Unable to Run T-CODE UCMON after Upgrade

Hi Gurus,
We have upgraded our BW 3.5 and SEM-BW component to BI7 with EPH1,this has ugrade the SEM-BW component from 4 to 6.After the upgrade we are unable to run T-code UCMON and it gives a short dump. We also found that this T-code is missing UGMD_SY_MD. Please suggest.
your valuable inputs are appreciated.
Many thanks,
Balaji

Snote 644610,Note 568784
Sorry for not replyin sooner was on my vacation, when we did our upgrade our BCS component was missing, so my hosting team told me that their FIN-BASIS update was thru these notes

Similar Messages

Unable to get the login page after upgrade from 11.5.10.2 to R12

Hi ,
We are unable to get the login page after upgrade from 11.5.10.2 to R12, all the services are up and running.
Pls let me know if someone has come across this issue.
Thanks&Regards,
Apps DBA

Hi ,
After compile JSP files manually , now we are facing problem after logging.
Error : You have encountered an unexpected error.
Thanks&Regards,
Apps DBA

SAP B1 APPLICATION IS RUNNING SLOW IN SERVER AFTER UPGRADE

Hi,
The sap application is running slow in server after upgrading it from 9.0 to 9.1 it's taking 5-10 secs to open a document after clicking it and its taking more time in client system.
what are the steps to be taken so that the application will run without any delay.
Regards,
Karthik B

hi please check bellow thread ,it may help you
Client Machines Logon to SAP Server is Very Slow
update the status
regards
AKR

I unable to see my network messages after upgrading to ios6 on my iphone4,can anyone help me for this issue?

I unable to see my network messages after upgrading to ios6 on my iphone4,can anyone help me for this issue?

Try to perform SMC and PRAM resets:
http://support.apple.com/kb/HT3964
http://support.apple.com/kb/ht1379
Then try a safe boot:
http://support.apple.com/kb/HT1564
Ciao.

Unable to charge iphone 3G Battery after upgrade to OS4.1

Hi ,
I 'm unable to charge my iphone 3G after upgrade to os 4.1 , also i noticed that the network signal to weaker after the upgrade .
any idea how to fix this or how to downgrade my iphone back to the previous version.
Regards
Hussein

No, not yet - thought that there may be another solution than a reset with a consecutive restore. But if his is the only possible solution I will try...

How to updgrade to lion os 10.7 from leopard 10.6.8 using mac app store? unable to load redemption code to trigger upgrade

how to updgrade to lion os 10.7 from leopard 10.6.8 using mac app store? unable to load redemption code to trigger upgrade.

Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support: Contacting Apple for support and service - this includes
international calling numbers..
For Mac App Store: Apple - Support - Mac App Store.
For iTunes: Apple - Support - iTunes.

Unable to log into the portal-After Upgrade from NetWeaver 7.0 to 7.3EHP1

Dear Experts,
We have poltal landscape(NW 7.0 Dualstack SPS27) with our customozed themes and par files(Company name,logos and colours)
Recently we upgraded the one of portal from NW 7.0 to NW 7.3EHP1 . Upgrade has been successfilly completed with small issue.
After upgrade all urls are working(/nwa, /sld) except /irj/portal.We know that NW 7.3 EHp1 accepts only ear file i.e we converted the our customized log on par file to ear file through par migration tool and the same was deployed successfully through NWDS 7.3 version.After deploying we are able to access the
/irj/portal url with our customized par(means ear file) without issues,
We are unable to log into the portal after giving the correct user id and password,getting the portal runtime error as foloows.
Portal runtime error
An exception occured while processing your request.Send the exception ID your administrator
Exception id:
see log files for details about this exception
Default.trc log file(/server0/log)
#EP-PIN-PRT#tc~epbc~prtc~api#C00061FD2733006C00000005000056CB#9034950000000004#sap.com/com.sap.portal.runtime.system.hooks#com.sap.portal.prt.
runtime#J2EE_ADMIN#4##43E00B85A79911E380F800000089DCC6#3a483a0fa79911e3903000000089dcc6#3a483a0fa79911e3903000000089dcc6#0#Thread[HTTP Worker
[@900472845],5,Dedicated_Application_Thread]#Plain##
08:14_09/03/14_0005_9034950
[EXCEPTION]
java.lang.RuntimeException: Could not create Resource Repository root folder in PCD
at com.sap.portal.resource.repository.ResourceRepositorySrv.initRepositoryRootContext(ResourceRepositorySrv.java:140)
at com.sap.portal.resource.repository.ResourceRepositorySrv.init(ResourceRepositorySrv.java:93)
at com.sap.portal.prt.core.RequestDispatcherFactory$ServiceRequestDispatcher$3.service(RequestDispatcherFactory.java:518)
at com.sap.engine.services.servlets_jsp.server.deploy.impl.module.IRequestDispatcherImpl.dispatch(IRequestDispatcherImpl.java:363)
at com.sap.portal.prt.core.RequestDispatcherFactory$ServiceRequestDispatcher.init(RequestDispatcherFactory.java:503)
at com.sap.portal.prt.broker.PortalServiceItem.initServiceInstance(PortalServiceItem.java:347)
at com.sap.portal.prt.broker.PortalServiceItem.getServiceInstance(PortalServiceItem.java:210)
at com.sap.portal.prt.broker.PortalServiceItem.load(PortalServiceItem.java:578)
at com.sap.portal.prt.om.ObjectsManager.createObejctHandle(ObjectsManager.java:234)
at com.sap.portal.prt.om.ObjectsManager.getObjectHandle(ObjectsManager.java:147)
at com.sap.portal.prt.broker.PortalAppBroker.getPortalService(PortalAppBroker.java:498)
at com.sap.portal.prt.service.ServiceManager.getPortalServiceItem(ServiceManager.java:431)
at com.sap.portal.prt.service.ServiceManager.get(ServiceManager.java:220)
at com.sap.portal.prt.runtime.Portal$RuntimeResources.getService(Portal.java:130)
at com.sap.portal.resource.repository.WebResourceRepositorySrv.init(WebResourceRepositorySrv.java:71)
at com.sap.portal.prt.core.RequestDispatcherFactory$ServiceRequestDispatcher$3.service(RequestDispatcherFactory.java:518)
at com.sap.engine.services.servlets_jsp.server.deploy.impl.module.IRequestDispatcherImpl.dispatch(IRequestDispatcherImpl.java:363)
at com.sap.portal.prt.core.RequestDispatcherFactory$ServiceRequestDispatcher.init(RequestDispatcherFactory.java:503)
at com.sap.portal.prt.broker.PortalServiceItem.initServiceInstance(PortalServiceItem.java:347)
at com.sap.engine.services.servlets_jsp.server.deploy.impl.module.IRequestDispatcherImpl.dispatch(IRequestDispatcherImpl.java:363)
at com.sap.portal.prt.core.RequestDispatcherFactory$ServiceRequestDispatcher.init(RequestDispatcherFactory.java:503)
at com.sap.portal.prt.broker.PortalServiceItem.initServiceInstance(PortalServiceItem.java:347)
        at com.sap.portal.prt.broker.PortalServiceItem.getServiceInstance(PortalServiceItem.java:210)
        at com.sap.portal.prt.broker.PortalServiceItem.load(PortalServiceItem.java:578)
        at com.sap.portal.prt.om.ObjectsManager.createObejctHandle(ObjectsManager.java:234)
        at com.sap.portal.prt.om.ObjectsManager.getObjectHandle(ObjectsManager.java:147)
        at com.sap.portal.prt.broker.PortalAppBroker.getPortalService(PortalAppBroker.java:498)
        at com.sap.portal.prt.service.ServiceManager.getPortalServiceItem(ServiceManager.java:431)
        at com.sap.portal.prt.service.ServiceManager.get(ServiceManager.java:220)
        at com.sap.portal.prt.runtime.Portal$RuntimeResources.getService(Portal.java:130)
        at com.sap.portal.resource.repository.WebResourceImportService$ResourceImporter.<init>(WebResourceImportService.java:248)
        at com.sap.portal.resource.repository.WebResourceImportService.importApplicationResources(WebResourceImportService.java:172)
        at com.sapportals.portal.navigation.NavigationMimeRepositoryService.loadAllPicsToWRR(NavigationMimeRepositoryService.java:186)
        at com.sapportals.portal.navigation.NavigationMimeRepositoryService.init(NavigationMimeRepositoryService.java:160)
        at com.sap.portal.prt.core.RequestDispatcherFactory$ServiceRequestDispatcher$3.service(RequestDispatcherFactory.java:518)
        at com.sap.engine.services.servlets_jsp.server.deploy.impl.module.IRequestDispatcherImpl.dispatch(IRequestDispatcherImpl.java:363)
        at com.sap.portal.prt.core.RequestDispatcherFactory$ServiceRequestDispatcher.init(RequestDispatcherFactory.java:503)
        at com.sap.portal.prt.broker.PortalServiceItem.initServiceInstance(PortalServiceItem.java:347)
        at com.sap.portal.prt.broker.PortalServiceItem.getServiceInstance(PortalServiceItem.java:210)
        at com.sap.portal.prt.broker.PortalServiceItem.load(PortalServiceItem.java:578)
        at com.sap.portal.prt.om.ObjectsManager.createObejctHandle(ObjectsManager.java:234)
        at com.sap.portal.prt.om.ObjectsManager.getObjectHandle(ObjectsManager.java:147)
        at com.sap.portal.prt.broker.PortalAppBroker.getPortalService(PortalAppBroker.java:498)
        at com.sap.portal.prt.service.ServiceManager.getPortalServiceItem(ServiceManager.java:431)
        at com.sap.portal.prt.service.ServiceManager.get(ServiceManager.java:220)
at com.sap.portal.prt.runtime.Portal$RuntimeResources.getService(Portal.java:130)
        at com.sap.portal.pcm.iview.admin.PcmIviewCommon.getAdditionalAttributes(PcmIviewCommon.java:358)
        at com.sap.portal.pcm.iview.admin.PcmIviewCommon.initLayers(PcmIviewCommon.java:173)
        at com.sap.portal.pcm.iview.admin.AdminBaseiView.createAttrSetLayersList(AdminBaseiView.java:177)
        at com.sap.portal.pcm.page.admin.AdminBasePage.getCustomImplementation(AdminBasePage.java:76)
        at com.sap.portal.pcm.admin.PcmAdminBase.getImplementation(PcmAdminBase.java:642)
        at com.sapportals.portal.navigation.LightningHelperService.getFrameworkPageAttributesValues(LightningHelperService.java:143)
        at com.sapportals.portal.navigation.LightningHelperService.getFrameworkPageAttributesValues(LightningHelperService.java:171)
        at com.sapportals.portal.navigation.fpm.util.PhaseConfiguration.prepareAttributes(PhaseConfiguration.java:71)
        at com.sapportals.portal.navigation.fpm.util.PhaseConfiguration.storeRelatedAttributesInSharedStorage(PhaseConfiguration.java:35)
        at com.sapportals.portal.navigation.fpm.NavigationFpmListener.doFrameworkPhase(NavigationFpmListener.java:535)
        at com.sapportals.portal.navigation.fpm.NavigationFpmListener.doPhase(NavigationFpmListener.java:122)
        at com.sapportals.portal.pb.fpm.FPMContainer.distributeEvent(FPMContainer.java:63)
        at com.sapportals.portal.pb.fpm.FPM.doDocumentHook(FPM.java:179)
        at com.sapportals.portal.prt.service.document.DocumentHookMulticaster.doDocumentHook(DocumentHookMulticaster.java:100)
        at com.sapportals.portal.prt.service.document.DocumentHookService.doDocumentHook(DocumentHookService.java:119)
        at com.sapportals.portal.prt.service.document.DocumentHookServiceNew.doDocumentHook(DocumentHookServiceNew.java:186)
        at com.sapportals.portal.prt.connection.PortalHook.doDocumentHook(PortalHook.java:665)
        at com.sap.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:183)
        at com.sap.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:107)
        at com.sap.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:141)
        at com.sap.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:206)
        at com.sapportals.portal.navigation.PortalLauncher.doContent(PortalLauncher.java:116)
        at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:213)
        at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:129)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
        at com.sap.engine.services.httpserver.filters.MemoryStatisticFilter.process(MemoryStatisticFilter.java:57)
        at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
        at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
        at com.sap.engine.services.httpserver.filters.DSRHttpFilter.process(DSRHttpFilter.java:43)
        at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
        at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
        at com.sap.engine.services.httpserver.server.Processor.chainedRequest(Processor.java:475)
        at com.sap.engine.services.httpserver.server.Processor$FCAProcessorThread.process(Processor.java:269)
        at com.sap.engine.services.httpserver.server.rcm.RequestProcessorThread.run(RequestProcessorThread.java:56)
        at com.sap.engine.core.thread.execution.Executable.run(Executable.java:122)
        at com.sap.engine.core.thread.execution.Executable.run(Executable.java:101)
        at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:328)
Caused by: javax.naming.InvalidNameException: Character not allowed: ':' in 'pcd:resource_repository'
at com.sapportals.portal.pcd.pl.PcdName.checkComponent(PcdName.java:64)
        at com.sapportals.portal.pcd.pl.PcdName.checkNameComponent(PcdName.java:39)
        at com.sapportals.portal.pcd.pl.PcdName.padd(PcdName.java:636)
        at com.sapportals.portal.pcd.pl.PcdName.add(PcdName.java:626)
        at com.sapportals.portal.pcd.gl.util.StringUtils.tokenizeIntoPcdName(StringUtils.java:112)
        at com.sapportals.portal.pcd.pl.PcdName.appendUrlInternal(PcdName.java:408)
        at com.sapportals.portal.pcd.pl.PcdName.<init>(PcdName.java:245)
        at com.sap.portal.resource.repository.ResourceRepositorySrv.initRepositoryRootContext(ResourceRepositorySrv.java:121)
        ... 132 more
1)We are suspecting this issue is related to the theme issue.How to update the theme in the upgraded portal(have a backup of themes)
2)Want to know if we update a theme where it stored at the operating system level(in NW 7.3 EHP1 as well as NW 7.0)
3)Is there any post steps after portal upgrade.
Request you suggest.
Regards
Maruthi

Hi
Refer the SAP Notes
1942399 - Fix usage of unregistered class loader while processing HTTP request in an application being updated or stopped at the same time
1744820 - Migration 7.3 fails while executing migration of pcd_upgrade
1703578 - WPC migration stops during connection creation
1918086 - ERROR: Unable to get iView
Regards
Ram

System exception code 0xc0000005 after upgrading to LabVIEW 8.2

After upgrading to LabVIEW 8.2 from LabVIEW 8.0 I am continously getting a system reboot on my PXI (8187) when attempting to run my real time loops which worked fine with LabVIEW 8.0. The loops seem to start, and within less than a 30 seconds the system reboots. Upon reboot a message is displayed reboot due to system error. After running and getting this error again the system reboots into safe mode. Looking at the nirtlog file on the PXI, there is system crash log which list the exception code as 0xC0000005 and a listing of loaded dlls.
Does anyone have any idea what may be leading to this?
Thanks,
Kevin

The following is a simple example that produces the exception and reboots the PXI. This VI was originally created on a machine with LabVIEW version 8.0 and run on a PXI-8187 w/ RealTime version 8 and it ran without issue. I then took the VI to a machine running LabVIEW 8.2, I opened the VI, which compiled it to version 8.2, and ran it on another PXI-8187 w/ RealTime version 8.2 and I got a system exception and the PXI rebooted. If I run the two loops at the same priority level, it seems to run without issue. Also if I run with the loops at different priority levels and place a check in the Discard Missed Periods and in the Maintain Original Phase of the lower priority loop, it seems to run fine as well. However if I uncheck either the Discard Missed Periods or the Maintain Original Phase (as is set in the attached VI) the exception will occur. Any thoughts on what is going on, am I doing something wrong?
Thanks,
Kevin
Attachments:
TestLoop.vi ‏155 KB

Unable to update apps on 4s after upgrading to iOS 8.1

Hi,
I am unable to update apps on 4s app store after upgrading to iOS 8.1. signed in on app store & icloud still app upgrading will show circle running but wouldn't start upgrading. location service OFF, tried after changing to location service ON but still won't upgrade. what should be the issue? any correct way to update apps. I have been using for long, never had issue with app store on previous iOS migrations. anyone here can help please.

Hi there Sam R 12,
You may want to try force closing all open apps and resetting the device as an initial troubleshooting step. Take a look at the articles below for more information.
iOS: Force an app to close
Turn your iOS device off and on (restart) and reset
-Griff W.

Problem running BI template installer after upgrade to 2004s

Hello,
After upgrading our Portal from EP6 to EP7 I have a problem running the BI template installer. The failure occures right at the beginning. The installer is looking for SLD related parameters in the 'CTC> Propertysheet SystemProperties'.
But there are only three parameters in the sheet :
HOST, SYSTEM_ID, INSTANCE_ID.
If you instal a new 2004s system you see much more entries in the 'Propertysheet SystemProperties'.
My question is how to add these missing entries into the 'Propertysheet SystemProperties'.
Thanks
Boaz

Hi Kaylan,
Actually there are only two things to manually fix after the CTC template run, which is mentioned in the Blog:
- check/correct the following settings in the NetWeaver Administrator for evaluate_assertion_ticket and ticket according SAP Note 945055
- the entry in table RSPOR_T_PORTAL for Platform and PDF fonts
If you uncertain, you can remove the created objects as stated in the Document http://scn.sap.com/docs/DOC-11607 => Page18 in the Notes Section. the CTC template is creating these objects and entries again.
Best Regards Roland

2011 i5 MacBook Air unable to sleep with lid open after upgrading to 10.7.1

Hi,
After upgrading to 10.7.1 I noticed my 2011 i5 MacBook Air being unresponsive to wake events. Per instructions I saw from other posts I pointed the Startup Disk to my main partition. Shortly after (though I'm sure unrelated to Startup Disk) the Energy Saver preferences I noticed were no longer being adhered to. I can make my machine sleep through
1. Apple -> Sleep optoin
2. Closing the lid
However, when the lid is up the Energy Saver options are not being adhered to. I have tried
1) Resetting PRAM
2) Resetting SMC
3) Removing SystemConfiguration folder
4) Turning off auto update on all apps running
5) Poring through system logs
Interestingly enough, I looked through all system logs via Console and noticed during the time period in which sleep should be triggered NO EVENTS were being written to the system logs.
Currently I am using the PleaseSleep app to get my computer to sleep properly. Please advise!
- Frank
P.S. I did do one thing was put a refridgerator magnet to the computer to "simulate" sleep but I doubt it would cause this broken behavior.

Uninstall Growl. See:
Uninstalling Software: The Basics
Most OS X applications are completely self-contained "packages" that can be uninstalled by simply dragging the application to the Trash. Applications may create preference files that are stored in the /Home/Library/Preferences/ folder. Although they do nothing once you delete the associated application, they do take up some disk space. If you want you can look for them in the above location and delete them, too.
Some applications may install an uninstaller program that can be used to remove the application. In some cases the uninstaller may be part of the application's installer, and is invoked by clicking on a Customize button that will appear during the install process.
Some applications may install components in the /Home/Library/Applications Support/ folder. You can also check there to see if the application has created a folder. You can also delete the folder that's in the Applications Support folder. Again, they don't do anything but take up disk space once the application is trashed.
Some applications may install a startupitem or a Log In item. Startupitems are usually installed in the /Library/StartupItems/ folder and less often in the /Home/Library/StartupItems/ folder. Log In Items are set in the Accounts preferences. Open System Preferences, click on the Accounts icon, then click on the LogIn Items tab. Locate the item in the list for the application you want to remove and click on the "-" button to delete it from the list.
Some software use startup daemons or agents that are a new feature of the OS. Look for them in /Library/LaunchAgents/ and /Library/LaunchDaemons/ or in /Home/Library/LaunchAgents/.
If an application installs any other files the best way to track them down is to do a Finder search using the application name or the developer name as the search term. Unfortunately Spotlight will not look in certain folders by default. You can modify Spotlight's behavior or use a third-party search utility, Easy Find, instead. Download Easy Find at VersionTracker or MacUpdate.
Some applications install a receipt in the /Library/Receipts/ folder. Usually with the same name as the program or the developer. The item generally has a ".pkg" extension. Be sure you also delete this item as some programs use it to determine if it's already installed.
There are many utilities that can uninstall applications. Here is a selection:
AppZapper
Automaton
Hazel
CleanApp
Yank
SuperPop
Uninstaller
Spring Cleaning
Look for them at VersionTracker or MacUpdate.
For more information visit The XLab FAQs and read the FAQ on removing software.

Server admin is unable to login to server.app after upgrade to Mountain Lion Server?

After upgrade to Mountain Lion Server I am unable to login to the server tools. When I input the admin user name and password the dialog box just shakes indicating the wrong password. But it is the correct password. How do I reset the password or if necessary how do I rest the server and start over on Mountain Lion. I found info on how to reset the server on previous versions of the server which involved executing a plist in the LaunchDaemon folder. However that file does not exist on the server following upgrade to Mountain Lion.
Thanks, Howard

I upgraded today and had the same issue. I took following steps to fix my computer.
Boot into Recovery Partition (Hold Option Button while booting)
Open Terminal.
Type resetpassword
Select your hard drive
Select the user account (Administrator)
Enter a new password for the user
Reenter password
Save
Restart
Boot normally, Login as Adminstrator with the new password and add "Admin" permission to your account.
Restart
Everything should be working as expected

Unable to update item master data after upgrade

Greetings,
I have just upgraded from 2005A SP01 PL22 to 8.81 PL05.
After the upgrade, I am unable to update any field in the item master data.
Error message:
In "Warehouses - Setup" window, on "Accounting" tab, choose sales-type revenue account , '_SYS00000001165' [Message 131-52]
I have checked all the warehouses accounting tab and all the revenue account is a sales type account. I have also checked the GL for _SYS00000001165 and it is a COGS GL. After I change its type to "Sales", I am able to update. This shouldn't be the case.
I have also tested creating and update new item master and I have no problem. However, I will have the same problem if i add a new item via duplicating from an old item.
Any advice?
Thank you.

Hi,
Can you also check whether the Item which you are trying to update has Manage G\L Account by as Item, Item group or Warehouse?
If you have checked for the Warehouses, check for the Item Group and at the G\L Determination > Inventory tab as well.
Kind Regards,
Jitin
SAP Business One Forum Team

Unable to connect to app store after upgrading to ios5.1??

Have tried everything restoring, resetting, formatting!!! Rest all network related apps like safari and fb are doing fine.Only the featured page is opening in app store.top 25 n search are not!! I can connect using mobile data connections but am unable to open anything through wifi... feel like kicking myself for upgrading to ios5.1.

Thx very much....but I could open the website and the itunes store....
After I tried typing following orders in Commonds, the problem solved:
rm ~/library/preferences/com.apple.appstore.plist
rm ~/library/preferences/com.apple.storeagent.plist
rm -rf ~/library/preferences/byhost/*
hope can hlep others

My browser's are 'unable to connect' to some websites after upgrading to mavericks.

the message i get is:
Unable to connect
Firefox can't establish a connection to the server at www.adobe.com.
    The site could be temporarily unavailable or too busy. Try again in a few moments.
    If you are unable to load any pages, check your computer's network connection.
    If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web.
this is happening on reliable sites such as www.adobe.com, however, there are other sites that also won't load such as (http://www.adobe.com/products/reader.html), and though it seems specific to adobe. i had a friend try going to the adobe site on a different machine running osx 10.6 and they could load the page fine. i tried firefox and safari and neither will load the page.
i'm running:
os x 10.9.2
processor- 3.06 GHz Intel Core 2 Duo
memory- 8 GB 1067 MHz DDR3
thanks,
rick

You, or someone using your computer, may have hacked the system to redirect queries to certain servers. The file modified is /etc/hosts.
The easiest way to fix the hosts file is to restore it from a backup that predates the modification, or to copy the unmodified file from another Mac. If you can't do that, then do as below.
Back up all data.
If you have more than one user account, you must be logged in as an administrator.
Triple-click anywhere in the line below on this page to select it:
open -e /etc/hosts
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting. A TextEdit window should open. At the top of the window, you should see this:
# Host Database
# localhost is used to configure the loopback interface
# when the system is booting. Do not change this entry.
127.0.0.1                              localhost
255.255.255.255          broadcasthost
::1                                        localhost
fe80::1%lo0                    localhost
Below that, you'll see some other lines. There should be nothing above the first line "##". If you have any doubt about that, STOP and ask for guidance. Make sure you scroll all the way to the bottom. Scroll bars are hidden by default until you actually start scrolling, so you may not realize that you’re not seeing the whole document.
If the contents of the TextEdit window are as described, close it, then enter the following command in the Terminal window in the same way as before (by copy and paste):
sudo sed -i~ '11,$d' /etc/hosts
This time, you'll be prompted for your login password, which won't be displayed when you type it. If you don’t have a login password, you’ll need to set one before you can run the command. You may get a one-time warning to be careful. Confirm. Quit Terminal.
If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. Log in as one and start over.
That will fix the hosts file. There is now a copy of the old hosts file with the name "hosts~" in the same folder as "hosts". You can delete the copy if you wish. Don't delete the file named "hosts".

Unable to Run T-CODE UCMON after Upgrade

Similar Messages

Maybe you are looking for