Unable to run form 10g in IE too

Hi,
Continued from
Frm-10142: The HTTP Listener is not running on
I got the problem in IE too.
Many Thanks & Best Regards,
HuaMin

Hi
. Even if I get the patch from Oracle, next time when I will be with other issues in Win 7 for Form 10g, they will still tell me that Form 10g is not certified with Win 7. Am I right?Not at all...
as previously mentioned ; If you have access to My Oracle Support, take a look at this document: How to Install Developer Suite 10.1.2.3 on Windows Vista (Doc ID 559067.1) it is the same handling issue as Windows 7
Pls check the following table for compatibility issues
http://www.oracle.com/technetwork/middleware/ias/downloads/as-certification-r2-101202-095871.html#BABGCBHA
Footnote 5 ; Need minimum 10.1.2.3 patch level for IE 8.0 and Firefox3.5. Oracle Application
Pls folloe the steps mentioned it should be here
Regards,
Amatu Allah
Edited by: Amatu Allah on May 22, 2012 2:49 AM

Similar Messages

To run Forms 10g on Windows Mode

Is there possibility to run Forms 10g on Windows mode, not on Web ?
Thanks.

If you want to test your forms locally there is an OC4J component with the Developer Suite which can be started so you can run your Forms on your local station. This is no client/server but you run your webforms local.

Explorer has Hanging while Trying to Run Forms 10g

Hi,
While Trying to Run Forms 10g on Windows vista (o.s) "Explorer has Hanging " ...
Operating system : Windows vista
Forms - 10g
Plz Any one help...
Thanks....
Sa....

Is it the problem with Vista only or in other versions of windows tooo. If the same problem occours in other IE versions then check if you have installed jinitiator.Most probably it is in case the jinitiator not installed...

Unable to run forms in oracle forms developer 10g

I am using oracle forms developer 10g on oracle application Release 12.
When i run form i am getting error that weblistener is not running on default port 8888. Then i changed it to 8000. But still i am not able to run the forms.

Nivas,
In addition to running OC4J, you must also have your browser configured to use a Java Runtime Environment. The easiest - and preferred - method is to install the Oracle JInitiator as there is not configuration needed other than the installation. You can also use Sun's JRE, but you would have to research how to configure your PC correctly. The other option is to change your FormsWeb.cfg file to use the Browser Native JRE. Edit the formsweb.cfg file and find the IE= directive. The Default is IE=jinitiator. Change this to IE=Native, save your changes and you are done. This is not the preferred solution, but it does work.
Craig...

Unable to run form in explorer

i am trying to run form10g,,it connects with internet explorer but after this it contiously give message like "page can not be displayed",so wat could be the reason for this,,plz help

hi,
me to getting error when running form from IE8 brouser
when putting the address
http://192.100.4.38:7778/forms/frmservlet?config=default
it is redirecting to
res://ieframe.dll/acr_error.htm#,http://192.100.4.38:7778/forms/frmservlet?config=default
and following message is comming in page.
We were unable to return you to the page you were viewing.
Internet Explorer has stopped trying to restore this website. It appears that the website continues to have a problem.
What you can do:
Go to your home page
Try to return to the page you were viewing
More information
i try to check you solution which is given in your post to but i did't find
find *“*Enable memory protection to help mitigate online attacks**”. in security section and the folloing line too.
5. Uncheck “Enable memory protection to help mitigate online attacks”.
Could you suggest me what to do please.

Unable to Run Form more than once!

Hi,
1. I create an oracle 10g Form
2. I am trying to "Run Form" from within the Forms Builder. It runs OK.
3. I close the IE, and try to "Run Form" again. It fails!
My problem is that my form runs only the first time!!!
However, If i try to run it manually by opening the IE and type: http://EH011W04G.greece.clb:8889/forms90/f90servlet?form=c:\myform.fmx&userid=lala/xaxa@orcl, it runs ok!
I discovered that the problem is this:
The first time i "Run Form" through Forms Builder, a file lets's say giorgos.htm is created in my Temp directory, and this file loads the form OK. The second time i "Run Form" through Forms Builder, a file giorgos.1htm is created and cannot load because it is not an html file!! If i rename it to giorgos1.htm it works ok!!!
so... anybody can help me?
thx for your time!

Hello there, One Solution that i think is due to not closing the form application properly.If you happen to close the IE directly through the close button without exiting the FORM (with the Action => exit or through Exit_form ) then your forms instance keeps on running on the server and it only closed when timed out .That's why you are not able to run it again . but when you type the url itself it get loaded because it load the already running instance of the form so i'll suggest try to close it from Action=>exit and run again.
Hope it will help you.

Run form 10g

I use forms 10g R2. When I run a form, it does not show the full size in the browser. Whats the problem? is their any tips?

I used http://localhost:8889/forms/frmservlet?form=myform.fmx&separateframe=true , where I used my form name instead of myform. However, it shows error age 'FRM-40010: can not read form..'.
When I open form builder and run from there, it does not show any form name in the URL. It just shows as follows:
http://localhost:8889/forms/frmservlet
MOreover, it does not show in full screen.
But when I add my form name, it shows the error.

Error running forms 10g on OC4J

Hi everyone,
I installed Oracle DB 10g and Developer Suite 10g (did not install Ap. Server) at the same machine (different homes), everything seemed to be OK, I use sqlplus with no problems, then I did this:
1) Created a table with just one field
2) Created a test form with Forms 10g using wizard with just that table and that field (I connect to oracle with no problems on forms builder)
3) Started OC4J Instance (but i have to leave the command prompt opened to run well)
4) When I run the form, it opens Internet explorer then shows Oracle application server forms service, but with this message ORA-12560 TNS: Protocol Adapter error, I click OK and ask me for a user and password, but the same error!!
IS there any configuration that I have to do on OC4J?? Why I can connect to oracle from sqlplus, enterprise manager and so, but it fails running forms, specifically when open OC4J???
Thanks in advance

Is it .../forms/registry.dat or .../forms/registry/Registry.dat?
Let's go back to this post. I asked you to try a URL to your form in a browser window, not Forms Builder. The 2nd part of your answer, you said...
But if the OC4J instance is NOT running I have
message says FRM-92120: Registry file
http://walaa:8889/forms/java/oracle/forms/registry.dat
is missing."If your OC4J is not running and you try a URL from a browser, you should be getting a "Cannot find server or DNS Error", not an Oracle error. The only way I could reproduce your error above was to run from Forms Builder with OC4J started and having manually renamed my Registry.dat.
If you didn't edit your Registry.dat (and possible hose it), then someting just went wrong during the install. You could check you installation log. Mine is at C:\Program Files\Oracle\Inventory\logs\installActions2006-03-11_03-50-02PM.log and has a single line containing "Registry.dat" showing the target location.
Is this Forms10g R2 on Windows? You could uninstall ODS and reinstall in probably 30 mins to an hour. Maybe you want to consider that.

Error running forms 10g with OC4J

Hi everyone,
I installed Oracle DB 10g and Developer Suite 10g (did not install Ap. Server) at the same machine (different homes), everything seemed to be OK, I use sqlplus with no problems, then I did this:
1) Created a table with just one field
2) Created a test form with Forms 10g using wizard with just that table and that field (I connect to oracle with no problems on forms builder)
3) Started OC4J Instance
4) When I run the form, it opens Internet explorer then shows Oracle application server forms service, but with this message ORA-12560 TNS: Protocol Adapter error, I click OK and ask me for a user and password, but the same error!!
IS there any configuration that I have to do on OC4J?? Why I can connect to oracle from sqlplus, enterprise manager and so, but it fails running forms, specifically when open OC4J???
Thanks in advance

Did you save the form before running it, in the context of the builder? there is a known bug in this area.
Patrick.

Running forms 10g on PC with Forms 6i

I am currently running Oracle Developer Suite 6i (6.0.8.23.2) 32 bit etc. on Windows XP on my PC.
I now want to load Forms 10g etc. on the same PC. Is this possible? Are there going to be any conflicts with two dirfferent versions on one PC?
Edited by: 781424 on 03-Oct-2011 01:45

Hello,
It is possible. (I have the version 6i, 9.0.2 , 9.0.4 , 10gR2 and 11gR1 on the same PC)
The only point to take care of is the variable PATH.
You can create some BAT files that will set correctly the PATH for each version
Regards

Running forms 10g from a discoverer ias installation. Is it possible?

Hi, I want to run an application based on forms 10g using an iAS 10.1.2 that is actually been used to run Discoverer. In the iAS directory structure I can't find the "forms" folder or any of the configuration files (formsweb.cfg, default.env, Registry.dat, etc). Anyway, I could find OC4J_BI_Forms, and when I run "opmnctl status" that service is up and running (Alive).
In order to install and run my forms application:
- Do I have to install the "forms server" component to this iAS?, or may I use the current OC4J_BI_Forms to run other forms (and libraries)?
- Or maybe, do I have to install the forms enabled iAS in a different ORACLE_HOME to be able to run my forms?
I guess the version and releases numbers are not completely relevant. All I know about versions is the installed iAS whose release is 10.1.2.
Thanks in advance
RuBeck

You can easily do this using pack & unpack.
Change the machines in the managed servers where SOA is running. Pack the domain with -managed option. Unpack the domain in the new machine. Start the soa server now. It will start using the resources in the new machine.
Eg:
Currently Machine A has Admin Server, One WLS Managed Server & One SOA Server. You want to shift SOA server to machine B. Change the machine of SOA server using Admin Console. Pack the domain in Machine A. It will create a template jar. Copy the jar file to Machine B. Unpack it there.
Make sure, you have same MW_HOME & ORACLE_HOME directory structure in both Machine A & B.
My answers are based on that you are on 11gR1.

FRM-92101 error when changing the passwd when running Forms 10g application

Hi Friends,
Issue is with: Getting FRM-92101: There was a failure in the Forms Server during startup. This could happen due to invalid configuration. Please look into the web-server log file for details.
Steps i followed.
1. Start th OC4J instance of the oracle 10g.
2. Login with one user/passward and opens Forms 10g application
3. By Using One Form, changed the passward of the current user.
4. then closed the Form and then try to close the Forms Application.At this stage i got an error message FRM-92101: There was a failure in the Forms Server during startup. This could happen due to invalid configuration. Please look into the web-server log file for details.
I verified the log files but i did not get any relevent information
Please help in this scenario.
Regards
Madhava Rayalu

Could you paste the complete error message?
Does this works fine when you change the username /passwd for other users ?
Rajesh Alex

Unable to run forms on Oracle10G

Hi all,
I had installed Oracle Developer suite and was running forms on port 8888 but I was getting
FRM-92100 error.
SO I though that Application Server need to be installed separately.
So I intalled Application Server.
And included the forms.conf in application servers httpd.conf file.
but still forms are stuck in browser.
http://127.0.0.1:50573/Cx63yWCQo8iSUxG6dA5Fv5BFNYArTWULRfJ0BnnnuvF5nhin
ORACLE FORMS
Any body know how to configure this.

Hi Simon,
One thing I forgot to tell is
OC4J is running. I run it by ./j2ee/DevSuite/startinst.sh
The page is not comming on http://host:8888
but One page comes on http://host:8888/j2ee
Please guide on how to make WEB SERVR UP
Thanks

Run form 10g from another computer

Hi all!
I created form on my computer and run success.Now,I want to run my form on another computer
How I can run form another computer?
Thanks all!

In general you have an url to call a form from any computer. This looks like
http://server:port/forms/frmservlet?<parameters>The parameters specify which acions should be taken, as you define the form to start, the user, ...
To "hide" these parameters, you can specify a "named section" (identified by a line like [thenameofthesection]) in the formsweb.cfg where all the parameters are defined, and give only the name of the configuration you want to start, like
http://server:port/forms/frmservlet?config=thenameofthesection

How to run form 10g fmx file..

Hi Everyone,
This is my first post in forums
I have a problem
In the run time xyz.fmb file create a xyz.fmx file
after that i cannot run this xyz.fmx file without using Developer
Can anybody give me this solution how can i solve it
Please please...
Give it step by step...

hi
please modify formsweb.cfg and create u r own config.something like this.
Example Named Configuration Section
# Example 1: configuration to run forms in a separate browser window with
# "generic" look and feel (include "config=sepwin" in the URL)
# You may define your own specific, named configurations (sets of parameters)
# by adding special sections as illustrated in the following examples.
# Note that you need only specify the parameters you want to change. The
# default values (defined above) will be used for all other parameters.
# Use of a specific configuration can be requested by including the text
# "config=<your_config_name>" in the query string of the URL used to run
# a form. For example, to use the sepwin configuration, your could issue
# a URL like "http://myhost.mydomain.com/servlet/f90servlet?config=sepwin".
[CONFIG]
form=login.fmx
separateFrame=True
lookandfeel=oraclesarah

Unable to run form 10g in IE too

Similar Messages

Maybe you are looking for