Unable to save PDF. The disk used for temporary files is full.

I just started getting the "Document could not be saved. The disk you were saving to or the disk used for temporary files is full. Free some space on this disk and try again, or save to a different disk" message.
I am running Windows 8. I've seen fixes for this on the Internet for previous versions of Windows on the Internet, but haven't seen one that works for Windows 8. Help, please.

Same problem here. Any ideas?
Saving with Shortcut "CRTL+SHIFT+S" works just fine.
Using IE 11.0.9600.17728 and Adobe Reader 11.0.10

Similar Messages

Unable to save PDF's from Internet Explorer. Error "The document could not be saved. The disk you were saving to or the disk used for temporary files is full. Free some space on this disk and try again, or save to a different disk."

We are currently in a published desktop environment in Citrix XenApp 6.5. Server is running on Windows 2008 R2. Users are not able to save PDF's into the redirected folders (ie Desktop or My Documents). Exactly same issue described in "The disk you were saving to or the disk used for temporary file is full...." Anyone has any suggestion??

Same problem here. Any ideas?
Saving with Shortcut "CRTL+SHIFT+S" works just fine.
Using IE 11.0.9600.17728 and Adobe Reader 11.0.10

Unable to save PDF - Internet Explorer Protected Mode "A file error has occurred"

Hi,
I hope you can all assist! Here's the detail:
Reader XI (11.0.06) and deployed as physical installation (.msi)
Windows 7 x64 Enterprise
Internet Explorer 8 & 9
Opening PDF's from HTTP & HTTPS locations
Users are unable to save the PDF file to their chosen location (network share or local directory) "A file error has occurred".
When the Internet Explorer Protected Mode is switched off, users are able to save the file to their chosen location.
Is this is specific functionality of IE Protected Mode whereby the ActiveX control is being restricted.
Is this due to Enhanced security within the Adobe Reader 11.0.06 application?
Our current Reader version (9.3.0) is able to save files from unprotected locations, so this is creates a problem justify upgrading.
Do anyone have any suggestions?
Look forward to any assistance or suggestions.
Thanks,
Simon.

Hi Simon,
How are you saving the file (right click or from File menu)? Does the problem happen with any PDF file? Does the problem go away if you turn "Enable Protected Mode at startup" from Reader (Preferences > Security (Enhanced)?

Unable to save PDF's that have editable fields

I am unable to save forms that have editable fields. I get the error "The document could not be saved. The disk you were saving to or the disk used for temporary files is full. Free some space on this disk and try again, or save to a different disk"
I am running windows xp, and started with reader 10.1.4 having this issue, now i upgraded to 11 and same results. My co workers can save the same form and i have over 80 gb of free space on my hard drive which is where i am saving it to. I have tried saving it to other locations on my hard drive but get the same message. I can however save pdf files that have no fillable forms in them just fine.
I could really use some help.
Thanks

Figured out prtected mode was set to enabled on startup. Turned that off and no more problems.

Disk space for program file

Hi,
Wondering if any body has experienced with this. The disk space for program file(not data base file) is full and I want to know what are my options to free some space? Please include tcodes......

Latha,
You can follow the note and you will be able to schedule few background jobs for this. If you need to delete files at operating system level (Windows/Unix) then you can simply use delete or rm operating system commands.
You may want to move/compress few files if you think you may need in the future for some analysis purpose. I am attaching one more note for standard reorgnization jobs.
Note 16083 - Standard jobs, reorganization jobs [https://service.sap.com/sap/support/notes/16083]
Hope this helps.
Manoj

Folder Specified for Temporary Files is not Available

Whenever I start PS CS, I get a "The Folder Specified for Temporary Files is not Available" error message. How do I fix this?
Thanks!
JB

>F is internal.
Doesn't proof that it's working. Disable it (as a scratch disk). See what happens.
Rob

Using Photoshop Elements 12 on my MacBook Pro laptop, when saving a file I have been working on I get the following message although there is at least 50GB free space on the hard drive: Could not save because the disk is full.

I have been making Christmas Cards, working in layers and then flattening the image. However, I am unable to save the final image as I get the following message: Could not save because the disk is full. Looking at the system report for my laptop shows there is 52GB of free space.

Well, running on a 2006 model. I did not have a startup disc. Initially, it booted up on original software in 2006. Since then, I've upgraded to 10.6 via a box set. And, since then I think I popped it up to lion.
All I have on a disc is snow leopard. And, I can't get farther than the setup screen due to hard drive. I'm taking to a apple authorized repair store right now. We'll see what they tell me . I'm just going to weigh the cost of repair vs. buying new.
Another bad, stupid thing is I had no means of backing up my stuff. So, I might have lost things like music, vids, etc. we'll see if they can recover. If the cost is too much for repair I might just forget it and start over with a new system. Just not sure at this point.

I have Lightroom 4 purchased in disk download format. I am considering purchasing a MacBook Pro but this doesn't have a CDRom. Can I use the serial code to download on to MacBook via the internet? I have only used the disks once for my iMac.

I have Lightroom 4 purchased in disk download format. I am considering purchasing a MacBook Pro but this doesn't have a CDRom. Can I use the serial code to download on to MacBook via the internet? I have only used the disks once for my iMac.

you need a lr serial for mac. the serial number for pc and mac are different.
you can download a trial lr 4 for your mac but you need a mac serial number to install.
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 |12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.7.1| 5 | 4 | 3 | 2.7(win),2.7(mac)
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.
window using the Lightroom 3 link to see those 'Important Instructions'.

Unable to debug/correct the CMOD code for a variable used in a query

unable to debug/correct the CMOD code for a variable used in a query
i am using the data in a DSO in a query and using a custom coding variable in that query , but this data not coming in that query ..
can anyone suggest how to debug that cmod code for the variable?
code is written in CMOD tocde for the variable.

belowis the code that i have written for a custom coding for a variable
*******Start***
IF i_step = 2.
CASE i_vnam.
    WHEN 'IC_COMPCD'.
     TYPES:       BEGIN OF gt_itab_DyAuthTable,
                       username TYPE /bic/afiop_o1200-/BIC/IC_USER,
                       companycode TYPE /bic/afiop_o1200-COMP_CODE,
                  END OF gt_itab_DyAuthTable,
                  BEGIN OF gt_itab_Cocd_all,
                        companycode TYPE /BI0/MCOMP_CODE-COMP_CODE,
                  END OF gt_itab_Cocd_all.
      DATA: gi_itab_DyAuthTable TYPE STANDARD TABLE OF gt_itab_DyAuthTable,
            wa_itab_DyAuthTable TYPE gt_itab_DyAuthTable.
       DATA: gi_itab_Cocd_all TYPE STANDARD TABLE OF gt_itab_Cocd_all,
            wa_itab_Cocd_all TYPE gt_itab_Cocd_all.
      SELECT /BIC/IC_USER
             COMP_CODE FROM /bic/afiop_o1200
        INTO CORRESPONDING FIELDS OF TABLE gi_itab_DyAuthTable
        WHERE /bic/ic_user = sy-uname.
      LOOP AT gi_itab_DyAuthTable INTO wa_itab_DyAuthTable.
        IF wa_itab_DyAuthTable-companycode EQ '*'
          OR
          wa_itab_DyAuthTable-companycode EQ ' '.
          SELECT COMP_CODE FROM /BI0/MCOMP_CODE
              INTO CORRESPONDING FIELDS OF TABLE gi_itab_Cocd_all.
          LOOP AT gi_itab_Cocd_all INTO wa_itab_Cocd_all.
            l_s_range-low    = wa_itab_Cocd_all-companycode.
            l_s_range-sign   = 'I'.
            l_s_range-opt    = 'EQ'.
            APPEND l_s_range TO e_t_range.
          ENDLOOP.
      to exit the loop if any one value is */space/all for a user's compcode values
        EXIT.
        ENDIF.
      ENDLOOP.
       if control is here means, the comp codes values didnt have */space
          LOOP AT gi_itab_DyAuthTable INTO wa_itab_DyAuthTable.
            l_s_range-low    = wa_itab_DyAuthTable-companycode.
            l_s_range-sign   = 'I'.
            l_s_range-opt    = 'EQ'.
            APPEND l_s_range TO e_t_range.
          ENDLOOP.
Endcase.
Endif.

Unable to save/update the Adobe PDF in the H drive

Hi,
I am unable to save/update the PDF which is designed by Adobe Live Cycle Designer ES3 version in any drive other than C drive or desktop.
Please guide me on how to solve this problem.
Thanks,
Sushma Kadimisetty.

Sounds like a permissions issue on your machine. Contact your system administrator.

Replaced HD yesterday Was able to restore from Time Machine Now, it won't back up to Time Machine. I removed the TM and tried to add it- the error is "The disk image for "computername.sparsebundle" is in use. Try ejecting the disk image - How do I do?

Replaced HD yesterday Was able to restore from Time Machine Now, it won't back up to Time Machine. I removed the TM and tried to add it- the error is "The disk image for "computername.sparsebundle" is in use. Try ejecting the disk image - How do I do?

Hello jfilbey,
Thanks for using Apple Support Communities.
Power cycle the disk Time Machine is backing up to.
For more information on this, take a look at:
Time Machine: Troubleshooting backup issues
http://support.apple.com/kb/HT3275?viewlocale=en_US&locale=en_US
Best of luck,
Mario

Trying to load music to ipod, getting "windows - write delayed fail unable to save all the data for th E: etc

trying to load music from itunes to my ipod classic message rec'd WINDOWS - WRITE DELAYED FAILED UNABLE TO SAVE ALL THE DATA FOR THE E: THE DATA WAS LOST
is this my ipod or an itunes problem?

I spoke to ipod tech support and was told "We do not support itunes. It is only a web based support" Which apparently does not exist.

Should I partition the disks using fdisk (300 GB lun) for ASM?

We've configured oracle 11g and asm on SLES10sp2 systems prior to the one I'm working on now. We use disks that are luns from SAN storage. The SAN devices vary (Tier 1 and tier 2). In earlier installs, we did not need to partition the disks using fdisk (luns up to 40GB in size). We did need to write a label using fdisk and 'w'. The asm that is being configured now is using 300 GB luns (on sles10 sp2 oracle 11g). I've needed to create a new primary partition using fdisk and then have asm 'look' as the partitioned device. If I did not do that, ASM would not look at the unpartitioned device.
The database in now built and it seems to be working ok.
Does this config sound ok?
Thanks,
Eleanor

I think this is right. I also always had to partition disks and let asm use the partitions because for some reason it did not accept the full device.
Bjoern

Unable to attach PDF to email (Outlook for Mac 2011)

We are pushing out software upgrades for CS5 and MS Office 2011 for Mac. We've discoverd that we can't use the Attach to email feature in Acrobat. The spinning rainbow wheel pops up for about a minute, and then Acrobat is non-responsive and we have to force quit. We can still drag and drop an attachment so we have a viable workaround but obviously we'd like to be able to use the automated feature.
All software is up-to-date.
In the preferences panel of Outlook, we have selected Outlook to be the default mail application.
As a sidenote, this feature doesn't work with Acobat X beta either. However, in the beta version of Acrobat X, if we declare Apple's mail application to be the default, it works fine. Unfortunately we use the Office suite as part of our enterprise system, so that's what we need to work with.
Has anyone else experienced this? I've logged a ticket with Adobe but I haven't heard back from them yet.
Thanks for any advise.

Take the bhama way
figured out how to make it work. I am using Adobe Acrobat X Pro (mac)
and MS Outlook for Mac 2011.
For those who are interested, this is what I did:
1. Create a folder on desktop to save your pdf¹s files you want to email
to. Mine is named, "PDF to Email"
2. Open Automator, create a "Folder Action"
3. At the top, "Choose Folder", choose your newly created folder on the
desktop
4. Choose the "Rename Finder Items" action from the action list. I chose,
"Don¹t Add" on the add a Copy Finder Items Action menu.
5. On the "Add Date or Time to Finder Item Names" I chose, "Name Single
Item" from the first drop down menu.
6. Click on "Options" at the bottom of that window to select the "Show
this action when the workflow runs" so you can rename your file
something other than the Acrobat default.
7. Choose the "Create New Outlook Mail Message" from the action list and
add it below the "Name Single Item in Finder Item Names"
8. Choose "File>Save As" and give your file a name. Mine is, "PDF to
Email".
9. Close Automator
10. Open Acrobat X Pro.
11. Go to "File>Action Wizard>Create New Action"
12. Here you choose, "Save to>A Folder on my computer"
13. Choose the folder on the desktop that we saved earlier
14. Save the file, with the action name you will remember.
Now when you are in Acrobat X Pro and you want to send that .pdf file via
Outlook for Mac 2011, follow the steps below.
With the file you want to email open, go to "File>Action Wizard>(Action
you created) Mine is "PDF to Email". It will take a few seconds, but you
will get an "Action Completed". You will get a pop up that allows you to
name/rename the file. Then it should open your Outlook with your .pdf
attached and ready for sending.
You might need to tweak the actions to suit your needs, but this should
work for you.
De: DaveGrif <[email protected]>
Responder a: <[email protected]>
Fecha: Mon, 05 Dec 2011 15:56:02 -0700
Para: Eugenio Soberon <[email protected]>
Asunto: unable to attach PDF to email (Outlook for Mac
2011)
Re: unable to attach PDF to email (Outlook for Mac 2011)
created by DaveGrif <http://forums.adobe.com/people/DaveGrif> in Acrobat
Macintosh - View the full discussion
<http://forums.adobe.com/message/4065409#4065409>
It's supposed to work now? I've made sure I'm on latest (check for update)
and it says I am. Still get an error. It does bring Outlook to the
forground, but same error when I hide Outlook - An error occurred while
trying to create a mail document. Suggestions?
Replies to this message go to everyone subscribed to this thread, not
directly to the person who posted the message. To post a reply, either reply
to this email or visit the message page:
http://forums.adobe.com/message/4065409#4065409 To unsubscribe from this
thread, please visit the message page at
http://forums.adobe.com/message/4065409#4065409. In the Actions box on the
right, click the Stop Email Notifications link. Start a new discussion in
Acrobat Macintosh by email
<mailto:[email protected].co
m> or at Adobe Forums
<http://forums.adobe.com/choose-container!input.jspa?contentType=1&container
Type=14&container=3399> For more information about maintaining your forum
email notifications please go to
http://forums.adobe.com/message/2936746#2936746.

Verify permissions failed: Framework unable to communicate with the Disk Management daemon

I'm experiencing problems with the Disk Management daemon on my MBPro Retina running Mountain Lion 10.8.2. I discovered it first when I tried to enable file vault and received the "Framework unable to communicate with the Disk Management daemon" error message.
So I started up Disk Utilities (which started fine) and tried to run Verify Disk Permissions. It failed with the following errror message:
"Verify permissions failed: Framework unable to communicate with the Disk Management daemon"
So I booted in to safe mode and tried Verify Disk Permissions again with the same results.
So I booted in to the recovery partition to run Disk Utilities. It ran fine and the Verify Disk Permissions found some errors which I then fixed.
I re-booted normally but am still experiencing the same behavior.
I have turned off my anti-virus (Sophos) to no effect.
I checked the console and found the following message:
12/6/12 3:27:02.828 PM Disk Utility[157]: *** WARNING: Method userSpaceScaleFactor in class NSWindow is deprecated on 10.7 and later. It should not be used in new applications. Use convertRectToBacking: instead.
Thoughts or suggestions? Thanks!

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether your problem is caused by third-party system modifications that load automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
*Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Unable to save PDF. The disk used for temporary files is full.

Similar Messages

Maybe you are looking for