Unable to run query from BEx query designer

Hello,
I am connecting remotely to clients environment. I am not able to run query from Bex query designer. System generates IE window with URL
http://server.com:50300/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=ZCOPCM02_Q017&VARIABLE_SCREEN=X&DUMMY=9
but query result isnt shown.
Internet Explorer cannot display the webpage.
What kind of setting do I need to change to get query working?
thanks

Hi Comandante,
If you are not able to Execute the Query using Query designer, you can also execute the query using RRMX or RSRT transaction for now until the issue with the query designer is solved ..
Hope it helps!
Regards,
Pavan

Similar Messages

Unable to view report from Bex Report Designer

Hi,
When I log on to Bex Report Designer, I click execute button, it is giving a blank page. It is neither giving any error nor any message. We have recently installed NW2004s and BI Cont 703. Now my problem is how to make report visible in the BEX Report Designer.
Thanks,
Subhani

Dear Prakash,
Thanks for the quick reply.
I have religiously followed your Blog. As far as I know any one who wanna setup BEx has to follow this. It is the one place where all the settings related to BEx front end were discussed and disclosed. Thanks a lot for your exemplary attempt.
Though you have mentioned about the .NET frame work I could not understand how it will effect the "insert" menu of BEx report designer. But i have checked that also and its matching with your recommendations.
My question is pretty simple. With sapgui6.40compilation5 with all the latest patches both for gui, BW and BI. Will i get the options of "Report section", "Report section based on Querry"in the "insert" menu of BEx report designer.
The mentioned options "Report section", "Report section based on Querry" were shown in the webnair of BEx report designer. Pls check the link:
(As per the SDN these menu items should be available in BEx report designer..Pls observe the Insert menu in the very first few seconds)
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9c059b57-0701-0010-3283-e5e8669f827e
We have installed and upgraded the system to spstack 8 and done all the settings. Our front end is also updated with the service packs. But we could not get those options. If you can give me your mail id i can send you the screen shots.
Thanks & Regards,
Sridharb

Settings for SAP Portal start page from BEx Query Designer

Hi!
In order to see queries I would like to use SAP Enterprise Portal from BEx Query Designer.
When I push "execute" button within BEx Query Designer a wrong page will be shown in browser.
I changed the settings in table RSPOR_T_PORTAL, but still get the wrong Portal page shown in browser.
Question:
What is the transaction/table/report to customize the portal start page using by BEx Query Designer?
Thank you very much!
regards
Jürgen

Hi Anton?
Many thanks for your reply.
But I mentioned that I changed the URL within table RSPOR_T_PORTAL and this does not help...
Do you speak Russian? Me too
Can you also help me with the following problem?
Hi!
I am about to implement SAP Best Practices scenario "B34: Accounts Receivable Analysis".
Therefore I load the data from SAP ERP IDES system into SAP NetWeaver 2004s system.
My problems are:
when I try to load the transaction data for Infosources 0FI_AR_4 and 0FI_AR_6 from SAP ERP system the following happens:
- the status is getting u201Cyellowu201D (194 from 0 records)
- at the next day the status is getting u201Credu201D and I received the following error:
Errors while sending packages from OLTP to BI
Diagnosis
No IDocs could be sent to BI using RFC.
System Response
There are IDocs in the source system ALE outbox that did not arrive in the ALE inbox of BI.
Further analysis:
Check the TRFC log.
You can access this log using the wizard or the menu path "Environment -> Transact. RFC -> In source system".
Error handling:
If the TRFC is incorrect, check whether the source system is fully connected to BI. In particular, check the authorizations of the background user in the source system.
Comment:
I did not find any entries on "Environment -> Transact. RFC -> In source system"
The Source system connection EC6CLNT100 is OK
Can some one help me to solve this problem?
Edited by: Jgen Pfeiffer on Feb 5, 2009 12:48 PM

Facing prolem in Dashboard 4.1, while fetching data from Bex Query

Hi Exports,
I am facing an error message " Failed to (de-)serialise data. (Xsl 000004)" while fetching data in Dashboard from Bex Query.
The query is getting connect. while drag n drop some dimensions and measures then going for Refesh or Run Query, geting this error.
The same query is working fine with other comp like webi n crystal.
Anybody having solution for this please let me know. I am stuck somewhere.
Thank You

Hi,
Check the data in the infoProvider.Reduce the Bex query Characteristics & Key figure fields.Try to identify due to which characteristsic adding in Bex Query ,are you facing the issue.Check that characteristic data in the infoProvider.
Regards,
Venkat

How to buld Crystal report using data from Bex query

Hi,
I have requirment where the end user wants the query in Crystal.I built a Bex query in Bex query designer.I would like to know how to create crystal report based onthe Bex query.
Thanks,
Chandra

Hi Chandra,
Here is the docuemnt which explains you in detail about the steps to create Cyrstal Report using BEX Query.
https://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/004aacbb-4983-2b10-8da7-cdff5dcbb948&overridelayout=true
/people/ingo.hilgefort/blog/2008/02/19/businessobjects-and-sap-part-2
Regards
SIndhu

RRI? How to call ITS URL and pass field value from Bex Query.

I am doing RRI from query to webaddress,
i have defined jump(report type: webaddress and reicver report as url) from shopping cart bex query(SRM ) to webaddres.
here url is SRM ITS base link for monitoring shoppingcart(http://(hostname):(SRM port)/sap/bc/gui/sap/its/bbp_mon_sc?sap-client=200&sap-language=EN).
jump is working from portal(from bex query ivew).
but i want to pass value(shopping cart value) to above url and want to skip first screen.
i have maintained assignment detail by assigning field name against shopping cart infoobject with type url parameter, but its not directly call reciver url with given input field.
i tried the diffrent combination of url and field assignment as like below:
1: web address url:http://(hostname):(SRM port)/sap/bc/gui/sap/its/bbp_mon_sc?sap-client=200&sap-language=EN
assigned field: GS_HEADER-OBJECT_ID
but when we call reciver url from portal bex ivew, only initial screen come with page url as below:
http://(hostname):(SRM port)/sap/bc/gui/sap/its/bbp_mon_sc?sap-client=200&sap-language=EN?GS_HEADER-OBJECT_ID='selected number value'
2: web address url:http://(hostname):(SRM port)/sap(cz1TSUQlM2FBTk9OJTNhc3JtZGV2X0lTRF8wMCUzYUdxdFNqdWdMS2xyTEFEelFTNFlWTnJXRjEzdy05UnhTWXl4TW03c3AtQVRU)/bc/gui/sap/its/bbp_mon_sc/~flNUQVRFPTgzMTcuMDAyLjAxLjAx====#jump_to_selected_sc
assigned field: flNUQVRFPTgzMTcuMDAyLjAxLjAx
but when we call reciver url from portal bex ivew, only initial screen come with page url as below:
http://(hostname):(SRM port)/sap(cz1TSUQlM2FBTk9OJTNhc3JtZGV2X0lTRF8wMCUzYUdxdFNqdWdMS2xyTEFEelFTNFlWTnJXRjEzdy05UnhTWXl4TW03c3AtQVRU)/bc/gui/sap/its/bbp_mon_sc/~flNUQVRFPTgzMTcuMDAyLjAxLjAx====#jump_to_selected_sc?flNUQVRFPTgzMTcuMDAyLjAxLjAx='selected number value'
I have seen the source code of that url(inital screen and after entring the value to that screen) too.
how to call webadress(SRM ITS base shopping cart URL) with passing the one of field value of that url screen?
Thanks and regards,
Dushyant.

Declare the gv_orderid in modulepool program.
And Declare the parameter as import parameter in smartform.
CALL FUNCTION lv_form
   EXPORTING
*   ARCHIVE_INDEX              =
*   ARCHIVE_INDEX_TAB          =
*   ARCHIVE_PARAMETERS         =
*   CONTROL_PARAMETERS         =
*   MAIL_APPL_OBJ              =
*   MAIL_RECIPIENT             =
*   MAIL_SENDER                =
*   OUTPUT_OPTIONS             =
*   USER_SETTINGS              = 'X'
   i_input                    = gv_orderid
* IMPORTING
*   DOCUMENT_OUTPUT_INFO       =
*   JOB_OUTPUT_INFO            =
*   JOB_OUTPUT_OPTIONS         =
* EXCEPTIONS
*   FORMATTING_ERROR           = 1
*   INTERNAL_ERROR             = 2
*   SEND_ERROR                 = 3
*   USER_CANCELED              = 4
*   OTHERS                     = 5

Calling ABAP report from BEx query

Good day!
I want to call ABAP report from BEx query by right-clicking on the field and using context menu. I know that transaction RSBBS is used (sender-receiver connecting), but I don't know how to transfare data to ABAP program
In ABAP program I want to know at least data from those cell in BEx query, that was right-clicked.

Depending on your requirement and environment, you have the following options:
1. Use an info spoke and make selections as you would in a query.
2. USe FM RS_VC_GET_QUERY_VIEW_DATA_FLAT to send the data to a file and your ABAP can read this file.
Ravi Thothadri

Universe Designer not pulling Long Text from BEx Query / Info Object

In the BEx query on which my universe is built, all the characteristics display with Long Text. In each of the info objects (RSD1), the long text option is selected in the BEx properties. However, when the Universe builds, it pulls the short text for the names of the classes, dimensions, and details that get created. I don't want to have to manually change every line to the long text, so I would love to hear if there's some setting in the designer that is causing this to happen.
Anyone know how to fix this?
Thank you!
AZ

Another interesting data point to add to this:
The long description is transfered for Key Figures, but not for Characteristics.

How to refresh report data from bex query (BW) with parameters

Hello,
i hope someone can help me with my problem. I developed an desktop application, which loads (actual state) a report from the local file system. After setting the parameters, the report should be saved as a pdf file. Loading the report into the ReportDocument object and exporting the report to a pdf works fine. Setting parameters (without) a data source too. But now i can't refresh the data in the reports given by a parameter (e.g. time).
I know there are two methods to do this. Push and pull. I want to use the pull method, cause my program should exports different reports and i think it should be easier to handle this with this method.
On my development environment is installed:
Crystal Reports SP 4
MS Visual Studio 2010 (coding with C# .NET)
.NET Framework 4
SAP Integration Kit
Crystal Reports for Visual Studio 2010 SP1 - SDK libraries
Crystal Reports for Visual Studio 2010 SP1 - Runtime 32 bit
SAP GUI 7.20 (Compilation 3)
The bex query is enabled for external use from ole db for olap. Do i have forget something else?
Here is a part of my code:
 public ReportDocument doPullMethod(ReportDocument crReportDocument)
 TableLogOnInfo crTableLogOnInfo = crReportDocument.Database.Tables[0].LogOnInfo;
 ConnectionInfo crConnectionInfo = crTableLogOnInfo.ConnectionInfo;
 crConnectionInfo.Password = "*******";
 crReportDocument.SetDatabaseLogon(crConnectionInfo.UserID, crConnectionInfo.Password, crConnectionInfo.ServerName, crConnectionInfo.DatabaseName);
 MessageBox.Show(crConnectionInfo.UserID + " _ " + crConnectionInfo.Password + " _ " + crConnectionInfo.ServerName + " _ " + crConnectionInfo.DatabaseName);
 for (int i = 0; i < crReportDocument.Database.Tables.Count; i++)
 // crReportDocument.Database.Tables.ApplyLogOnInfo(crTableLogOnInfo);
 MessageBox.Show("TestConnectivity: " + crReportDocument.Database.Tables.TestConnectivity());
 return crReportDocument;
Cause i'm using only one bex query, i know that the SetDatabaseLogon()-method should bring me the same result as the ApplyLogOnInfo()-method SAP Crystal Reports .NET API Guide
Exists an order which i have to follow? First setting parameter and then set the login informations or backwards? Cause i also get the "Failed to load database information" exception, when i set a parameter and TestConnectivity() returns false.
Do i have to activate the data refresh manually or will be the data refreshed automatically on export?
I searched in this forum (.NET - SAP Crystal Reports) and found only this thread which according to my problem:
[Re: Crystal report connects to BW RFC by .NET;
The question is assumed answered.

Hi Robin,
There is a SAP Integration Kit you need to allow CR to connect to SAP data sources. There isn't one for CR for VS 2010 and I don't believe there are the various extra options available in the SDK, no SDK access to the DB driver.
Possibly, Check the other post, download and run the app Ludek suggested, it will get the connection info for your report using RAS and then plug the output code into your code and see if that works. It should show the crdb_olap dll is the database driver, assuming that is the connection method you used when designing the report.
Pay attention to the database dll in the output from that app and verify it is on your PC in: C:\Program Files (x86)\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win32_x86
If that doesn't work then.....
The problem is, CR for VS 2010 ( version 13 ) is the runtime for BOE 4.0 ( version 14 ) which includes the Integration kit drivers on install. There is no standalone install of the database drivers. They are installed with CR 2011, which doesn't have a SDK included, CR for VS 2010 is also the Developer version for CR 2011.
Because of the "custom" connection requirements there is no SDK or access to the BW datasource extra options....
Also note that CR 2008 is not supported in VS 2010, it should work though as long as you stick to 2.0 -> 3.5 framework, no 4.0 Framework support in CR 2008 or BOE 4.0
You may want to try the SAP Integration Kit forum to see if anyone has been able to make this work or contact your account manager to verify if there are any plans to do what you are doing....
Don

Custom Hierarchy sub selection from BEx Query to Webi

Hi All,
The client has requested that from a hierarchy only certain accounts / account nodes be brought into the Webi report.
I have made a Account Number Filter in the BEx query containing the nodes that the client has requested. In order to get a hierarchical view, I activated the hierarchy display through BEx and selected the hierarchy the the selection of the nodes came from.
I ran the report through Analyzer and all works - the only nodes that show are the nodes that were filtered on through query designer and all lower nodes below it. It displays as a hierarchy properly.
When running in Webi, I bring in the hierarchy object for Account number and the report crashes giving me the general Webi error. (I have added a screenshot).
In conclusion, what I am trying to do is take a sub selection of certain account nodes from a hierarchy and display those nodes with all lower levels below in a hierarchy. It works in BEx, not in Webi.
If this won't work in Webi, any idea how to build this in BEx so it will work in Webi?

I haven't tried this myself yet - but did you register your Google API key? Please see Google Maps in SDK Extension

Error when trying to open new query from Bex

Hi guys,
I m trying to open query designer from Bex explorer and i get the following error: The macro 'sapbex.xla!reponewquery'cannot be found.
Can anyone please tell me how to rectify this? thanks in advance

Sunil,
Go to Business explorer>Analyzer>Business Explorer-->Installation check and click on Start button.
You will be able to know if its properly installed or not.
Also check note 197460;938540
-Doodle
Message was edited by: Doodle

Removing or Suppressing 0DAT SAP Exit from BEx Query

Hi,
I have a BEx Query on a MultiProvider. The Multiprovider is based on two Cubes. Iam facing a problem with the 0DAT Characteristic Variable on 0CALDAY. Although I dont use the 0CALDAY in my query, this SAP Exit Variable pops-up when I run the query. How do I remove or atleast suppress it from popping-up?
I tried the 'Save & Reuse Varibale Values' options from the Query Properties Dialog Box. Although this works but I want to use one more Customer Exit Characteristic Variable on 0CALDAY & this variable is also getting resued because of the setting I made for 0DAT. I want this variable to pop-up and the 0DAT variable to be removed completely(or atleast suppressed).
Would also like to know why 0DAT Variable is popping-up even when I dont use 0CALDAY at all....
Thanks in advance,
-Ravi

Hi,
Please refer to your following mail..I have the same problem with 0dat. Could you provide me any solution for this..
Thanks & Regards,
Karthi
> Hi,
>
> I have a BEx Query on a MultiProvider. The
> Multiprovider is based on two Cubes. Iam facing a
> problem with the 0DAT Characteristic Variable on
> 0CALDAY. Although I dont use the 0CALDAY in my query,
> this SAP Exit Variable pops-up when I run the query.
> How do I remove or atleast suppress it from
> popping-up?
>
> I tried the 'Save & Reuse Varibale Values' options
> from the Query Properties Dialog Box. Although this
> works but I want to use one more Customer Exit
> Characteristic Variable on 0CALDAY & this variable is
> also getting resued because of the setting I made for
> 0DAT. I want this variable to pop-up and the 0DAT
> variable to be removed completely(or atleast
> suppressed).
>
> Would also like to know why 0DAT Variable is
> popping-up even when I dont use 0CALDAY at all....
>
> Thanks in advance,
> -Ravi

Need to remove prompts which is comes from Bex query

Dear Experts,
Currently i am working in webi report (4.0 SP2), Back end of this webi report is SAP Bex query, created by using BICS Connection. In bex query we have created different variables on Company code,vendor, business area, key date etc. from this company code and key date are mandatory variables.
My Bex users need input screen to execute the report as per their requirement. But my webi users don't required any prompts. they want to manipulate data by using input controls.
Req : How to avoid variables (Prompts) which is coming from bex?
Regards,
PRK.

Hi Praveen,
As per my knowledge, We can not remove mandatory BEx variables from the Webi prompt screen. Value for mandatory Query Variable has to be pass from Webi report.
You can create another Bex Query without any variable and need to use for reporting in Webi.
~Anuj

Error while connecting executing a webi report from Bex query.

hi all,
i need to create one webi report fron Bex query based on sab BW.
But when I execute the query its shows "Unspecified error invoking method or accessing property "on change DocID"".
i didnt get this msg.
please help

Hi Mohit Gupta,
Degrade the java version to java 7 update 45 and also degrade the java security level to low from medium. Also delete the java temporary files and also clear your IE browser cache as well.
This solved the issue for me.
Thanks,
Chaitanya Krishna

Getting zero-sized reply error when running report from SQL query

Hi,
I have a Report from SQL Query in Portal. When I select Excel in Output Format and then run the report, it works properly, but when I select HTML in Output Format, the report works if the rows returned are not so many (I've been able to display the report for up to 701 rows), but when I try selecting a value from the LOV that selects many rows, I get the following error:
ERROR
The requested URL could not be retrieved
While trying to retrieve the URL: <data suppressed>
The following error was encountered:
Zero Sized Reply
Squid did not receive any data for this request.
Any ideas on how to fix this? Why does the number of rows returned affect the report this way?
Thanks,
Lorena

Problem comes when any of the filter is applied in any one of the cases selected from the GUI.Do you mean that the problems only shows when you run the report in your browser via 9iAS?
Which version are you using?
Can you post the before report trigger?

Unable to run query from BEx query designer

Similar Messages

Maybe you are looking for