Unable to revert back to an old BIOS?

I updated my Neo Platinum's BIOS from 1.1 to 1.3 in attempts to resolve the temperature issue, but it only resulted in BSOD's when loading Windows XP. I reverted back to 1.1, and everything was fine again. I then tried the beta 1.45 BIOS, and got BSOD's again. When I tried to revert back to 1.1, the flash utility gave me a message that the chip was write protected. As far as I know, there is no write protection .
I've tried using different versions of the flash utility, messing around with hardware, and reinstalling Windows. Nothing works. What the deuce can I do to resolve this issue?! The BSOD I get is a generic one that doesn't specify anything. The only conflict I can see is the A-Data PC4200, although some say that they work wel with this board. How can I get around this?

Bah!! I finally managed to get it. All I had to do was add the /f command to the end of the prompt. To whomever wrote the installation instructions, this was the most complicated BIOS flash I have ever gone through. I shall forever stick to my floppy diskettes and DOS. LiveUpdate will not become a part of my system ever again.

Similar Messages

TS5223 After my iphone updated to ios7, it reverted back to my old icloud account which I do not know the password, do not have access to the email it sends the reset to and the reset for security options say my birthday information is wrong.

Help!!! I've lost all of my contacts and information after the ios7 update. After the update I plugged my phone into my MacBook and it reverted back to my old icloud account. I checked my MacBook and everything on there is connected to my new icloud account. I'm not sure why this has happened, but I have been trying for two days to get my new icloud account back. My phone won't allowe to log out of the icloud account it is logged into because I don't know the password. Simple solution, reset the password. Not so simple. I don't have the email address associated with the account anymore. So I attempted the security question option. When I entered my birthdate, it said that it was incorrect. I have tried multiple times and nothing will work. Can someone please help me??

If you don't know your password, don't know your security questions and don't have a rescue address or don't receive a reset email, you should contact AppleCare who will initially try to assist you with a reset email or if unsuccessful will pass you to the security team to reset your security questions for you.
If you are in a region that doesn't have international telephone support try contacting Apple through iTunes Store Support.

I recently changed my password to my apple id and was able to log into everything fine except the icloud on my ipad. It reverted back to an old apple id and I don't know the password. I have tried all the suggestions and no luck.

I recently changed my password to my apple id and was able to log into everything fine except the icloud on my ipad. It reverted back to an old apple id and I don't know the password. I have tried all the suggestions and no luck.

You didn't say what you've tried, but f the old ID is an earlier version of your current ID, temporarily recreate the old ID by going to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iDevice, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll. When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

HT1399 I just downloaded the newest version of itunes, and when I connect my ipod nano (3rd gen), I can no longer see my playlists (on the left hand side). I hate the new format...any way to revert back to the old one?

I just downloaded the newest versionof itunes. Now when I plug in my ipod, I can no longer see my playlists (listed on the left hand side). The new format is very confusing! How do I drag and drop songs into specific playlists I have? Is there a way to revert back to the old itunes?

I had the same question. Someone answered perfectly here post https://discussions.apple.com/message/20575126#20575126
The answer was click View > Show sidebar. Devices and playlists will display in the left sidebar once again.

My iPad Air will not recognize my newest Apple ID e-mail address for cloud access. It continually reverts back to an old e-mail address that I no longer have access to and don't remember the PW for. How can I fix this?

My iPad Air will not recognize my newest Apple ID e-mail address for cloud access. It continually reverts back to an old e-mail address that I no longer have access to and don't remember the PW for. How can I fix this?

Didn't work but thx
Mark Flohr
[email protected]
949-636-3069

When I enter events in my calendar to quickly, when it auto-syncs it will revert back to my old event.

When I enter events in my calendar to quickly, when it auto-syncs it will revert back to my old event.
If I have two calendars in use, if I use one (say red "home") and decide I want to change it to another (say green "work") it will revert back
I've called Apple, been in the store to meet numerous "geniusus" and no one can figure it out. Most apple assistants tell me over the phone that "that is not possible", well it is possible and the so-called "geniuses" have seen and confirmed it is possible but to this point the only thing "impossible" is solving the problem.
NOTHING MORE FRUSTRATING THAN PUTTING AN APPOINTMENT IN MY CALANDAR ONLY TO MISS IS BECAUSE OF AN APPLE ERROR

Naughty,
You are posting a Pages question in the Numbers forum. I am going to ask thie be moved to the Pages forum. In addition please post a screenshot. Based on playing with a chart in Pages, I do not think the charts take their input from a table, but rather, you enter the data by clicking the chart (to activate it), then clicking the button "Edit Chart Data":
manually editing the entries in the table:
I would think you want to have a table in Numbers to create the data, then copy and paste the data into the data table for the chart (I wouldn't type it in)

Even via time machine the new osx lion has deleted all my latest files in iPhoto and will only revert back to an old 2009 backup?

even via time machine the new osx lion has deleted all my latest files in iPhoto and will only revert back to an old 2009 backup?... Help?!

Have you verified that the original files are missing from the Originals/Masters folder? There are time when the library might appear empty due to a damaged database file but still has the files. If you can open the library package via the Finder to see if the files are really missing or just can't be seen by iPhoto there are fixes you can try.
If the files are there make a temporary, backup copy of the library and apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Select the options identified in the screenshot.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

Hi, I want to revert back to my old apple id password (6 digits). The complicated password now is not very user friendly to me.

Hi, I want to revert back to my old apple id password (6 digits). The complicated password now is not very user friendly to me.

Sorry I misinterpreted what it was that you want to do. The following gives the current password requirements: Security and your Apple ID - Apple Support
There isn't any way to have a 6 digit numerical password -- as you already found. With the amount of password hacking going on currently, I suspect that if you were able to change it back you would be putting your account at a significant risk. You are being forced, but I think Apple is doing that with good intentions and that it is in your interest. You can complain (provide feedback) at https://www.apple.com/feedback/icloud.html

I have downloaded the latest version of safari only to be told that i can not use it on my version of os x (10.7.5). Is there any way to to revert back to the old safari.

i have downloaded the latest version of safari only to be told that i can not use it on my version of os x (10.7.5). Is there any way to to revert back to the old safari.

Safari is part of OS X and isn't available as a separate download. How did you get a newer version than the one that comes with Lion?

When I set my homepages, they always revert back to my old ones whenever I restart Firefox, why is this?

I have tried to reset my homepages multiple times and every time I restart Firefox they always revert back to my old homepages; Why is this and how do I stop it??

The [[preferences are not saved]] article should help you with this.

HT3529 My icloud account keeps reverting back to my old account on my iPhone?

Why does my newly created Apple iCloud account keep reverting back to my old account, which happens to be my ex husbands email?

Sign out of the account on the device and sign in with the new account.
Just keep in mind that purchases and content are permanently tied to the account they were acquired with.

How to revert back to the old code in NWDI ??

Hi,
I have done some changes to one of the DC and have released the activities and imported that in consolidation tab in transport studio of CMS.
Now my client do not want the changes we did, and he is asking me to revert back to the code that was prior to my changes.
I want to know how to do this in dev. and Qa system, as we have moved our changes to QA also.
What i have done is, i went to consolidation tab (in transport studio), i, went to "go history" and i have selected the activity that was imported to consolidation just prior to my activities, and than i clicked on import button. and than i went to assembly tab and i assembled that activity.
than i went to Qa portal, but still its showing my changes only, its not showing changes that was made prior to me.
What i m missing here?? and how to restore old code in dev and Qa system ??
please help
regards
vikas

HI,
you can get back the changes done in an activity as a local copy in the following way:
go to CBS web UI, click on compartments link'
under that search for your DC, and click on view all link.
you find all the activities under that DC. copy the integration time .
switch to DTR perspective,
righ tclick on the DC, choose Advanced sync, sync to date, give the integration time you got from CBS and click on ok.
Regards,
Satya.

Unable to revert back to simple passcode

i tried to turn off the simple passcode just to see how the non-simple passcode works. i dont like it much so i want to revert back to the simple passcode but the on/off button is disabled as well as the button to turn off the passcode..
please help on how i can revert back to the simple passcode.
Thanks

MichaelTang,
I tried it again on my iPhone and it still works with the latest iOS. If you are connected to company email, they may have a policy enabled requiring non-simple passcodes. If that is the case, you can try removing that company email and then setting the simple passcode.
I also tried another method, which now works probably due to one of the many upgrades in the last 6 months. With a non-simple passcode set, you can slide the "Simple Passcode" and it will prompt for the old passcode, then give you the option to enter the new simple passcode twice for verification.
Hope this helps,
-mrsube

Revert Back to the old status from newif error occurs in ServiceDesk Ticket

Go to transaction CRM_DNO_MONITOR. Select a ticket for display. Let the status of the selected ticket be NEW. Now input all information in standard and screen Enhancement(By EEWB) input fields. Now make an action 'assign' After saving the status will change to Assign. But at the same time there is a screen validation dependant on the status change from New to assign. According to that the validation happens in PBO event of the Screen enhancement where we are getting Old as well as new status. Here it is found that remarks in long text is to be entered while this perticular status change is happening. but the same is not done. So there is a error message that 'you have not entered remarks general'.
When the error occurs the status should change back from assign to New. Since user may go out of ticket without saving Or the error pop up will throw you out of ticket. When the user again opens the same ticket, the status of the ticket is Assign. So there should be a BADI or open routine available after before the update to database happens for the new status. Also this enhancement should happen after Screen Enhancement(By EEWB)'s PBO event. So validation of screen enhancement can be carried out.
In short please provide enhancement or routine or function module which can revert back to old status.

Although it might be manifesting itself slightly differently in LP8, I just wanted to chime in here and say that I've had that problem with LP7 as well. I import a lot of mp3's, and most of them work, but every once in a while it would get confused and I'd see that message. It's been a while so I don't remember specifically what I did, but I do know that with a little tweaking of the name it will work fine. If memory serves, when the file in question had the suffix actually in the name itself (filename.mp3), I'd just take the suffix out and it would recognize it. Although it could have been the other way around, adding the suffix to an mp3 file that DIDN'T have it in the name. Point is, it was an easy fix, and with a little name tweaking LP7 was able to understand. Hopefully that's all it will take with LP8 too.
Good Luck!

How do I revert back to the old operating system? The new upgrade that came out totally disabled my WiFi and the default backgrounds changed to white instead of bla k.

An upgrade was sent to my Samsung Galaxy S5 phone on 3/27/15 and it ruined my phone. I no longer have the ability to Wi-Fi. When I swipe the phone on there is a clicking sound and the scree goes directly to my keypad. I want the phone to go to my home screen like it did before. My apps that had a black background now have a white background which is impossible to see outdoors. I want the black background back for settings, clock, and calculator. Samsung tech support says this stuff is default with the new upgrade. How do I revert back to the version I had before without having to put the phone back to factory settings and lose all my pictures, memos and other files I have accumulated over the last year that I have had the phone. I am desparate. Please help me. Send an e-mail to (removed)
>> Edited to comply with the Verizon Wireless Terms of Service <<
Message was edited by: Verizon Moderator

You cannot revert back without voiding warranty and we cannot discuss the methods to do so.

Unable to revert back to an old BIOS?

Similar Messages

Maybe you are looking for