Unable to restore when trying to upgrade to 4.3
When I try to upgrade to 4.3 iTunes (correct version) will not restore (error 1013). What to do?
Thought you folks would like to know that I finally fixed my iphone recovery mode 1013 error. I learned that their are two gs.apple.com servers. I found out which server I was connecting to and decided to try the other server. I added the below entry in my hosts files. I did a recovery and it worked. NOW, what on earth is going on with apple gs.apple.com server 17.112.176.11? gs.apple.com 17.151.36.30 worked for me. Keep in mind, my phone is a normal stock phone with only apple store apps. my phone is not gail broken and I do not use tiny umbrella or related utilities.Problems began with the release prior to the current one.
# Host Database
# localhost is used to configure the loopback interface
# when the system is booting. Do not change this entry.
127.0.0.1 localhost
255.255.255.255 broadcasthost
17.151.36.30 gs.apple.com
# 17.112.176.11 gs.apple.com
Similar Messages
-
When tried to upgrade iphone 4S from 8.1.2 to 8.1.3 it crushed at the middle.
After it it not let it tern on and cannot make recovery and crush in the middle of the process with "could not be restored. An unknown error occurred (3014)"Hi bahaluly,
Thanks for using Apple Support Communities. Based on what you stated, it sounds like you are not able to update the iPhone. I would recommend that you read this article, it may be able to help the issue.
Get help with iOS update and restore errors - Apple Support
Solve network errors
Related errors: 17, 1638, 3014, 3194, 3000, 3002, 3004, 3013, 3014, 3015, 3194, 3200, or "There was a problem downloading the software," or "The device isn't eligible for the requested build." These alerts mean that your computer is either having difficulty contacting the Apple update server or communicating with your device.
Check your computer for software or settings that might cause communication issues between your computer and Apple or between your computer and your device.
Cheers,
Mario -
I have unlocked my iphone and when tried to upgrade it, i got an error, so i restored it.But i was not able to activate my iphone 3gs now...it is showing a message like ' sim card not found'..please help me with this regard
Try popping out the SIM card and turn off the phone.
Pop in the SIM card once again and turn on the phone, make sure that the SIM card is placed and seated perfectly in the tray!
Tell me how did you unlock your phone!? -
When trying to upgrade to iOS 6 after a few minutes message pops up: unable to complete download, options cancel or settings? what do I need to change in the settings? What have I set in settings that is stopping my upgrade??
Sorry, good network connection, happily downloaded for 15 minutes before this popup appeared... Staying with iOS 5.1.1 for now hoping Apple can sort it..oO
-
Error -5000 on my 3GS when trying to upgrade to ios 5?
When trying to upgrade my iphone 3GS it keep saying there is error -5000 and if I continue with the upgrade all my infomation will be deleted from my phone, does anyone know what I can do to not have this error? Thanks!
Unable to contact the iOS software update server gs.apple.com
Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
Install the latest version of iTunes.
Check security software and ensure that communication to gs.apple.com is allowed. Follow these stepsfor assistance with security software.
Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow theadvanced iTunes Store troubleshooting steps to edit the hosts file or revert to a default hosts file. See "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information."
Try to restore from another known-good computer and network.
If the errors persist on another computer, the device may need service. -
TS3694 Hi I am getting an error 3194 when trying to upgrade my ipad 2 to IOS v 5.1, any tips?
Any advice on the eror code 3194 when trying to upgrade to IOS v5, i cannot download the lateste version of iTunes and cannot do a restore because of this error?
ThanksiPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
See
iOS 5: Updating your device to iOS 5
http://support.apple.com/kb/HT4972
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect to your computer & click on the "Update your device using iTunes".
Tip - You may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. After you update to iOS 5.x, the next update can be installed via wifi (i.e., not connected to your computer).
Cheers, Tom -
IMac shuts down when trying to upgrade from Tiger to Leopard
My iMac, purchased in November of '07, came installed with Tiger but also came with a Leopard OS update disk. When trying to upgrade to Leopard last week, every time I rebooted off the disk the computer would run for a minute in the gray screen and then suddenly shut off with no warning message. I checked HD in disk utilities, repaired my permissions and tried again with the same results. I've got 30 gigs of free space and 4 gigs of RAM which should be plenty. I talked to Apple support who walked me through the installation procedure with the same results and ended up shipping me a new install disk which came today. I am getting the same shut down on reboot with their replacement disk. Apple actually sent me two white disks. The first is labeled "For Mac Computers, Mac OSX Install disc 1" The second is labeled "MacBook, Mac OSX Install Disc 2" Since the second disc is label "MacBook" is it possible they sent me the wrong set of discs?
Thanksrk87,
Thanks for replying. I have a 500 gig hard drive which yields a 465gig usable capacity, so, at 30 Gigs available, I don't have 10% of the drive free. This may be an issue, but my more immediate problem is that I can't get the install disk to boot up at all.
I called apple support again see what I could find out about the install disks which wouldn't work. The support guy seemed like he had a lot of knowledge about the system and suggested trying the Tiger install disk (that came with the machine) to see if it would boot up, which it did. After that success, I tried the Leopard update disk in another iMac I have at home and it worked as it should. Since the disk worked fine on the other mac, the guy at tech support speculated that there is some sort of hardware issue causing the install shut down on the computer in question.
His speculation was about the memory installed in the machine which might be the issue. I had bought the computer from an Apple Authorized store here in town who upgraded the RAM to 4GIGs using third-party memory. Even though the memory seems to have functioned properly for the past year, apple support says that there could be some sort of incompatibility with the third party product causing the install disk not to work.
Apple support told me about running a memory diagnostic off of the Tiger install disk by rebooting with the disk in the computer and hold down the "D" key. After I got off the phone I ran the test which turned out to take an hour in its long version. The test indicated no problems, but apple had told me that it might not be totally conclusive. At this point, I'm taking the computer back to the store where I bought it and will let them figure it out. -
I keep getting the message "unable to authenticate" when trying to sign in to the YouTube app. The website allows me to sign in just fine. Anyone know how to fix this?
Try "resetting" the iPad...
Hold the On/Off Sleep/Wake button and the Home button down at the same time for at least ten seconds, until the Apple logo appears.
edited by: cs -
Issue when trying to upgrade FB 4.7 to AIRDSK 3.6
Hi,
I'm desperately trying to upgrade FB 4.7 to AIRSDK 3.6 since 3 weeks.
I've followed the various solutions found on forums and the various processes displayed by the "helpx.adobe.com" pages, but none of them works.
So please, if a member of Adobe Support Team or someone who succeeded to perform the upgrade reads this, I need help and if possible a detailed strp by step process.
Thks in advance for answers.I think i tried all the available ones, and there are many. Why can't we
have a definitive automatic upgrade solution instead of having to do
such a number of manipulations ?
Le 14/03/2013 04:41, Flex harUI a écrit :
>
Re: Issue when trying to upgrade FB 4.7 to AIRDSK 3.6
created by Flex harUI <http://forums.adobe.com/people/Flex+harUI> in
/Flex/ - View the full discussion
<http://forums.adobe.com/message/5146932#5146932 -
Error code 23 when trying to upgrade???
Error code 23 when trying to upgrade/ also have lost wi-fi connection. A coindence or related problem?
Hi Dauby51,
You may need to uninstall and reinstall PSE 11, then reapply the updates.
Make sure you don't have any disk cleanup utilities that might be running during and after the install that may be altering any of the files installed or installation paths.
Give this a try and let me know how it goes,
Regards,
Pete -
Error when trying to upgrade scsm dw 2012 sp1 to r2
Hello,
when I trying to install scsm 2012 r2 upgrade on my scsm dw server error appears.
does anyone faced and successfully resolved this problem?
regards,
Ilgar
Regards, Ilgar Khalilov.This issue might happen if you have a space in the DW Management Group name.
Maybe this blog post from Anders Asp is helpful:
Strange error message when trying to upgrade SCSM 2012 Sp1 to SCSM 2012 R2
Andreas Baumgarten | H&D International Group -
[Solved]Conflicting file when trying to upgrade node.js
Hey there,
I'm updating my packages and a file conflict arrives when trying to upgrade node. I was hoping someone would know how to deal with this.
error: failed to commit transaction (conflicting files)
nodejs: /usr/lib/node_modules/npm/node_modules/read-package-json/node_modules/normalize-package-data/lib/core_module_names.json exists in filesystem
Errors occurred, no packages were upgraded.
Thanks for any help!
Last edited by Aquila (2013-12-23 17:47:23)https://bbs.archlinux.org/viewtopic.php?id=130138
-
I have error code -43 when trying to upgrade iPhone 3GS running v4.3 to version 5 or above. This error occurs whilst trying to back up phone during upgrade process. 2GB of free memory on phone. Can anyone help?
Well I spoke too soon.
The update was successful, but now I cannot connect to the 3GS data network.
Cannot get email and cannot open a page in Safari.
+"Safari could not open the page because the server stopped responding."+
+"Cannot Get Mail+
+THe mail server is not responding. Verify that you have entered the correct account info in Mail settings."+
Email and internet work fine on WiFi.........no data using 3GS network.
Looks like I will have to revert back to old OS. -
I get this error message when trying to upgrade software "The Iphone update software server could not be contacted" Can anyone help?
I'd start with the following document:
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server -
Internal error (-43) when trying to upgrade to 8.81.319 SP0 PL10
I am trying to upgrade from 8.81.313 PL05 to 8.81.319 PL10. After the database upgrade check completes and the upgrade begins it immediately fails when trying to upgrade the server tools and states Internal error (-43).
Please let me know what is wrong. I am logged in as Administrator and running the upgrade on the SQL 2008 server.
Regards,
Fred
Edited by: Fred Searing on Feb 3, 2012 7:31 PMya i have download PL 11 again. now working fine.
Maybe you are looking for
-
Hi, We have a requirement wherein we want to pull the account balances in the following format: Co Cd GL A/C WBS ELEMENT WBS ELEMENT WBS ELEMENT GL A/C WBS ELEMENT WBS ELEMENT WBS ELEMENT
-
Bleeds not showing up in exported pdf
Hi. I'm having issues with the pdf after it has been exported. I have added bleeds to the design file and when I export it (and check the bleeds box in the exporting window) they do not show up. What does show up are these crop marks, which is strang
-
Is anyone having Internet issues after the last OS upgrade. Ever since I updated my iMacs I am having "host resolution" issues.
-
Rebuild Aperture Periodically?
Should I rebuild Aperture Library periodically? Even if nothing is wrong?
-
I have been trying to create a multicam clip from two camera's. They sync properly when using the sync feature but not when I use the multicam feature does anyone know what I may be doing wrong?