Unable to Run Real Time Job Idoc Processing.

hi experts,
i am trying to run a job in which i m trying to process a SAP IDOC.
my source is an MATMAS03 type IDOC MESSAGE.
I m running it through Management Console.
the RFC is working fine, but when the idoc is getting processed, at the end i m getting the below error.
*(12.2) 12-28-11 18:11:08 (E) (6132:5932) Unknown: R3RfcClient(DI_CLIENT) ActaIDocFunc::Process() encountered processing error for Requeste(1) (Processing timeout.) (IDOC
0000000000650143+/T90CLNT090). (BODI-300129)*
here DI_CLIENT in my RFC, which i have maintained using the below link:
http://wiki.sdn.sap.com/wiki/display/BOBJ/ConfigureSAPtosendIDOCstoDI
please help me share if u have any other link or sample document to transfer data from SAP ECC using IDOC.
thanks

Hello Sasha,
     I am also getting the same problem but apart from error 300129 i am also gettiing 300137.
     Is it that way that i have to use "R3RfcClient" only as the Program ID.?
    Do you have any clue to solve other error also?
Thanks in Advance.

Similar Messages

Error while running Real Time Job through SOAP UI

Hi Experts,
I am using real time job for search the duplicates in the data base using attribute values. After running the job iam getting correct result in the xml message.
I configured real time job in management console and taking the WSDL and giving the in put in SOAP UI then iam getting the message like this after 2 timedouts.
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<soapenv:Body>
<soapenv:Fault>
<faultcode>soapenv:Sender</faultcode>
<faultstring>Web Services is unable to process the request to call real-time service 'RT_SEARCH' using Access Server 'uplt-abk-052:4000'. Error: Server sent back error: Communication Error. See real time job log for details.</faultstring>
<faultactor/>
<detail/>
</soapenv:Fault>
</soapenv:Body>
</soapenv:Envelope>
In the real time job log file iam getting the message like this
(12.2) 06-01-10 09:37:41 (E) (0620:2732) Unknown: SP(RT_SEARCH, UPLT-ABK-052:3501)::flowThread() Flow became invalid while waiting for reply from real time job. (BODI-300136)

In Management Console,
PLease take a look at websevices-> partciular JOB-> historyLog-> errorlog and tracelog to see the more details of the error. It should definetly whats the cause of the error.
-Subhadra

IDoc not getting processed in Real Time job

Hello,
The configurations are done as per the below link to receive iDoc from SAP in BODS.
How to Receive IDOC in BODS from SAP (Outbound to SAP)
An iDoc is sent and Real Time Services on management console shows that request is received successfully. But I cannot see output xml file created. When I checked the real time services and client interfaces, I could see all are in green.
But the real time job status shows its in running state. It has been in running state for 2 days. Trace shows as below. There is no error message.
14.2) 04-24-14 18:47:41 (18417:1140171104) JOB: Optimizing job <JOB_BODS_RT_IDocMatmas01>.
(14.2) 04-24-14 18:47:47 (18417:1140171104) JOB: Job <JOB_BODS_RT_IDocMatmas01> is started.
(14.2) 04-24-14 18:47:47 (18417:1140171104) DATAFLOW: Data flow <DF_RT_IDocMatmas01> is initialized.
(14.2) 04-24-14 18:47:47 (18417:1140171104) DATAFLOW: Data flow <DF_RT_IDocMatmas01> using IN MEMORY Cache.
(14.2) 04-24-14 18:47:48 (18417:1140171104) DATAFLOW: Data flow <ActaDefaultNotificationSender> is initialized.
(14.2) 04-24-14 18:47:49 (18417:1140171104) DATAFLOW: Data flow <ActaDefaultNotificationSender> using IN MEMORY Cache.
Can anyone please let me know if there is anything missing in the configuration? How do I resolve this issue?
DS version: 4.2

Hi,
Try to reimport the metadata of IDOC into PI in idx2. Also check the port definition in ECC and whether the segment is released or not. Please go through the below discussions it may help you.
EDISDEF: Port XXX segment defn E2EDK35 in IDoc type ORDERS05 CIM type
IDoc 0000000000181226 was saved but cannot or should not be sent
Regards,
Priyanka

Is there a way to create dependency on the real-time jobs

Hi,
We have around 80 real-time services running and loading the changed data into the target.
The process being used is
IBM Informix > IBM CDC > JMS (xml messages) > DS real-time services > Oracle EDW.
While using the above process, when ever there is change in the fact table and the dimension table, both the real-time services are loading the data at the same time into the target. This is causing issues in looking up data with the timing issue.
Is there a way where we can create a dependency and resolve the timing issue and make sure the lookup table is loaded and then the master table is loaded?
Please let me know.
Thanks,
C

Hello
With the design you curently have, you will have potential sequencing issues. There is no magic in Data Services to solve this.
You might want to consider building more complex real-time jobs that accept more complex data structures and have logic to process the data in dependency order.
Michael

File lock in real time job

Hi All,
I encountered an file lock error when creating a real time job.
After a dataflow, I have a script to move the processed file to archive folder. (e.g. move c:\source\order.xml c:\archive). When I test run it, I received a 50306 error. It saids "The process cannot access the file because it is being used by another process. 0 file(s) moved.". However, the df and script were running OK in batch job. Also, I can move the files manually after the job failed. Can anyone help me with that? Is it something to do with the setting of realtime services?
Many thanks!
Knight

hi,
Not sure but you can check in sm12 if there is any lock entry, if so than manually delete and than check again.
Ray

WSDLXML error in Web services for real time job

Hi Experts,
I want to use Data Services as a web services.
I have configured a Batch job and Real time job that is available as a web service.
Web services for Batch job is no problem. but Real time job is problem
I get the following error message in the WSDLXML
<tns:documentation>Web Services published by BusinessObjects Data Services Version 12.1.0.0, using Apache Axis 1.1The following errors and warnings were found during WSDL generation. Please refer to the Data Services Administrator for detailed explanations. *** Unable to create WSDL for service: job_testconnectivity.</tns:documentation>
Version is DATA SERVICES XI (12.1.0.0)
Edited by: moon bum cho on Dec 1, 2008 3:00 PM
Edited by: moon bum cho on Dec 1, 2008 3:15 PM

check whether the Access Server for which this service is configured is running
the real-time service configuration is saved with Access Server, management console will get the information from Access Server while generating the WSDL
to check the status of access server
click on administrator -> Access Servers
click on the Access Server and click on Ping

Real time job doesn't receive automatically changes in SAP ECC 6

Hi Experts,
 
 I'm trying to (using Data Integrator) automatically retrieve data from SAP ECC and store it in a local database table. I followed the steps written in this article: http://wiki.sdn.sap.com/wiki/display/BOBJ/Receiving+IDOCs. I'm modifying some records in the Cost Center Master Data (CSKS) and using COSMAS01 as the IDOC in which I'm trying to send the information.
 
 All seems to be OK, since I manually sent a Cost Center data row using the /nbd16 transaction, SAP ECC displayed a message telling that an IDOC had been generated. Also, when I checked the IDOC status in BD87 it had status 03, meaning that it had been sent correctly.
 
 In Data Services when I clicked on 'View Data' in the local database table that I put in the dataflow I could see the rows that I manually sent from the ECC. However, after truncating the local table, it bothered me that when I tried to send manually a second IDOC with another row from the Cost Center Master Data table, my real-time job didn't receive the request and consequently didn't insert the desired rows. I didn't change anything in the configuration, so my first question to any of you is that if you know what could it be that causes my real-time job to not receive the request from ECC?. I tried making a third try, but at my company they had to shut down the ECC server, so it's going to be a while before I make another try.
 
 Now, the REAL question of this post is that after I sent the first IDOC successfully (and before sending manually the second one mentioned earlier), I changed a record in the CSKS table directly in the ECC, hoping that it would automatically generate an COSMAS01 IDOC and send all the data in the table to the Data Integrator. This didn't happen and no IDOC was generated, so do any of you know why the automatic change didn't trigger the sending of the IDOC with the data?
 
 As I said before, I made the configuration in ECC and DI following the steps in the link written at the start of the post, and it was tested OK by successfully sending a COSMAS01 IDOC once, manually using bd16.
 
 In advance I thank you all for your cooperation. This is my first thread in the SDN forum so also please excuse any mistakes in my english.
 
 Best regards...

You do not need to schedule this job every 10 min. Why?
If we can't schedule this job every 10 mints how can I able to retrive the delta records into Queue(RSA7)
What is your advice I mean how to schedule in order to get the delta?
Thanks

11gr2 Dataguard Active Standby - Unable to get Real-Time apply working

As above, I am unable to get real time apply to work WITHOUT it switching my standby back to MOUNT state. There does not seem to be anyting obvious from the broker, or alert logs.
On the Standby:
SQL> alter database recover managed standby database cancel;
Database altered.
SQL> alter database open read only;
Database altered.
SQL> select open_mode from v$database;
OPEN_MODE
READ ONLY
SQL> alter database recover managed standby database using current logfile disconnect;
Database altered.
SQL> select open_mode from v$database;
OPEN_MODE
MOUNTED
Primary:-
SQL> SELECT status, recovery_mode FROM v$archive_dest_status where dest_name = 'LOG_ARCHIVE_DEST_2';
STATUS RECOVERY_MODE
VALID MANAGED REAL TIME APPLY
Edited by: Imran on Apr 17, 2012 10:56 PM

Hello;
This is expected.
Works the same exact way on my system. How Redo Data is applied is set when the database is MOUNTED.
See - 6 Redo Apply Services
Data Guard Concepts and Administration 11g Release 2 (11.2) E10700-0
The document is vague on this at best, but think about the error you get if you try to start apply twice.
Data Guard Real-Time Apply FAQ [ID 828274.1]
Best Regards
mseberg
Edited by: mseberg on Apr 17, 2012 10:04 AM
h1. Test
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> alter database recover managed standby database cancel;
Database altered.
SQL> alter database open read only;
Database altered.
SQL> alter database recover managed standby database using current logfile disconnect;
Database altered.
SQL> select open_mode from v$database;
OPEN_MODE
READ ONLY WITH APPLY
SQL> So I get different results ??
Edited by: mseberg on Apr 17, 2012 10:40 AM
h2. Still more
I would like to change my answer. Based on my test and queries as shown below I believe REAL TIME apply is working. Note the last log says NO because its in progress.
Checking last sequence in v$archived_log
STANDBY               SEQUENCE# APPLIED    COMPLETIO
STANDBY                     343 YES        16-APR-12
STANDBY                     344 YES        16-APR-12
STANDBY                     345 YES        16-APR-12
STANDBY                     346 YES        16-APR-12
STANDBY                     347 YES        17-APR-12
STANDBY                     348 NO         17-APR-12
6 rows selected.
----------------Last log on Primary--------------------------------------|
MAX(SEQUENCE#)
           348
1 row selected.Yes, I doubled check and it works on mine. I guess I read what I wanted to read.
All my Standby redo are setup correctly ( size and numbers )
READ ONLY WITH APPLYYour answer my be the Uwe answer at the end of this thread :
Enabling the Active Dataguard and Real Time Apply
Best Regards
mseberg
Edited by: mseberg on Apr 17, 2012 10:50 AM

Webservices for real time job.

Hi all,
I have configured a real time job that is available as a web service. There was no problem for the first time. However I wanted to change some of the input and output fields on the real time job.
So i modified the real time job in the Designer.
I removed and created the Real time service in the administrator. I have also renamed the Real Time SErvice.
I recreated the webservice for the renamed real time service.
However I am still getting the "old" wsdl with the old real-time service name.
Seems like the WSDL is not updated.
Am i missing out any steps to "refresh" the wsdl?
Thank you.

which version if DI ?
the WSDL should get updated once you add the Real time Service to the Webservice
do you see the Real time service in the WebService status page ?
click on View WSDL, it will open the WSDL in IE, do a find for the service name in that

Real Time Job with no Message Target?

Hi All. I'm curious to know if anyone has built a real time job without an xml message target. I thought that any message source 'getting' from a Topic does not require a response. Well data services is not letting me get away with not having the message target.
The message I'm receiving is one that I want to insert into a table, it is not being used in a lookup to then send out a new record out to a message target.
Real Time jobs are still a new concept to me. Thanks in advance for your help.

Hi,
Try using a row generation transform, generate one row and pass a hard coded value as output message. You cannot do away with an output message in the case of real time.
Regards,
Suneer

Triggering Real time job from Batch jobs..

Can we trigger real time jobs from the batch jobs. As soon as batch job completes we need to start real time job automatically. Is this possible with BODI XI?

Greetings Post Originator,
This post is older than 60 days and there are no entries in the past 30 days. Based on the content discussed, it appears that you question has been answered. This message is being marked as answered and points are being assigned if available where possible.
Thank you for being an active participant in the SAP Forums,
Rob Siegele
Forum Moderator
SAP Americas

It is possible to run a timer job in Office 365 online?

Hi All,
Is it possible to run a timer job on 1st of every month for a list in office 365? I have a requirement that I need to send data of current month via email on 1st of every month. should I use timer job in Office 365?
Thanks in Advance.

Hi Darsh,
There is no option available to run a timer job in SharePoint Online (Office 365), SharePoint timer job option is available only in SharePoint On-premise.
Microsoft Office 365 provide an alternate of the SharePoint timer Job "Web Jobs" on Azure. You can create Web Job by 2 types
Web Job as a App on SharePoint
Web Job as a scheduler
Read the below articles
http://blogs.msdn.com/b/kaevans/archive/2014/03/02/building-a-sharepoint-app-as-a-timer-job.aspx
http://blogs.msdn.com/b/richard_dizeregas_blog/archive/2014/04/07/sharepoint-timer-jobs-running-as-windows-azure-web-jobs.aspx
Vivek Jagga
My Blog

Unable to run a Real_time job in Data services.

Hi guys,
I have a scenario that i am reading the data from SAP using an idoc, into data services, and but i am getting an error while Configuring Real time sevices and in Service provider when we add job server over there, so the real time services are not starting. could you help me what are the possible ways to troubleshoot that.

I'm not sure I understand you, on the CTI topic. CTI is a fundemental protocol when it comes to CUCM/UCCX, which is the future of telphony. No old school PBX's here, just packets.
I was just looking at the UCCX 9.0(2) REST API and it looks like there are some stats to be farmed there, however, it's so new, I cannot really speaek to it from experience.
Check it out:
http://developer.cisco.com/documents/11218258/11219470/Cisco-uccx-developer-guide-902.pdf?redirect=http%3A%2F%2Fdeveloper.cisco.com%2Fweb%2Fuccxapi%2Fhome%3Fp_p_id%3Ddoc_library_summary_portlet_WAR_doclibrarysummaryportlet_INSTANCE_b8N60ctZVvHc%26p_p_lifecycle%3D0%26p_p_state%3Dnormal%26p_p_mode%3Dview%26p_p_col_id%3Dcolumn-5%26p_p_col_pos%3D1%26p_p_col_count%3D2
Anthony Holloway
Please use the star ratings to help drive great content to the top of searches.

Introductory DI real-time job materials?

Hi, Has anyone come across any useful real-time "getting started" guides/ presentations/ reference materials / etc? We are on version 12.2.2.0. Up through today, we have used DI only for batch jobs but need to get familiar with the real-time side...
Thanks in advance!

Hi
This was written for Data Integrator, but the material is still valid.
http://www.sdn.sap.com/irj/boc/ds?rid=/library/uuid/20bd5e60-11f9-2b10-2bbb-b5109cceff08
Michael

Not able to run Real Time Report(Live report)

Hi all,
I am working on a report which need to be run on real time, i am facing difficulty while running it at my end(India),
getting error as View Display Error whereas my counterpart in United States running at her end getting the result easly,
server is located at United States,we share the same internet speed,I tried different means by putting appropriate filter
in order to reduce the data size but still couldnt see any result. Can anyone please suggest me what is the issue
and what need to be done in order to get the results for real time report faster at my end.
Thanks for help.

A couple of suggestions.
First, make sure you are reproducing the report conditions as well as the user access settings. Different user access can make a big difference in report performance.
Second, enter an SR with Oracle support. They may be able to help troubleshoot connection issues.
When we see dramatically different response times in different locations, this usuallly means a network issue. It may not be in your corporate network, but somewhere between you and the data center.

Unable to Run Real Time Job Idoc Processing.

Similar Messages

Maybe you are looking for