Unable to retrieve saved model

I am newbie to VC. I installed VC as per the instructions and created Model --> Module --> Page --> iView. I used BAPI from R/3 and created iView as per the document (BAPI_BANK_GET_LIST). I did preview and deployed it to portal. I clicked on save button and closed visual composure. When I logged on next time I am able see Model but when I double click I could not locate my Module /Page or iView. Am I missing something ?
Thanks for your Help
Regards
Raghu
Message was edited by: RG

Hi,
Did you install all the latest patches for VC?
Lior

Similar Messages

Hi, my laptop just crashed and I was unable to retrieve all the pictures saved in it. However, I have a backup on my iPod touch. Is it possible to sync pictures from my iPod to my laptop? Thanks.

Hi, my laptop just crashed and I was unable to retrieve all the pictures saved in it. However, I have a backup on my iPod touch. Is it possible to sync pictures from my iPod to my laptop? Thanks.

Sync with "new" computer
https://discussions.apple.com/docs/DOC-3141

I suddenly am unable to retrieve my emails. I discussed this with my Internet provider, but still get an error message and can't access my emails. Any suggestions???

I am unable to retrieve my emails since yesterday. I called Time Warner Cable, my Internet provider, but they could not help me; they stated that the settings had changed, since they were upgrading. I adjusted the settings, but still get an error message:
          Alert
          There may be a problem with the mail server or network. Verify the settings for account "Mail 1" or try again.
          The server returned the error: The connection to the server "smtp.roadrunner.com" on port 110 timed out.
I changed the server, and the port, as Time Warner Cable tech rep recommended, but to no avail. They recommended I delete my current email account and recreate it, but that I check with Apple first, because I might lose my contact list (and any email messages I'd previously saved!?). They suggested Apple might be able to tell me how to not lose the contacts, emails, profile.
Any help would be appreciated.

Hi, what Interface are you using, & which one are you checking?
Each Interface will have it's own settings.
Though all of these steps may or may not be needed, I'm including them all.
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.7 & 10.8…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
10.4 instructions...
Is that Interface dragged to the top of Network>Show:>Network Port Configurations.
If using Wifi/Airport...
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
For 10.5/10.6/10.7/10.8, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
(There may be better or faster DNS numbers in your area, but these should be a good test).
Click OK.

Unable to retrieve Object.Error in File: Unknown Database Connector Error

Hi,
I have deployed two report on BO XI server. Both the reports are designed in Crystal Report designer XI.
I got all database credentilas, saved in CMC by my administrator so that these reports should not prompt me for any database login parameters when I am trying to run them from BOXI test server.
When I am running one of my report, the report is working fine. But this is not the case with other report.
This second report is working well with some inputs.
Case 1 - It is having to input date parameter(Date1 and Date2), when I am entering one input date parameter (Date1) and other (Date2) is set to NULL, it is displaying correct result. But when I am giving any date for Date2 it is throwing me an error -
"Error in File Manager_Agent_Report.rpt: Unknown Database Connector Error
Unable to retrieve Object.
Error in File Manager_Agent_Report.rpt: Unknown Database Connector Error "
Case 2 - Similiarly it is having an other input field which I am using in filetering the records in Report.
If I am setting it to NULL or If I am not giving this field, while entering the input. I am getting an output.
But incase I am giving this particular field then again it is promptig me the above mentioned error.
The report are working fine if I am executing them from crystal report designer.
Please help me to find a solution for the same.
Thanks
Deepak

Deepak, firstly are you trying to connect to one database or two in these reports? I would check the ODBC connections both in server and client machine (testing server or whatever you testing it on). Make sure both connection settings are exactly the same.
Secondly I will check the parameters values under Objects under the CMC and see if there is anything changed there.
Report back if you have checked both and it still giving errors
Regards
Jehanzeb

Unable to retrieve e-mail addresses that are in the server's address book

Since I installed the new version of Firefox (4.0) I am unable to retrieve any of the e-mail addresses that are duly indicated in the server's address book.
In summary, beforehand I could type the 1st letter of an e-mail address and Firefox would remember it and propose it upfront!
What can I do to solve this issue please!?

Hi gbman, sorry I missed your reply, I took someone out to a birthday dinner.
A good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
1. Clear Firefox's Cache
Firefox > Preferences > Advanced
On the Network mini-tab > Offline Storage : "Clear Now"
2. If needed, delete the site's cookies here
While viewing a page on the site,
Tools > Page Info > Security > "View Cookies"
After clearing the cookies, reload the page and try logging in again. Does that help?

Cannot retrieve saved files from I cloud after resetting I pad

As I had issues with the I pad I decided to save all my files, photos etc on I cloud and then reset the I pad back again. Now I am unable to retrieve most of the docs and photos saved on I cloud. It shows all the files are available on I cloud but, cannot retrieve.
Visited apple store and spoke to a sales person who mentioned apple can help on this as some of the apps I used were 3rd party apps such as quick office. These apps were purchased from Apple store and it is surprising they seem to be not compatible.
The reason to have an I cloud account is to be able to retrieve your files on the move.
Most of my main documents were initially saved on quick office.
If I am unable to get this issue solved this will be my last apple product and definitely warn others who is using I cloud to save docs.

Can you find a folder in the backup that looks like the [http://kb.mozillazine.org/Profile_folder_-_Thunderbird profile folder]? In XP it would have been in C:\Documents and Settings\<Windows user name>\Application Data\Thunderbird\Profiles\<Profile name>. If so, the mail files and address books should be there, and can be transferred to the new profile.
[http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Thunderbird This article] explains how to transfer the data, e.g. copy abook.mab from the old to the new profile to restore Personal Address Book.

Unable to Retrieve Contact Info from synch server - Gator wrote to try renaming file but I can't manage to find the pathway on my Win 7 computer for that file! got as far as my name under user but can't get to application data. Can someone help?

Hi, going crazy. Can't get this fixed. Unable to retrieve contact info from synch server. I did re-do synch using one time only replace I-phone info from "contacts" on computer and tried synching after that - no use same error!
I saw someone by name of Gator wrote pathways to follow in windows but got only as far as user (yes, selected my name as user as opposed to public) then clicked it open but lost after that - can't get to appdata for the next step.... any help or ideas would be soooooo appreciated. I'm so tired of this issue. thanks!
Pinina in Phoenix, Az

Hi, going crazy. Can't get this fixed. Unable to retrieve contact info from synch server. I did re-do synch using one time only replace I-phone info from "contacts" on computer and tried synching after that - no use same error!
I saw someone by name of Gator wrote pathways to follow in windows but got only as far as user (yes, selected my name as user as opposed to public) then clicked it open but lost after that - can't get to appdata for the next step.... any help or ideas would be soooooo appreciated. I'm so tired of this issue. thanks!
Pinina in Phoenix, Az

XML Report completes with error due to REP-271504897: Unable to retrieve a string from the Report Builder message file.

We are in the middle of testing our R12 Upgrade. I am getting this error from the invoice XML-based report that we are using in R12. (based on log). Only for a specific invoice number that this error is appearing. The trace is not showing me anything. I don't know how to proceed on how to debug where the error is coming from and how to fix this. I found a patch 8339196 that shows exactly the same error number but however, I have to reproduce the error in another test instance before we apply the patch. I created exactly the same order and interface to AR and it doesnt generate an error. I even copied the order and interface to AR and it doesn't complete with error. It is only for this particular invoice that is having an issue and I need to get the root cause as to why. Please help. I appreciate what you all can contribute to identify and fix our issue. We have not faced this issue in R11i that we are maintaining right now for the same program which has been running for sometime. However, after the upgrade for this particular data that the user has created, it is throwing this error REP-271504897.
MSG-00100: DEBUG: Get_Country_Description Return value:
MSG-00100: DEBUG: Get_Country_Description Return value:
REP-0002: Unable to retrieve a string from the Report Builder message file.
REP-271504897:
REP-0069: Internal error
REP-57054: In-process job terminated:Terminated with error:
REP-271504897: MSG-00100: DEBUG: BeforeReport_Trigger +
MSG-00100: DEBUG: AfterParam_Procs.Populate_Printing_Option
MSG-00100: DEBUG: AfterParam_Procs.Populate_Tax_Printing_Option
MSG-00100: DEBUG: BeforeReport_Trigger.Get_Message_Details
MSG-00100: DEBUG: BeforeReport_Trigger.Get_Org_Profile.
MSG-00100: DEBUG: Organization Id: 117
MSG-00100: DEBUG: BeforeReport_Trigger.Build_Where_Clause
MSG-00100: DEBUG: P_Choi
Report Builder: Release 10.1.2.3.0 - Production on Tue Jul 23 09:56:46 2013
Copyright (c) 1982, 2005, Oracle. All rights reserved.

Hi,
Check on this note also : Purchasing Reports Fail When Changing Output To XML REP-0002 REP-271504897 REP-57054 (Doc ID 1452608.1)
If you cant reproduce the issue on other instance, apply the patch on the test instance and verify all the funcionality related to the patch works OK. Then move the patch to production. Or you can clone the prod environment to test the patch.
Regards,

Unable to retrieve Object. Failed to load database information

I am getting the following error when trying to run my reports from Crystal XI with SQL Server 2005.
CrystalReportViewer
Error in File 180+DAYREP.EWARP: Failed to load database information.
Unable to retrieve Object.
Error in File 180+DAYREP.EWARP: Failed to load database information.
I have done some research on this but no luck on resolving the issue.
Any suggestions are welcome thanks.

First thought is that the application cannot access the DSN or database driver that the report was designed on, this could be permissions.
I tried to ping my database and was unable to find the host. I was under the assumption it was using TNSNames which is able to resolve.
How can I validate the permissions?
As I said I'm a little lost here. Apologies if I ask stupid questions.

Unable to retrieve nametab info for logic table BSEG during Database Export

Hi,
Our aim is to Migrate to New hardware and do the Database Export of the existing System(Unicode) and Import the same in the new Hardware
I am doing Database Export on SAP 4.7 SR1,HP-UX ,Oracle 9i(Unicode System) and during Database Export "Post Load Processing phase" got the error as mentioned in SAPCLUST.log
more SAPCLUST.log
/sapmnt/BIA/exe/R3load: START OF LOG: 20090216174944
/sapmnt/BIA/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#20
$ SAP
/sapmnt/BIA/exe/R3load: version R6.40/V1.4 [UNICODE]
Compiled Aug 13 2007 16:20:31
/sapmnt/BIA/exe/R3load -ctf E /nas/biaexp2/DATA/SAPCLUST.STR /nas/biaexp2/DB/DDLORA.T
PL /SAPinst_DIR/SAPCLUST.TSK ORA -l /SAPinst_DIR/SAPCLUST.log
/sapmnt/BIA/exe/R3load: job completed
/sapmnt/BIA/exe/R3load: END OF LOG: 20090216174944
/sapmnt/BIA/exe/R3load: START OF LOG: 20090216182102
/sapmnt/BIA/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#20
$ SAP
/sapmnt/BIA/exe/R3load: version R6.40/V1.4 [UNICODE]
Compiled Aug 13 2007 16:20:31
/sapmnt/BIA/exe/R3load -datacodepage 1100 -e /SAPinst_DIR/SAPCLUST.cmd -l /SAPinst_DI
R/SAPCLUST.log -stop_on_error
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(GSI) INFO: dbname   = "BIA20071101021156
(GSI) INFO: vname    = "ORACLE                          "
(GSI) INFO: hostname = "tinsp041
(GSI) INFO: sysname = "HP-UX"
(GSI) INFO: nodename = "tinsp041"
(GSI) INFO: release = "B.11.11"
(GSI) INFO: version = "U"
(GSI) INFO: machine = "9000/800"
(GSI) INFO: instno   = "0020293063"
(EXP) TABLE: "AABLG"
(EXP) TABLE: "CDCLS"
(EXP) TABLE: "CLU4"
(EXP) TABLE: "CLUTAB"
(EXP) TABLE: "CVEP1"
(EXP) TABLE: "CVEP2"
(EXP) TABLE: "CVER1"
(EXP) TABLE: "CVER2"
(EXP) TABLE: "CVER3"
(EXP) TABLE: "CVER4"
(EXP) TABLE: "CVER5"
(EXP) TABLE: "DOKCL"
(EXP) TABLE: "DSYO1"
(EXP) TABLE: "DSYO2"
(EXP) TABLE: "DSYO3"
(EXP) TABLE: "EDI30C"
(EXP) TABLE: "EDI40"
(EXP) TABLE: "EDIDOC"
(EXP) TABLE: "EPIDXB"
(EXP) TABLE: "EPIDXC"
(EXP) TABLE: "GLS2CLUS"
(EXP) TABLE: "IMPREDOC"
(EXP) TABLE: "KOCLU"
(EXP) TABLE: "PCDCLS"
(EXP) TABLE: "REGUC"
myCluster (55.16.Exp): 1557: inconsistent field count detected.
myCluster (55.16.Exp): 1558: nametab says field count (TDESCR) is 305.
myCluster (55.16.Exp): 1561: alternate nametab says field count (TDESCR) is 304.
myCluster (55.16.Exp): 1250: unable to retrieve nametab info for logic table BSEG
myCluster (55.16.Exp): 8033: unable to retrieve nametab info for logic table BSEG
myCluster (55.16.Exp): 2624: failed to convert cluster data of cluster item.
myCluster: RFBLG      *003**IN07**0001100000**2007*
myCluster (55.16.Exp): 318: error during conversion of cluster item.
myCluster (55.16.Exp): 319: affected physical table is RFBLG.
(CNV) ERROR: data conversion failed. rc = 2
(RSCP) WARN: env I18N_NAMETAB_TIMESTAMPS = IGNORE
(DB) INFO: disconnected from DB
/sapmnt/BIA/exe/R3load: job finished with 1 error(s)
/sapmnt/BIA/exe/R3load: END OF LOG: 20090216182145
/sapmnt/BIA/exe/R3load: START OF LOG: 20090217115935
/sapmnt/BIA/exe/R3load: sccsid @(#) $Id: //bas/640_REL/src/R3ld/R3load/R3ldmain.c#20
$ SAP
/sapmnt/BIA/exe/R3load: version R6.40/V1.4 [UNICODE]
Compiled Aug 13 2007 16:20:31
/sapmnt/BIA/exe/R3load -datacodepage 1100 -e /SAPinst_DIR/SAPCLUST.cmd -l /SAPinst_DI
R/SAPCLUST.log -stop_on_error
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(GSI) INFO: dbname   = "BIA20071101021156
(GSI) INFO: vname    = "ORACLE                          "
(GSI) INFO: hostname = "tinsp041
(GSI) INFO: sysname = "HP-UX"
(GSI) INFO: nodename = "tinsp041"
(GSI) INFO: release = "B.11.11"
(GSI) INFO: version = "U"
(GSI) INFO: machine = "9000/800"
(GSI) INFO: instno   = "0020293063"
myCluster (55.16.Exp): 1557: inconsistent field count detected.
myCluster (55.16.Exp): 1558: nametab says field count (TDESCR) is 305.
myCluster (55.16.Exp): 1561: alternate nametab says field count (TDESCR) is 304.
myCluster (55.16.Exp): 1250: unable to retrieve nametab info for logic table BSEG
myCluster (55.16.Exp): 8033: unable to retrieve nametab info for logic table BSEG
myCluster (55.16.Exp): 2624: failed to convert cluster data of cluster item.
myCluster: RFBLG      *003**IN07**0001100000**2007*
myCluster (55.16.Exp): 318: error during conversion of cluster item.
myCluster (55.16.Exp): 319: affected physical table is RFBLG.
(CNV) ERROR: data conversion failed. rc = 2
(RSCP) WARN: env I18N_NAMETAB_TIMESTAMPS = IGNORE
(DB) INFO: disconnected from DB
SAPCLUST.l/sapmnt/BIA/exe/R3load: job finished with 1 error(s)
/sapmnt/BIA/exe/R3load: END OF LOG: 20090217115937
og (97%)
The main eror is "unable to retrieve nametab info for logic table BSEG "
Your reply to this issue is highly appreciated
Thanks
Sunil

Hello,
acording to this output:
/sapmnt/BIA/exe/R3load -datacodepage 1100 -e /SAPinst_DIR/SAPCLUST.cmd -l /SAPinst_DI
R/SAPCLUST.log -stop_on_error
you are doing the export with a non-unicode SAP codepage. The codepage has to be 4102/4103 (see note #552464 for details). There is a screen in the sapinst dialogues that allows the change of the codepage. 1100 is the default in some sapinst versions.
Best Regards,
Michael

Unable to retrieve tables from this connection

I have been using Dreamweaver for over 5 years. I have been
using an Access database and ASP the entire time. I am using a
Windows 2000 server for the database and web site. I have used
every verson of Dreamweaver since Ultra Dev. When I bought verson 8
and upgraded to 8.0.2, I began getting the following message when I
try to edit or create a recordset.
"Unable to retrieve tables from this connection, click on the
'Define...' button to test this connection."
I don't know what to do. Is this a widespread problem? Is it
a Windows problem? Is it a Dreamweaver problem? Is it a network
problem?
Please HELP!

Did you ever get an answer for this ?
I am having the same issue but using XP professional.

Need Help: Web Analysis, Unable to retrieve the data & Security Tab missing

Hi
I'm new to Hyperion (our version: 9.2.1) and we're implementing Hyperion Planning. One of the reporting tools is Web Analysis.
I'm trying to create simple grid reporting. but I'm unable to retrieve the data instead the result is "n/a"
and
The File's Properties > Security tab is missing
Does anyone know my issue?
Thanks,

Hi Experts,
You told its resolved.how?
I am having the same issue i am unable to retrive the tables.
"Database:MS SQL Server
Driver :weblogic.jdbcx.sqlserver.SQLServerDataSource.
Connection String:jdbc:weblogic:sqlserver://localhost:1433;databaseName=BAM"
Please help if you have resolved this issue.Any helpful links plz forward [email protected]
Thanks

CrystalReportViewer Failed to Open the connection Unable to retrieve Object

I am getting the following Error on trying to view a report in the CMC and the Infoview.
CrystalReportViewer
Failed to Open the connection. ReportName
Unable to retrieve Object.
Failed to open the connection. ReportName
I have recently re-installed Crystal Reports Server XI on a server after a disk failure. I had a backup of my CMS database. I reinstalled the Crystal Servwer without atttaching this database, however crystal did not create a new db so I attached my old one.
I have deleted all my old ODBC connections and recreated them with new names and then reconnected my reports in Crystal Reports XI using the "Set Datasource Location" option and the report works fine.But as soon as I try to view it after uploading it as an object onto the server, I get the above error.
Any help would be appreciated.

I am tagging into this unanswered question as well because I think I have a similar issue. In my case I have a report which runs correctly in Crystal Reports designer but when I move it to the scheduler it fails on a "Failed to connect" to the report. In have used "Set data location" to no avail. When I go to Admin Tools and look at the complete list of datasources for all my reports this particular datasource is listed twice. The group of reports under one of the datasources works correctly. The reports listed under the second datasource all fail. The two datsources are spelled exactly the same and when I sompare the database details for a successfull and a failing report using this datasource they are the same (in the console and in infoview).
I have also checked the ODBC connections on the Crystalserver and there is only one occureence.
Any ideas?
Thanks!

REP-0002: Unable to retrieve a string from the Report Builder message file;

Hi,
I've a custom report in which i need to display a large string, of more than 4000 characters. To cater to this requirement i've written a formula column which displays string upto 4k characters and for a string of size beyond 4k i am calling a procedure which uses a temp table having a clob field.
For a small string the report runs fine but whenever a large string requirement comes into the picture, said procedure gets triggered and i get REP-0002: Unable to retrieve a string from the Report Builder message file.
OPP log for the same gives an output as under:
Output type: PDF
[9/21/10 2:17:12 PM] [UNEXPECTED] [388056:RT14415347] java.io.FileNotFoundException: /app/soft/test1udp/appsoft/inst/apps/e180r_erptest01/logs/appl/conc/out/o14415347.out (No such file or directory)
     at java.io.FileInputStream.open(Native Method)
     at java.io.FileInputStream.<init>(FileInputStream.java:106)
     at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:241)
     at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:172)
Report Builder 10g
BI Publisher's version : 4.5.0
RDBMS Version : 10.2.0.4.0
Oracle Applications Version : 12.0.6
Searched for the same on metalink and found Article ID 862644.1, other than applying patch and upgrading version of BI Publisher is there any other workaround to display a comma seperated string as long as 60k characters, If any please suggest.
Thanks,
Bhoomika

Metalink <Note:1076529.6> extracts
Problem Description
When running a *.REP generated report file you get errors:
REP-00002 Unable to retrieve string from message file
REP-01439 Cannot compile program since this is a runtime report
Running the same report using the *.RDF file is successful.
You are running the report with a stored procedure,
OR you are running against an Oracle instance other than the one developed on,
Or, you recently upgraded your Oracle Server.
Solution Description
1) Check that the user running the report has execute permissions on any stored
SQL procedures called. <Note:1049458.6>
2) Run the report as an .RDF not an .REP , that is remove or rename the .REP
version of the report. <Note:1012546.7>
3) Compile the report against the same instance it is being run against.
<Note:1071209.6> and <Note:1049620.6>

Problem: Unable to retrieve workflow data from MDM repository

This is a new MDM installations scenario for version 5.5 SP05 (5.5.40.83).
After installing MS Visio, finding problems connecting it with the MDM Data Manager. After doing MDM workflow installations, able to initiate the MS Visio Workflow from MDM Data Manager and can see the Pane-MS Visio Workflow Stencil but not the able to see the Pane-MS Visio Workflow Stencil Details that appears below the Pane-MS Visio Workflow Stencil. Secondly geting a pop-up with the error message as - 'Unable to retrieve workflow data from MDM repository.'
I have added a parameter Mail Server=MailServerIPAddess (the existing IP addr), but it hasn't helped.
Can any one please help me in this !

Hi
As Felix mentioned, it might be a version compatibility problem.
You have also mentioned that mail server is not working for that do this
Mailserver = SMTP server.company.com ( ex. Mail.company(xxxxx).com)
MDM workflow notify task is working after rebooting the Machine. So the rule is after making changes to MDS.ini file reboot the machine ,to observe the consequence of configurable changes.
If u need anything this let me know.
Regards
Hari

Unable to retrieve saved model

Similar Messages

Maybe you are looking for