Unable to reuse the de assigned HU in Inbound Delivery

Hello Experts,
I have one issue with HU. The scenario is, Inbound delivery is created for the PO, Scheduling Agreement, then batch split done and packed the material. To created for the inbound delivery and confirmed, while confirming the TO, GR took place.
Now I am reversing the inbound delivery in VL09 and in VL32N, deleted the HU assigned to it and deleted the batch split as well.
Now the status of the inbound delivery is "A" Not for put away. We want to use the same HU which was assigned earlier.
Could you please advise me whether is it possible? if so please guide me.
When I try to reuse the same HU, I am getting error message.
Regards
Bala

Hello,
You can try and check out this in your steps.
Created inbound delivery, batch split done, packed the material. TO created and confirmed while doing so PGR happened.
Now I am reversing the inbound delivery in VL09, and then in VL32N selected u201CPACKu201D and now Processing of handling unit for inbound delivery so and so screen appears.
I have selected the HU and in the header selected HU --- Delete Assignment. Now am getting u201CDocument assignment of handling units cancelled" message.
Now save the delivery after you removed the assignment as per above steps.
Again go to chnage mode and try to pack the material with the HU it will alow you to pack.
Now coming back to the Inbound delivery overview screen. I have deleted the batch split. While deleting the batch split system gives the message u201C Item u201Cu2026u2026u201D has already been made available by a transfer order. But still I can delete that.
Ideally if you have reversed the delivery, then you should get the message Item u201Cu2026u2026u201D has already been made available by a transfer order.
Br,
Tushar

Similar Messages

What is the BAPI for creating an inbound delivery without reference.

Hi Experts,
What is the BAPI for creating an inbound delivery without reference.
Points will be rewarded

BAPI_DELIVERYPROCESSING_EXEC
cheers
Aveek

Assigning HU to Inbound Delivery

Hello everyone!
Could anyone please give me information how to assign a HU created via transaction HU02 to an inbound delivery (like VL32N).
I already tried some function modules (e.g. HU_DELIVERY_ATTRIBUTES_ADD, HU_ASSIGN_HUS_TO_OBJECT, etc). I think I just don't have the correct parameters.
Thanks for your help in advance!
BR,
Alfons

Hi,
refer
Function module for assigning a HU to delivery
Hope this solves your purpose.
Award points if it helps.
-Gaurang

Unable to invoke the composite bussiness rule into other bpel

Hi
I am unable to reuse the composite business rule. while invoking composite business rule i am getting the exception(xsd is not loaded).
Can any one help on this thing.
thanks in advance.
Thanks
srinu

Hi
I am unable to reuse the composite business rule. while invoking composite business rule i am getting the exception(xsd is not loaded).
Can any one help on this thing.
thanks in advance.
Thanks
srinu

Assigning Handling Unit(HU) to Inbound Delivery.

I have Created Inbound Delivery and HU and I want to assign HU to Inbound Delivery.
I want to develop Z transaction to assign HU to Inbound Delivery.
Please tell me any Function Module or BAPI to assign HU to Inbound Delivery with the parameters.

Hi,
Try with PROCESS_HU_INBOUND_DLVRY, WS_DELIVERY_UPDATE, SD_DELIVERY_UPDATE_PACKING
Thanks,
Abhijit

What is the Different between the vendor batch in inbound delivery and MIGO

Dear Guru,
My vendor batch number did not copied to goods receipt when i use migo to post GR reference with Inbound delivery.
Can anyone advice if there is any different to the vendor batch in GR and IB?
Thank you very much,
Regards,
Chee Wee

Dear Amey,
Thanks.
Actually we have an interface with our supplier system, where they post the Goods issue in their system, then we will receive an inbound delivery idoc "DESADV" from the supplier.
and my vendor can provide their batch number to us only when their goods issue is posted.
In this case, we would like the inbound delivery idoc to include this vendor batch number, so when we perform the goods receipt reference with Inbound delivery will have the vendor batch number automatically.
Regards
Chee wee

Unable to view the tabs to assign points?

Hi,
I am unable to view the tabs to assign points for the answers I have received.
Please look into the matter...
Title: Confusion Related to New G/L?
Discussion Body:
Hi,
Management is thinking for implementing New G/L in my Company and we have to prepare the presentation for that. I am not sure of few points though I have searched already but unable to find out anything which clears my doubts which are as follows:
1) Can we implement new G/L In-house or do we have to get it done from external sources or SAP only?
2) Can we achieve IFRS and GAAP reporting through segment reporting in house or not. Does that require any other cost as we are already on ECC6.0 but new g/l is not activated?
3) Is it mandatory to get the Data Migration done from SAP or can we do it In-house as well?
4) If one knows the approx. cost if we get it done from external sources at each point on in total at all the above mentioned points?
5) Is it so that partially we can do it and partially we need to take the help of the external sources?
Please reply asap.
Thanks in advance...
Regards
Nitin

Some added toolbar and anti-virus add-ons are known to cause
Firefox issues. '''Disable All of them.'''
'''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]''' {web link}
While you are in safe mode;
Type '''about:preferences#advanced'''<Enter> in the address bar.
Under '''Advanced,''' Select '''General.'''
Look for and turn off '''Use Hardware Acceleration'''.
Poke around safe web sites. Are there any problems?

When I try to use 'Stacked Column Bar'. with data assigned in the graphs, and want to see it in the 'Preview' mode in Xeclsius, I unable to see the graphs apart from the Axes ans Series Value, the graphs becomes totaly invisible why So ?

When I try to use 'Stacked Column Bar'. with data assigned in the graphs, and want to see it in the 'Preview' mode in Xeclsius, I unable to see the graphs apart from the Axes ans Series Value, the graphs becomes totally invisible why So ?

Hi Ranendra,
For basic understanding of Dashboards and Models you can use standard Templates or samples which ll come along with dashboard designer(Formly Xcelsius) installation.
For path File-->Templates(or Samples).
Under Templates you ll have different categories and for each you ll find the dashboard Templates.
Regards,
Venkat P

Unable to see the values in detail block

Hello,
I have a master detail block, when I query the form, I am unable to see the values for a particular field(Column), all other columns appear properly in the details block, Upon checking the same table(s) in SQL ( by using the JOIN defined in the where clause of the relationship in Forms) , it shows the relevant records for all fields. So what could be wrong with the Form, please advise.
Thanks
FM

IQ wrote:
I have just checked the field its a non-database field which is being used as a LOV column to display a value derived from LOV. How do I make this populate at Query time, as obviously this works when the Form is in a insert mode but not for Query mode. How to make it work for Query ? As it for LOV column and non-database filed, ignore my first suggestion.
Does your non-database filed has associate any column ?
For example, you have SUPPLIER_ID (database column) and SUPPLIER_NAME (non-database column). SUPPLIER_NAME has LOV column. And when selecting supplier name from LOV value also assign at supplier_id.
Now to show supplier name when querying, you have to write POST-CHANGE trigger at supplier_id. like
SELECT ASSC_CODE INTO :MST_SUPPLIER.ACC_CODE
FROM ACC_SUB_SUB_CONTROL
WHERE ASSC_ID=:MST_SUPPLIER.SUPP_ASSC_ID;Hope this helps

BOFC Unable to start the data source

Hi there,
i've done a standalone install using SQL 2008 R2 express. But i'm unable to start the data source and get this error:
Failed to start data source
Failed to start server instances on machine DELL1.
Failed to initialize server configured on machine DELL1.
Class not registered
Thanks,
Anees

Ok, problem solved.
I had to create a seperate DCOM user and assign it to the following roles in windows:
log on as a batch job
log on as a service
then assign this DCOM user to the Ctbroker and CTserver. As i'm not running this on a domain, there was no need to use 'packet level authentication'. So i set the authentication level to none.
There was no need to use the web based admin interface. Ctadmin.msc worked perfectly.
Thanks,
Anees

[Solved] Problem with Xorg, unable to load the right keymap

Hi, people,
I recently installed arch on a desktop, but there is a problem installing X: for whatever reason, Xorg seems unable to load the correct keymap (fr-latin9) and instead, loads the default one.
I can see what seems to be the problem in the Xorg logs, but I actually absolutely don't know how to solve it. Here my /var/log/Xorg.0.log
root@kgentoo keikoz # cat /mnt/tmp/var/log/Xorg.0.log
[ 9.900]
X.Org X Server 1.12.4
Release Date: 2012-08-27
[ 9.900] X Protocol Version 11, Revision 0
[ 9.900] Build Operating System: Linux 3.4.8-1-ARCH x86_64
[ 9.900] Current Operating System: Linux kdesktop 3.4.9-1-ARCH #1 SMP PREEMPT Wed Aug 15 18:59:31 CEST 2012 x86_64
[ 9.901] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=7d2d3ed4-6903-4845-b70d-9462f52f4329 ro quiet
[ 9.901] Build Date: 27 August 2012 08:04:39AM
[ 9.901]
[ 9.901] Current version of pixman: 0.26.2
[ 9.901] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 9.901] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 9.901] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Sep 26 16:32:35 2012
[ 9.950] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 9.967] (==) No Layout section. Using the first Screen section.
[ 9.967] (==) No screen section available. Using defaults.
[ 9.967] (**) |-->Screen "Default Screen Section" (0)
[ 9.967] (**) | |-->Monitor "<default monitor>"
[ 9.969] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 9.969] (==) Automatically adding devices
[ 9.969] (==) Automatically enabling devices
[ 10.002] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 10.002] Entry deleted from font path.
[ 10.006] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 10.007] Entry deleted from font path.
[ 10.007] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 10.007] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 10.007] Entry deleted from font path.
[ 10.007] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 10.007] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 10.007] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 10.007] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 10.007] (II) Loader magic: 0x7c8b00
[ 10.007] (II) Module ABI versions:
[ 10.007] X.Org ANSI C Emulation: 0.4
[ 10.007] X.Org Video Driver: 12.1
[ 10.007] X.Org XInput driver : 16.0
[ 10.007] X.Org Server Extension : 6.0
[ 10.008] (--) PCI:*(0:3:0:0) 10de:0141:107d:200d rev 162, Mem @ 0xcc000000/67108864, 0xd0000000/268435456, 0xcb000000/16777216, BIOS @ 0x????????/131072
[ 10.008] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 10.008] (II) LoadModule: "extmod"
[ 10.018] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 10.033] (II) Module extmod: vendor="X.Org Foundation"
[ 10.033] compiled for 1.12.4, module version = 1.0.0
[ 10.033] Module class: X.Org Server Extension
[ 10.033] ABI class: X.Org Server Extension, version 6.0
[ 10.033] (II) Loading extension MIT-SCREEN-SAVER
[ 10.033] (II) Loading extension XFree86-VidModeExtension
[ 10.033] (II) Loading extension XFree86-DGA
[ 10.033] (II) Loading extension DPMS
[ 10.033] (II) Loading extension XVideo
[ 10.033] (II) Loading extension XVideo-MotionCompensation
[ 10.033] (II) Loading extension X-Resource
[ 10.033] (II) LoadModule: "dbe"
[ 10.033] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 10.034] (II) Module dbe: vendor="X.Org Foundation"
[ 10.034] compiled for 1.12.4, module version = 1.0.0
[ 10.034] Module class: X.Org Server Extension
[ 10.034] ABI class: X.Org Server Extension, version 6.0
[ 10.034] (II) Loading extension DOUBLE-BUFFER
[ 10.034] (II) LoadModule: "glx"
[ 10.034] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 11.016] (II) Module glx: vendor="NVIDIA Corporation"
[ 11.016] compiled for 4.0.2, module version = 1.0.0
[ 11.016] Module class: X.Org Server Extension
[ 11.016] (II) NVIDIA GLX Module 304.37 Wed Aug 8 20:16:03 PDT 2012
[ 11.016] (II) Loading extension GLX
[ 11.016] (II) LoadModule: "record"
[ 11.016] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 11.026] (II) Module record: vendor="X.Org Foundation"
[ 11.026] compiled for 1.12.4, module version = 1.13.0
[ 11.026] Module class: X.Org Server Extension
[ 11.026] ABI class: X.Org Server Extension, version 6.0
[ 11.026] (II) Loading extension RECORD
[ 11.026] (II) LoadModule: "dri"
[ 11.026] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 11.049] (II) Module dri: vendor="X.Org Foundation"
[ 11.049] compiled for 1.12.4, module version = 1.0.0
[ 11.049] ABI class: X.Org Server Extension, version 6.0
[ 11.049] (II) Loading extension XFree86-DRI
[ 11.049] (II) LoadModule: "dri2"
[ 11.050] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 11.050] (II) Module dri2: vendor="X.Org Foundation"
[ 11.050] compiled for 1.12.4, module version = 1.2.0
[ 11.050] ABI class: X.Org Server Extension, version 6.0
[ 11.050] (II) Loading extension DRI2
[ 11.051] (==) Matched nouveau as autoconfigured driver 0
[ 11.051] (==) Matched nvidia as autoconfigured driver 1
[ 11.051] (==) Matched nv as autoconfigured driver 2
[ 11.051] (==) Matched vesa as autoconfigured driver 3
[ 11.051] (==) Matched fbdev as autoconfigured driver 4
[ 11.051] (==) Assigned the driver to the xf86ConfigLayout
[ 11.051] (II) LoadModule: "nouveau"
[ 11.059] (WW) Warning, couldn't open module nouveau
[ 11.059] (II) UnloadModule: "nouveau"
[ 11.059] (II) Unloading nouveau
[ 11.059] (EE) Failed to load module "nouveau" (module does not exist, 0)
[ 11.059] (II) LoadModule: "nvidia"
[ 11.060] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 11.274] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 11.274] compiled for 4.0.2, module version = 1.0.0
[ 11.274] Module class: X.Org Video Driver
[ 11.300] (II) LoadModule: "nv"
[ 11.301] (WW) Warning, couldn't open module nv
[ 11.301] (II) UnloadModule: "nv"
[ 11.301] (II) Unloading nv
[ 11.301] (EE) Failed to load module "nv" (module does not exist, 0)
[ 11.301] (II) LoadModule: "vesa"
[ 11.301] (WW) Warning, couldn't open module vesa
[ 11.301] (II) UnloadModule: "vesa"
[ 11.301] (II) Unloading vesa
[ 11.301] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 11.301] (II) LoadModule: "fbdev"
[ 11.302] (WW) Warning, couldn't open module fbdev
[ 11.302] (II) UnloadModule: "fbdev"
[ 11.302] (II) Unloading fbdev
[ 11.302] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 11.302] (II) NVIDIA dlloader X Driver 304.37 Wed Aug 8 19:54:47 PDT 2012
[ 11.302] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 11.303] (++) using VT number 7
[ 11.317] (II) Loading sub module "fb"
[ 11.317] (II) LoadModule: "fb"
[ 11.317] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 11.330] (II) Module fb: vendor="X.Org Foundation"
[ 11.330] compiled for 1.12.4, module version = 1.0.0
[ 11.330] ABI class: X.Org ANSI C Emulation, version 0.4
[ 11.330] (II) Loading sub module "wfb"
[ 11.330] (II) LoadModule: "wfb"
[ 11.331] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 11.347] (II) Module wfb: vendor="X.Org Foundation"
[ 11.347] compiled for 1.12.4, module version = 1.0.0
[ 11.347] ABI class: X.Org ANSI C Emulation, version 0.4
[ 11.347] (II) Loading sub module "ramdac"
[ 11.347] (II) LoadModule: "ramdac"
[ 11.347] (II) Module "ramdac" already built-in
[ 11.366] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 11.366] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 11.366] (==) NVIDIA(0): RGB weight 888
[ 11.366] (==) NVIDIA(0): Default visual is TrueColor
[ 11.366] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 11.367] (**) NVIDIA(0): Enabling 2D acceleration
[ 13.308] (II) NVIDIA(GPU-0): Display (BenQ FP93GX (DFP-0)) does not support NVIDIA 3D
[ 13.308] (II) NVIDIA(GPU-0): Vision stereo.
[ 13.311] (II) NVIDIA(0): NVIDIA GPU GeForce 6600 (NV43) at PCI:3:0:0 (GPU-0)
[ 13.312] (--) NVIDIA(0): Memory: 262144 kBytes
[ 13.312] (--) NVIDIA(0): VideoBIOS: 05.43.02.64.68
[ 13.312] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 13.312] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 13.312] (--) NVIDIA(0): Valid display device(s) on GeForce 6600 at PCI:3:0:0
[ 13.312] (--) NVIDIA(0): CRT-0
[ 13.312] (--) NVIDIA(0): CRT-1
[ 13.312] (--) NVIDIA(0): TV-0
[ 13.312] (--) NVIDIA(0): BenQ FP93GX (DFP-0) (connected)
[ 13.312] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[ 13.312] (--) NVIDIA(0): CRT-1: 400.0 MHz maximum pixel clock
[ 13.312] (--) NVIDIA(0): TV-0: 400.0 MHz maximum pixel clock
[ 13.312] (--) NVIDIA(0): TV encoder: (null)
[ 13.312] (--) NVIDIA(0): BenQ FP93GX (DFP-0): 155.0 MHz maximum pixel clock
[ 13.312] (--) NVIDIA(0): BenQ FP93GX (DFP-0): Internal Single Link TMDS
[ 13.312] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 13.312] (**) NVIDIA(0): device BenQ FP93GX (DFP-0) (Using EDID frequencies has
[ 13.312] (**) NVIDIA(0): been enabled on all display devices.)
[ 13.312] (==) NVIDIA(0):
[ 13.312] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 13.312] (==) NVIDIA(0): will be used as the requested mode.
[ 13.312] (==) NVIDIA(0):
[ 13.312] (II) NVIDIA(0): Validated MetaModes:
[ 13.313] (II) NVIDIA(0): "DFP-0:nvidia-auto-select"
[ 13.313] (II) NVIDIA(0): Virtual screen size determined to be 1280 x 1024
[ 13.314] (WW) NVIDIA(0): Unable to support custom viewPortOut 1280 x 720 +0 +152
[ 13.328] (--) NVIDIA(0): DPI set to (85, 86); computed from "UseEdidDpi" X config
[ 13.328] (--) NVIDIA(0): option
[ 13.328] (--) Depth 24 pixmap format is 32 bpp
[ 13.338] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 13.338] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 13.338] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 13.338] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 13.338] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 13.338] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 13.338] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 13.338] (II) NVIDIA(0): Config Options in the README.
[ 13.338] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select"
[ 13.486] (II) Loading extension NV-GLX
[ 13.541] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 13.541] (==) NVIDIA(0): Backing store disabled
[ 13.541] (==) NVIDIA(0): Silken mouse enabled
[ 13.541] (==) NVIDIA(0): DPMS enabled
[ 13.542] (II) Loading extension NV-CONTROL
[ 13.542] (II) Loading extension XINERAMA
[ 13.542] (II) Loading sub module "dri2"
[ 13.542] (II) LoadModule: "dri2"
[ 13.542] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 13.542] (II) Module dri2: vendor="X.Org Foundation"
[ 13.542] compiled for 1.12.4, module version = 1.2.0
[ 13.542] ABI class: X.Org Server Extension, version 6.0
[ 13.542] (II) NVIDIA(0): [DRI2] Setup complete
[ 13.542] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 13.543] (--) RandR disabled
[ 13.543] (II) Initializing built-in extension Generic Event Extension
[ 13.543] (II) Initializing built-in extension SHAPE
[ 13.543] (II) Initializing built-in extension MIT-SHM
[ 13.543] (II) Initializing built-in extension XInputExtension
[ 13.543] (II) Initializing built-in extension XTEST
[ 13.543] (II) Initializing built-in extension BIG-REQUESTS
[ 13.543] (II) Initializing built-in extension SYNC
[ 13.543] (II) Initializing built-in extension XKEYBOARD
[ 13.543] (II) Initializing built-in extension XC-MISC
[ 13.543] (II) Initializing built-in extension SECURITY
[ 13.543] (II) Initializing built-in extension XINERAMA
[ 13.543] (II) Initializing built-in extension XFIXES
[ 13.543] (II) Initializing built-in extension RENDER
[ 13.543] (II) Initializing built-in extension RANDR
[ 13.543] (II) Initializing built-in extension COMPOSITE
[ 13.543] (II) Initializing built-in extension DAMAGE
[ 13.547] (II) Initializing extension GLX
[ 14.003] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 14.003] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 14.003] (II) LoadModule: "evdev"
[ 14.004] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 14.022] (II) Module evdev: vendor="X.Org Foundation"
[ 14.022] compiled for 1.12.3.901, module version = 2.7.3
[ 14.022] Module class: X.Org XInput Driver
[ 14.022] ABI class: X.Org XInput driver, version 16.0
[ 14.023] (II) Using input driver 'evdev' for 'Power Button'
[ 14.023] (**) Power Button: always reports core events
[ 14.023] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 14.023] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 14.023] (--) evdev: Power Button: Found keys
[ 14.023] (II) evdev: Power Button: Configuring as keyboard
[ 14.023] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 14.023] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 14.023] (**) Option "xkb_rules" "evdev"
[ 14.023] (**) Option "xkb_model" "evdev"
[ 14.023] (**) Option "xkb_layout" "fr"
[ 14.023] (**) Option "xkb_variant" "latin-9"
[ 14.076] (EE) Error loading keymap /var/lib/xkb/server-0.xkm
[ 14.076] (EE) XKB: Failed to load keymap. Loading default keymap instead.
[ 14.121] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 14.121] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 14.121] (II) Using input driver 'evdev' for 'Power Button'
[ 14.121] (**) Power Button: always reports core events
[ 14.121] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 14.121] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 14.121] (--) evdev: Power Button: Found keys
[ 14.121] (II) evdev: Power Button: Configuring as keyboard
[ 14.121] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
[ 14.121] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 14.121] (**) Option "xkb_rules" "evdev"
[ 14.121] (**) Option "xkb_model" "evdev"
[ 14.121] (**) Option "xkb_layout" "fr"
[ 14.121] (**) Option "xkb_variant" "latin-9"
[ 14.122] (II) config/udev: Adding input device Genius Multimedia Keyboard (/dev/input/event0)
[ 14.122] (**) Genius Multimedia Keyboard: Applying InputClass "evdev keyboard catchall"
[ 14.122] (II) Using input driver 'evdev' for 'Genius Multimedia Keyboard'
[ 14.122] (**) Genius Multimedia Keyboard: always reports core events
[ 14.122] (**) evdev: Genius Multimedia Keyboard: Device: "/dev/input/event0"
[ 14.122] (--) evdev: Genius Multimedia Keyboard: Vendor 0x458 Product 0x708
[ 14.122] (--) evdev: Genius Multimedia Keyboard: Found keys
[ 14.122] (II) evdev: Genius Multimedia Keyboard: Configuring as keyboard
[ 14.122] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input0/event0"
[ 14.122] (II) XINPUT: Adding extended input device "Genius Multimedia Keyboard" (type: KEYBOARD, id 8)
[ 14.122] (**) Option "xkb_rules" "evdev"
[ 14.122] (**) Option "xkb_model" "evdev"
[ 14.122] (**) Option "xkb_layout" "fr"
[ 14.122] (**) Option "xkb_variant" "latin-9"
[ 14.123] (II) config/udev: Adding input device Genius Multimedia Keyboard (/dev/input/event1)
[ 14.123] (**) Genius Multimedia Keyboard: Applying InputClass "evdev keyboard catchall"
[ 14.123] (II) Using input driver 'evdev' for 'Genius Multimedia Keyboard'
[ 14.123] (**) Genius Multimedia Keyboard: always reports core events
[ 14.123] (**) evdev: Genius Multimedia Keyboard: Device: "/dev/input/event1"
[ 14.123] (--) evdev: Genius Multimedia Keyboard: Vendor 0x458 Product 0x708
[ 14.124] (--) evdev: Genius Multimedia Keyboard: Found keys
[ 14.124] (II) evdev: Genius Multimedia Keyboard: Configuring as keyboard
[ 14.124] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.1/input/input1/event1"
[ 14.124] (II) XINPUT: Adding extended input device "Genius Multimedia Keyboard" (type: KEYBOARD, id 9)
[ 14.124] (**) Option "xkb_rules" "evdev"
[ 14.124] (**) Option "xkb_model" "evdev"
[ 14.124] (**) Option "xkb_layout" "fr"
[ 14.124] (**) Option "xkb_variant" "latin-9"
[ 14.125] (II) config/udev: Adding input device ImExPS/2 Logitech Explorer Mouse (/dev/input/event5)
[ 14.125] (**) ImExPS/2 Logitech Explorer Mouse: Applying InputClass "evdev pointer catchall"
[ 14.125] (II) Using input driver 'evdev' for 'ImExPS/2 Logitech Explorer Mouse'
[ 14.125] (**) ImExPS/2 Logitech Explorer Mouse: always reports core events
[ 14.125] (**) evdev: ImExPS/2 Logitech Explorer Mouse: Device: "/dev/input/event5"
[ 14.125] (--) evdev: ImExPS/2 Logitech Explorer Mouse: Vendor 0x2 Product 0x6
[ 14.125] (--) evdev: ImExPS/2 Logitech Explorer Mouse: Found 9 mouse buttons
[ 14.125] (--) evdev: ImExPS/2 Logitech Explorer Mouse: Found scroll wheel(s)
[ 14.125] (--) evdev: ImExPS/2 Logitech Explorer Mouse: Found relative axes
[ 14.125] (--) evdev: ImExPS/2 Logitech Explorer Mouse: Found x and y relative axes
[ 14.125] (II) evdev: ImExPS/2 Logitech Explorer Mouse: Configuring as mouse
[ 14.125] (II) evdev: ImExPS/2 Logitech Explorer Mouse: Adding scrollwheel support
[ 14.125] (**) evdev: ImExPS/2 Logitech Explorer Mouse: YAxisMapping: buttons 4 and 5
[ 14.125] (**) evdev: ImExPS/2 Logitech Explorer Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 14.125] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input5/event5"
[ 14.125] (II) XINPUT: Adding extended input device "ImExPS/2 Logitech Explorer Mouse" (type: MOUSE, id 10)
[ 14.137] (II) evdev: ImExPS/2 Logitech Explorer Mouse: initialized for relative axes.
[ 14.137] (**) ImExPS/2 Logitech Explorer Mouse: (accel) keeping acceleration scheme 1
[ 14.137] (**) ImExPS/2 Logitech Explorer Mouse: (accel) acceleration profile 0
[ 14.137] (**) ImExPS/2 Logitech Explorer Mouse: (accel) acceleration factor: 2.000
[ 14.137] (**) ImExPS/2 Logitech Explorer Mouse: (accel) acceleration threshold: 4
[ 14.138] (II) config/udev: Adding input device ImExPS/2 Logitech Explorer Mouse (/dev/input/mouse0)
[ 14.138] (II) No input driver specified, ignoring this device.
[ 14.138] (II) This device may have been added with another device file.
[ 14.138] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[ 14.138] (II) No input driver specified, ignoring this device.
[ 14.138] (II) This device may have been added with another device file.
[ 14.305] (II) NVIDIA(GPU-0): Display (BenQ FP93GX (DFP-0)) does not support NVIDIA 3D
[ 14.306] (II) NVIDIA(GPU-0): Vision stereo.
[ 14.306] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 14.306] (**) NVIDIA(0): device BenQ FP93GX (DFP-0) (Using EDID frequencies has
[ 14.306] (**) NVIDIA(0): been enabled on all display devices.)
[ 19.774] (II) NVIDIA(GPU-0): Display (BenQ FP93GX (DFP-0)) does not support NVIDIA 3D
[ 19.774] (II) NVIDIA(GPU-0): Vision stereo.
[ 19.774] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 19.774] (**) NVIDIA(0): device BenQ FP93GX (DFP-0) (Using EDID frequencies has
[ 19.774] (**) NVIDIA(0): been enabled on all display devices.)
[ 41.273] (II) evdev: Power Button: Close
[ 41.273] (II) UnloadModule: "evdev"
[ 41.290] (II) evdev: Power Button: Close
[ 41.290] (II) UnloadModule: "evdev"
[ 41.293] (II) evdev: Genius Multimedia Keyboard: Close
[ 41.293] (II) UnloadModule: "evdev"
[ 41.300] (II) evdev: Genius Multimedia Keyboard: Close
[ 41.300] (II) UnloadModule: "evdev"
[ 41.303] (II) evdev: ImExPS/2 Logitech Explorer Mouse: Close
[ 41.303] (II) UnloadModule: "evdev"
[ 41.793] Server terminated successfully (0). Closing log file.
The error appear to be where it says
[ 14.076] (EE) Error loading keymap /var/lib/xkb/server-0.xkm
[ 14.076] (EE) XKB: Failed to load keymap. Loading default keymap instead.
This file (server-0.xkm) actually does not exist on the system, BUT: it also does not exist on my others Arch installations and it works fine, without errors.
By the way: here is the keyboard-entry in the /etc/X11/xorg.conf.d/10-evdev.conf
Section "InputClass"
Identifier "evdev keyboard catchall"
MatchIsKeyboard "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
Option "XkbLayout" "fr"
Option "XkbVariant" "latin-9"
EndSection
Et voilà. Can somebody help ?
Last edited by kero (2012-09-27 17:39:38)

Probably because "latin-9" doesn't exist?
# nano /usr/share/X11/xkb/symbols/fr
xkb_symbols "latin9" {
include "latin"
include "nbsp(level3)"
name[Group1]="French (legacy, alternative)";
key <TLDE> { [ oe, OE, leftdoublequotemark, rightdoublequotemark ] };
key <AE01> { [ ampersand, 1, dead_acute, periodcentered ] };
key <AE02> { [ eacute, 2, asciitilde, Eacute ] };
Try it without the dash (without the "-").
And don't forget to mark it as solved (by editing the first post).

Unable to edit the form in Personal Change Request

Hi,
One of the manager is trying to edit the employees information. When he navigates to edit form of personal change request, under My Crew tab of Manager Self Service in portal, unable to edit the information but he is able to add notes. in the form.
In detail, the manager is trying to assign new manager to an employee under him(moving an employee to differen team headed by different manager so trying to replace his name in the employee's informaton). The manage is unable to change the information or unable to edit any information in the form "request for change in position/transfer"
Could someone help me on this.
Thanks in advance.
Regards,
Ravi.
Edited by: Ravi Alla on Jun 17, 2010 9:15 PM

Hi,
The issue is resolved. This is because of Acrobat JavaScript option disabled in display preferences of the form.
Once this checkbox is enabled its working fine.
Regards,
Ravi.

Unable to open the physical standby in read only (10g)

Hi,
I m trying to create physical standby using RMAN to another server . But at the last step when trying to test Real Time Apply i m unable to open the standby in read only mode.Can Anyone please let me know whats the issue and how to resolve it
SQL> select status from v$instance;
STATUS
MOUNTED
SQL> alter database recover managed standby database using current logfile disconnect from session;
Database altered.
SQL> alter database recover managed standby database cancel;
Database altered.
SQL> alter database open read only;
alter database open read only
ERROR at line 1:
ORA-16004: backup database requires recovery
ORA-01152: file 1 was not restored from a sufficiently old backup
ORA-01110: data file 1:
'/u01/app/oracle/product/10.2.0/oradata/test1/system.dbf'

Hi,
This is a newly created standby. I created just now. Below the o/p requested
In Primary
SQL> set line 200
SQL> set pagesize 200
SQL> col message format a90
SQL> select severity, error_code, to_char(timestamp,'DD-MON-YYYY HH24:MI:SS'), message from v$dataguard_status where dest_id=2;
SEVERITY      ERROR_CODE TO_CHAR(TIMESTAMP,'D MESSAGE
Error              12541 04-MAR-2012 11:55:05 PING[ARC1]: Heartbeat failed to connect to standby 'test1'. Error is 12541.
Error              12541 04-MAR-2012 12:00:12 PING[ARC1]: Heartbeat failed to connect to standby 'test1'. Error is 12541.
Error               1034 04-MAR-2012 12:06:25 PING[ARC1]: Heartbeat failed to connect to standby 'test1'. Error is 1034.
Warning             3113 04-MAR-2012 13:21:24 ARC1: Attempting destination LOG_ARCHIVE_DEST_2 network reconnect (3113)
Warning             3113 04-MAR-2012 13:21:24 ARC1: Destination LOG_ARCHIVE_DEST_2 network reconnect abandoned
Error               3113 04-MAR-2012 13:21:24 PING[ARC1]: Error 3113 when pinging standby test1.
Warning             3113 04-MAR-2012 13:33:29 ARC1: Attempting destination LOG_ARCHIVE_DEST_2 network reconnect (3113)
Warning             3113 04-MAR-2012 13:33:29 ARC1: Destination LOG_ARCHIVE_DEST_2 network reconnect abandoned
Error               3113 04-MAR-2012 13:33:29 PING[ARC1]: Error 3113 when pinging standby test1.
Error               1034 04-MAR-2012 13:39:50 PING[ARC1]: Heartbeat failed to connect to standby 'test1'. Error is 1034.
Error               1034 04-MAR-2012 13:45:29 PING[ARC1]: Heartbeat failed to connect to standby 'test1'. Error is 1034.
Warning             3113 04-MAR-2012 13:57:56 ARC1: Attempting destination LOG_ARCHIVE_DEST_2 network reconnect (3113)
Warning             3113 04-MAR-2012 13:57:56 ARC1: Destination LOG_ARCHIVE_DEST_2 network reconnect abandoned
Error               3113 04-MAR-2012 13:57:56 PING[ARC1]: Error 3113 when pinging standby test1.
14 rows selected.
SQL> select     ds.dest_id id
,       ad.status
,       ds.database_mode db_mode
,       ad.archiver type
,       ds.recovery_mode
,       ds.protection_mode
,       ds.standby_logfile_count "SRLs"
,       ds.standby_logfile_active active
,       ds.archived_seq#
from    v$archive_dest_status   ds
,       v$archive_dest          ad
where   ds.dest_id = ad.dest_id
and     ad.status != 'INACTIVE'
order by
        ds.dest_id
/   2    3    4    5    6    7    8    9   10   11   12   13   14   15   16
        ID STATUS    DB_MODE         TYPE       RECOVERY_MODE           PROTECTION_MODE            SRLs     ACTIVE ARCHIVED_SEQ#
         1 VALID     OPEN            ARCH       IDLE                    MAXIMUM PERFORMANCE           0          0            64
         2 VALID     UNKNOWN         ARCH       UNKNOWN                 MAXIMUM PERFORMANCE           3          0            64In standby
SQL> select thread#,max(sequence#) from v$archived_log where applied='YES' group by thread#;
   THREAD# MAX(SEQUENCE#)
         1             64
SQL> select thread#,max(sequence#) from v$archived_log group by thread#;
   THREAD# MAX(SEQUENCE#)
         1             64
SQL> select message from v$dataguard_status;
MESSAGE
ARC0: Archival started
ARC1: Archival started
ARC1: Becoming the 'no FAL' ARCH
ARC1: Becoming the 'no SRL' ARCH
ARC0: Becoming the heartbeat ARCH
Attempt to start background Managed Standby Recovery process
MRP0: Background Managed Standby Recovery process started
Managed Standby Recovery starting Real Time Apply
Media Recovery Waiting for thread 1 sequence 63
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
MESSAGE
RFS[1]: Assigned to RFS process 9880
RFS[1]: Identified database type as 'physical standby'
Media Recovery Log /u01/app/oracle/product/10.2.0/archive/test1/1_63_776981781.arc
Media Recovery Log /u01/app/oracle/product/10.2.0/archive/test1/1_64_776981781.arc
Media Recovery Waiting for thread 1 sequence 65
16 rows selected.

Unable to Receive the Purchase Order

Hi Experts,
A PO is created with 44 units of a material. the 44 units are divided into 4 batches.When trying to do the goods receipt, it id not first prompt for any serial numbers.
Hence went ahead and did the goods receipt. But could not receive the PO yet.So cancelled the Goods receipt by doing the movement type 102.
When it was checked, the material in sending plant has a serial number profile assigned to it
and also the batch management has been checked.(in mm03) . So assigned the serial number profile in the receing plant too.
but it did not help.
can you suggest any possible solution for this?

I did not understand your story.
And I do not really know how you want it to be.
you are talking about sending plant and receiving plant, is your PO a stock transport order or just a standard PO?
do you use SD shipping or just MM movements to transfer the quantity between both plants?
do both plants belong to the same company or different companies?
you are talking about batches. batch managment can be activated at plant, mateial or client level, which level do you use?
if plant level, then the same material can be batch managed in one plant but not batch managed in the other plant.
you said you did the receipt, but did not receive the PO, then cancelled the receipt. this is a real weird sentence. Has this anything to do with your problem?
you are saying you are unable to receive the PO, I guess you talk about the quantity and a receipt in reference to the PO. Do you get any error message which prevents you from receiving.
you actually said you have done the recipt and cancelled it, so what do you mean by "unable to Receive" ?

Unable to reverse the GI of non-valuated material in Vl09

Hi All,
My user is unable to reverse the GI for the non-valuated material . The error message occurs " doc 4901151816 does not contain any selectable items".The given below the doc .flow.
The user did GI for 901 mov.type in VL02n . I have observed that there is no reverse mov.type for 901 in the system . Is the error occurs due to non-exist of the reversal mov.type?
Please advise.
Free of Charge 70219835 / 10
. Purchase order 2245102298 / 10
. Delivery Standard 80323135 / 10
.. WMS transfer order 11216908 / 1
.. Handling unit 348260 / 1
.. GD goods issue:delvy 4901151816 / 1

Hi,
Go to OMJJ and here for movement type "901", under option "Reversal/follow-on movement types" assign the reversal movement type as 602 or (902 copy of 602) and Type of Posting as "2" (Reversal(qty cannot be entered; gener.of matchcode))
And Reverse in VL09.

Unable to reuse the de assigned HU in Inbound Delivery

Similar Messages

Maybe you are looking for