Unable to run reports from forms using run_report_object
Hi All,
I am unable to run a report(9i) from forms(9i) in client side.
I used the following code
Declare
repid REPORT_OBJECT;
v_rep varchar2(100);
rep_status varchar2(20);
Begin
repid := FIND_REPORT_OBJECT('report4');
v_rep := RUN_REPORT_OBJECT(repid);
End;
I get the following error
FRM-41219 : Cannot find report:invalid ID.
Any help will be highly appreciated.
Thanks,
Sanjay
Hi All,
I am unable to run a report(9i) from forms(9i) in client side.
I used the following code
Declare
repid REPORT_OBJECT;
v_rep varchar2(100);
rep_status varchar2(20);
Begin
repid := FIND_REPORT_OBJECT('report4');
v_rep := RUN_REPORT_OBJECT(repid);
End;
I get the following error
FRM-41219 : Cannot find report:invalid ID.
Any help will be highly appreciated.
Thanks,
Sanjay Hi
You have to create a report object within the form.
If you look at the Object NAvigator in the Form Builder right below Record Group
tou would see an option for Report. Create a new report object.
Set the following properties for that object
Filename - This should be the name of your RDF file you created from Report Builder along with the full path.
Set the Execution Mode, Communication Mode and Report Destination Type as per your requirements.
In the parameter for find_report_object() pass the name of the report object you created.
eg.
if the name of the report object you created is Report2 then
your call should be rep_id := find_report_object('Report2') .
You are calling the report object which has been created in your form builder and through that call you are running the report file specified in the Filename property of that report object.
Regards
Poorvi
Similar Messages
-
FRM-41214 unable to run report from forms with parameters
Hi all,
I am unable to run a report from forms if I pass parameters. Report is running fine in reports builder and in url if I access the report straightly.
I used set_report_object_property to pass the parameters.
Any clues to solve this problem?
PriyaHi Jeneesh,
Code is below:
myreport1 :=find_report_object('MYREP');
reportdata := Get_Parameter_List('reportsdata');
IF NOT Id_Null(reportdata) THEN
Destroy_Parameter_List( reportdata );
END IF;
reportdata := Create_Parameter_List('reportsdata');
Add_Parameter(reportdata, 'account_number', TEXT_PARAMETER, :parameter.account_number);
/* Setting the properties into Report Object */
SET_REPORT_OBJECT_PROPERTY(myreport1, REPORT_COMM_MODE, SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(myreport1, REPORT_DESTYPE, CACHE);
SET_REPORT_OBJECT_PROPERTY(myreport1, REPORT_DESFORMAT, 'htmlcss');
SET_REPORT_OBJECT_PROPERTY(myreport1, REPORT_SERVER,vc_reportserver);
SET_REPORT_OBJECT_PROPERTY(myreport1, REPORT_FILENAME, 'C:\priya\forms\EmcySummary.jsp');
SET_REPORT_OBJECT_PROPERTY(myreport1,REPORT_OTHER,'account_number='|| :parameter.account_number);
/* Value of v_rep identifies the report that is currently running either locally or on a remote report server */
vrep := RUN_REPORT_OBJECT(myreport1,reportdata);
/* Checking for Report Server is started or not, if not throw an exception else proceed */
if vrep = vrep||'_0'then
raise form_trigger_failure;
end if;
vjob_id := substr(vrep,length(vc_reportserver)+2,length(vrep));
vrep_status := REPORT_OBJECT_STATUS(vrep);
/* Checking the status of the report */
WHILE vrep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
LOOP
vrep_status := report_object_status(vrep);
END LOOP;
/* When the report status is successful then report is generated in Web */
IF vrep_status = 'FINISHED' THEN
-- COPY_REPORT_OBJECT_OUTPUT(vrep,v_tempstorage);
WEB.SHOW_DOCUMENT('/reports/rwservlet/getjobid'||vjob_id||'?server='||vc_reportserver, '_blank');
END IF;
---Any clues? -
Unable to run report from forms developer.
hi....
i m not very much in developer 9i.from last 2 month i m doing developer 9i.I m desiging and running
report from report builder.but i m not able to run that report from forms developer.Can anyone help to solve my problem?is there any particular extension i have to follow or any configuration(Application server) i have to made change?What code i have to write to run a report from forms?Hi frank...
Thanx for ur reply...
Actually what i did,i created a report and save that report with .rdf extension.I set reports_path(In Registry) property to the particular folder where i put all of my reports.In forms developer i add the report as report object from that folder.i set the following few lines in a button click event
--=============================================
declare
rep_id report_object;
v_rep varchar2(30);
begin
rep_id :=find_report_object('report4');
v_rep :=run_report_object(rep_id);
end;
--=============================================
when i click the button it is showing a error "You didnot specify the report name".This is all about from me what i did to run a report from forms.So should i do to run report? -
How to run report from form using run_object_report
I AM USNING FORMS9I/REPORTS 9I , HOW TO RUN REPORT FROM FROM USING RUN_REPORT_OBJECT AND HOW
TO PASS PARAMETER AS WE DID IN RUN_REPORTS PLEASE HELP MEhere an example !
I hope this example you can use it
PROCEDURE pr_reporte IS
BEGIN
DECLARE
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status Varchar2(20);
d1 DATE;
d2 DATE;
BEGIN
d1 := :GLOBAL.DIA_INI;
d2 := :GLOBAL.DIA_FIN;
repid := find_report_object('rep_lab02');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_OTHER,'p_fec_uno='||to_char((add_months(last_day(d1),-1) +1),'DD/MM/YYYY')||' '||
'p_fec_dos='||to_char(d2,'DD/MM/YYYY'));
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'pdf');
v_rep := RUN_REPORT_OBJECT(repid);
rep_status := report_object_status(v_rep);
WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED') LOOP
rep_status := report_object_status(v_rep);
END LOOP;
IF rep_status = 'FINISHED' then
WEB.SHOW_DOCUMENT('/reports/rwservlet/getjobid'||substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server=repserver','_blank');
ELSE
ventana('E','error reporte no encontrado','S');
END IF;
END;
END;
The 'rep_lab02' is the name of the report that you give in the node reports
p_fec_uno and p_fec_dos they are the parameters in the report
repserver is the name of server created with rwserver
Greetings -
Passing parameter to report from form using RUN_REPORT_OBJECT method
Will you please let me know how to do this. I tried using run_product but it is giving error as too many declarations. So I decided to use RUN_REPORT_OBJECT, but no help is provided how to pass paramters to this routine from FORMS to REPORTS.
If you just want to change the heading of a column dynamically, you can go with any of the two options. For both the options, you need to remove the static text and replace it with any dummy field (ensure the reference of field w.r. to repeating frame)
1. Use the Format Trigger and change the heading to either "school" or "college" based on your field value.
Ex.
If :<field_name> = 'S'
then :dummy_field := 'School'
Else
:dummy_field := 'College'
End If;
Return (true)
2. Another option is similar to this and uses a CF.
(I would prefer CF).
Warm Regards,
Raja. -
URGENT!!! Unable to run report from forms
I have created a from with one button. In when-button-pressed trigger is
DECLARE
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
BEGIN
repid := FIND_REPORT_OBJECT('produse');
v_rep := RUN_REPORT_OBJECT(repid);
END;
I added the report 'produse' in the object navigator under the reports with the folowing proprieties:
execution time: runtime
commnunication mode: synchronus
report destination type: preview
report destination format:html
report server:repserv (server created by me is up and running)
I am trying to display a report in html format .. or any format.. when i select file to 'report destination type' it say the sane error but the report appear in an office application 'Document immaging'
what is the problem? what settings do i have to make and where. i must specify that the server 'repserv' is configured automaticly.
if i add an extra code line into the above trigger
message(v_rep);
i get repserv_0
i have read the other posts on this problem and i havem't found the answer..or i don't know to interpret it?!In form's reports section set report destination type = cache, and use web_show_document to display the report.
On Metalink Note:207396.1 you can find details.
Paul -
hi all,
i have tried to run report from forms using below codig(got from online help)
DECLARE
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status varchar2(20);
v_host varchar2(100):= 'localhost';
v_port varchar2(10);
v_parameter_string varchar2(4000);
v_username varchar2(50);
v_password varchar2(50);
v_database varchar2(50);
BEGIN
repid := find_report_object('REPORT27');
v_rep := RUN_REPORT_OBJECT(repid);
rep_status := REPORT_OBJECT_STATUS(v_rep);
if rep_status = 'FINISHED' then
message('Report Completed');
copy_report_object_output(v_rep,'E:/Rep/local1.pdf');
-- host('MOZILLA E:/Rep/local.pdf');
-- WEB.SHOW_DOCUMENT('http://192.168.0.160:1521/reports/rwservlet/getjobid'||
-- substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server=repserver','_blank');
else
message('Error when running report.');
end if;
-- Get the full domain name of the server from the formsweb.cfg
tool_env.getvar('SERVER_URL',v_host);
-- Get the username/password and database from the .env file
tool_env.getvar('APPLICATION_USERNAME',v_username);
tool_env.getvar('APPLICATION_PASSWORD',v_password);
tool_env.getvar('APPLICATION_DATABASE',v_database);
-- If it is localhost then we are running on windows and need to use the windows port, otherwise we
-- are on AIX and need to use the AIX port
IF v_host = 'localhost' THEN
v_port := '8889';
ELSE
v_port := '8889';
END IF;
-- Now build the parameter string for running the report
v_parameter_string := 'server=repserver';
v_parameter_string := v_parameter_string||'&report= E:\AGE_NoELIGIBLEReport.rdf';
v_parameter_string := v_parameter_string||'&userid='||v_username||'/'||v_password||'@'||v_database;
v_parameter_string := v_parameter_string||'&execution_mode=batch';
v_parameter_string := v_parameter_string||'&comm_mode=synchronous';
v_parameter_string := v_parameter_string||'&destype=cache';
v_parameter_string := v_parameter_string||'&desformat=pdf';
-- Now run the report
web.show_document('http://'||v_host||':'||v_port||'/reports/rwservlet?'||v_parameter_string,'_blank');
END;
REP-110: Unable to open file ' AGE_NoELIGIBLEReport.rdf'.
REP-1070: Error while opening or saving a document.
REP-0110: Unable to open file ' AGE_NoELIGIBLEReport.rdf'.
but i hav report in e:\ then why its getting?Hi,
I suggest you not to use the "E:\" directory letter, but the REPORTS_PATH instead.
<p>
from the Online Help
</p>
<p>
On Windows, edit environment variables through the Registry Editor (Start > Run > Regedit).
</p>
<p>
On UNIX, edit environment variables by revising and running the shell script that defines the initial default values (reports.sh). If you do this, be sure to keep a backup of the original, unaltered reports.sh file.
</p>
<p>
Regards
JeanYves
</p> -
hi,
I am having problems in running report from form.
I am using oracle 9i on windows 2000 server and no 9iAS at the moment. On client side, i have windows xp and 9iDS installed. I want to run report from forms in 9iDS testing environment.
my forms are running ok but now i need to run report. so what i have done is that i have created a report object in form and following are enteries present in it at the moment.
Name REPORT7
FileName D:\Projects\IBMR\forms\soil_water_quality_data.rdf
Execution Mode Batch
Communication Mode Synchronous
Destination Type Cache
Report Server 9irep
and in when_button_pressed trigger
DECLARE
Report_Id REPORT_OBJECT;
Report_Job_Id VARCHAR2(20);
Report_Status VARCHAR2(80);
Report_Svr VARCHAR2(20);
BEGIN
Report_Id := FIND_REPORT_OBJECT('REPORT7');
Report_Svr := '9irep';
SET_REPORT_OBJECT_PROPERTY(Report_Id,REPORT_EXECUTION_MODE, BATCH);
SET_REPORT_OBJECT_PROPERTY(Report_Id,REPORT_FILENAME, '\projects\ibmr\forms\soil_water_quality_data.rdf');
SET_REPORT_OBJECT_PROPERTY(Report_Id,REPORT_COMM_MODE, SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(Report_Id,REPORT_DESFORMAT,'PDF');
SET_REPORT_OBJECT_PROPERTY(Report_Id,REPORT_OTHER, 'paramform=no');
Report_Job_Id := RUN_REPORT_OBJECT(Report_Id);
Report_Status := REPORT_OBJECT_STATUS(Report_Job_Id);
WHILE Report_Status IN ('RUNNING','OPENING_REPORT','ENQUEUED') LOOP
Report_Status := REPORT_OBJECT_STATUS(Report_Job_Id);
END LOOP;
IF Report_Status = 'FINISHED' then
WEB.SHOW_DOCUMENT('/reports/rwservlet/getjobid'||substr(Report_job_id,instr(Report_Job_Id,'_',-1)+1)||'?'||'server=9irep','_blank');
else
message ('report server failed with error message '||report_status);
END IF;
END;
i have installed report server with following command
rwserver -install 9irep
i have changed entry in rwservlet.properties like
SINGLESIGNON=NO and i have removed the following entire block of 9irep.conf, which i have read from some documentation
<!--security id="rwSec" class="oracle.reports.server.RWSecurity">
<property name="securityUserid" value="%PORTAL_DB_USERNAME%/%PORTAL_DB_PASSWORD%@%PORTAL_DB_TNSNAME%" confidential="yes" encrypted="no"/>
</security-->
i get the following error message when i run my form
frm-41214 Unable to run report
and then next message is
frm-41217 unable to get report job status
i debugged the report id and it is
9irep_0
returned by Report_Job_Id := RUN_REPORT_OBJECT(Report_Id);
When I checked the Report Queue Manager
it is showing status like
(9irep)Terminated with error
and detail it shows is
Unable to connect to the specified database.
Now I am wondering what to do next.
any suggestions???????Hello,
From your description, it seems like the report is faling due to a database authentication problem. When you run your report from Forms, Forms internally passes the its database connection information to Reports automatically. So ensure that you are connected to a valid database in Forms, before the report is called.
Please verify whether a simple report which does not require a database connection, for example, a report containing only a boilerplate text object, is running correctly. Also, in the trigger code that you have specified, you should add the following:
SET_REPORT_OBJECT_PROPERTY(Report_Id, REPORT_DESTYPE, CACHE);
so that the report output gets generated to the server cache, and can be retrieved using rwservlet/getjobid.
Thanks,
The Oracle Reports Team. -
Unable to open report from forms 9i
Hi,
Unable to open report from forms 9i and got the following error.
Error : REP-0503, You did not specify the name of a report
Steps followed
1.Created report object in forms using existing report
2.changed the following properties
Exec. mode : runtime
comm mode : synchronous
3. When -button -Pressed Trigger;
Declare
Repid report_object;
Begin
repid:=find_report_object('report4');
v_rep:=run_report_object(repid);
End;Hi,
did you specify a Reports rdf or rep file that should be run. You can do this either in a trigger or as a property of the Reports object node in Forms.
Frank -
When run report from form(6i) on the web,error FRM-921000
While I was trying to run report from form (6i)on the web,it will give me this error
message FRM-921000 and hang.
But when I try to call form using form,I do
not have the problem.
May I know ehat is the cause?
Anybody encounter this before?
Thanks
nullI am running Forms 6i on the web and attempting to call me report via RUN_REPORT_OBJECT. I am getting the same error as Jenny FRM-92100. I need to pass a parameter list so I don't think I can use WEB.SHOW_DOCUMENT. Any ideas???
Thanks,
Jenny N.
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Joseph Schwertner ([email protected]):
Dear Jenny,
I am running reports from Forms 6i on the WEB. I did not encounter your problem. Nevertheless I would like to share the following with you.
RUN_PRODUCT doesn't work for calling reports ON THE WEB. Instead using RUN_PRODUCT do the following:
1. Install Oracle Reports Server
2. For WEB calls of reports use WEB.SHOW_DOCUMENT
3. Learn how to pass parameters to the reports. It is a litlle bit strange, but it is explaint excellent in the documentation to the Reports Server.
I hope this will help you.
Joseph Schwertner
<HR></BLOCKQUOTE>
null -
Running reports from forms on the web
On forms and reports 6i we used the following code to run reports from forms.
We need to do the same on 9i forms and reports, we are running into problems.
Any help will be appreciated.
PROCEDURE web (inFileName VARCHAR2,
inRecordGroup RECORDGROUP) IS
outVirtualPath VARCHAR2(200) := '/forms90/f90servlet?p_url=/reports/rwservlet?'; outServer VARCHAR2(200) := 'server=rep_ora-app-4';
outReport VARCHAR2(200) := 'report='||inFileName;
outUserid VARCHAR2(200) :=
'userid='||GET_APPLICATION_PROPERTY(USERNAME)||'/'||GET_APPLICATION_PROPERTY(PAS
SWORD)||'@'||GET_APPLICATION_PROPERTY(CONNECT_STRING);
outDesType VARCHAR2(200) := 'DESTYPE=CACHE';
outDesFormat VARCHAR2(200) := 'DESFORMAT=PDF'; outUser VARCHAR2(2000);
outCount INTEGER;
error we are getting.
FRM-42017:Module name must be specified.S Hatch (guest) wrote:
: I'm thinking that you're going to have to install the Reports
: cartridge, create an entry in the keymap with any parameters
and
: call your report via the url.
: Dessislava Gantcheva (guest) wrote:
: : How do I call a report from a form on the web?
: : I have installed Windows NT Server 4.0 with SP 5, OAS4.0.7
EE
: : with patch 1, Developer 6.0 with patch 1. Developer server
and
: : forms server work fine in a non-cartridge implementation,
but
: I
: : cannot run a report within a form. I just have no any info
how
: : to do this.
I have entries in my keymap file and I can call my reports via
the url, but I cannot run a report WITHIN a form. I mean to call
a report by clicking on a button of a form on the web. The
RUN_PRODUCT built-in does not work (at leas it seems like this)
If any one has expiriense with it, please, give me a hint.
Thanks
null -
FRM-92101 error while running report from form
HI All,
I am getting the form error FRM-92101 while running report from form menu.My code is given below:
DECLARE
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status VARCHAR2(20);
BEGIN
repid := FIND_REPORT_OBJECT('REPORT47');
v_rep := RUN_REPORT_OBJECT(repid);
rep_status := REPORT_OBJECT_STATUS(v_rep);
WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
LOOP
rep_status := report_object_status(v_rep);
END LOOP;
IF rep_status = 'FINISHED' THEN
WEB.SHOW_DOCUMENT('http://192.168.0.21:8889/reports/rwservlet/getjobid'||
substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server=repserver90','_blank');
ELSE
message('Error when running report');
END IF;
Clear_message;
END;
Clear_message;
--Arifhi Arif
Please see this note on MOS/Metalink for some common causes of this error:
Known Causes of FRM-92101 Error In Forms [ID 604633.1]
thanks,
AMN -
I want to run report from FORM
I want to run report from FORM. The report will save in PDF format then OPEN automatically in PDF
Every PDF file should have a unique file name.
I am using Form 6i and Reports 6iDECLARE
vParamList PARAMLIST;
BEGIN
vParamList:=GET_PARAMETER_LIST('MyRep');
IF NOT ID_NULL(vParamList) THEN
DESTROY_PARAMETER_LIST(vParamList);
END IF;
vParamList:=CREATE_PARAMETER_LIST('MyRep');
SET_REPORT_OBJECT_PROPERTY('report_path\emp_rep_def',REPORT_DESFORMAT,'PDF');
RUN_PRODUCT(REPORTS,'report_path\emp_rep_def',ASYNCHRONOUS,RUNTIME,FILESYSTEM,vParamList,NULL);
END; -
OAS in Unix: URL not found when run report from Form???? please help
Hi,
We have succesfully install OAS with Form Server and Report Server in
Unix. We able to run Form and Report direct from browser. But we having
problem to run Report from direct Form within the browser. The message from
the browser was 'The requested URL was not found'. We use run_product to run
report from form. Below is the statement:-
Run_Product(REPORTS, 'A10001', SYNCHRONOUS, RUNTIME, FILESYSTEM, pl_id,
NULL);
Does anyone have an idea??
Thanks in advance.
nullplease check env. variables
1. FORMS60_MAPPING
2. FORMS60_OUTOUT
FORMS60_MAPPING should point to vartual directory on your forms webserver
FORMS60_OUTPUT should point to physical
directory path of vartual directory
FORMS60_MAPPING
regards
Darshan
[email protected]
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by leong([email protected]):
Hi,
We have succesfully install OAS with Form Server and Report Server in
Unix. We able to run Form and Report direct from browser. But we having
problem to run Report from direct Form within the browser. The message from
the browser was 'The requested URL was not found'. We use run_product to run
report from form. Below is the statement:-
Run_Product(REPORTS, 'A10001', SYNCHRONOUS, RUNTIME, FILESYSTEM, pl_id,
NULL);
Does anyone have an idea??
Thanks in advance.
<HR></BLOCKQUOTE>
null -
hi all,
I am working in oracle forms 6i and i am trying to run report from
form while press one of the push-button. works fine upto 2nd line from the
begin key-word.After that its showing error like " FRM-40738:Argument 1 to builtin
REPORT_OBJECT_STATUS cannot be null.". Can any-one help me of how to solve this and
wat would be the problem.........?
declare
run_rep varchar2(200);
rep_obj report_object;
rep_stat varchar2(20);
begin
rep_obj := find_report_object('report46');
run_rep := run_report_object(rep_obj);
rep_stat := report_object_status(run_rep);
if rep_stat = 'FINISHED' then
copy_report_object_output(run_rep, 'C:\Documents and Settings\trainee\Desktop\Icons\test.pdf');
else
message('error when running report');
end if;
end;
Please help asup!
regards,
jamehi rosario,
Thanks for ur reply. My requirement is, I want to generate pdf file from the report output. so i wrote the following code which is taken from d2k documentation. Problem area has been highlighted in bold.
declare
run_rep varchar2(200);
rep_obj report_object;
rep_stat varchar2(20);
begin
rep_obj := find_report_object('report46');
run_rep := run_report_object(rep_obj);
rep_stat := report_object_status(run_rep);
if rep_stat = 'FINISHED' then
copy_report_object_output(run_rep, 'C:\Documents and Settings\trainee\Desktop\Icons\test.pdf');
else
message('error when running report');
end if;
end;
Report is running but while coming to report_object_status. complior shows error like "FRM-40738:Argument 1 to builtin REPORT_OBJECT_STATUS cannot be null". Parameter for report_object_status is null, i dont know y it is null because report is running. If report is running means,then there must be some values in run_rep.
why complior doesnt find the values from run_rep.......???
regards,
jame
Maybe you are looking for
-
How do I rid a CS3 document of a "missing plug-in" when it is opened in CS4?
Before I upgraded to InDesign CS4, I used to have a plug-in for cross-references. When I open that particular document in CS4 (originally made in CS3) a window pops up with this "Missing Plug-ins" message: "Cross-References.pln; The document uses one
-
Help...clips not in viewer
I have been working on a training project for a while. Last night things seemed to be fine as they have been for the couple of months I have been doing this. Today when I open the project and events, the clips from certain events are not showing up i
-
I have a software program that uses a SQL 2012 Standard Database. The software program is reporting that a certain user is in the system that is not. That user is unable to log into the software program because the software is reporting him as usin
-
I'd like that my visitors could post comments on other pages than my blog & podcasts pages. Should it be possible by HTML ? Thanks in advance, Richard.
-
Facing problem in generation of Spool.
Hi all, Need your inputs in fixing the below problem. Same spool number is getting generated for all the background jobs,this problem is occuring from yesterday only after transporting few Smartforms to Production. These smartform outputs also comes