Unable to save a shared filter if personal storage is disabled

Somebody want to test this one?
Create a user with no rights to Personal Storage (no "My Folders").
Log in as that user.
Create a new filter.
Try to save it to a shared folder.
On my system, the OK button is greyed out on the Save As dialog. I can't save a filter with this user.
Using Firefox.
I hate O-R-A-C-L-E.

Yes, I have done that. If I grant U1 the rights to Personal Storage, I can save a filter to a shared folder, because the OK button is active on the Save dialog. If I do nothing more than revoke Personal Storage rights from U1, then the OK button is greyed out when attempting to save the filter to a shared folder.
What did you find when you tested the scenario?

Similar Messages

Microsoft Office 2004 (Word) unable to save files I have been running Office 2004 on my Intel iMac with Snow Leopard for some time and all of a sudden I cannot save a document. Word just stopped responding and I have to force quit. I can open Word and cr

Microsoft Office 2004 (Word) unable to save files
I have been running Office 2004 on my Intel iMac with Snow Leopard for some time and all of a sudden I cannot save a document. Word just stopped responding and I have to force quit. I can open Word and create a new document but I cannot save it. I reinstalled Word but that didn’t help. Then went to the Internet and found at least one other Mac user having the same problem which it suggests is caused by a recent Mac Security Update:
http://answers.microsoft.com/en-us/mac/forum/macoffice2004-macword/word-2004-wil l-not-open-or-save-documents/b04eb870-9b0d-4f3b-bb47-b122301e36f6
So I check for a new Mac Security Update and sure enough there was one. I downloaded it and now Word seems to be working, as it should. I can both open and save files. The only problem remaining is that when I open Word I get the following error message “An unexpected error occurred while trying to load the Microsoft Framework library”. I contacted Apple but they were unable to help.
How can I get rid of this error message?

Look, I realize you might have to get your machine working, so this is how you revert back.
Restore proceedure to pre-Security Update 2012-001 v 1.0 & v 1.1
#1 Backup your personal data off the machine.
Backup files off the computer (not to TimeMachine). If you don't have a external drive, get one and connect to the USB/Firewire port and simply drag and drop copy your User folder to the external drive, it will copy all your files. It's best to have two backups of your data off the machine when trying to restore.
Disconnect all drives now to prevent any mistakes from occuring.
#2 Reinstall OS X 10.6 from disk
Get out your 10.6 install disk and make sure it's clean and polished (very soft cloth and a bit of rubbing alcohol, no scratches) If your disk is borked, you'll have to order a new one from Apple with your serial number.
Hold c boot off the 10.6 disk (wired keyboard, internal optical drive), use Disk Utility First Aid to >Repair Disk of your internal drive (do not format or erase!!), Quit DU and simply re-install 10.6.
Note: Simply reinstalling 10.6 version from disk (without erasing the drive) only replaces 10.6.8 with 10.6.x and bundled Apple programs, won't touch your files (backup anyway) or most programs, unless they installed a kext file into OS X itself. (only a few on average do this)
#3 Update to 10.6.8 without Security Update 2012-001 v1.0 or v1.1
Reboot and log in, update to 10.6.8 via Software Update, but EXCLUDE THE Security Update 2012-001 by checkinig the details and unchecking the blue check box.
#4 Reinstall any non-working third party programs
When you reboot, make sure to reinstall any programs that require kext files installed into OS X, you'll know, they won't work when you launch them or hang for some reason as they are missing the part they installed into OS X.
If for some freakish reason you get gray screen at any time when booting (possible it might occur when you reinstall older programs), hold the shift key down while booting (Safe Mode, disables kext files) and update your installed third party software so it's compatible with 10.6.8.
https://support.apple.com/kb/TS2570
That's it really.

Unable to save a report that includes a datasource of "Microsoft SQL azure" type

I have install SSRS in azure using the following instructions (http://msdn.microsoft.com/en-us/library/dn449661.aspx) and all seems to work fine, however when I create a report in report builder 2014 (in this case empty) that includes a Microsoft SQL Azure
datasource type I am unable to save the report and get the following error message (even though when I test connection it succeeds).
"The report definition was saved, but one or more errors occurred while setting the report properties"
Reports with standard sql datasources work fine.
I have also tried creating the report using Visual Studio 2013 and get a similar error message.
I have tried this using SQL 2012 and SQL 2014 and get the same error.
Does anybody know how I can create a report with Microsoft SQL Azure datasource type?

Hi jamesla,
Based on my research, the issue can be caused by a deleted shared data source still exist under the Data Sources list in Report Builder. For more details about this scenario, we can refer to the following thread:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/7170dbee-048c-4298-89ba-df4d42924c8e/the-report-definition-was-saved-but-one-or-more-errors-occurred-while-setting-report-properties?forum=sqlreportingservices
Since the error message without detail information, we can try to render the report to see the detail error message. Besides, we can try to check it in the log file. The SQL Reporting Services log files are found on the reporting services point server, in
the folder %programfiles%\Microsoft SQL Server\<SQL Server Instance>\Reporting Services\LogFiles.
For more information about how to use Microsoft SQL azure as the data source of a report, please see:
http://msdn.microsoft.com/en-IN/library/ff519560.aspx
http://programming4.us/database/2158.aspx
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Still unable to save bookmarks in Safari 5.1.2 - any clues?

Starting with Safari 5.1.1 on Lion I have been unable to save any bookmarks after an initial few hours running when it has been possible. I had hoped that the new release of Safari 5.1.2 might have cured the problem, but it doesn't appear to have done so.
I've followed all the suggestions on various posts and cleared the numerous plists and caches. This results in being able to save bookmarks in the normal manner, but only for a few hours or so. The next time I open Safari I find that I am once again unable to save any bookmarks without going through the whole rigmarole of exporting the bookmarks, trashing all the Safari preferences, restarting Safri and importing all the bookmarks once again.
It's great if you have the time and the patience, but my patience is wearing very thin by now.
Does anyone have any definitive solutions to this problem, which happens on all my Macs running Lion and Safari 5.1, thus ruling out a problem with just one Mac?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of this exercise is to determine whether the problem is localized to your user account, or is system-wide. Enable guest logins and log in as Guest. For instructions, launch the System Preferences application, select “Help” from the menu bar, and enter “Set up a guest account” (without the quotes) in the search box.
While logged in as Guest, you won’t have access to any of your personal files or settings. Any application you run will behave as if you were running it for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
As Guest, launch Safari and test. Same problem(s)?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.

Unable to save/publish Projects on Project Server 2010() using Project Pro 2007 and 2010

Hi,
Recently we have upgraded from Project Server 2007 to 2010 SP-2 (BCM enabled) environment and from last few days we are getting issue with Project Plans where PMs are not able to update Projects means save and publish the Project using MS Project 2010/2007.
Whenever PMs try to open project using MS Project 2010 SP-2, it gets load successfully but when they hit save and publish no jobs are getting fired up nothing is happening. Only way to get out from MS Project 2010 window is to close the Project window and
and click discard changes. No error and exception windows are popping out in MS Project 2010, no error/problem/issue clue at all from MS Project 2010.
But when I try to update this Project plan for very first time using MS Project 2007 Sp-2 then I am getting below error
for any subsequent save and publish using MS Project 2007-SP2 getting below error
As an alternative I have tried to open this Project Plan using web and there it is getting opened saved and published successfully from PWA absolutely no issue.
Also I have saved this Project locally as XML and saved and published it on Server successfully. But after someday again this project got corrupt PMs started getting same problem again
I have also looked at ULS logs but not getting anything useful there.
So any guesses why this could happen that can give me pointers to find actual root cause, please let me know.
Thanks much !!!
Sachin Vashishth MCTS

Used below steps to fix the Projects on MSP 2010.
1) Open corrupted project in MS Project connected to PS 2010 Prod env.
2) Goto > Resource > Add Resource > Build Team From Enterprise
3) Check is there any local resource who has not replaced with corresponding enterprise resource. If yes then replace all those local resources with enterprise resource. If not then move to next step.
4) Open resource sheet view and sort or filter by local resources.
5) Then add few columns in resource sheet view like "Windows User Account, Email Address , Base Calendar etc".
6) Now check has any local resource having enterprise attribute assigned to it, if yes then delete or assign local value as appropriate.
7) Then GoTo > File > Save & Send > Save as project file > Save for sharing (at local location)
8) Close project plan window and click "Yes" to save changes.
9) Restart MS Project 2010 and open your project from local location.
10) Then Goto > File > Save & Send > "Publish to Project Server". This will open "Import Project Wizard" to validate Resources and Task in Project.
11) Then in Import Project Wizard window at left hand side click "Map Resource" to validate project resources.
12) This will "Map Project Resource to Enterprise Resource " check all the resources highlighted with "Red" font and map "Standard" calendar to local resources.
Note: Don't worry about local resource assigned "Standard calendar" but still highlighted "Red".
13) Then click "OK" and click on "Continue to step 2" at bottom of "Import Project Wizard".
14) Make sure you get number of errors 0 in step 2, else click on validate resource and take proper corrective action as explained in step 6.
15) If you leave at least one resource as a local resource (unmapped to an enterprise resource), you will see the local resource in the Import Resource grid on the right side
of the Confirm Resources page.
Examine the value in the "Import" column (if not able to see this column then insert this as new column) for the local resource .
The default value is "Yes", then change the value in the "Import" column
to "No", else system will import the local resource as an enterprise
resource.
16) Then "Continue to step 3, 4 and 5".
17) Then at Step 5 , Save project to Project Server by clicking "Save as" link.
18) Then publish the project to update the plan at PWA 2010.
Sachin Vashishth MCTS

Acrobat 9 Shared Review error "Could not save the shared review-enabled pdf file. .

I attempted to start a Shared Review of a PDF file. I have been unable to initiate the review. Upon completion of the setup routine (i.e., filed idenitified, server location identified, participant's email entered, send selected, I get the error message - Status" Could not save the shared review-enabled PDF file.

As a workaround, don't put the source PDF at the network folder location which you have specified in Shared Review wizard. Eg. if you are initiating a review at the network location \\servername\xyz, ensure that your source PDF is not placed at \\servername\xyz.
I have not understood your second question. Do you mean to say that Acrobat.com option is disabled for you?

Preflight keeps saying "Unable to save the PDF File after post processing"

I'm at a loss how to overcome this. Spent almost a whole day, together with another person, trying to fix it with no success!
I use Adobe pro CC on a PC
I usually receive pdf files from this one client who edits and formats a book in Mac Pages. Up until a few days ago I had no problems converting the client's pdfs into pdf/x3, but the last three versions of the latest file have stumped me.
Just to test, I first just tried to convert the file (33MB), unchanged, to pdf/x3 using the save as other option - message reads "the document has been saved, however, it could not be converted according to the selected standard profile: convert to PDF/X. Please use preflight with the profile "Convert to PDF/X" in order to identify those properties of the document which prevent it from being compliant to this profile"
if I then choose under Profiles - convert to PDF/X3 - it says no problems found, and appears to have saved the file. If I try to save again as a pdf/x3, just to make sure, it then tells me it's not pdf/x3 compliant
OK - so then I go back to preflight - and choose the standards function - then pdf/x3, then continue with the default colour profile. About halfway through the conversion, at the point of saving the file, I get the message "unable to save the pdf file after post processing"
So far I've had no luck figuring out what this is.
I then choose the option of "verify compliance of ppdf/x3" - message reads "pdf/x3 version key (GTS_PDFXVersion) missing", and "Trapped key not true or false"
Help!! How can I be sure the file converted / or not?
kim

Yes I was/am aware of Preflight's inability to play nicely over cloud technologies in certain cases, especially wrt Standards technologies, this will be partially addressed in an upcoming version of Preflight without saying too much. But the same thing could theoretically have happened if the file was also located on another local network client or server. Leaving aside the argument that this may violate the Acrobat User Agreement - since purchasing the software, the user agrees to employ its functionality on a single host system and precludes host-client-based scenarios - this simply is not a supported use, meaning the user may not have expectations that it will work at all, if the applications requirements are not observed. There do exist server-solutions for Preflight files within networks, but Acrobat and by extension Acrobat Preflight is not one of those solutions, and (still) belongs in the single host-based desktop environment.
However most (99.9%) functions within Acrobat <-> acrobat.com file exchange are supported, file syncing across multiple devices will soon be supported, but Standards compliance is still admittedly a problem at this point. Some testing has been done using 3rd party cloud technologies starting with enterprise-based solutions, such as Office 365, and this will continue to ramp up to include other 3rd party products.
As for the second point, Preflight will usually change the PDF version to be complaint, are you saying that it was unable to do so in this case? It seems that this error should have popped up during the normal Preflight conversion attempt. Personally I think solving a workflow problem using the print path is a little bit of a heavy-handed approach, but if helped and the results are acceptable, then that is good. Since that path is non-existent on a Mac, as one needs to Save as Adobe PDF from the Print dialog's PDF drop-down menu, I am assuming your workflow involved file creation on a Mac, then further processing on Windows using the PDF printer. I am wondering if a simple resave/Save As... to PDF with overwrite on a Mac, or Preflighting the file using a PDF version compatibility profile before the PDF/X conversion would have helped. Since there are such a multitude of methods that a PDF can be created, there are also many ways within Acrobat that a user can shape the file to be compatible with the expected workflow, ie, 'many ways to skin a cat', without being morbid.

Unable to save document as (Flash CS5 - BUG - OSX)

I have upgraded my CS4 to CS5 on MAC OSX and i'm having problems saving new and existing fla files. It doesnt always do it but it's very anoying when you have done some work and are unable to save it.
I get this message:
unable to save document as (file name)
please try saving to a different filename or location.
even if i try to save as to a different location i get the same message, this ONLY happens in flash CS5 and does not do it on any other application or even flash CS4. To put it bluntly i am absolutely furious with this and when you pay this amount of money should not get this hassle for such a simple action.
I have tried phoneing the adobe support line and it's a joke, you can't even understand the operator to even get anywhere and i just gave up having to repeat myself and asking them to repeat themselves.
I would be grateful if someone out there knows an answer to this or have a contact email for adobe support that i can email them direct. As a flash developer it's critical i can get on with my work without worrying if my work will even save.
Thanks in advance.
UPDATE: I can save files in CS5 as CS4 documents but not as CS5, this is so annoying.

I am having this same issue with Window 7 Professional 64 bit.
It seems I can reproduce it pretty reliably but have only seen it since I started working with trying to import and export runtime shared font libraries.
I create a new fla
I create a font asset in the library and set it to import and specify a relative path to the shared swf.
I save and test my swf and it works.
I go back into the font asset and change the location of the font swf to another relative path (this file is loaded into a shell so the raltive path will change).
After changing that import path I can no longer save the file even if I revert back to the previous value.
I have repeated this process a couple of times.

Unable to save permission changes in templates in win 2012

Hi,
PKI set up of (2003 and 2008) based Sub CA and 2003 based AD ( with schema version supporting 2008) is running in the enviornment. Now CA is migrating to 2012 setup. When i try to create template and make permission changes, it says " unable to save
permission changes. Directory object not found". When i duplicate and save the template with name change and wait for 10-15 min and then open that template again and make permission changes, it works.
Just wanted to know if this is because of some feature issue and will it get resolved if AD is upgraded to 2012 schema.
Thanks
Neha Garg

On Fri, 13 Feb 2015 07:07:13 +0000, Neha.ga wrote:
Also, I checked with my AD person. They are also saying that it can be because of current DC architecture and may be a normal thing. Currently they have 2003 AD and they will upgrade schema version for 2012 to see if that makes any change.
As Brian said, this is likely due to replication delays. Updating the
schema version is not likely going to resolve this. If you know how to work
around the issue then I wouldn't worry about it too much. Creating new
certificate templates should not be a frequent task.
Paul Adare - FIM CM MVP
Penguin Trivia #46: Animals who are not penguins can only wish they were.
-- Chicago Reader 10/15/82

Have 3.6.15. unable to save pictures that i view on the internet

I have version 3.6.15 and am unable to save pics that I view on the internet. Mainly facebook.

* Download a new copy of the Firefox program: http://www.mozilla.com/firefox/all.html
* Trash the current Firefox application to do a clean (re)install.
* Install the new version that you have downloaded.
Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data.

Flash CS6 - Unable to save document (to windows server) [OSX Mavericks]

Since updating to OSX Mavericks, I've been unable to save to our network server (HP Proliant with raid 6 running Windows 2008 R2).
I can save to any given filename once (open an old file from pre-OSX update and then save / create a new file and then save it as something) - any subsequent saves to that file name result in a warning dialogue box similar to this:
The original FLA will also corrupt during the attempted save process. The file size will also bloat.
For example my intial test file is listed as 211KB in finder
I open it perform an amend and save it once - that works fine. My file is still 211KB in finder
I then reopen it for another amend and attempt to save.
The unable to save warning dialogue appears. The file is now 421KB in finder and corrupt.
If I try to resave after the first file save fails the file continues to bloat.
e.g. if I attempt to save it another twice the file will now show as 843KB in finder and still be corrupt

Hi,
While this issue is being fixed, you can recover the corrupted files by following the below steps
1. Change the file extension of your corrupted fla to zip eg: corrupt.fla to corrupt.zip
2. Extract the zip file
3. Open the xfl file from the extracted folder in Flash CC(you will see the file is of up to date and non-corrupted)
Other trivial work-arounds:
1. Save your file as .xfl(uncompressed fla) instead of .fla
2. Connect your shared location via afp protocol on Mac 10.9 whereever-possible
3. Use Mac 10.8 or lower versions if-possible
Thanks!
Mohan

Unable to save the ALV layout variant and display of selection screen on F4

Hi All,
The end user wants to directly select the layout variant (SLIS_VARI). I have used the following code to display the layout variant on selection screen. But, I am unable to save the variant on ALV. Whenever I am trying to select the layout variants (by doing F4 on selection screen) its displaying "No Layout found".
Following is the code for displaying layout variant:
PARAMETERS: p_var TYPE slis_vari.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_var.
PERFORM f4_variant CHANGING p_var.
FORM f4_variant CHANGING c_variant TYPE slis_vari.
DATA: ls_variant TYPE disvariant,
            l_exit     TYPE char1.
ls_variant-report = sy-repid.
CALL FUNCTION 'REUSE_ALV_VARIANT_F4'
    EXPORTING
      is_variant = ls_variant
      i_save     = 'A'
    IMPORTING
      e_exit     = l_exit
      es_variant = ls_variant
    EXCEPTIONS
      not_found = 2.
IF sy-subrc = 2.
    MESSAGE ID sy-msgid TYPE 'S' NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
    IF l_exit EQ space.
      c_variant = ls_variant-variant.
    ENDIF.
ENDIF.
ENDFORM.                    " f4_variant
and following is the code for displaying the ALV:
FORM edition_alv.
ws_variant2 = ls_variant.
* Call ALV editor in list mode
IF p_list = 'X'.
    CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
      EXPORTING
        i_callback_program      = ws_extract1-report
        i_callback_user_command = ws_user_command
        is_layout               = ws_layout
        it_fieldcat             = wt_fieldcat
        it_sort                 = wt_sort
        i_save                  = 'A'
        is_variant              = ws_variant2
        it_events               = wt_events[]
      TABLES
        t_outtab                = wt_edition.
* Call ALV editor in grid mode
ELSE.
    CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
      EXPORTING
        i_callback_program      = ws_extract1-report
        i_callback_user_command = ws_user_command
        it_fieldcat             = wt_fieldcat
        it_sort                 = wt_sort
        i_save                  = 'A'
        is_variant              = ws_variant2
        it_events               = wt_events[]
      TABLES
        t_outtab                = wt_edition.
ENDIF.
ENDFORM.
I am not sure whats going wrong, but I am unable to save variants.
Please help.
Thanks,
Vishal.

The F4 will display you the existing layouts only. So you need to save the layout first & then execute the report again & check if you are getting F4 values for that field.
The Layout needs to get stored with variant.
Regards,
Mahesh

Unable to save data entered in editable field of IW37N output

Hi Gurus,
I have made one of the fields in IW37N ALV output as editable using exit IWOC0004. When I enter the values in the field, I am unable to save the data to the order. The orders are getting successfully released but the values entered are not saved in database. Please help.
Thanks,
Pramod.V

Discovered that the problem was with the Adobe version. Updated version to 8.1.1 and installed Active X control software and things started working.

Unable to save data in record working time

Hi All,
I am working on ESS portal , when I try to record & save working time in portal , it throw an error message as 'Unable to save data'.
Can you plz assist me on this.
Usefull answers will be awarded.
Thanks,
Nilima

Hi ALL,
I'm too facing the same problem....usefull answers will be awarded.

How can i stop an error message that comes up when i am using word? the error message is "word is unable to save the Autorecover file in the location specified. Make sure that you have specified a valid location for Autoreover files in Preferences,-

how can i stop an error message that comes up when i am using word? the error message is "word is unable to save the Autorecover file in the location specified. Make sure that you have specified a valid location for Autoreover files in Preferences,…"

It sounds like if you open Preferences in Word there will be a place where you can specify where to store autorecover files. Right now it sounds like it's pointing to somewhere that doesn't exist.

Unable to save a shared filter if personal storage is disabled

Similar Messages

Maybe you are looking for