Unable to ./runInstaller in v100- Please Help
Hello,
I have read previous discussions on this, so I checked pretty much all listed possibilities:
1- My cdrom is mounted beacuse Volume Mgr is running. Here is the output of ls command:
cd /cdrom
ls -ltotal 6
dr-xr-xr-x 2 root sys 2048 Jan 21 12:43 030121_1243
lrwxrwxrwx 1 root nobody 13 Mar 24 13:54 cdrom0 -> ./030121_1243
2- I tried the following:
/cdrom/cdrom0/runInstallerksh: /cdrom/cdrom0/runInstaller: not found
/cdrom/030121_1243/runInstallerksh: /cdrom/030121_1243/runInstaller: not found
3- I set the DISPLAY variable to my_ipddress:0.0
DISPLAY=my_ipaddress:0.0
export DISPLAY
echo $DISPLAYmy_ipaddress:0.0
What else could be wrong here??? I will appreciate any help!
Thanks
Ameen
Ameeni,
Do I take it you are trying to install Oracle???
If not - I know this is obvious - check the name of the file doesn't include an extension, i.e. runInstaller.sh.
I had similar problems, but different errors and found it best to copy all of the CDs onto the disk under a single directory as Disk1, Disk2, and Disk3, su to the Oracle account, and then do Disk1/runInstaller from the high level directory.
Check you have enough swap space and and a tmp directory with LOTS of space, and then set the environment variables. Also the kernel parameters are important. I think the tmp directory gave me an error message similar to yours, in that the installer code is copied into it.
Finally, you need to get the magic cookie for the connection set up for X using "xauth". This was a real pain. I did write up the install problems for our own DBAs for this, so if you still have a problem put a message here and I will add it.
Similar Messages
-
HT1918 I am trying to edit my billing information and am unable to do so. Please help!
I need to edit billing information and am unable to do so. Please help! Thank you!
on ios device go to settings - itunes app stores - click on your apple id - select view apple id- and then enter password. - your billing info is in the account window.
on computer open itunes - go to itunes store - either sign in - or click apple id - view apple id - enter password - billing info under account window -
Was wondering why the private browsing button no longer appears after downloading ios 7? I need to turn it off and am unable to do so. Please help.
Tap on the Pages icon at the bottom right (two squares). There you have the Private button.
-
Protocol layer was unable to send a message - PLEASE HELP !!!!
I have the Z10 and I am unale to reply to, or forward any e-mails that I receive on my corporate e-mail address.
I can create and send new e-mails and I am receiving all my e-mails, but I can not forward or reply which is a basic requirement.
Every time I try I get a message advising that
"Protocol layer was unable to send a message"
Please HELP!!!!!
Antony.....Hi and Welcome to the Community!
There are several public KB articles that deal with that error, depending on your exact circumstances. I suggest you go here:
http://btsc.webapps.blackberry.com/btsc/microsites/microsite.do
Search on your exact error message, then inspect the articles that result from the search to see which apply to your specific situation.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
I am using the iphone 3gs and uptaded to ios 6.1.3 but my phone was unable to activate why ? please help.
What is the exact wording of the error message you received?
Is there a sim in the iPhone?
Is the iPhone jailbroken or modified to work with other than the original
wireless provider?
Have any of the beta versions of iOS 7 been installed on the iPhone?
Need more information before someone can offer a solution. -
HT1386 Trying to Sync - Unable to load data class - please help
I just cleared my I-Pod Touch to put new music on it and my computer is prompting the following. "I-Tunes was unable to load data class information from sync sevices." Reconnect of try again later. Another prompt that keeps appearing is "the application apple mobile device help quit unexpectedly." Please help me...
Apple Mobile Device Restart. Disable all security software ex. Firewalls and Antivirus. Follow article http://support.apple.com/kb/TS1567 . The above listed article is correct by lllaass. I resolve it by unchecking the different categories in itunes sync pages... Plug in device, click on name on left side of itunes, Click on different sync pages like summary, info, music, movies, etc. You need to uncheck the main check box to sync content. An example would be unchecking "Sync Music" . You will then need to sync once for each category until you locate the source of your corrupt files or folders. Syncing without it checked removes content from device. Follow this step even if there is nothing on the device. Once you identify if it is picture or music etc. you will need to delete corrupt files or move them somewhere else on the computer so itunes can't find it anymore.
-
Hi I m unable to upgrade ios5.1.1.. Please help when I click on install now and agree to t&c.. It say verifying updates and then it says unable to upgrade.. Please help
Read Here > https://discussions.apple.com/message/18449560#18449560
-
I have iPhone 3GS with OS4.2. To, I try to upgrade it with ituon 6.1.1. After upgrade I unable activate my iPhone. Then I try to restore back, but after restore, I still unable to activate my phone. I with T- mobile, but they told me to call Apple. Please help!
Your iPhone was hacked/jailbroken in order to unlock to to work with T-Mobile. When you updated it you broke the hack and the iPhone is now locked again to the original cell provider, most likely AT&T.
You can see about unlocking it with AT&T by using this form, if you qualify: https://www.att.com/deviceunlock/client/en_US/termsAndCondition
After unlocking you will need to use Google and learn the procedure to clear the unlock hack and Restore it. -
I achieved an e-mail by mistake, now I am unable to find it. Please help
I have achieved an incoming e-mail by mistake, now I don't know where to look for it or how to retrieve it. Please help.
The answer probably depends on your webmail site (e.g., Yahoo, Gmail, Windows Live/Hotmail) or email program (e.g., Thunderbird). Can you mention which one you're using?
-
HT1414 unable to activate my iphone, please help
I have restored my iphone 3gs back to factory settings, when i try to reactivate it keeps saying it cant due to activation server not working, when i attach to itunes it keeps saying no sim inserted, please help??
Thank you, I didnt know that. Anyway, do you have any idea how much will it cost in India to unlock iphone 5 from T-Mobile UK?
You have more chances of getting struck by lightning on a clear blue sunny day than T-Mobile in UK unlocking your iPhone in India especially as it was hacked -
HT1212 I have forgotten restrictions password and unable to reset ipad. Please help
I Think my daughters played with this feature and created a password that I don't knw. I backed up all pics and videos hoping to be able to reset the lock out. But I need the password to reset! How to reset my ipad so I can use it to full capacity? Please help!
Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
Forgotten Restrictions Passcode Help
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
Also, see iTunes- Restoring iOS software. -
Unable to Capture Footage! Please Help.
Hey guys,
I am having trouble getting Final Cut Pro to recognize the camera I am trying to capture off of. Does anyone know what the problem might be? Here are all my stats:
Final Cut 5
Camera: Sony DCR-VX2000
Connection: Firewire
Sequence Preset: DV NTSC 48 kHz Anamorphic
Capture Preset: DV NTSC 48 kHz Anamorphic
Device Control Preset: Firewire NTSC Basic
When I open Log and Capture I get this message: "Unable to initialize video deck. You may still log offline clips or use Capture Now."
Any advice you could offer me would be greatly appreciated.Please give your full system specifications, what computer, what drives, how everything's connected, what settings are on the media, what settings you're using in Final Cut, and finally what version of the software, of the OS, and of QuickTime you are using.
Do not us FireWire Basic. That's for Canon cameras. -
Start up script fails; Unable to boot...Please, Help.
This is my first major problem that I have had with this computer. It has been running fine until this past Sunday night. I was running AOL, Firefox & iTunes. The computer was running slow and iTunes was skipping frequently. I rebooted and resumed my activities only to have the same problems and the computer booted slower than usual. I closed all my applications and rebooted once again. Then, I ran Disk Utility had used Verify Disk. It found an error on my system volume stating an incorrect block count in one sector and referenced a file cache_003, all other volumes passed. Disk Utility was unable to repair the volume. Repair Disk ran slow. I did a search for the file cache_003 and discovered that it was part of a Netscape profile back up on a different partition. I deleted the profile and used Disk Utility again. This time, the system volume passed and a different volume failed due to incorrect block size, Repair Disk failed. The next time I tried to boot the computer the gray screen with apple and loading indicator came up and stayed for several minutes followed by a blue screen with loading indicator for several minutes and stayed blue for nearly 40 minutes. Eventually, the screen went black and displayed that the start up script failed. Here is some of what was displayed.
Darwin/BSD(Computer Name-Computer.local)(console)
System Starter[35]
login date&time Internet Sharing[96]:Libinfo[Socket_open():2318]connect():2318]connect:()connection refused (This line repeated continuously)
I am able to input commands at this stage but I am not knowledgeable enough to know what to do.
When I push the power button to turn it off the computer beeps once and the led light flashes three times and turns off.
Each time when I attempt to boot either into Safe Mode or from the Software Install DVD I encounter the same problem.
Now, Monday night by chance on another boot attempt the computer started up although it took about 20-30 minutes. It was missing one volume which showed up in Disk Utility under a different name. While I had the computer up I backed up what I could on the volumes that mounted. One file I was unable to burn using Toast 9 due to a data fork error. The computer eventually froze during my activities and since I have had no luck at my start up attempts and have had the same problem. Luckily, I was able to back up everything I needed with the exception of what was on the AWOL volume.
The last thing I had installed recently was the latest Security Update which went fine and was two days before the trouble started.
I am at a loss for what to do next. I would like to retrieve the files on that one volume but at this point if I can start up I would just like to reformat and install the OS.
Any help with this problem would be much appreciated. Thank you.Well, originally when I ran Disk Utility, although it performed slower than usaual it found the error as previously mentioned and was unable to Repair Volume. As to using the Hardware Disc & Install Discs(original & Tiger) the computer failed to boot although you could hear the disc spinnning for awhile. In both and every instance regardless of any or no disc, the computer starts the boot process and you see the gray screen with white apple and loading indicator for about 3 minutes then it switches to the blue screen with loading indicator. After quite some time the loading indicator goes away and it's just a blue screen for nearly a half-hour followed by a black screen which starts the above prompt. I can post all of what that said later as I have written all of it down at home, a portion of it is in my original post. The start up chime doesn't sound at all. I do get a tone and flashing LED lights when I hold the power button down to turn it off after the above described boot process. There is not much I can do except try and try again. I may need to get a new hard drive but I would like to resolve it without doing so if possible. When trying to boot from both discs I was holding down the C key as directed and I have tried just letting the computer boot with disc in drive without any key interaction.
-
'Unable to open project File' Please help....
Help. Since yesterday, Final Cut Pro has been crashing every time I have tried to render something. I have used the FSC Maintenance Pack that has been recommended and ran Crash Analyser and Corrupt Clip Finder. No corrupt clips were found and the Crash Analyser fixed the problem for a while and I was able to work for a couple of hours. (prior to this I also removed some Motion files and that also temporarily stopped the crashing). I began working on my project again today, and the same thing started to happen. I kept having to turn everything off at the source until finally I gave up! Just before I turned it off I started running Autosave Cleaner but it seemed to freeze too so I Force Quit it. I have just turned it all back on again and to my horror, my project is not even opening. My other FCP projects are opening but not the one I am working on. I have no idea what to do. Final Cut opens and the message is 'Unable to open Project File'. I am so upset and really hope that someone out there can help.
I run 10.5.8, I have 10 GB memory. All my clips are imported as XDCAM EX 720p25 (original format MPEG HD) but I have been working in this project for weeks without a problem.
Thanks in advance
GillI don't know why it is set to the internal disk, but that is the default. That is not project related. It is system related (hence System Settings). So probably you started fcp one without the external disk attached. FCP forces you then to choose another scratch-, waveform-, thumbnail-, autosave location.
Probably you've set it all to the internal disk then.
Next time when the external disk was there again you might have only reset the scratch disk, but not your Autosave location... Just a thought.
That is, IMHO, the disadvantage of system orientated scratch disk settings...
Rienk -
I just got a new i-touch. i am unable to set it up. please help
Hi All
I just got a new itouch. To set it up, i downloaded the latest itunes and connected the ipod to my machine. Follwoing the instructions, i clicked on (Connect to itunes) on the ipod. The ipod got detected in itunes but i am unable to proceed. The ipod screen shows me the usb and itunes sign and itunes on the system has been "Accessing itunes store for ages now". I have a 2Mbps internet connected without issues and i doubt that'd be the problem.
Kindly let me know if m missing something/how to proceed to sync stuff up. Any help would be appreciated.Try here:
Can't connect to the iTunes Store
Maybe you are looking for
-
Attempting to log into FaceTime on iMac and get this error Could not sign in. I have tried multiple Apple IDs and checked that connection to internet is working as normal. Do I need to open certain ports on the router to allow a Facetime connection
-
Converting bytearray into binary format
Hi I have a byteaary , I want to convert this byteArray data into binary format (01010101) , Please help me [Bindable] private var imgByte:ByteArray; bitmapData = new BitmapData(pic.width, pic.height); bitmapData.draw
-
Hi there, I am trying to convert some AS2 code to AS3 with some difficulty... I am trying to loop over a movieclip and return all the names of the NESTED MC's..... in AS2: for (var i in this) { if (typeof (this ) == "movieclip") { trace(this[name]);
-
How can main vi detect whether sub-vi closes after opening and running it by user?
Hi I learned more using the call by reference node function. From what I know is that, after opening and running subvi by means of method nodes. So after running it, "call by reference" node stays active and there is no flow of data coming out of it
-
Weblogic.wsee.jaxws.client.async.AsyncTransportProvider
hi all, the project make a Problem : i do not kown where is it. <WSEE:25>com.bea.core.repackaged.springframework.beans.factory.BeanCreationException: Error creating bean with name 'weblogic.wsee.jaxws.client.async.AsyncTransportProvider': Instantiati