Unable to Retrieve BW variants
How to Retrieve BW Variants..my error discreption is like this.. Since today morning 9 am IST none of the BW variants are working by this i mean when we run the variant the data stored in the variant is not getting reflected in the selection screen. This is not limited to user the same issue is faced by all BW users
Please check the Plant combination Data from List Cube for a given period/Year Combination and also check whether you have data with S_NONE along with PLANT dimension.
Hope this will help you
Thanks
Venkat
Similar Messages
-
Hi, my laptop just crashed and I was unable to retrieve all the pictures saved in it. However, I have a backup on my iPod touch. Is it possible to sync pictures from my iPod to my laptop? Thanks.
Sync with "new" computer
https://discussions.apple.com/docs/DOC-3141 -
Hi, going crazy. Can't get this fixed. Unable to retrieve contact info from synch server. I did re-do synch using one time only replace I-phone info from "contacts" on computer and tried synching after that - no use same error!
I saw someone by name of Gator wrote pathways to follow in windows but got only as far as user (yes, selected my name as user as opposed to public) then clicked it open but lost after that - can't get to appdata for the next step.... any help or ideas would be soooooo appreciated. I'm so tired of this issue. thanks!
Pinina in Phoenix, AzHi, going crazy. Can't get this fixed. Unable to retrieve contact info from synch server. I did re-do synch using one time only replace I-phone info from "contacts" on computer and tried synching after that - no use same error!
I saw someone by name of Gator wrote pathways to follow in windows but got only as far as user (yes, selected my name as user as opposed to public) then clicked it open but lost after that - can't get to appdata for the next step.... any help or ideas would be soooooo appreciated. I'm so tired of this issue. thanks!
Pinina in Phoenix, Az -
Need help in using ActiveX to retrieve a VARIANT
Need help in using ActiveX to retrieve a VARIANT.
Variant is shown as var{VT_Ul1,1} in debug
Using the following
hr = CA_VariantGetShort (&var, &value);
I get 0 for my answer instead of 1.
Solved!
Go to Solution.Answered my own question.
VT_Ul1 is an unsigned char and not a short. -
We are in the middle of testing our R12 Upgrade. I am getting this error from the invoice XML-based report that we are using in R12. (based on log). Only for a specific invoice number that this error is appearing. The trace is not showing me anything. I don't know how to proceed on how to debug where the error is coming from and how to fix this. I found a patch 8339196 that shows exactly the same error number but however, I have to reproduce the error in another test instance before we apply the patch. I created exactly the same order and interface to AR and it doesnt generate an error. I even copied the order and interface to AR and it doesn't complete with error. It is only for this particular invoice that is having an issue and I need to get the root cause as to why. Please help. I appreciate what you all can contribute to identify and fix our issue. We have not faced this issue in R11i that we are maintaining right now for the same program which has been running for sometime. However, after the upgrade for this particular data that the user has created, it is throwing this error REP-271504897.
MSG-00100: DEBUG: Get_Country_Description Return value:
MSG-00100: DEBUG: Get_Country_Description Return value:
REP-0002: Unable to retrieve a string from the Report Builder message file.
REP-271504897:
REP-0069: Internal error
REP-57054: In-process job terminated:Terminated with error:
REP-271504897: MSG-00100: DEBUG: BeforeReport_Trigger +
MSG-00100: DEBUG: AfterParam_Procs.Populate_Printing_Option
MSG-00100: DEBUG: AfterParam_Procs.Populate_Tax_Printing_Option
MSG-00100: DEBUG: BeforeReport_Trigger.Get_Message_Details
MSG-00100: DEBUG: BeforeReport_Trigger.Get_Org_Profile.
MSG-00100: DEBUG: Organization Id: 117
MSG-00100: DEBUG: BeforeReport_Trigger.Build_Where_Clause
MSG-00100: DEBUG: P_Choi
Report Builder: Release 10.1.2.3.0 - Production on Tue Jul 23 09:56:46 2013
Copyright (c) 1982, 2005, Oracle. All rights reserved.Hi,
Check on this note also : Purchasing Reports Fail When Changing Output To XML REP-0002 REP-271504897 REP-57054 (Doc ID 1452608.1)
If you cant reproduce the issue on other instance, apply the patch on the test instance and verify all the funcionality related to the patch works OK. Then move the patch to production. Or you can clone the prod environment to test the patch.
Regards, -
Unable to retrieve Object. Failed to load database information
I am getting the following error when trying to run my reports from Crystal XI with SQL Server 2005.
CrystalReportViewer
Error in File 180+DAYREP.EWARP: Failed to load database information.
Unable to retrieve Object.
Error in File 180+DAYREP.EWARP: Failed to load database information.
I have done some research on this but no luck on resolving the issue.
Any suggestions are welcome thanks.First thought is that the application cannot access the DSN or database driver that the report was designed on, this could be permissions.
I tried to ping my database and was unable to find the host. I was under the assumption it was using TNSNames which is able to resolve.
How can I validate the permissions?
As I said I'm a little lost here. Apologies if I ask stupid questions. -
Unable to retrieve nametab info for logic table BSEG during Database Export
Hi,
Our aim is to Migrate to New hardware and do the Database Export of the existing System(Unicode) and Import the same in the new Hardware
I am doing Database Export on SAP 4.7 SR1,HP-UX ,Oracle 9i(Unicode System) and during Database Export "Post Load Processing phase" got the error as mentioned in SAPCLUST.log
more SAPCLUST.log
/sapmnt/BIA/exe/R3load: START OF LOG: 20090216174944
/sapmnt/BIA/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#20
$ SAP
/sapmnt/BIA/exe/R3load: version R6.40/V1.4 [UNICODE]
Compiled Aug 13 2007 16:20:31
/sapmnt/BIA/exe/R3load -ctf E /nas/biaexp2/DATA/SAPCLUST.STR /nas/biaexp2/DB/DDLORA.T
PL /SAPinst_DIR/SAPCLUST.TSK ORA -l /SAPinst_DIR/SAPCLUST.log
/sapmnt/BIA/exe/R3load: job completed
/sapmnt/BIA/exe/R3load: END OF LOG: 20090216174944
/sapmnt/BIA/exe/R3load: START OF LOG: 20090216182102
/sapmnt/BIA/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#20
$ SAP
/sapmnt/BIA/exe/R3load: version R6.40/V1.4 [UNICODE]
Compiled Aug 13 2007 16:20:31
/sapmnt/BIA/exe/R3load -datacodepage 1100 -e /SAPinst_DIR/SAPCLUST.cmd -l /SAPinst_DI
R/SAPCLUST.log -stop_on_error
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(GSI) INFO: dbname = "BIA20071101021156
(GSI) INFO: vname = "ORACLE "
(GSI) INFO: hostname = "tinsp041
(GSI) INFO: sysname = "HP-UX"
(GSI) INFO: nodename = "tinsp041"
(GSI) INFO: release = "B.11.11"
(GSI) INFO: version = "U"
(GSI) INFO: machine = "9000/800"
(GSI) INFO: instno = "0020293063"
(EXP) TABLE: "AABLG"
(EXP) TABLE: "CDCLS"
(EXP) TABLE: "CLU4"
(EXP) TABLE: "CLUTAB"
(EXP) TABLE: "CVEP1"
(EXP) TABLE: "CVEP2"
(EXP) TABLE: "CVER1"
(EXP) TABLE: "CVER2"
(EXP) TABLE: "CVER3"
(EXP) TABLE: "CVER4"
(EXP) TABLE: "CVER5"
(EXP) TABLE: "DOKCL"
(EXP) TABLE: "DSYO1"
(EXP) TABLE: "DSYO2"
(EXP) TABLE: "DSYO3"
(EXP) TABLE: "EDI30C"
(EXP) TABLE: "EDI40"
(EXP) TABLE: "EDIDOC"
(EXP) TABLE: "EPIDXB"
(EXP) TABLE: "EPIDXC"
(EXP) TABLE: "GLS2CLUS"
(EXP) TABLE: "IMPREDOC"
(EXP) TABLE: "KOCLU"
(EXP) TABLE: "PCDCLS"
(EXP) TABLE: "REGUC"
myCluster (55.16.Exp): 1557: inconsistent field count detected.
myCluster (55.16.Exp): 1558: nametab says field count (TDESCR) is 305.
myCluster (55.16.Exp): 1561: alternate nametab says field count (TDESCR) is 304.
myCluster (55.16.Exp): 1250: unable to retrieve nametab info for logic table BSEG
myCluster (55.16.Exp): 8033: unable to retrieve nametab info for logic table BSEG
myCluster (55.16.Exp): 2624: failed to convert cluster data of cluster item.
myCluster: RFBLG *003**IN07**0001100000**2007*
myCluster (55.16.Exp): 318: error during conversion of cluster item.
myCluster (55.16.Exp): 319: affected physical table is RFBLG.
(CNV) ERROR: data conversion failed. rc = 2
(RSCP) WARN: env I18N_NAMETAB_TIMESTAMPS = IGNORE
(DB) INFO: disconnected from DB
/sapmnt/BIA/exe/R3load: job finished with 1 error(s)
/sapmnt/BIA/exe/R3load: END OF LOG: 20090216182145
/sapmnt/BIA/exe/R3load: START OF LOG: 20090217115935
/sapmnt/BIA/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#20
$ SAP
/sapmnt/BIA/exe/R3load: version R6.40/V1.4 [UNICODE]
Compiled Aug 13 2007 16:20:31
/sapmnt/BIA/exe/R3load -datacodepage 1100 -e /SAPinst_DIR/SAPCLUST.cmd -l /SAPinst_DI
R/SAPCLUST.log -stop_on_error
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(GSI) INFO: dbname = "BIA20071101021156
(GSI) INFO: vname = "ORACLE "
(GSI) INFO: hostname = "tinsp041
(GSI) INFO: sysname = "HP-UX"
(GSI) INFO: nodename = "tinsp041"
(GSI) INFO: release = "B.11.11"
(GSI) INFO: version = "U"
(GSI) INFO: machine = "9000/800"
(GSI) INFO: instno = "0020293063"
myCluster (55.16.Exp): 1557: inconsistent field count detected.
myCluster (55.16.Exp): 1558: nametab says field count (TDESCR) is 305.
myCluster (55.16.Exp): 1561: alternate nametab says field count (TDESCR) is 304.
myCluster (55.16.Exp): 1250: unable to retrieve nametab info for logic table BSEG
myCluster (55.16.Exp): 8033: unable to retrieve nametab info for logic table BSEG
myCluster (55.16.Exp): 2624: failed to convert cluster data of cluster item.
myCluster: RFBLG *003**IN07**0001100000**2007*
myCluster (55.16.Exp): 318: error during conversion of cluster item.
myCluster (55.16.Exp): 319: affected physical table is RFBLG.
(CNV) ERROR: data conversion failed. rc = 2
(RSCP) WARN: env I18N_NAMETAB_TIMESTAMPS = IGNORE
(DB) INFO: disconnected from DB
SAPCLUST.l/sapmnt/BIA/exe/R3load: job finished with 1 error(s)
/sapmnt/BIA/exe/R3load: END OF LOG: 20090217115937
og (97%)
The main eror is "unable to retrieve nametab info for logic table BSEG "
Your reply to this issue is highly appreciated
Thanks
SunilHello,
acording to this output:
/sapmnt/BIA/exe/R3load -datacodepage 1100 -e /SAPinst_DIR/SAPCLUST.cmd -l /SAPinst_DI
R/SAPCLUST.log -stop_on_error
you are doing the export with a non-unicode SAP codepage. The codepage has to be 4102/4103 (see note #552464 for details). There is a screen in the sapinst dialogues that allows the change of the codepage. 1100 is the default in some sapinst versions.
Best Regards,
Michael -
Unable to retrieve tables from this connection
I have been using Dreamweaver for over 5 years. I have been
using an Access database and ASP the entire time. I am using a
Windows 2000 server for the database and web site. I have used
every verson of Dreamweaver since Ultra Dev. When I bought verson 8
and upgraded to 8.0.2, I began getting the following message when I
try to edit or create a recordset.
"Unable to retrieve tables from this connection, click on the
'Define...' button to test this connection."
I don't know what to do. Is this a widespread problem? Is it
a Windows problem? Is it a Dreamweaver problem? Is it a network
problem?
Please HELP!Did you ever get an answer for this ?
I am having the same issue but using XP professional. -
Need Help: Web Analysis, Unable to retrieve the data & Security Tab missing
Hi
I'm new to Hyperion (our version: 9.2.1) and we're implementing Hyperion Planning. One of the reporting tools is Web Analysis.
I'm trying to create simple grid reporting. but I'm unable to retrieve the data instead the result is "n/a"
and
The File's Properties > Security tab is missing
Does anyone know my issue?
Thanks,Hi Experts,
You told its resolved.how?
I am having the same issue i am unable to retrive the tables.
"Database:MS SQL Server
Driver :weblogic.jdbcx.sqlserver.SQLServerDataSource.
Connection String:jdbc:weblogic:sqlserver://localhost:1433;databaseName=BAM"
Please help if you have resolved this issue.Any helpful links plz forward [email protected]
Thanks -
CrystalReportViewer Failed to Open the connection Unable to retrieve Object
I am getting the following Error on trying to view a report in the CMC and the Infoview.
CrystalReportViewer
Failed to Open the connection. ReportName
Unable to retrieve Object.
Failed to open the connection. ReportName
I have recently re-installed Crystal Reports Server XI on a server after a disk failure. I had a backup of my CMS database. I reinstalled the Crystal Servwer without atttaching this database, however crystal did not create a new db so I attached my old one.
I have deleted all my old ODBC connections and recreated them with new names and then reconnected my reports in Crystal Reports XI using the "Set Datasource Location" option and the report works fine.But as soon as I try to view it after uploading it as an object onto the server, I get the above error.
Any help would be appreciated.I am tagging into this unanswered question as well because I think I have a similar issue. In my case I have a report which runs correctly in Crystal Reports designer but when I move it to the scheduler it fails on a "Failed to connect" to the report. In have used "Set data location" to no avail. When I go to Admin Tools and look at the complete list of datasources for all my reports this particular datasource is listed twice. The group of reports under one of the datasources works correctly. The reports listed under the second datasource all fail. The two datsources are spelled exactly the same and when I sompare the database details for a successfull and a failing report using this datasource they are the same (in the console and in infoview).
I have also checked the ODBC connections on the Crystalserver and there is only one occureence.
Any ideas?
Thanks! -
REP-0002: Unable to retrieve a string from the Report Builder message file;
Hi,
I've a custom report in which i need to display a large string, of more than 4000 characters. To cater to this requirement i've written a formula column which displays string upto 4k characters and for a string of size beyond 4k i am calling a procedure which uses a temp table having a clob field.
For a small string the report runs fine but whenever a large string requirement comes into the picture, said procedure gets triggered and i get REP-0002: Unable to retrieve a string from the Report Builder message file.
OPP log for the same gives an output as under:
Output type: PDF
[9/21/10 2:17:12 PM] [UNEXPECTED] [388056:RT14415347] java.io.FileNotFoundException: /app/soft/test1udp/appsoft/inst/apps/e180r_erptest01/logs/appl/conc/out/o14415347.out (No such file or directory)
at java.io.FileInputStream.open(Native Method)
at java.io.FileInputStream.<init>(FileInputStream.java:106)
at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:241)
at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:172)
Report Builder 10g
BI Publisher's version : 4.5.0
RDBMS Version : 10.2.0.4.0
Oracle Applications Version : 12.0.6
Searched for the same on metalink and found Article ID 862644.1, other than applying patch and upgrading version of BI Publisher is there any other workaround to display a comma seperated string as long as 60k characters, If any please suggest.
Thanks,
BhoomikaMetalink <Note:1076529.6> extracts
Problem Description
When running a *.REP generated report file you get errors:
REP-00002 Unable to retrieve string from message file
REP-01439 Cannot compile program since this is a runtime report
Running the same report using the *.RDF file is successful.
You are running the report with a stored procedure,
OR you are running against an Oracle instance other than the one developed on,
Or, you recently upgraded your Oracle Server.
Solution Description
1) Check that the user running the report has execute permissions on any stored
SQL procedures called. <Note:1049458.6>
2) Run the report as an .RDF not an .REP , that is remove or rename the .REP
version of the report. <Note:1012546.7>
3) Compile the report against the same instance it is being run against.
<Note:1071209.6> and <Note:1049620.6> -
Problem: Unable to retrieve workflow data from MDM repository
This is a new MDM installations scenario for version 5.5 SP05 (5.5.40.83).
After installing MS Visio, finding problems connecting it with the MDM Data Manager. After doing MDM workflow installations, able to initiate the MS Visio Workflow from MDM Data Manager and can see the Pane-MS Visio Workflow Stencil but not the able to see the Pane-MS Visio Workflow Stencil Details that appears below the Pane-MS Visio Workflow Stencil. Secondly geting a pop-up with the error message as - 'Unable to retrieve workflow data from MDM repository.'
I have added a parameter Mail Server=MailServerIPAddess (the existing IP addr), but it hasn't helped.
Can any one please help me in this !Hi
As Felix mentioned, it might be a version compatibility problem.
You have also mentioned that mail server is not working for that do this
Mailserver = SMTP server.company.com ( ex. Mail.company(xxxxx).com)
MDM workflow notify task is working after rebooting the Machine. So the rule is after making changes to MDS.ini file reboot the machine ,to observe the consequence of configurable changes.
If u need anything this let me know.
Regards
Hari -
I getting this annoying error "Unable to retrieve clouds on VMM server. Please make sure the server name is correct and try connecting again." I've followed the recommended documentation for setting up SPF and Azure using the following:
http://www.hyper-v.nu/archives/mvaneijk/2013/01/installing-and-configuring-system-center-service-provider-foundation/
I've gone thru the troubleshoot steps from the following:
http://blogs.technet.com/b/scvmm/archive/2014/03/04/kb-the-windows-azure-pack-service-management-portal-does-not-retrieve-cloud-settings.aspx
http://social.technet.microsoft.com/forums/windowsazure/en-US/363e7dae-7370-4605-bc8d-b98fa6dc9d8e/unable-to-register-vmm-server
So you don't need to send me those links.
I found a few others which pointed me to the event logs WindowsAzurePack\MGmtSVC-AdminAPi and AdminSite. In these event logs, I see a lot of event ID 12 and 1046. The contents of event id 12 is the following:
Log Name: Microsoft-WindowsAzurePack-MgmtSvc-AdminSite/Operational
Source: Microsoft-WindowsAzurePack-MgmtSvc-AdminSite
Date: 6/19/2014 3:27:55 PM
Event ID: 12
Task Category: (65522)
Level: Error
Keywords: None
User: IIS APPPOOL\MgmtSvc-AdminSite
Computer: usw-azure-01.uswired.com
Description:
Error:ManagementClientException: Resource not found.
<Exception>
<Type>ManagementClientException</Type>
<Message>Resource not found.</Message>
<StackTrace><![CDATA[
at Microsoft.WindowsAzure.Server.Management.ManagementClientBase.<ThrowIfResponseNotSuccessful>d__2b.MoveNext()
at Microsoft.WindowsAzure.Management.TaskSequencer.<>c__DisplayClass1e`1.<RunSequenceAsync>b__1d(Task previousTask)
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.WindowsAzure.Server.SystemCenter.AdminExtension.Controllers.SystemCenterAdminController.<GetResourceProviderAsync>d__2e7.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.WindowsAzure.Server.SystemCenter.AdminExtension.Controllers.SystemCenterAdminController.<GetAutomationResourceProvider>d__2b6.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at lambda_method(Closure , Task )
at System.Web.Mvc.Async.TaskAsyncActionDescriptor.EndExecute(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass3f.<BeginInvokeAsynchronousActionMethod>b__3e(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass37.<>c__DisplayClass39.<BeginInvokeActionMethodWithFilters>b__33()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass4f.<InvokeActionMethodFilterAsynchronously>b__49()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass4f.<InvokeActionMethodFilterAsynchronously>b__49()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass4f.<InvokeActionMethodFilterAsynchronously>b__49()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass37.<BeginInvokeActionMethodWithFilters>b__36(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass25.<>c__DisplayClass2a.<BeginInvokeAction>b__20()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass25.<BeginInvokeAction>b__22(IAsyncResult asyncResult)]]></StackTrace>
<HttpContext>
<User IsAuthenticated="true" Name="USWIRED\Administrator" />
<Request>
<RawUrl>/SystemCenterAdmin/GetAutomationResourceProvider</RawUrl>
<UserHostAddress>fe80::c179:19c8:c5f2:7309%12</UserHostAddress>
<Headers>
<Header Key="Cache-Control" Value="no-cache" />
<Header Key="Connection" Value="Keep-Alive" />
<Header Key="Content-Length" Value="2" />
<Header Key="Content-Type" Value="application/json" />
<Header Key="Accept" Value="application/json, text/javascript, */*; q=0.01" />
<Header Key="Accept-Encoding" Value="gzip, deflate" />
<Header Key="Accept-Language" Value="en-US" />
<Header Key="Host" Value="usw-azure-01.uswired.com:30091" />
<Header Key="Referer" Value="https://usw-azure-01.uswired.com:30091/" />
<Header Key="User-Agent" Value="Mozilla/5.0 (Windows NT 6.3; WOW64; Trident/7.0; rv:11.0) like Gecko" />
<Header Key="x-ms-client-session-id" Value="c343c29d-20b1-412b-be94-879409205700" />
<Header Key="x-ms-client-antiforgery-id" Value="0crwi2qNk20bMr6C04/vKd4L28WG1nd8JKBdOlCCp+xlph40YeL2oTdmeiTkPmE272S2dqmGQMNo+FElKkG2MdR0Xhq41RU/t8PrFjcG0Vgx4a8dgZLbfKVURo9n84F1XWtJOkTTUK/OeNVWBrK1+w=="
/>
<Header Key="x-ms-client-request-id" Value="dcc427c7-40fc-4fdd-9a70-7622969ff40d-2014-06-19 22:27:55Z" />
<Header Key="X-Requested-With" Value="XMLHttpRequest" />
<Header Key="DNT" Value="1" />
<Cookies>
<Cookie Name="AdminSiteFedAuth" Secure="false" Expires="0001-01-01T00:00:00Z" Domain="" Path="/" Value="Redacted (2000 characters)" />
<Cookie Name="AdminSiteFedAuth1" Secure="false" Expires="0001-01-01T00:00:00Z" Domain="" Path="/" Value="Redacted (424 characters)" />
<Cookie Name="__RequestVerificationToken_Admin" Secure="false" Expires="0001-01-01T00:00:00Z" Domain="" Path="/" Value="Redacted (128 characters)" />
</Cookies>
</Headers>
</Request>
</HttpContext>
</Exception>, operationName:SystemCenterAdmin.GetAutomationResourceProvider, version:, accept language:en-US, subscription Id:, client request Id:dcc427c7-40fc-4fdd-9a70-7622969ff40d-2014-06-19 22:27:55Z, principal Id:USWIRED\Administrator, page request
Id:c343c29d-20b1-412b-be94-879409205700, server request id:
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-WindowsAzurePack-MgmtSvc-AdminSite" Guid="{5E78D550-1384-5A96-C12A-CB6DA7BC6365}" />
<EventID>12</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>65522</Task>
<Opcode>0</Opcode>
<Keywords>0x0</Keywords>
<TimeCreated SystemTime="2014-06-19T22:27:55.971935000Z" />
<EventRecordID>399</EventRecordID>
<Correlation ActivityID="{FAA512AF-E0A9-4F2A-80EF-09F72D2F7918}" />
<Execution ProcessID="3424" ThreadID="2308" />
<Channel>Microsoft-WindowsAzurePack-MgmtSvc-AdminSite/Operational</Channel>
<Computer>usw-azure-01.uswired.com</Computer>
<Security UserID="S-1-5-82-4118156790-2181488624-806685255-2797011695-3958995103" />
</System>
<EventData>
<Data Name="message">ManagementClientException: Resource not found.
<Exception>
<Type>ManagementClientException</Type>
<Message>Resource not found.</Message>
<StackTrace><![CDATA[
at Microsoft.WindowsAzure.Server.Management.ManagementClientBase.<ThrowIfResponseNotSuccessful>d__2b.MoveNext()
at Microsoft.WindowsAzure.Management.TaskSequencer.<>c__DisplayClass1e`1.<RunSequenceAsync>b__1d(Task previousTask)
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.WindowsAzure.Server.SystemCenter.AdminExtension.Controllers.SystemCenterAdminController.<GetResourceProviderAsync>d__2e7.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at Microsoft.WindowsAzure.Server.SystemCenter.AdminExtension.Controllers.SystemCenterAdminController.<GetAutomationResourceProvider>d__2b6.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at lambda_method(Closure , Task )
at System.Web.Mvc.Async.TaskAsyncActionDescriptor.EndExecute(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass3f.<BeginInvokeAsynchronousActionMethod>b__3e(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass37.<>c__DisplayClass39.<BeginInvokeActionMethodWithFilters>b__33()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass4f.<InvokeActionMethodFilterAsynchronously>b__49()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass4f.<InvokeActionMethodFilterAsynchronously>b__49()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass4f.<InvokeActionMethodFilterAsynchronously>b__49()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass37.<BeginInvokeActionMethodWithFilters>b__36(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass25.<>c__DisplayClass2a.<BeginInvokeAction>b__20()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass25.<BeginInvokeAction>b__22(IAsyncResult asyncResult)]]></StackTrace>
<HttpContext>
<User IsAuthenticated="true" Name="USWIRED\Administrator" />
<Request>
<RawUrl>/SystemCenterAdmin/GetAutomationResourceProvider</RawUrl>
<UserHostAddress>fe80::c179:19c8:c5f2:7309%12</UserHostAddress>
<Headers>
<Header Key="Cache-Control" Value="no-cache" />
<Header Key="Connection" Value="Keep-Alive" />
<Header Key="Content-Length" Value="2" />
<Header Key="Content-Type" Value="application/json" />
<Header Key="Accept" Value="application/json, text/javascript, */*; q=0.01" />
<Header Key="Accept-Encoding" Value="gzip, deflate" />
<Header Key="Accept-Language" Value="en-US" />
<Header Key="Host" Value="usw-azure-01.uswired.com:30091" />
<Header Key="Referer" Value="https://usw-azure-01.uswired.com:30091/" />
<Header Key="User-Agent" Value="Mozilla/5.0 (Windows NT 6.3; WOW64; Trident/7.0; rv:11.0) like Gecko" />
<Header Key="x-ms-client-session-id" Value="c343c29d-20b1-412b-be94-879409205700" />
<Header Key="x-ms-client-antiforgery-id" Value="0crwi2qNk20bMr6C04/vKd4L28WG1nd8JKBdOlCCp+xlph40YeL2oTdmeiTkPmE272S2dqmGQMNo+FElKkG2MdR0Xhq41RU/t8PrFjcG0Vgx4a8dgZLbfKVURo9n84F1XWtJOkTTUK/OeNVWBrK1+w=="
/>
<Header Key="x-ms-client-request-id" Value="dcc427c7-40fc-4fdd-9a70-7622969ff40d-2014-06-19 22:27:55Z" />
<Header Key="X-Requested-With" Value="XMLHttpRequest" />
<Header Key="DNT" Value="1" />
<Cookies>
<Cookie Name="AdminSiteFedAuth" Secure="false" Expires="0001-01-01T00:00:00Z" Domain="" Path="/" Value="Redacted (2000 characters)" />
<Cookie Name="AdminSiteFedAuth1" Secure="false" Expires="0001-01-01T00:00:00Z" Domain="" Path="/" Value="Redacted (424 characters)" />
<Cookie Name="__RequestVerificationToken_Admin" Secure="false" Expires="0001-01-01T00:00:00Z" Domain="" Path="/" Value="Redacted (128 characters)" />
</Cookies>
</Headers>
</Request>
</HttpContext>
</Exception></Data>
<Data Name="requestId">
</Data>
<Data Name="subscriptionId">
</Data>
<Data Name="clientRequestId">dcc427c7-40fc-4fdd-9a70-7622969ff40d-2014-06-19 22:27:55Z</Data>
<Data Name="principalId">USWIRED\Administrator</Data>
<Data Name="version">
</Data>
<Data Name="pageRequestId">c343c29d-20b1-412b-be94-879409205700</Data>
<Data Name="acceptLanguage">en-US</Data>
<Data Name="operationName">SystemCenterAdmin.GetAutomationResourceProvider</Data>
</EventData>
</Event>
Event ID 1046 is
Log Name: Microsoft-WindowsAzurePack-MgmtSvc-AdminSite/Operational
Source: Microsoft-WindowsAzurePack-MgmtSvc-AdminSite
Date: 6/19/2014 3:32:56 PM
Event ID: 1046
Task Category: (116)
Level: Error
Keywords: None
User: IIS APPPOOL\MgmtSvc-AdminSite
Computer: usw-azure-01.uswired.com
Description:
Could not connect to Resource Provider. Error: Resource not found.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-WindowsAzurePack-MgmtSvc-AdminSite" Guid="{5E78D550-1384-5A96-C12A-CB6DA7BC6365}" />
<EventID>1046</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>116</Task>
<Opcode>0</Opcode>
<Keywords>0x0</Keywords>
<TimeCreated SystemTime="2014-06-19T22:32:56.854137500Z" />
<EventRecordID>413</EventRecordID>
<Correlation ActivityID="{C20DBEAD-388F-4CF4-80FD-21C6419CC2F1}" />
<Execution ProcessID="3424" ThreadID="2768" />
<Channel>Microsoft-WindowsAzurePack-MgmtSvc-AdminSite/Operational</Channel>
<Computer>usw-azure-01.uswired.com</Computer>
<Security UserID="S-1-5-82-4118156790-2181488624-806685255-2797011695-3958995103" />
</System>
<EventData>
<Data Name="errorMessage">Resource not found.</Data>
</EventData>
</Event>
The other thing I notice is that when trying to connect to the VMM. It's trying to use domain\username, yet when I try logging in with domain\username via the SCVMM Console. I get the You cannot access VMM management server (Error ID: 1604).
I'm not sure if this is why I can not add the VMM to WAP. Any help would be appreciated. Thanks
NickHello,
I am not sure about the answer but I guess these steps will solve your problem:
1) Log in to the SPF server by using an account that is a member of the SPF_Admin local group.
2) Open an elevated Windows PowerShell window.
3) Type the following commands, and press Enter after you type each command:
Import-module spfadmin
New-SCSPFTenant -Name Administrator -SubscriptionId 00000000-0000-0000-0000-000000000000
4) Close the WAP Server Management Portal, and then reconnect to it to update all items. -
Unable to retrieve collections from the Search Service.
Hi,
I have a user trying to upload a collection. She gets the
following error:
Unable to retrieve collections from the Search Service.
Please verify that the ColdFusion MX Search Server is
installed and running.
Obviously, I checked the service. It was running. I restarted
the service. That did nothing. I restarted all the CF services.
Didn't fix the issue. I also rebotted the server, not expecting
that to work. It didn't.
Checking the server logs, I see this:
The description for Event ID ( 105 ) in Source ( ColdFusion
MX 7 Search Server ) cannot be found. The local computer may not
have the necessary registry information or message DLL files to
display messages from a remote computer. You may be able to use the
/AUXSOURCE= flag to retrieve this description; see Help and Support
for details. The following information is part of the event:
ColdFusion MX 7 Search Server.
Also, after talking to my co-worker more, it turns out this
occurred right after she uploaded a new collection to the
administrator. This link sounds similar to what I'm experiencing:
http://kb.adobe.com/selfservice/viewContent.do?externalId=6c6881a9
Maybe it's a corrupt collection?
but I don't see any errors in the log
(:\CFusionMX7\verity\Data\services\ColdFusionK2_indexserver1\log\status.log)
Finally, there are some errors in the Verity service, and it
looks like the Verity service Verity K2Server (Version 2.20pr6)
points to D:\CFusionMX\lib\k2server.exe, which doesn’t exist
anymore because we’ve upgraded to MX7.I'm not sure if this is
an old service left over from before we upgraded from CFMX to
CFMX7.
We are running CFMX7 on a Windows 2003 Server SP1 if that
matters.
Thanks in advance for any help.In the left hand panel of the ColdFusion Administrator expand
the Data & Services link. Then select the Verity K2 Server
link. Change localhost to 127.0.0.1 in the Verity Host Name
textbox.
Ted Zimmerman -
Unable to retrieve the operations and entities during service introspection
Hi,
I created one sample flex mobile project using flash builder 4.5, i would like to invoke the web service (wsdl file), which is developed in java and hosted in remote machine server.i want to call a one getEmployeeList method from the webservice.
In flash builder i used the menu Data->connect to web service , i gave the url, changed the service name and package name, after that i clicked next button,
the service introspection dialog appears and after a few seconds, flash builder 4.5 shows the message "Unable to retrieve the operations and entities from the web service" and "There was an error during service interospection".
I try to open the url in the browser window i could able to see the wsdl file.so, please help me to solve this issue!
Thanks & Regards,
siva
Message was edited by: siva cscsame problem also on my xampp installation , it worked perfect with REST service in the previous flex 3 release , is it my apache conf or something related on Flash builder
this happens when I call my function that connect to mysql do the query and returns the array object
Err log from Flash Builder 4:
There was an error during service introspection.
<br /><b>Warning</b>: require_once(Zend/Loader/Autoloader.php) [<a href='function.require-once'>function.require-once</a>]: failed to open stream: No such file or directory in <b>C:\xampp\htdocs\MYAPP\bin-debug\gateway.php</b> on line <b>23</b><br /><br /><b>Fatal error</b>: require_once() [<a href='function.require'>function.require</a>]: Failed opening required 'Zend/Loader/Autoloader.php' (include_path='.;C:\xampp\php\pear\;C:/xampp/htdocs/ZendFramework/library') in <b>C:\xampp\htdocs\MYAPP\bin-debug\gateway.php</b> on line <b>23</b><br />
thanks in advance
P
Maybe you are looking for
-
Hi, multiple ipod touchs in my house so the kids want their own Facetime accounts. If I get them apple ID's then I can't manage them on one itunes account. What do you recommend?
-
3.1.2 Update made things worse, final straw.
After 4 days of perfect quality service, then 8 days of nothing but problem after problem, that's it, I lost it, this is a completely unacceptable level of service from both Apple and O2. Battery life barely lasting a day, 3G signal constantly droppi
-
Numbers coming out at "1n7" instead of "1.7" when using Java APIs
I have an RTF template, and on the Text Form Field Options dialog in Word, I have the Number Format field set to "#,##0.00000". When this template is run from a concurrent program, or from the desktop plug-in, the numbers correctly format in the form
-
( maybe see as well entry #27 in this list) For debugging / logging from my ( now working) CustomRealm implements DebugableRealm, i tried to set DebugSecurityRealm=true. Starting WL Server gives the behaviour, described in thread 27. As well instanci
-
Time mgmt Doubt: How to stop quota update
hello experts, we are facing a problem in stopping quota. thr requirment is like : the entitlement is 2.5 days permonth, which is happening, the maximum accumulation is suppoesd to be 53 days, which is not happening. we are generating it every mont