Unable to run Cisco IP Communicator

I am trying to run Cisco IP communicator while connected to my Wifi network at home (Verizon Fios) but something in the router is blocking it. I am successfully able to run it using Wifi on other Internet services(UVerse, TimeWarner). Could you please let me know :
- how do we configure firewall/access rules in Wifi or disable all the firewall/access rules for testing ?
- how to configure router to run this application ?

Perhaps you need to forward the ports that it uses?
I point to http://www.portforward.com/english/routers/port_forwarding/Westell/A90-750015-07/A90-750015-07index....
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

Similar Messages

Service Profiles and Cisco Unified Communications

Hi All,
I need some information on Service Profile configuration for ESXi hosts that will be running Cisco Unified Communications Manager and associated applications (Unity Connections and Presence)
The B-Series Chassis will initially host 2 B200M2 blades for this purpose and I'm after best practice for the Service Profiles. The blades are running the M81KR Virtual Interface Card.
Any help is appreciated, or if someone can point me in the direction of the documentation that would also be appreciated.
Cheers
Darren

It's quite straightforward:
- you must boot from local disk
- bundle your local drives in a RAID-1 group
- assign a pair of vHBAs to your profile for connectivity to your FC SAN (one to SAN "A", one to SAN "B")
- as far as networking in concerned, you have "carte blanche" (UC VMs use a single nic and Nexus 1000V is optional)
--> you could for instance create 6 vnics: 2 for service console, 2 for vmotion, 2 for vmdata. Or just 2 vnics and have Nexus 1000V "own" them. Any other scheme you find suitable is ok.
Most restrictions aren't on the UCS side but rather on specific VMware features currently supported by the solution.
See
http://www.cisco.com/en/US/prod/collateral/voicesw/ps6790/ps5748/ps378/solution_overview_c22-597556.html
http://docwiki.cisco.com/wiki/Unified_Communications_VMWare_Requirements
The OVA templates for the UC VMs are at http://docwiki.cisco.com/wiki/Unified_Communications_Virtualization_Downloads_%28including_OVA/OVF_Templates%29 --> you'll get an idea of storage capacity and vCPU requirements

Unable to Run/Deploy the Application

JDev 11.1.2.1.0 ADF BC
I am unable to run my application and it gives the below log:
*** Using HTTP port 7101 ***
*** Using SSL port 7102 ***
C:\Users\Administrator\AppData\Roaming\JDeveloper\system11.1.2.1.38.60.81\DefaultDomain\bin\startWebLogic.cmd
[waiting for the server to complete its initialization...]
JAVA Memory arguments: -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m
WLS Start Mode=Development
CLASSPATH=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jdbc_11.1.1\ojdbc6dms.jar;C:\Oracle\MIDDLE~1\patch_wls1035\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\patch_jdev1112\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\JDK160~1\lib\tools.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.jar;C:\Oracle\MIDDLE~1\modules\features\weblogic.server.modules_10.3.5.0.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\webservices.jar;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.1/lib/ant-all.jar;C:\Oracle\MIDDLE~1\modules\NETSFA~1.0_1/lib/ant-contrib.jar;C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrf.jar;D:\Sahar Hassan\sqljdbc4.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\xqrl.jar
PATH=C:\Oracle\MIDDLE~1\patch_wls1035\profiles\default\native;C:\Oracle\MIDDLE~1\patch_jdev1112\profiles\default\native;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\bin;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.1\bin;C:\Oracle\MIDDLE~1\JDK160~1\jre\bin;C:\Oracle\MIDDLE~1\JDK160~1\bin;D:\oracle\product\10.2.0\db_1\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files\Microsoft SQL Server\100\Tools\Binn\;C:\Program Files\Microsoft SQL Server\100\DTS\Binn\;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32\oci920_8
* To start WebLogic Server, use a username and   *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console        *
starting weblogic with Java version:
java version "1.6.0_24"
Java(TM) SE Runtime Environment (build 1.6.0_24-b50)
Java HotSpot(TM) Client VM (build 19.1-b02, mixed mode)
Starting WLS with line:
C:\Oracle\MIDDLE~1\JDK160~1\bin\java -client   -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m -Dweblogic.Name=DefaultServer -Djava.security.policy=C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.policy -Djavax.net.ssl.trustStore=C:\Users\ADMINI~1\AppData\Local\Temp\trustStore4013408576188156013.jks -Doracle.jdeveloper.adrs=true -Dweblogic.nodemanager.ServiceEnabled=true -Xverify:none -da -Dplatform.home=C:\Oracle\MIDDLE~1\WLSERV~1.3 -Dwls.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server -Dweblogic.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server -Djps.app.credential.overwrite.allowed=true -Dcommon.components.home=C:\Oracle\MIDDLE~1\ORACLE~1 -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Ddomain.home=C:\Users\ADMINI~1\AppData\Roaming\JDEVEL~1\SYSTEM~1.81\DEFAUL~1 -Djrockit.optfile=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Doracle.server.config.dir=C:\Users\ADMINI~1\AppData\Roaming\JDEVEL~1\SYSTEM~1.81\DEFAUL~1\config\FMWCON~1\servers\DefaultServer -Doracle.domain.config.dir=C:\Users\ADMINI~1\AppData\Roaming\JDEVEL~1\SYSTEM~1.81\DEFAUL~1\config\FMWCON~1 -Digf.arisidbeans.carmlloc=C:\Users\ADMINI~1\AppData\Roaming\JDEVEL~1\SYSTEM~1.81\DEFAUL~1\config\FMWCON~1\carml -Digf.arisidstack.home=C:\Users\ADMINI~1\AppData\Roaming\JDEVEL~1\SYSTEM~1.81\DEFAUL~1\config\FMWCON~1\arisidprovider -Doracle.security.jps.config=C:\Users\ADMINI~1\AppData\Roaming\JDEVEL~1\SYSTEM~1.81\DEFAUL~1\config\fmwconfig\jps-config.xml -Doracle.deployed.app.dir=C:\Users\ADMINI~1\AppData\Roaming\JDEVEL~1\SYSTEM~1.81\DEFAUL~1\servers\DefaultServer\tmp\_WL_user -Doracle.deployed.app.ext=\- -Dweblogic.alternateTypesDirectory=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.ossoiap_11.1.1,C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.oamprovider_11.1.1 -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Dweblogic.jdbc.remoteEnabled=false -Dwsm.repository.path=C:\Users\ADMINI~1\AppData\Roaming\JDEVEL~1\SYSTEM~1.81\DEFAUL~1\oracle\store\gmds   -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=C:\Oracle\MIDDLE~1\patch_wls1035\profiles\default\sysext_manifest_classpath;C:\Oracle\MIDDLE~1\patch_jdev1112\profiles\default\sysext_manifest_classpath weblogic.Server
<Jun 19, 2012 4:43:24 PM IST> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
<Jun 19, 2012 4:43:24 PM IST> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<Jun 19, 2012 4:43:24 PM IST> <Notice> <WebLogicServer> <BEA-000395> <Following extensions directory contents added to the end of the classpath:
C:\Users\Administrator\AppData\Roaming\JDeveloper\system11.1.2.1.38.60.81\DefaultDomain\lib\sqljdbc4.jar>
<Jun 19, 2012 4:43:25 PM IST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Client VM Version 19.1-b02 from Sun Microsystems Inc.>
<Jun 19, 2012 4:43:27 PM IST> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.5.0 Fri Apr 1 20:20:06 PDT 2011 1398638 >
<Jun 19, 2012 4:43:27 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Jun 19, 2012 4:43:27 PM IST> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<Jun 19, 2012 4:43:27 PM IST> <Notice> <LoggingService> <BEA-320400> <The log file C:\Users\Administrator\AppData\Roaming\JDeveloper\system11.1.2.1.38.60.81\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<Jun 19, 2012 4:43:27 PM IST> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Users\Administrator\AppData\Roaming\JDeveloper\system11.1.2.1.38.60.81\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log00019. Log messages will continue to be logged in C:\Users\Administrator\AppData\Roaming\JDeveloper\system11.1.2.1.38.60.81\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log.>
<Jun 19, 2012 4:43:27 PM IST> <Notice> <Log Management> <BEA-170019> <The server log file C:\Users\Administrator\AppData\Roaming\JDeveloper\system11.1.2.1.38.60.81\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log is opened. All server side log events will be written to this file.>
<Jun 19, 2012 4:43:31 PM IST> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<MessageLocalizationHelper> <getLocalizedMessage> The resource for bundle "oracle.jrf.i18n.MBeanMessageBundle" with key "oracle.jrf.JRFServiceMBean.checkIfJRFAppliedOnMutipleTargets" cannot be found.
<Jun 19, 2012 4:43:36 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<Jun 19, 2012 4:43:36 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<CodebasePolicyHandler> <migrateDeploymentPolicies> Migration of codebase policy failed. Reason: oracle.security.jps.JpsException: java.lang.reflect.InvocationTargetException.
<AppPolicyHandler> <migrateAppPolicies> Migration of application policy failed. Reason: oracle.security.jps.JpsException: java.lang.reflect.InvocationTargetException.
<CodebasePolicyHandler> <migrateDeploymentPolicies> Migration of codebase policy failed. Reason: oracle.security.jps.JpsException: java.lang.reflect.InvocationTargetException.
<AppPolicyHandler> <migrateAppPolicies> Migration of application policy failed. Reason: oracle.security.jps.JpsException: java.lang.reflect.InvocationTargetException.
<WSEE:12>com.bea.core.repackaged.springframework.beans.factory.BeanCreationException: Error creating bean with name 'weblogic.wsee.jaxws.client.async.AsyncTransportProvider': Instantiation of bean failed; nested exception is com.bea.core.repackaged.springframework.beans.BeanInstantiationException: Could not instantiate bean class [weblogic.wsee.jaxws.client.async.AsyncTransportProvider]: No default constructor found; nested exception is java.lang.NoSuchMethodException: weblogic.wsee.jaxws.client.async.AsyncTransportProvider.<init>()<WSEEComponentContributor.loadUsingSpring:83>
<Jun 19, 2012 4:44:26 PM IST> <Error> <HTTP> <BEA-101216> <Servlet: "weblogic.wsee.jaxws.client.async.AsyncTransportProvider" failed to preload on startup in Web application: "SugarCRM-ViewController-context-root".
javax.xml.ws.WebServiceException: javax.xml.ws.WebServiceException: java.lang.InstantiationException: weblogic.wsee.jaxws.client.async.AsyncTransportProvider
     at weblogic.wsee.jaxws.WLSInstanceResolver.getSingleton(WLSInstanceResolver.java:36)
     at weblogic.wsee.jaxws.WLSInstanceResolver.start(WLSInstanceResolver.java:55)
     at weblogic.wsee.jaxws.WLSInstanceResolver$WLSInvoker.start(WLSInstanceResolver.java:82)
     at com.sun.xml.ws.server.InvokerTube.setEndpoint(InvokerTube.java:85)
     at weblogic.wsee.jaxws.EndpointAwareLateInitTube.postCreateEndpoint(EndpointAwareLateInitTube.java:48)
     Truncated. see log file for complete stacktrace
Caused By: javax.xml.ws.WebServiceException: java.lang.InstantiationException: weblogic.wsee.jaxws.client.async.AsyncTransportProvider
     at weblogic.wsee.jaxws.WLSServletInstanceResolver.create(WLSServletInstanceResolver.java:37)
     at weblogic.wsee.jaxws.WLSInstanceResolver.getSingleton(WLSInstanceResolver.java:34)
     at weblogic.wsee.jaxws.WLSInstanceResolver.start(WLSInstanceResolver.java:55)
     at weblogic.wsee.jaxws.WLSInstanceResolver$WLSInvoker.start(WLSInstanceResolver.java:82)
     at com.sun.xml.ws.server.InvokerTube.setEndpoint(InvokerTube.java:85)
     Truncated. see log file for complete stacktrace
Caused By: java.lang.InstantiationException: weblogic.wsee.jaxws.client.async.AsyncTransportProvider
     at java.lang.Class.newInstance0(Class.java:340)
     at java.lang.Class.newInstance(Class.java:308)
     at weblogic.wsee.jaxws.injection.WSEEComponentContributor.newInstance(WSEEComponentContributor.java:54)
     at weblogic.wsee.jaxws.injection.WSEEComponentContributor.newInstance(WSEEComponentContributor.java:42)
     at weblogic.wsee.jaxws.WLSServletInstanceResolver.create(WLSServletInstanceResolver.java:35)
     Truncated. see log file for complete stacktrace
>
<Jun 19, 2012 4:44:26 PM IST> <Error> <Deployer> <BEA-149231> <Unable to set the activation state to true for the application 'SugarCRM'.
weblogic.application.ModuleException: [HTTP:101216]Servlet: "weblogic.wsee.jaxws.client.async.AsyncTransportProvider" failed to preload on startup in Web application: "SugarCRM-ViewController-context-root".
javax.xml.ws.WebServiceException: javax.xml.ws.WebServiceException: java.lang.InstantiationException: weblogic.wsee.jaxws.client.async.AsyncTransportProvider
     at weblogic.wsee.jaxws.WLSInstanceResolver.getSingleton(WLSInstanceResolver.java:36)
     at weblogic.wsee.jaxws.WLSInstanceResolver.start(WLSInstanceResolver.java:55)
     at weblogic.wsee.jaxws.WLSInstanceResolver$WLSInvoker.start(WLSInstanceResolver.java:82)
     at com.sun.xml.ws.server.InvokerTube.setEndpoint(InvokerTube.java:85)
     at weblogic.wsee.jaxws.EndpointAwareLateInitTube.postCreateEndpoint(EndpointAwareLateInitTube.java:48)
     at weblogic.wsee.jaxws.JAXWSServlet.registerEndpoint(JAXWSServlet.java:150)
     at weblogic.wsee.jaxws.JAXWSServlet.init(JAXWSServlet.java:64)
     at weblogic.wsee.jaxws.JAXWSDeployedServlet.init(JAXWSDeployedServlet.java:54)
     at javax.servlet.GenericServlet.init(GenericServlet.java:241)
     at weblogic.servlet.internal.StubSecurityHelper$ServletInitAction.run(StubSecurityHelper.java:283)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
     at weblogic.servlet.internal.StubSecurityHelper.createServlet(StubSecurityHelper.java:64)
     at weblogic.servlet.internal.StubLifecycleHelper.createOneInstance(StubLifecycleHelper.java:58)
     at weblogic.servlet.internal.StubLifecycleHelper.<init>(StubLifecycleHelper.java:48)
     at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:539)
     at weblogic.servlet.internal.WebAppServletContext.preloadServlet(WebAppServletContext.java:1985)
     at weblogic.servlet.internal.WebAppServletContext.loadServletsOnStartup(WebAppServletContext.java:1959)
     at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1878)
     at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3153)
     at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1508)
     at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:482)
     at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
     at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
     at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
     at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
     at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
     at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
     at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
     at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:636)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
     at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:205)
     at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:58)
     at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
     at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
     at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
     at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
     at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:51)
     at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
     at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:30)
     at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
     at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)
     at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)
     at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)
     at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
Caused by: javax.xml.ws.WebServiceException: java.lang.InstantiationException: weblogic.wsee.jaxws.client.async.AsyncTransportProvider
     at weblogic.wsee.jaxws.WLSServletInstanceResolver.create(WLSServletInstanceResolver.java:37)
     at weblogic.wsee.jaxws.WLSInstanceResolver.getSingleton(WLSInstanceResolver.java:34)
     ... 49 more
Caused by: java.lang.InstantiationException: weblogic.wsee.jaxws.client.async.AsyncTransportProvider
     at java.lang.Class.newInstance0(Class.java:340)
     at java.lang.Class.newInstance(Class.java:308)
     at weblogic.wsee.jaxws.injection.WSEEComponentContributor.newInstance(WSEEComponentContributor.java:54)
     at weblogic.wsee.jaxws.injection.WSEEComponentContributor.newInstance(WSEEComponentContributor.java:42)
     at weblogic.wsee.jaxws.WLSServletInstanceResolver.create(WLSServletInstanceResolver.java:35)
     ... 50 more
     at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1510)
     at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:482)
     at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
     at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
     Truncated. see log file for complete stacktrace
Caused By: java.lang.InstantiationException: weblogic.wsee.jaxws.client.async.AsyncTransportProvider
     at java.lang.Class.newInstance0(Class.java:340)
     at java.lang.Class.newInstance(Class.java:308)
     at weblogic.wsee.jaxws.injection.WSEEComponentContributor.newInstance(WSEEComponentContributor.java:54)
     at weblogic.wsee.jaxws.injection.WSEEComponentContributor.newInstance(WSEEComponentContributor.java:42)
     at weblogic.wsee.jaxws.WLSServletInstanceResolver.create(WLSServletInstanceResolver.java:35)
     Truncated. see log file for complete stacktrace
>
<Jun 19, 2012 4:44:33 PM IST> <Notice> <LoggingService> <BEA-320400> <The log file C:\Users\Administrator\AppData\Roaming\JDeveloper\system11.1.2.1.38.60.81\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<Jun 19, 2012 4:44:33 PM IST> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Users\Administrator\AppData\Roaming\JDeveloper\system11.1.2.1.38.60.81\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log00019. Log messages will continue to be logged in C:\Users\Administrator\AppData\Roaming\JDeveloper\system11.1.2.1.38.60.81\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log.>
<Jun 19, 2012 4:44:33 PM IST> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
<Jun 19, 2012 4:44:33 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<Jun 19, 2012 4:44:33 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
<Jun 19, 2012 4:44:33 PM IST> <Notice> <Security> <BEA-090171> <Loading the identity certificate and private key stored under the alias DemoIdentity from the jks keystore file C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\DemoIdentity.jks.>
<Jun 19, 2012 4:44:33 PM IST> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\DemoTrust.jks.>
<Jun 19, 2012 4:44:33 PM IST> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file C:\Oracle\MIDDLE~1\JDK160~1\jre\lib\security\cacerts.>
<Jun 19, 2012 4:44:33 PM IST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=Entrust Root Certification Authority - G2,OU=(c) 2009 Entrust\, Inc. - for authorized use only,OU=See www.entrust.net/legal-terms,O=Entrust\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Jun 19, 2012 4:44:33 PM IST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=thawte Primary Root CA - G3,OU=(c) 2008 thawte\, Inc. - For authorized use only,OU=Certification Services Division,O=thawte\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Jun 19, 2012 4:44:33 PM IST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 3,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Jun 19, 2012 4:44:33 PM IST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 2,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Jun 19, 2012 4:44:33 PM IST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GlobalSign,O=GlobalSign,OU=GlobalSign Root CA - R3". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Jun 19, 2012 4:44:33 PM IST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "OU=Security Communication RootCA2,O=SECOM Trust Systems CO.\,LTD.,C=JP". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Jun 19, 2012 4:44:33 PM IST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=VeriSign Universal Root Certification Authority,OU=(c) 2008 VeriSign\, Inc. - For authorized use only,OU=VeriSign Trust Network,O=VeriSign\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Jun 19, 2012 4:44:33 PM IST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=KEYNECTIS ROOT CA,OU=ROOT,O=KEYNECTIS,C=FR". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Jun 19, 2012 4:44:33 PM IST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GeoTrust Primary Certification Authority - G3,OU=(c) 2008 GeoTrust Inc. - For authorized use only,O=GeoTrust Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<Jun 19, 2012 4:44:33 PM IST> <Notice> <Server> <BEA-002613> <Channel "Default[6]" is now listening on 0:0:0:0:0:0:0:1:7101 for protocols iiop, t3, ldap, snmp, http.>
<Jun 19, 2012 4:44:33 PM IST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[5]" is now listening on 127.0.0.1:7102 for protocols iiops, t3s, ldaps, https.>
<Jun 19, 2012 4:44:33 PM IST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[6]" is now listening on 0:0:0:0:0:0:0:1:7102 for protocols iiops, t3s, ldaps, https.>
<Jun 19, 2012 4:44:33 PM IST> <Notice> <Server> <BEA-002613> <Channel "Default[5]" is now listening on 127.0.0.1:7101 for protocols iiop, t3, ldap, snmp, http.>
<Jun 19, 2012 4:44:33 PM IST> <Warning> <Server> <BEA-002611> <Hostname "path-mumbai7", maps to multiple IP addresses: 192.168.1.20, fe80:0:0:0:8ceb:756:d0e1:6176%11, fe80:0:0:0:3401:2477:3f57:feeb%13, 2001:0:5ef5:79fb:3401:2477:3f57:feeb>
<Jun 19, 2012 4:44:33 PM IST> <Notice> <Server> <BEA-002613> <Channel "Default[2]" is now listening on fe80:0:0:0:3401:2477:3f57:feeb:7101 for protocols iiop, t3, ldap, snmp, http.>
<Jun 19, 2012 4:44:33 PM IST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[1]" is now listening on 192.168.1.20:7102 for protocols iiops, t3s, ldaps, https.>
<Jun 19, 2012 4:44:33 PM IST> <Notice> <Server> <BEA-002613> <Channel "Default[3]" is now listening on fe80:0:0:0:0:5efe:c0a8:114:7101 for protocols iiop, t3, ldap, snmp, http.>
<Jun 19, 2012 4:44:33 PM IST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[2]" is now listening on fe80:0:0:0:3401:2477:3f57:feeb:7102 for protocols iiops, t3s, ldaps, https.>
<Jun 19, 2012 4:44:33 PM IST> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on 192.168.1.20:7101 for protocols iiop, t3, ldap, snmp, http.>
<Jun 19, 2012 4:44:33 PM IST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[4]" is now listening on fe80:0:0:0:8ceb:756:d0e1:6176:7102 for protocols iiops, t3s, ldaps, https.>
<Jun 19, 2012 4:44:33 PM IST> <Notice> <Server> <BEA-002613> <Channel "Default[4]" is now listening on fe80:0:0:0:8ceb:756:d0e1:6176:7101 for protocols iiop, t3, ldap, snmp, http.>
<Jun 19, 2012 4:44:33 PM IST> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 2001:0:5ef5:79fb:3401:2477:3f57:feeb:7101 for protocols iiop, t3, ldap, snmp, http.>
<Jun 19, 2012 4:44:33 PM IST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure" is now listening on 2001:0:5ef5:79fb:3401:2477:3f57:feeb:7102 for protocols iiops, t3s, ldaps, https.>
<Jun 19, 2012 4:44:33 PM IST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[3]" is now listening on fe80:0:0:0:0:5efe:c0a8:114:7102 for protocols iiops, t3s, ldaps, https.>
<Jun 19, 2012 4:44:33 PM IST> <Notice> <WebLogicServer> <BEA-000331> <Started WebLogic Admin Server "DefaultServer" for domain "DefaultDomain" running in Development Mode>
<Jun 19, 2012 4:44:34 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<Jun 19, 2012 4:44:34 PM IST> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
IntegratedWebLogicServer startup time: 98161 ms.
IntegratedWebLogicServer started.
[Running application SugarCRM on Server Instance IntegratedWebLogicServer...]
[04:44:34 PM] **** Warning: Application SugarCRM may have been left deployed on the server. Undeploy it from the admin console.
[04:44:34 PM] Web Module ViewControllerWebApp.war recognized in project ViewController.jpr
[04:44:34 PM] ---- Deployment started. ----
[04:44:34 PM] Target platform is (Weblogic 10.3).
[04:44:35 PM] Retrieving existing application information
[04:44:35 PM] Running dependency analysis...
[04:44:35 PM] Deploying 2 profiles...
[04:44:35 PM] Wrote Web Application Module to C:\Users\Administrator\AppData\Roaming\JDeveloper\system11.1.2.1.38.60.81\o.j2ee\drs\SugarCRM\ViewControllerWebApp.war
[04:44:36 PM] Wrote Enterprise Application Module to C:\Users\Administrator\AppData\Roaming\JDeveloper\system11.1.2.1.38.60.81\o.j2ee\drs\SugarCRM
[04:44:36 PM] Redeploying Application...
<CodebasePolicyHandler> <migrateDeploymentPolicies> Migration of codebase policy failed. Reason: oracle.security.jps.JpsException: java.lang.reflect.InvocationTargetException.
<AppPolicyHandler> <migrateAppPolicies> Migration of application policy failed. Reason: oracle.security.jps.JpsException: java.lang.reflect.InvocationTargetException.
<Jun 19, 2012 4:44:37 PM IST> <Error> <Deployer> <BEA-149265> <Failure occurred in the execution of deployment request with ID '1340104476670' for task '0'. Error is: 'weblogic.application.ModuleException: Context path '/SugarCRM-ViewController-context-root' is already in use by the module: SugarCRM-ViewController-context-root application: SugarCRM_Project1_SugarCRM'
weblogic.application.ModuleException: Context path '/SugarCRM-ViewController-context-root' is already in use by the module: SugarCRM-ViewController-context-root application: SugarCRM_Project1_SugarCRM
     at weblogic.servlet.internal.WebAppModule.initAndValidateContextPath(WebAppModule.java:1210)
     at weblogic.servlet.internal.WebAppModule.registerWebApp(WebAppModule.java:970)
     at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:382)
     at weblogic.servlet.internal.WebAppModule.activate(WebAppModule.java:433)
     at weblogic.application.internal.flow.ModuleStateDriver$2.next(ModuleStateDriver.java:375)
     Truncated. see log file for complete stacktrace
>
<Jun 19, 2012 4:44:37 PM IST> <Error> <Deployer> <BEA-149202> <Encountered an exception while attempting to commit the 1 task for the application 'SugarCRM'.>
<Jun 19, 2012 4:44:37 PM IST> <Warning> <Deployer> <BEA-149004> <Failures were detected while initiating deploy task for application 'SugarCRM'.>
<Jun 19, 2012 4:44:37 PM IST> <Warning> <Deployer> <BEA-149078> <Stack trace for message 149004
weblogic.application.ModuleException: Context path '/SugarCRM-ViewController-context-root' is already in use by the module: SugarCRM-ViewController-context-root application: SugarCRM_Project1_SugarCRM
     at weblogic.servlet.internal.WebAppModule.initAndValidateContextPath(WebAppModule.java:1210)
     at weblogic.servlet.internal.WebAppModule.registerWebApp(WebAppModule.java:970)
     at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:382)
     at weblogic.servlet.internal.WebAppModule.activate(WebAppModule.java:433)
     at weblogic.application.internal.flow.ModuleStateDriver$2.next(ModuleStateDriver.java:375)
     Truncated. see log file for complete stacktrace
>
[04:44:37 PM] Deployment cancelled.
[04:44:37 PM] ---- Deployment incomplete ----.
[04:44:37 PM] Remote deployment failed (oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer)
#### Cannot run application SugarCRM due to error deploying to IntegratedWebLogicServer.
[Application SugarCRM stopped and undeployed from Server Instance IntegratedWebLogicServer]

Context path '/SugarCRM-ViewController-context-root' is already in use by the module: SugarCRM-ViewController-context-root application: SugarCRM_Project1_SugarCRMLooks like the application (or another application which uses same context root) is already deployed to the server and could not be undeployed.
Can you invoke the WLS console, navigate the deployment and undeploy it, then try deploying from JDev and see if it works fine?
-Arun

FRM-41214: Unable ro run report while calling a report from a form in 9iDS

Am in the process of migrating from Developer 6i client/server to Developer 9iDS on Windows 2000.
I have read through the various postings on this issue & have made changes accordingly. I also referred to the white paper on the Forms/Reports integration.
As I am trying to do a prototype, am compiling my forms/reports on my local machine & not on the apps. server.
I installed a report server on my local machine as,
rwserver -install 9irep
I have defined this as a NT service and it is up & running & so is my OC4J instance.
I have defined a reports object in my Form Builder & set Report Server=9irep,
Destype=Cache,
Execution mode=runtime
Communication_mode=synchronous.
I also removed the /security tag from the <report server>.conf file as suggested in the white paper. Also set the single sign-on to NO for the reports service.
I have replaced my run_product with the run_report_object built-in as follows.
Declare
report_id REPORT_OBJECT;
report_status VARCHAR2(255);
rep_job_id VARCHAR2(255);
Begin
report_id := FIND_REPORT_OBJECT('KS'); --Created in form under node "Reports"
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_FILENAME,'C:\Kalpana\9i_Prototype\ISSMDLCUST.rdf');
rep_job_id := RUN_REPORT_OBJECT(report_id);
report_status := REPORT_OBJECT_STATUS(rep_job_id);
WHILE report_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
LOOP
report_status := REPORT_OBJECT_STATUS(rep_job_id);
END LOOP;
message(report_status); pause;
IF report_status='FINISHED' THEN
Web.Show_Document('http://houwdisndgd01:8888/reports/server/getjobid='
||rep_job_id||'?server=ks');
END IF;
End;
I get an error message "FRM 41214: Unable to run report" right after the call to run_report_object.
Can someone please tell me where am going wrong with my run_report_object built-in? (I also need help writing my web.show document to point it to my local machine/folders).
Thanks
Kalpana

How I have implemented the same and works
Local OC4J is running.
I established a reports server "repserver90" as a service.
I created a report named "C:\TMP\TMP\test_report.rdf"
I created a form with a Reports object with properties:
Name: "EMP"
Filename: "C:\TMP\TMP\test_report.rdf"
Execution mode "Batch"
Communication mode "Sychronous"
Report Destination Type "Cache"
Report Destination Format "HTML"
Report Server "repserver90"
I call the report with the procedure:
PROCEDURE TEST_REPORT IS
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status VARCHAR2(20);
BEGIN
repid := find_report_object('EMP');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_EXECUTION_MODE,BATCH);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,CACHE);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'html');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_SERVER,'repserver90');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_OTHER,'paramform=no pdeptno='||:dept.deptno);
v_rep := RUN_REPORT_OBJECT(repid);
rep_status := REPORT_OBJECT_STATUS(v_rep);
WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
LOOP
rep_status := report_object_status(v_rep);
END LOOP;
IF rep_status = 'FINISHED' THEN
/*Display report in the browser*/
WEB.SHOW_DOCUMENT('http://localhost:8888/reports/rwservlet/getjobid'||substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server=repserver90','_blank');
ELSE
message('Error when running report');
END IF;
END;
Minas

Ask the Expert: Upgrading Cisco Unified Communications Manager (CUCM) to Version 9.1 (Drive to 9)

Welcome to the Cisco Support Community Ask the Expert conversation. Learn from experts Vijay Rao and Amit Singh about simplified upgrade process and focused support from Cisco to migrate to version 9.1.
This is a continuation of the live Webcast
Drive to 9 is a comprehensive and holistic program designed to help you upgrade the current Cisco® Unified Communications Manager installed base to version 9.1 or higher. This upgrade will enable customers to have next-generation collaboration experiences.
During the live event, Cisco subject matter experts Vijay Rao and Amit Singh focussed on the simplified upgrade process and focused support from Cisco to migrate to version 9.1. They also talked about the changes made to the licensing model of User Connect Licensing and Cisco Unified Workspace Licensing.
Vijay Rao is a Network Consulting Engineer and is currently a unified communications (UC) consultant for Bank of America. He has been providing consulting assistance to the bank for the past 6 years. He helps design complex UC networks for large enterprise customers. He was previously part of Cisco IT in the Asia Pacific, Japan, and China (APJC) region and was instrumental in designing and implementing the Bangalore campus. He has been working with Cisco for 9 years and has 12 years of UC experience. He has a Cisco CCVP® certification.
Amit Singh is a customer support engineer at the Cisco Technical Assistance Center in Bangalore, India. He has 7 years of experience in his areas of expertise: wireless, Cisco Unified Communications Manager, multiservices, Cisco Unity®, and Cisco Unified Contact Center Express. He has been involved in various escalation requests from India, Singapore, and Australia and is currently working as a technical lead for the Voice team in Bangalore, India. He is a computer science graduate.
Remember to use the rating system to let Vijay and Amit know if you have received an adequate response.
Vijay and Amit might not be able to answer each question due to the volume expected during this event. Remember that you can continue the conversation on the Collaboration, Voice and Video sub-community forum shortly after the event. This event lasts through July 19, 2013. Visit this forum often to view responses to your questions and the questions of other community members.
Webcast related links:
Webcast Video
FAQ from the live webcast
Slides from the live webcast

Hello Robert,
Apologies for a delayed response, some days get very hectic.
In CallManager, we only define the SRST reference, and CUCM version and SRST version are independent of each other.
The only thing, which is related and will change with CUCM upgrade is Phone F/w version.
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/compat/ccmcompmatr1.pdf
You may just want to check your, phone f/w compatibility with the SRST version running on your ISR G1 Gateways:
http://www.cisco.com/en/US/products/sw/voicesw/ps2169/products_device_support_tables_list.html
For Example: SRST version 7.1
http://www.cisco.com/en/US/prod/collateral/voicesw/ps6788/vcallcon/ps2169/data_sheet_c78-520521.html
You may want to do some lab testing with CUCM 9.1 and an SRST supported f/w on your phones.
If you decide to run the old Phone/F/w to support the SRST version, you may not be able to take advantage of new features.
Also, you can try and upgrade your phones(Wih CUCM 9.1) and test them with your SRST version.
It should work fine, but from a troubleshooting perspective, TAC may request you to come into a Cisco Supported combination.
Please, let me know if this clarifies your doubt or we can have a quick phone call.
Regards
Amit Singh

Ask the Cisco VIP: Troubleshooting SIP in Cisco Unified communications

Troubleshooting SIP in Cisco Unified communications deployments with Cisco VIP Ayodeji Okanlawon
This is a Q&A Ask the Expert Session continuation from the Live Webcast
Ask your questions on Session Initiation Protocol (SIP) and how it is redefining our UC world.The Session Initiation Protocol (SIP) is a signaling communications protocol, widely used for controlling multimedia communication sessions such as voice and video calls over Internet Protocol (IP) networks.
Featured Expert
Ayodeji Okanlawon, a Cisco Designated VIP, is the Lead Consultant Engineer for Global Solutions Design and Engineering at Verizon Business. In his past, he has worked at Intact IS, NCS Global, and Schlumberger Information Solutions. His experience includes development of design and deployment of large scale IP telephony projects on Cisco Call Manager platforms, Cisco Voice gateways, Cisco Jabber cloud and on premise solution. His expertise includes SIP solutions, CUBE design and Deployment, Troubleshooting: Voice gateways, CUCM, Unity connection, CUPS. Deji has been awarded the Cisco Designated VIP in 2013 and 2014. Deji holds a Bachelor of Science (BS), Electrical and Electronics Engineering, Second Class Upper from Obafemi Awolowo University.
According to Deji, “If you want to advance your career, if you’re serious about your skill sets, you’ve got to be in the forums.” (Read the Interview >>)
We look forward to your participation. This event is open to all, including partners.
* * Remember to use the rating system to let Deji know if you have received an adequate response. * *
Deji might not be able to answer each question due to the high volume expected during this event. This event runs January 13 through January 23, 2015. Visit this forum often to view responses to your questions and the questions of other community members.

Derrick,
RFC 3261defines ways to provide increased security for a SIP session.
The following describes areas in SIP that provides security for the protocol
1. Authenticating users.
We need to authenticate a user to ensure that the sender of the message is who he claims to be.
To achieve this SIP uses digest authentication between a UAC, proxy and a UAS. This provides the most basic level of authentication challenge between a client, proxy and a server.
2. Secure SIP signalling
The next area we can secure is SIP signalling itself. For this we use SSL/TLS. This is similar to using https in web browsers. With TLS before our any signalling is exchange X.509 certificates are used create a secure TLS channel. All our SIP messages are then transported within the secure channel.
NB: The digest authentication mentioned above for authenticating a user agent is just authentication. The messages are not protected from reading or modification hence it is recommended that these messages are carried inside a secure TLS channel for better security.
3. Privacy and Identification
Additional security features in SIP provides means where any user can choose to either reveal or conceal his identity.
4.Secure RTP
SIP also provides the ability to secure the media channel. It is not enough to secure signalling while anyone can listen to the media. RFC3830 discusses how the encryption should be done.
5. S/MIME
S/MIME encapsulation is used to protect sip headers making it impossible for any one in between the sender and receiver to modify the sip headers
Regards

Unable to access cisco asa via https or asdm!! connection interrupted message appears on the browser

Hey guys,
I am unable to access cisco asa device using https and cannot lunch asdm, after recent power failure at our location. I have asdm installed on my machine and whenever i try to access the asdm, receive Error: unable to lunch device manager from X.X.X.X The following is log from java console
Trying for ASDM version file; url = https://x.x.x.x/admin/
javax.net.ssl.SSLHandshakeException: Remote host closed connection during handshake
When i try to access it from the browser it show error message
"The connection was interrupted"
I am running CISCO ASA 8.3 (1)
with asdm image as asdm 7.1.3
JAVA version installed Java 7 update 71
I have added the https:> to exception site list and set security level to medium,
even ssh access is not working !!
I would appreciate if anyone can help me out!!
Thanks
Fareed

Hey lcaruso,
thanks for information!!
i was able to connection through console as suggested and regenerated the rsa key .. was able to connection through ssh, but the issue with the asdm or web access was not resolved.
I have tried few of the steps as suggested on
https://supportforums.cisco.com/document/49741/asa-pixfwsm-unable-manage-unit-sshtelnetasdm#collect_captures
capture output
ZHHFP-FIREWALL1(config)# sh cap capin
139 packets captured
1: 18:50:17.654720 802.1Q vlan#1 P0 192.168.160.113.58084 > 192.168.160.126.8
443: S 2567327150:2567327150(0) win 8192 <mss 1260,nop,wscale 8,nop,nop,sackOK>
2: 18:50:17.654812 802.1Q vlan#1 P0 192.168.160.126.8443 > 192.168.160.113.58
084: S 590825877:590825877(0) ack 2567327151 win 8192 <mss 1380>
3: 18:50:17.655621 802.1Q vlan#1 P0 192.168.160.113.58084 > 192.168.160.126.8
443: . ack 590825878 win 65520
4: 18:50:17.656078 802.1Q vlan#1 P0 192.168.160.113.58084 > 192.168.160.126.8
443: P 2567327151:2567327332(181) ack 590825878 win 65520
5: 18:50:17.656139 802.1Q vlan#1 P0 192.168.160.126.8443 > 192.168.160.113.58
084: . ack 2567327332 win 8192
6: 18:50:17.656475 802.1Q vlan#1 P0 192.168.160.126.8443 > 192.168.160.113.58
084: FP 590825878:590825878(0) ack 2567327332 win 8192
7: 18:50:17.657696 802.1Q vlan#1 P0 192.168.160.113.58084 > 192.168.160.126.8
443: . ack 590825879 win 65520
8: 18:50:17.657802 802.1Q vlan#1 P0 192.168.160.113.58084 > 192.168.160.126.8
443: F 2567327332:2567327332(0) ack 590825879 win 65520
9: 18:50:17.657848 802.1Q vlan#1 P0 192.168.160.126.8443 > 192.168.160.113.58
084: . ack 2567327333 win 8192
10: 18:50:17.658108 802.1Q vlan#1 P0 192.168.160.113.58085 > 192.168.160.126.8
443: S 1351758892:1351758892(0) win 8192 <mss 1260,nop,wscale 8,nop,nop,sackOK>
also i have downgraded the java to 1.6_45 but still not luck.
error message i received on java console
Trying for IDM. url=https://x.x.x.x/idm/idm.jnlp/
javax.net.ssl.SSLHandshakeException: Remote host closed connection during handshake
at sun.security.ssl.SSLSocketImpl.readRecord(Unknown Source)
at sun.security.ssl.SSLSocketImpl.performInitialHandshake(Unknown Source)
at sun.security.ssl.SSLSocketImpl.startHandshake(Unknown Source)
at sun.security.ssl.SSLSocketImpl.startHandshake(Unknown Source)
at sun.net.www.protocol.https.HttpsClient.afterConnect(Unknown Source)
at sun.net.www.protocol.https.AbstractDelegateHttpsURLConnection.connect(Unknown Source)
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
at sun.net.www.protocol.https.HttpsURLConnectionImpl.getInputStream(Unknown Source)
at com.cisco.launcher.w.a(Unknown Source)
at com.cisco.launcher.s.for(Unknown Source)
at com.cisco.launcher.s.new(Unknown Source)
at com.cisco.launcher.s.access$000(Unknown Source)
at com.cisco.launcher.s$2.a(Unknown Source)
at com.cisco.launcher.g$2.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Caused by: java.io.EOFException: SSL peer shut down incorrectly
at sun.security.ssl.InputRecord.read(Unknown Source)
... 15 more
Any help would be highly appreciated!!
Thanks
Fareed

LMS 3.1 - Unable to run EOL/EOS reports from CCO or Locally

Unable to run the EOL/EOS reports in RME 4.2.0 LMS 3.1 (Windows)
Jobs fail with message saying connection problems with CCO. (Proxy and CCO settings are correctly filled out)
Tried to run the reports using the local data source option but am unable to download data files from CCO as the links given in online help (and a different link on CCO documentation) do not work.
This is the documentation from online help:
1. Use a server other than LMS server with internet connection as the external server.
2. From this external server, access the following link to download the text file with XML data:
http://www.cisco.com/cgi-bin/front.x/eox/RME_PSIRT_DETAILS.pl?action=download
Ensure that you are a Registered User to access the above link. If you are not a Registered User, you can use the same link to register.
3. After downloading the text file with XML data to the external server, copy this file from the external server into the LMS server under:
NMSROOT\files\rme\jobs\inventory\reports\EOX_PSIRT\local_xml
The text file with XML data, PSIRT_EOX_OFFLINE.txt gets saved under local_xml folder.
The link mentioned in the instructions does not lead to any PSIR or EOX data.

See this thread:
http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Network%20Infrastructure&topic=Network%20Management&topicID=.ee71a02&fromOutline=&CommCmd=MB%3Fcmd%3Ddisplay_location%26location%3D.2cd4dd24

Prime Infrastructure 2.2- problems: Wired Detailed Device Inventory report not running / Cisco 5500 WLCs no listed in subgroup

New installation of Prime Infrastructure 2.2.0 (PI-VA-2.2.0.0.158.ova)
installed fixes/software/device packs:
PI 2.2.1 Poodle Fix (installed)
PI 2.2.1 Maintenance Release (installed,ncs stopped,rebooted)
Prime Infrastrucutre 2.2 Device Pack 3 (installed,ncs stopped,rebooted)
Licences installed (ncs stopped,rebooted)
Added all devices via Bulk Import (Inventory>Device Management>Network Devices)
Problem 1:
The Cisco 5500 WLCs are not listed in Inventory>Device Management>Network Devices (see screen shot) but listed under "All Devices"!
The Cisco 4400 WLCs and the 8500 WLCs are listed within their subgroup.
Devices are in "Managed State"
Problem 2: fixed! (Browser issue)
Problem 3:
Unable to run "Wired Detailed Device Inventory" report because I get the error message: Failed to run report: Unable to retrieve data for: Chassis Information (if Chassis Information is selected, if System Information is selected I get the error message with ...retrieve data for:System Information)
All devices do have an "Admin Status = Managed" and the Last Inventory Collections Status = Completed.
Has anyone the same issues or a tip for me?
Another topic, the "User Defined Fileds" are not exported when with running a "Device Export" (Inventory > Device Management > Network Devices). ;-(
BR
Bastian

Hallo Bastian,
I think you still have browser issue, Using IE is still the best with Prime.
I have exactly same prime 2.2 and installed fixes/software/device packs.
I have no problem I can see all views. I use now IE 11, with Chrome 42.0.2311.90 and firefox 37.01 I have problems too with lots of views. You have not tell what browser + version you have.
Since you have same prime 2.2 as me. I have other problems, can you check yours?
Can you see a functional CLI template page at Configuration > Templates > Features & Technologies:
https://supportforums.cisco.com/discussion/12481691/can-cisco-prime-22-still-do-simple-ad-hoc-deployment-job-cli-over-all-switches
Do you have SNMP Connectivity Failed while Verify Credentials has no errors all green and checked.
https://supportforums.cisco.com/discussion/12494786/snmp-request-exceeds-internal-data-buffer-512-bytes-prime-22-asa-5545

Unable to run payroll for two employees who rejoined the company.

Dear Community,
We are unable to run payroll for two employees who have rejoined the company.
Any guidance would be appreciated.
Thanks in advance.

Hi,
Can you check payroll status of the mentioned employees in PA30. (IT0003)
See whether employee number has been locked for payroll or there are dates in the fields for retroactive calculation etc.
Regards;
Okan

Unable to run reports from forms using run_report_object

Hi All,
I am unable to run a report(9i) from forms(9i) in client side.
I used the following code
Declare
     repid REPORT_OBJECT;
     v_rep varchar2(100);
     rep_status varchar2(20);
Begin
     repid := FIND_REPORT_OBJECT('report4');
     v_rep := RUN_REPORT_OBJECT(repid);
End;
I get the following error
FRM-41219 : Cannot find report:invalid ID.
Any help will be highly appreciated.
Thanks,
Sanjay

Hi All,
I am unable to run a report(9i) from forms(9i) in client side.
I used the following code
Declare
     repid REPORT_OBJECT;
     v_rep varchar2(100);
     rep_status varchar2(20);
Begin
     repid := FIND_REPORT_OBJECT('report4');
     v_rep := RUN_REPORT_OBJECT(repid);
End;
I get the following error
FRM-41219 : Cannot find report:invalid ID.
Any help will be highly appreciated.
Thanks,
Sanjay Hi
You have to create a report object within the form.
If you look at the Object NAvigator in the Form Builder right below Record Group
tou would see an option for Report. Create a new report object.
Set the following properties for that object
Filename - This should be the name of your RDF file you created from Report Builder along with the full path.
Set the Execution Mode, Communication Mode and Report Destination Type as per your requirements.
In the parameter for find_report_object() pass the name of the report object you created.
eg.
if the name of the report object you created is Report2 then
your call should be rep_id := find_report_object('Report2') .
You are calling the report object which has been created in your form builder and through that call you are running the report file specified in the Filename property of that report object.
Regards
Poorvi

Unable to run Photoshop, tells me I've reached the 2 Comp limit

I have installed on two computers Adobe Photshop, now on one of them I am unable to run Photoshop and get a message telling me that I've reached the limit of two computers and it doesn't run any more and asks for an activation code.
The thing is that it's only installed on these two computers and not on any other, could my account have been hacked and installed by someone else? Is there a way of "removing " activation on a computer remotely or atleast identify on which computers it's installed?
Thanks,

Hi ubali,
Welcome to the Community!
Kindly contact our Adobe support and they will help you with the activation, check the contact information here: http://www.adobe.com/support/download-install/supportinfo/
-Ankit

Microsoft Vision unable to run

Microsoft Visio standard upon installing, starts but soon after the following is posted " Vision stop working"
Have contacted tech support in Malaysia via toll free number 800 188 6009. They did trouble shooting - the following carried out;-
a) Run uninstall followed by clicking change. On completion the same problem encountered.
Assistance required

Hi,
Could you tell us is there any other error code or message about Visio crash?
1. First let’s try to launch Visio in safe mode by typing Visio.exe /safe in command line.
2. We can perform a clean boot in Windows to remove conflict with other applications.
About how to perform a clean boot: http://support2.microsoft.com/kb/929135/en-us
3. The cause may be the installation resource is corrupted. You can also download the installation from website and reinstall.
For more information about unable to start Office:
https://social.technet.microsoft.com/Forums/en-US/ac9f4578-f0bf-471c-94ee-bce2e9ce7b3e/microsoft-vision-unable-to-run?forum=visiogeneral
If this issue persists, please collect the event viewer logs and upload it to OneDrive. I’ll analyze this issue in detail as soon as getting it.
More information about event logs:
http://windows.microsoft.com/en-us/windows/what-information-event-logs-event-viewer#1TC=windows-7
Best regards,
Greta Ge
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Cisco Unified Communications Manager Attendant Console issue with cucm ver 9.1.1

Dear support,
As we used before Cisco Unified Communications Manager Attendant Console with CUCM version 7.x as now we upgrade to version 9.1.1 and we could not be able to use this service .due to attendant console is not available with cucm versio 9.1.1.
before upgrade cucm ver 7.x from PC user maintain all contact details store with Attendant console software on his desktop PC. right now its give error unable to connect to the server. due to attendant console is not available with cucm version 9.1.1.
So how i can retrieve the user store contact details from attendant console software from his PC desktop .
so please provide you feedback highly appreciate.
Regards
syed

Dear support,
As i check this on user pc c:\program files\cisco\Unified Communications Manager Attendant Console\data\GlobalSettings.xml
I couldn't be able to retrieve the store contact data .most of the user are get effected by this service.
As we do upgrade to cucm versioun 9.1.1 to use of more services but not user are to be get effect by the attendant services like we can't use Attendant console software on CUCM 9.1.1 after upgrade......
so please advice ........... atleast we need to retrieve the user store contact data ...
Highly appreciate for your resposne .....
regards
syed

Cisco Unified Communications Manager AXL servers option appear deactivated in cisco unity connection

I have a problem, the tab with the Cisco Unified Communications Manager AXL servers option is disabled or appear disabled in CUC. any idea what might be going on, I checked that the service relates to AXL is on and running in CUCM and CUC. My version is CUCM and CUC BE 7.1

This is disabled on BE 5000 servers because CUCM and CXN are coresident on the same OS. AXL integration is pre-built and required. This is only enabled for an administrator to configure/edit on standalone CXN installs.
Please remember to rate helpful responses and identify helpful or correct answers.

Unable to run Cisco IP Communicator

Similar Messages

Maybe you are looking for