Unable to save in zip format

Dear All,
I am using a Proxy to File Scenario which is calling an HTTP Service from a Mapping class in PI 7.3 with AAE and no ABAP stack.
The process is initiated by a proxy and then from within the mapping class the HTTP Service is called via the lookup method. A HTTP_AAE channel is utilized for the lookup. The Service returns multiple files in zip format in a stream and the data is saved to a file in zip extension with a file adapter.
Following are the communication channel used.
1. Sender Proxy Channel
2. Receiver HTTP_AAE channel
3. Receiver File Channel
When I am trying to unzip the file, it is throwing - The compressed (zipped) Folder is invalid or corrupted.
Following are the parameters set in the Receiver HTTP_AE channel.
Character Encoding : utf-8
Content Type : application/x-www-form-urlencoded
Please suggest
Rana

File type in receiver cc must be binary.
Regards,
Carme.

Similar Messages

Unable to save in excel format

Hi Experts,
My client is using Windows 7 Enterprise (32 bit) and MS Office 2010 (32 bit) and SAP ECC 6. The problem is when we click on expert mode we were not able to save in excel format. The report is coming blank. Is there any settings to be changed in excel.
Thanks in advance
Narayanan

Hi.
1. Before install 10 office, uninstall previous version.
2. Reinstall SAP(uninstall it befor)
3.'enable all macros in Excel
4. Trust access to Visual Basic Project
Save, Close Excel and run SAP...
SAP will support 2010 office from 7.20 version

Unable to save webi report in excel format

Hi All,
I have a question. I recently upgrsded my internet explorer from IE 7 to IE 8.
Previously, i was able to save webi reports in excel format without any issues.Even after upgrading to IE version8, i was able to save webi reoprts to excel without any issues for 2 weeks.
Suddenly I am unable to save Webi reports in excel format now.When I select the Save to my computer as Excel option the saving dialog box appears and hangs forever.
Can someone please advise me on this??
Please hel as it is very urgent.

Hi All,
Trying to replicate WEBI Excel Download issue.
Operating system : Windows 7
Internet Explorer : IE8 Version 8.0.7600.16385CO.
Jre Version : 1.6_ greater than 1.8 version.
If anybody having above specifications in your machines Please try to save a webi reports to excel format and send me the results.

Microsoft Office 2004 (Word) unable to save files I have been running Office 2004 on my Intel iMac with Snow Leopard for some time and all of a sudden I cannot save a document. Word just stopped responding and I have to force quit. I can open Word and cr

Microsoft Office 2004 (Word) unable to save files
I have been running Office 2004 on my Intel iMac with Snow Leopard for some time and all of a sudden I cannot save a document. Word just stopped responding and I have to force quit. I can open Word and create a new document but I cannot save it. I reinstalled Word but that didn’t help. Then went to the Internet and found at least one other Mac user having the same problem which it suggests is caused by a recent Mac Security Update:
http://answers.microsoft.com/en-us/mac/forum/macoffice2004-macword/word-2004-wil l-not-open-or-save-documents/b04eb870-9b0d-4f3b-bb47-b122301e36f6
So I check for a new Mac Security Update and sure enough there was one. I downloaded it and now Word seems to be working, as it should. I can both open and save files. The only problem remaining is that when I open Word I get the following error message “An unexpected error occurred while trying to load the Microsoft Framework library”. I contacted Apple but they were unable to help.
How can I get rid of this error message?

Look, I realize you might have to get your machine working, so this is how you revert back.
Restore proceedure to pre-Security Update 2012-001 v 1.0 & v 1.1
#1 Backup your personal data off the machine.
Backup files off the computer (not to TimeMachine). If you don't have a external drive, get one and connect to the USB/Firewire port and simply drag and drop copy your User folder to the external drive, it will copy all your files. It's best to have two backups of your data off the machine when trying to restore.
Disconnect all drives now to prevent any mistakes from occuring.
#2 Reinstall OS X 10.6 from disk
Get out your 10.6 install disk and make sure it's clean and polished (very soft cloth and a bit of rubbing alcohol, no scratches) If your disk is borked, you'll have to order a new one from Apple with your serial number.
Hold c boot off the 10.6 disk (wired keyboard, internal optical drive), use Disk Utility First Aid to >Repair Disk of your internal drive (do not format or erase!!), Quit DU and simply re-install 10.6.
Note: Simply reinstalling 10.6 version from disk (without erasing the drive) only replaces 10.6.8 with 10.6.x and bundled Apple programs, won't touch your files (backup anyway) or most programs, unless they installed a kext file into OS X itself. (only a few on average do this)
#3 Update to 10.6.8 without Security Update 2012-001 v1.0 or v1.1
Reboot and log in, update to 10.6.8 via Software Update, but EXCLUDE THE Security Update 2012-001 by checkinig the details and unchecking the blue check box.
#4 Reinstall any non-working third party programs
When you reboot, make sure to reinstall any programs that require kext files installed into OS X, you'll know, they won't work when you launch them or hang for some reason as they are missing the part they installed into OS X.
If for some freakish reason you get gray screen at any time when booting (possible it might occur when you reinstall older programs), hold the shift key down while booting (Safe Mode, disables kext files) and update your installed third party software so it's compatible with 10.6.8.
https://support.apple.com/kb/TS2570
That's it really.

Unable to save ANY types of files in Elements 5.0

Today I was working with Elements, creating a photomanipulation. This involved several layers, including a background of a beach, a horse, and some text. I've done this before with this exact same program on this exact same computer and not had too many problems. But not today.
Today when I try to save my creation, in ANY format, I get this message:
Could not save as
"C:\Users\User\...\Untitled-1.jpg" because the file is already in use or was left open.
GAHH!!!! Well of COURSE the stupid file is open, I'm working ON IT and trying to save my work!!! If I try to close the file, I get the standard question:
Save changes to the Adobe Photoshop Elements document "Untitled-1" before closing?
to which if I say yes, I get the same old crap:
Could not save as
"C:\Users\User\...\Untitled-1.jpg" because the file is already in use or was left open.
Now if I select save as *PSD or *PDD, *SOMETIMES* it acts like it has saved my work, (Instead of just saying it can't) but when I look for what I saved, all I find are a bunch of crap files that can't be opened. Example:
Cannot open 'C:\Users]User\Pictures\Photo Manips\~ps2AA0.tmp' because it is the wrong type of file.
Please note that I never actually chose to save ANY files called ~ps2aa0.tmp at any point in this process.
So I am stuck in a vicious cycle where before everything was working just fine. And it's not just editing photos or doing manipulations. I can take a brand new blank canvas, scribble a line on it with a paintbrush, and I am completely and totally unable to save even the simplest thing in ANY format whatsoever.
I tried uninstalling Elements and reinstalling it and that did absolutely nothing, except cause me to lose all the special effect brushes I spent hours downloading. And when I started it back up, I was right where I was before, it even had the same custom color preloaded on the palette, as if it did not truly uninstall AT ALL. (Just the special brushes were missing, thanks for nothing!)
My computer is maybe 8 months old now, a nice Hewlitt Packard with Vista. I specifically bought this computer so I could do more things with my art and more photos, and the first thing I loaded on it was the Bamboo tablet by Wacom, which came with Photoshop Elements 5.0 free. I've been using it ever since with hardly a problem and now today, I can't save the simplest little thing, and it is really aggravating me to death.
ANY light that anyone could shed on this would be most appreciated. I'm sure it's something extremely stupid, like I found the secret invisible "do not save anything ever again" button and somehow managed to press it. Whatever it is, I can not for the life of me figure out how to make it work like it's SUPPOSED to work. Somebody please help me before I go stark raving mad.

Further note: I have uninstalled this stupid program now THREE different times, including using a registry cleaner, which then deleted my DVD drive, thankyouverymuch. And even after I got the DVD drive back so I could reinstall the program, it was like I'd never uninstalled it (with the exception of the custom brushes still being missing) right down to the canvas size and paint color I had been using when all this started.
So uninstalling it does nothing, resetting preferences does nothing... I can not save my work, period. I've been fighting with this for about 8 hours and I am so frustrated I could just throttle someone with my bare hands for putting me through this crap.
For a product that came bundled with a $200 graphics tablet, it sure isn't worth a damn. Anybody got any ideas? I'm at my wits' end here.

Preflight keeps saying "Unable to save the PDF File after post processing"

I'm at a loss how to overcome this. Spent almost a whole day, together with another person, trying to fix it with no success!
I use Adobe pro CC on a PC
I usually receive pdf files from this one client who edits and formats a book in Mac Pages. Up until a few days ago I had no problems converting the client's pdfs into pdf/x3, but the last three versions of the latest file have stumped me.
Just to test, I first just tried to convert the file (33MB), unchanged, to pdf/x3 using the save as other option - message reads "the document has been saved, however, it could not be converted according to the selected standard profile: convert to PDF/X. Please use preflight with the profile "Convert to PDF/X" in order to identify those properties of the document which prevent it from being compliant to this profile"
if I then choose under Profiles - convert to PDF/X3 - it says no problems found, and appears to have saved the file. If I try to save again as a pdf/x3, just to make sure, it then tells me it's not pdf/x3 compliant
OK - so then I go back to preflight - and choose the standards function - then pdf/x3, then continue with the default colour profile. About halfway through the conversion, at the point of saving the file, I get the message "unable to save the pdf file after post processing"
So far I've had no luck figuring out what this is.
I then choose the option of "verify compliance of ppdf/x3" - message reads "pdf/x3 version key (GTS_PDFXVersion) missing", and "Trapped key not true or false"
Help!! How can I be sure the file converted / or not?
kim

Yes I was/am aware of Preflight's inability to play nicely over cloud technologies in certain cases, especially wrt Standards technologies, this will be partially addressed in an upcoming version of Preflight without saying too much. But the same thing could theoretically have happened if the file was also located on another local network client or server. Leaving aside the argument that this may violate the Acrobat User Agreement - since purchasing the software, the user agrees to employ its functionality on a single host system and precludes host-client-based scenarios - this simply is not a supported use, meaning the user may not have expectations that it will work at all, if the applications requirements are not observed. There do exist server-solutions for Preflight files within networks, but Acrobat and by extension Acrobat Preflight is not one of those solutions, and (still) belongs in the single host-based desktop environment.
However most (99.9%) functions within Acrobat <-> acrobat.com file exchange are supported, file syncing across multiple devices will soon be supported, but Standards compliance is still admittedly a problem at this point. Some testing has been done using 3rd party cloud technologies starting with enterprise-based solutions, such as Office 365, and this will continue to ramp up to include other 3rd party products.
As for the second point, Preflight will usually change the PDF version to be complaint, are you saying that it was unable to do so in this case? It seems that this error should have popped up during the normal Preflight conversion attempt. Personally I think solving a workflow problem using the print path is a little bit of a heavy-handed approach, but if helped and the results are acceptable, then that is good. Since that path is non-existent on a Mac, as one needs to Save as Adobe PDF from the Print dialog's PDF drop-down menu, I am assuming your workflow involved file creation on a Mac, then further processing on Windows using the PDF printer. I am wondering if a simple resave/Save As... to PDF with overwrite on a Mac, or Preflighting the file using a PDF version compatibility profile before the PDF/X conversion would have helped. Since there are such a multitude of methods that a PDF can be created, there are also many ways within Acrobat that a user can shape the file to be compatible with the expected workflow, ie, 'many ways to skin a cat', without being morbid.

Unable to save paragraph and character styles

I noticed an issue popping up for me in CS6 yesterday. I thought it was originally because of Fireworks saved PSD but an effort re-create the file from scratch in PS I'm coming across the same issue. In PS when I have a large amount of text layers and create a paragraph or character style, when I have ANY layer/group in my document locked I'm unable to save any paragraph or layer styles. Regardless of the layer or group being locked and regardless of what layer is highlighted I'm unable to save styles / any settings / name etc. The error I get for character styles for example is:
"Could not complete the Modify Named Character Style command because a specified layer is locked."
I did notice that in the Fireworks created PSD that without any layer even being locked I'd still get an error. It may be that this other document got some bad mojo from the Fireworks PSD. When creating a test doc and only creating a couple text layers and a bunch of empty groups and layers I'm unable to reproduce this. It appears to happen to me when I have a slew of text layers.
Has anyone else experienced this and figured out a more solid workaround?

If you want to add the styles to an already created document:
1) Create you Character style containing only the character color
2) Find and Replace, searching for text with red color and replace formatting with the new character style. (Don't type anything in the text part of the Find and Replace dialog)
3) Create and apply your paragraph style to all. The text with the Character Style applied will stay red.

Unable to save exported Aperture TIFFs as jegs when opened in Photoshop

I'm using the latest version of Aperture and need to do major retouching of the images I have edited using Aperture. When I "export versions" of the images, I normally choose "TIFF-50% of size" or "TIFF - fit within 1024x1024", but when I open them with Photoshop, after I worked on them I am unable to save them as a jpeg. The option just doesn't come up.
The only save options I am offered are - SAVE AS - Photoshop, Cineon, Dicom, FXG, IFF Format, Large Document Format, Photoshop PDF, Photoshop Raw, PNG, Portable Bit Map or TIFF.
Any idea why this is happening and how I can rectify? I need to use photoshop for my retouching and I don't want to have to export RAW files from Aperture, it's much simpler exporting a TIFF.

The tiff is a 16 bit file. Go to images/on the photoshop menu and convert to 8 bit. then the jpeg option will show up.
Cheers

I am unable to open a Zip file I downloaded.

I play an online golf game at www.wgt.com and to help my playng I downloaded an app from www.wgt.4fan.cz it is WGT Caddy PRO. I am unable to open the file. From reading the answers to other questions concerning opening Zip files, I downloaded Unarchiver and Stuffit Expander. Neither will open the files. There is a file WGTCaddy.exe, I get a box stating "We can't open application"WGTCaddy.exe" because Microsoft windows apps are not supported on OSX. The WGTCaddy.ini file brings the message 'A failure has occurred. The Stuffit Engine was unable to determine the file format. As for the Microsoft message, I bought my iMac from a 3rd party and it has Office 2008 and other Microsoft programs, I am able to open them all. There is a video on YouTube demonstratin how to download WGTCaddy PRO and install it. The person on the video says it is a ZIP file, I am a computer dunce, so I am taking what he says, that it is a ZIPfile, at face value. That is my sad tale, any suggestions? Might the app not be compatible with OSX? Could it be another type of file? I 'll appreciate any suggestions. Thank you all.

Exe files are Microsoft Windows executables and will not work on Macs. Your Office 2008 is Microsoft Office 2008 for Mac. That's why it works.

Unable To Save Templates - Receive A Restart Error

Hi there,
As of yesterday I am unable to save templates. At first I thought it may be an error with the project that I was working on, but I've opened up old projects and tried to resave those as a new template and I receive an error.
If I create a new project and try to save it as a template, I also receive this error.
Anybody know why this is happening? Thanks - Scott.

Hi, Scott-
It would be really useful if you could ZIP up the project so that we can take a look at it.
Thanks,
-Elaine

I am unable to save from a thumb drive to my external hard drive. i am not running Lion.

I am unable to save from a thumb drive to my external hard drive. I am not running Lion.

How is each drive formatted? If you don't know it's easy to find out. In Finder highlight each and click Command I (that's I as in Ivan) and it will tell you. Both drives should be formatted as Mac OS Extended (Journaled) assuming you are only using each with your Mac. If you share with MS Windows machines then it get's more complex.

Flash CS6 - Unable to save document (to windows server) [OSX Mavericks]

Since updating to OSX Mavericks, I've been unable to save to our network server (HP Proliant with raid 6 running Windows 2008 R2).
I can save to any given filename once (open an old file from pre-OSX update and then save / create a new file and then save it as something) - any subsequent saves to that file name result in a warning dialogue box similar to this:
The original FLA will also corrupt during the attempted save process. The file size will also bloat.
For example my intial test file is listed as 211KB in finder
I open it perform an amend and save it once - that works fine. My file is still 211KB in finder
I then reopen it for another amend and attempt to save.
The unable to save warning dialogue appears. The file is now 421KB in finder and corrupt.
If I try to resave after the first file save fails the file continues to bloat.
e.g. if I attempt to save it another twice the file will now show as 843KB in finder and still be corrupt

Hi,
While this issue is being fixed, you can recover the corrupted files by following the below steps
1. Change the file extension of your corrupted fla to zip eg: corrupt.fla to corrupt.zip
2. Extract the zip file
3. Open the xfl file from the extracted folder in Flash CC(you will see the file is of up to date and non-corrupted)
Other trivial work-arounds:
1. Save your file as .xfl(uncompressed fla) instead of .fla
2. Connect your shared location via afp protocol on Mac 10.9 whereever-possible
3. Use Mac 10.8 or lower versions if-possible
Thanks!
Mohan

Unable to save the ALV layout variant and display of selection screen on F4

Hi All,
The end user wants to directly select the layout variant (SLIS_VARI). I have used the following code to display the layout variant on selection screen. But, I am unable to save the variant on ALV. Whenever I am trying to select the layout variants (by doing F4 on selection screen) its displaying "No Layout found".
Following is the code for displaying layout variant:
PARAMETERS: p_var TYPE slis_vari.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_var.
PERFORM f4_variant CHANGING p_var.
FORM f4_variant CHANGING c_variant TYPE slis_vari.
DATA: ls_variant TYPE disvariant,
            l_exit     TYPE char1.
ls_variant-report = sy-repid.
CALL FUNCTION 'REUSE_ALV_VARIANT_F4'
    EXPORTING
      is_variant = ls_variant
      i_save     = 'A'
    IMPORTING
      e_exit     = l_exit
      es_variant = ls_variant
    EXCEPTIONS
      not_found = 2.
IF sy-subrc = 2.
    MESSAGE ID sy-msgid TYPE 'S' NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
    IF l_exit EQ space.
      c_variant = ls_variant-variant.
    ENDIF.
ENDIF.
ENDFORM.                    " f4_variant
and following is the code for displaying the ALV:
FORM edition_alv.
ws_variant2 = ls_variant.
* Call ALV editor in list mode
IF p_list = 'X'.
    CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
      EXPORTING
        i_callback_program      = ws_extract1-report
        i_callback_user_command = ws_user_command
        is_layout               = ws_layout
        it_fieldcat             = wt_fieldcat
        it_sort                 = wt_sort
        i_save                  = 'A'
        is_variant              = ws_variant2
        it_events               = wt_events[]
      TABLES
        t_outtab                = wt_edition.
* Call ALV editor in grid mode
ELSE.
    CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
      EXPORTING
        i_callback_program      = ws_extract1-report
        i_callback_user_command = ws_user_command
        it_fieldcat             = wt_fieldcat
        it_sort                 = wt_sort
        i_save                  = 'A'
        is_variant              = ws_variant2
        it_events               = wt_events[]
      TABLES
        t_outtab                = wt_edition.
ENDIF.
ENDFORM.
I am not sure whats going wrong, but I am unable to save variants.
Please help.
Thanks,
Vishal.

The F4 will display you the existing layouts only. So you need to save the layout first & then execute the report again & check if you are getting F4 values for that field.
The Layout needs to get stored with variant.
Regards,
Mahesh

Unable to save data entered in editable field of IW37N output

Hi Gurus,
I have made one of the fields in IW37N ALV output as editable using exit IWOC0004. When I enter the values in the field, I am unable to save the data to the order. The orders are getting successfully released but the values entered are not saved in database. Please help.
Thanks,
Pramod.V

Discovered that the problem was with the Adobe version. Updated version to 8.1.1 and installed Active X control software and things started working.

Unable to save data in record working time

Hi All,
I am working on ESS portal , when I try to record & save working time in portal , it throw an error message as 'Unable to save data'.
Can you plz assist me on this.
Usefull answers will be awarded.
Thanks,
Nilima

Hi ALL,
I'm too facing the same problem....usefull answers will be awarded.

Unable to save in zip format

Similar Messages

Maybe you are looking for