Unable to reverse PGR for return delivery (RL).
Prerequisites:
WM managed storage location w/o HU and SU
Document flow
1. Sales order
2. ODB
3. TO
4. PGI
5. Invoice
6. Return sales order in reference to invoice from step 5
7. Return delivery RL
8. TO: Materials put away from interim 904 storage type to warehouse storage type
9. PGR
10. VL09: Reversing goods movement (step 9) for RL delivery (step 7)
In step 10 I am getting error:
Message no. L9009: Storage bin PL1 904 8200000192 does not exist (check your entry).
I have made work around:
1. LS01N: Creation storage bin (904/8200000192)
2. VL09: now it is OK
3. LT10: from WH storage type to 904/8200000192
4. Delivery status (Picking) is not refreshed (like in LT0G)
It works but in my opinion it is another scenario for this.
My question is how to reverse PGR for RL return delivery (without work around I described)?
Andrzej
Hi Csaba,
1. L9005 message
thank you very much for you response. As I wrote, now I have no problems with L9009 message (I was blind not to notice such obvious settings in V_T321 and V_T333)
Before i wrote this message I have double checked this configuration. But I have did not notice bad setting. Now VL09 works OK.
The open problem is that delivery still has picking/WM status not refreshed.
I've made nearly the same settings that you proposed. I am a little bit confused that you wrote:
if I do not enter '1' in RBLVS I get error message L9005
RBLVS is a "RefMvtType WM" and you set it to 656. You probably mean BSLVS - Special stock indic.
I have following settings:
LGNUM;RBLVS;BSLVS;KZBEW;SOBKZ;BSSKZ;LGREF;BWLVS
PL1;658;;L;;;;652
In my case BSLVS='' (but our cases are little bit different)
2. picking/WM status not refreshed
I have made work around with deleting delivery/delivery items.
As we noticed standard SAP system is not set to manage the reversal of return delivery with WM
Thank you for confirming my doubts.
Andrzej
Similar Messages
-
CIN process to enter Excise Invoice for Return Delivery
Folks
I would like to know How to process excise invoice for return delivery. We have return sales order, return delivery created and product is received into inventory Customer return Blocked stock (movement 657).
Where and How can i enter Excise invoice for this return (Credit Memo)?
I tried J1IH transaction--> Other Adjustments
I am getting following error.
GL account has not been assigned for RG23ASED in customization
Message no. 8I447
Diagnosis
GL account has not been assigned for the excise a/c in customization
Procedure
Assign GL a/c for the excise a/c in CIN customization under : Accounting -> Assign GL accounts to excise groups and transaction types"
Please helpJ1IIN is intended only for outgoing sales and not for returns.
For updation of excise related sales returns, run J1IH and do the following:-
Customer Credit
Choose the Additional excise input the original excise invoice reference, document year, company code, plant and excise group and execute. There input manually what value you need to give credit and save.
Cenvat Debit
Choose Other Adjustment and here also, maintain the datas whatever you input as above and save.
G. Lakshmipathi -
Output type for Proforma Invoice for return delivery from delivery type RLN
Client require Output type Proforma Invoice for return delivery to vendor. As such return item category is not relevant for pricing so from delivery to proforma invoice can not have with p-ricing. I got quantity correct but pricing is coming Zero.
Client have ZPAC as packing list output type from delivery which shows quantity and pricing. So decided to use the same logic to pull pricing for proforma invoice from delivery.
Here delivery has standard output ZPAC as packing list with access sequence Z002 as Delivery Type.
I want to pop up output type for all return delivery so using access sequence with delivery type/vendor.
Vendor filed does not exist in delivery output type so brought that firld LIFNR.
It is assigned to procedure and maintained ZPRO output type for Proforma invoice. Asigned VV21 on front end.
Problem Still automatic output type ZPRO is not poping up. What type of access sequence will help me to pop up or what in configuration am I miising?
Appreciate help for solution at earliest.Hi Padamsree,
I know Pricing & output very well. I need profomra invoice to be printed with quantity & value for return goods to the vendor. Pricing is associated with Item category RLLN for delivery type RLL which is return type delivery.
I need to have pricing in my Proforma invoice which is copied from delivery to billing document VTFL. Just check well how it is working in the system & if you know please answer so that it should be workable on the system. As theoretical answer may not be helpful. Appreciate for your time.
Thanks -
Problem with pgi for returns delivery
Hi,
I'm trying to do PGI for returns delivery through BAPI_GOODSMVT_CREATE.
The when the delivery is opened through VL02N, the Post Goods Issue button has Post Goods Receipt text written on it. When the GI is done, the material document has movement type 651.
However I'm not able to create the same through the BAPI. I have tried various combinations of GM_CODE and all other variables. Have anybody of you tried doing movement type 651 for a returns delivery using the same BAPI?
Please reply if you've come across some similar situation. I know how to use the BAPI, I've been using it successfully for other movement codes etc. It's only in this case that I'm stuck up.
Regards,
VijayHi Vijay,
can u pls tell me how did u do it....i am also having the same requirement....
Developed a custom program for creating and updating Goods Movement Document by using BAPI_GOODSMVT_CREATE & WS_DELIVERY_UPDATE_2.
thanks, Ankita. -
Batch settings for return delivery
Hi,
Can anybody give advise on batch settings for return delivery.
RegardsHi,
Maintain copy control for billing documents.T.code(VTFL)
Target billing doc
RE
From Delivery Type
LR
Copying requirements
003
1.In the Item Overview screen, choose New Entries and make the following entries:
ItemCt REN
Target Bill. Type RE
Copying requirements 004
Data VBRK/VBRP 001
Update flow
Billing quantity G
Pos./neg. quantity +
Pricing type G
Hope this helps
Regds.......
Sumit
Edited by: Sumit Rayaguru on Feb 23, 2009 10:03 AM
Edited by: Sumit Rayaguru on Feb 23, 2009 10:05 AM -
Bapi for return delivery of rejected goods
Hi experts,
can you tell me is there is any bapi for return delivery of rejected goods at transaction QA11?
thanksHi,
You need to use FM BAPI_PO_CREATE to create the return delivery.you have to manually the rejected goods.....
CALL FUNCTION 'BAPI_PO_CREATE'
EXPORTING
po_header = pohead
po_header_add_data = po_header_add_data
header_add_data_relevant = header_add_data_relevant
skip_items_with_error = 'X'
IMPORTING
purchaseorder = purchaseorder
TABLES
po_items = po_items
po_item_schedules = sched
return = return
po_business_partner = businesspartner.
Reward points if helpful,
regards,
jinesh. -
Rejection for return delivery - Confirmation
Hi all,
While i'm doing "return delivery" system should ask 'Rejection
for return delivery'( like poor quality etc..) but, without this
indicator i can confirm the return delivery.
How to make this field as a mandatory ( rejection for return del)
Return deliery > Item > notes and attachment > rejection for rtn del
Thanks and regard
HareeshaHi,
You can implement the BADI "BBP_DOC_CHECK_BADI" to make the field mandatory.
BR,
Disha.
Pls reward points for useful answers. -
Miro for return delivery mvt 122
Hi experts
I m doing miro ( credit memo ) for return delivery with mvt 122.
in this case it is not bringing the quantity and amount of which i have made the return delivery.
but it is bringing whole quantity and amount of PO.
Please help how can i get the amount of return delivery in credit memo automatically.hi
if you have already posted the invoice then dont go by the movement type 122
the better way is to create an return Po with same vendor and material as before and in ME21N flag on the indicator return at item level.
Then do the vendor return wrt to the return PO using trax MIGO the system will use the movement type 161 here post the document
Then go to the MIRO trax and Post the credit memo.
Award if usefull
Regards
Sujoy -
What is t-code for return delivery to supplier ?
what is t-code for return delivery to supplier ? I understand it can also be done through MIGO.
And how can I get delivery number so that I can create invoice to send to vendor.Hi,
If the Recieved material for any reason is rejected and needs to send back to Vendor.
There is 2 options.
1) At the time of GR if the material is rejected you can make return delivery in MIGO using Movement type 122 .
with reference to this 122 document you can send the material back to vendor immidiatly.
2)If the Material is accepted and Vendor invoice also processed and material is at production then if the material found rejected
you need to create the Return PO for that vendor.
Using ME21N enter all the details like Std PO and at item overview you need to select the check box Return.
So the PO gets created.
Against this returns PO you need to do the Goods reciept.
So system will take movement type 161 automatically and your inventory stocks will goes less for that quantity.
You need to raise the credit memo to debit the Vendor account in MIRO or any other process.
So that your account also matched with qty & Value
Then you send the Credit memo details to vendor along with material to the vendor.
rgds
Chidanand -
Billing problem for return delivery
Hi Guru's
While cretaing Billing for return delivery ,Excise duties were not picked in the billing .Wat may be the reason..
rgds,
subramanyam.Hi,
Kindly refer the SAP note 304290 which will help you out. There are many SAP notes for the Return.
889951
794940
789140
Regards,
Murali -
Different shipping point for returns delivery
How do i assign a different shipping point for returns delivery when the material was actually shipped from another shipping point?
Hi Salag,
As our expert suggested by using 2 shipping point you can create delivery. Delivery will create based on single shipping point.
In you scenario if you want to ship the return goods with different shipping point then go with new configuration.
For Normal sales order OR maintain the shipping condition 01 in the respective sales document type OR
For returns order maintain the shipping condition 02 in the respective sales document type RE.
When comes to shipping point determination shipping point will determine based on
Order: SC Loading Group Plant -- Proposed S.P -- Manual S.poimt
OR : 01 0001AAAA -
> XXXX --- YYYY
RE : 020001AAAA -
> YYYY
If you don't want to go with different SC then manually change the Shipping Point in Returns sales order before creating delivery.
I hope it reaches to ur requirement. revert in case of any query..
Regards
Durga Sana -
Change of Movement type for Return delivery of Goods Issue doc in config
Hi SAP Gurus,
I am doing return delivery of goods issue document.then the system automatically pick the movement type
Like Example i am doing return delivery for Goods issue 201,the system should pick 202 but instead of 202 its picking 902 movement type which i defined.
Where exactly i have to change in configuration please let me know....
Thanks,
SivakumarIn OMJJ, check the reversal movement maintained for the one your facing the issue.
If any further clarification is required, revert.
If helpful award points
Regards,
Vivek -
Capture Excise Invoice for Returns delivery
Dear friends,
Once the returns sales order is created and followed by returns delivery, we need to capture the excise invoice for it. Can anyone kindly guide this process. What will be the T.code for capturing excise invoice in this scenario and pls explain the process.
Points assured
regards
Krishna.CHi,
We have had the same problem way back in 2003. But SAP has suggested to post a manual JV entry through J1IH or through J1IS. I dont remember which one of the above 2 transactions we have used.
Also have a look at the SAP notes.
Kind Regards
Chakradhar -
Problem while doing PGI for Returns Delivery
Hi,
We are facing some problem which doing PGI for a returns delivery. Our scenario is HU and WM managed. After creation of delivery I have created a TO and has two different valuation type of same material. Total quantity in TO is 2, 1 of each valuation type. So, automatically, batch split happened for the line item in delivery.
Now when I am trying to do PGI for this delivery, I get en error message saying "Enter Valuation Type". The movement type used here is 161 (Vendor Returns)
Same thing is happening successfully for movement type 643 (Transfer inter company code). What I can gather is that while creating 161 document against delivery system is not automatically taking the valuation types mentioned in line item of delivery.
Let me know possible reasons for this error and resolution.
Regards,
VishalImplement the OSS note 965985
-
Automatic Batch number for rETURN Delivery
When creating a return delivery, without reference, we need to manually input the batch number (assign dummy?).
Is it possible to have the system automatically generate the batch number for returns? If yes, how?Hi,
No you can' not
even if you try to create Return delivery without refrance to any order then it will determine item category,but gives error that,
YOU CAN NOT ADD THIS ITEM IN DELIVERY
because it is controlled by delivery document category
the delivery document category is - T (Returns delivery for order)
Kapil
Maybe you are looking for
-
Performance degradation. Need advice on starting all over again.
I have never formatted my drive or reinstalled my OS X like I used to do with XP during the windows days. Now there is some performance degradation and opening of applications like Safari, iPhoto and others is really slow. I maintain Time Machine bac
-
Dented my Macbook Pro and now it won't start up. Please Help!
Hello. I have searched and searched and cannot find a solution. Last night I was putting the finishing touches on my dissertation and accidentally dropped a tape dispenser on my 1-year-old MacBook Pro - it hit just to the left of the trackpad and lef
-
HT5312 how can you get a rescue email sent .
cant seem to find link to send rescue email HELP!!!!
-
Count of rows having different values
SQL> select * from med; CERT REC PRIM RACE 100 10 EN USA 100 11 EN USA 100 12 EN USA 100 13 SP MX 200 14 SP MX 200 15 SP MX 6 rows selected. SQL> select * from sub; CERT REC PRIM RACE 100 10 EN
-
Ios version5 for ipod touch?
How do you get this lastest version for your ipod touch?