfileTEMP.ora' FROM AUTOBACKUP;"
Additional question - "DBID"? In express, I do not see any value for DBID. I understand why it would be relevant in a more advanced implementation, with multiple databases being maintained under the same Oracle installation, but it's not clear to me what DBID identifies - the database's internal "primary key" value in a directory of databases, or some other implication.
Edited by: user13488246 on Dec 16, 2010 7:13 AM

HT201444 iOS8 has completely broken my phone, unable to restore?

I am getting a restore error of 4005. I have disconnected all USB cables from my iMac. I am unable to restore the phone to factory settings. My computer starts extracting software, then I get the error 4005. I reboot and try again, I get the 4005 error. I see a Samsung device in my near future. Totally frustrated with this...
iTunes: 12.0.1.26
OSX: 10.9.5

Hello erksonson,
It may help to try restoring with another USB cable.
Restore using another USB cable.
Restore your device on another computer.
If you continue to see error 4005, 4013, or 4014 when you restore your device, contact Apple for support.
iOS: Restore errors 4005, 4013, and 4014
http://support.apple.com/kb/TS5314
Cheers,
Allen

Unable to restore iPhone - Error 1603

Hi,
Used iTunes to update my iPhone 3Gs to the latest version and am currently stuck.
iPhone is in "ready to restore mode" (showing the connect to iTunes picture)
Am unable to restore the iPhone, when I press restore in iTunes, it prepares the device for restore, then after a while displays Error 1603.
I have tried restarting the computer, "hard restore" of my iPhone, reinstalling iTunes and also turning off my antivirus.
I have the latest version of iTunes installed and my operating system is up to date.
Appreciate any help as I am unable to receive any calls at the moment.
Cheers,
Brock

Thanks amy_lou.
I tried below steps as mentioned in link:
1) stop and start apple mobile service .
2)change administrator .
not sure which one worked but got my phone restored succesful .

Unable to restore the snap shoot of ZFS

Similar Messages

Maybe you are looking for