Unable to Save Pictures to Device After 10.2 Update

After the Verizon update to 10.2, I am unable to save pictures received via MMS to the device. The screen dims like it is going to work, but after a (too long) delay the screen returns to where I was before viewing the picture. On the plus side, it does allow me to share, and after doing this a few times, the suggestion comes up to my email so I can email the pictures to myself and at least I have access to them on my computer.
As expected, my testing shows the same problem with pictures received via BBM and via eMail.
Since the 10.2 update, EVRYTHING runs in super slow motion, and leads an inpatient user to think the phone is hung up. In this case I'm sure that this is an error, not a delay because I have waited and waited for the function to work properly.

Have you tried rebooting the device by removing the battery?
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Similar Messages

Preflight keeps saying "Unable to save the PDF File after post processing"

I'm at a loss how to overcome this. Spent almost a whole day, together with another person, trying to fix it with no success!
I use Adobe pro CC on a PC
I usually receive pdf files from this one client who edits and formats a book in Mac Pages. Up until a few days ago I had no problems converting the client's pdfs into pdf/x3, but the last three versions of the latest file have stumped me.
Just to test, I first just tried to convert the file (33MB), unchanged, to pdf/x3 using the save as other option - message reads "the document has been saved, however, it could not be converted according to the selected standard profile: convert to PDF/X. Please use preflight with the profile "Convert to PDF/X" in order to identify those properties of the document which prevent it from being compliant to this profile"
if I then choose under Profiles - convert to PDF/X3 - it says no problems found, and appears to have saved the file. If I try to save again as a pdf/x3, just to make sure, it then tells me it's not pdf/x3 compliant
OK - so then I go back to preflight - and choose the standards function - then pdf/x3, then continue with the default colour profile. About halfway through the conversion, at the point of saving the file, I get the message "unable to save the pdf file after post processing"
So far I've had no luck figuring out what this is.
I then choose the option of "verify compliance of ppdf/x3" - message reads "pdf/x3 version key (GTS_PDFXVersion) missing", and "Trapped key not true or false"
Help!! How can I be sure the file converted / or not?
kim

Yes I was/am aware of Preflight's inability to play nicely over cloud technologies in certain cases, especially wrt Standards technologies, this will be partially addressed in an upcoming version of Preflight without saying too much. But the same thing could theoretically have happened if the file was also located on another local network client or server. Leaving aside the argument that this may violate the Acrobat User Agreement - since purchasing the software, the user agrees to employ its functionality on a single host system and precludes host-client-based scenarios - this simply is not a supported use, meaning the user may not have expectations that it will work at all, if the applications requirements are not observed. There do exist server-solutions for Preflight files within networks, but Acrobat and by extension Acrobat Preflight is not one of those solutions, and (still) belongs in the single host-based desktop environment.
However most (99.9%) functions within Acrobat <-> acrobat.com file exchange are supported, file syncing across multiple devices will soon be supported, but Standards compliance is still admittedly a problem at this point. Some testing has been done using 3rd party cloud technologies starting with enterprise-based solutions, such as Office 365, and this will continue to ramp up to include other 3rd party products.
As for the second point, Preflight will usually change the PDF version to be complaint, are you saying that it was unable to do so in this case? It seems that this error should have popped up during the normal Preflight conversion attempt. Personally I think solving a workflow problem using the print path is a little bit of a heavy-handed approach, but if helped and the results are acceptable, then that is good. Since that path is non-existent on a Mac, as one needs to Save as Adobe PDF from the Print dialog's PDF drop-down menu, I am assuming your workflow involved file creation on a Mac, then further processing on Windows using the PDF printer. I am wondering if a simple resave/Save As... to PDF with overwrite on a Mac, or Preflighting the file using a PDF version compatibility profile before the PDF/X conversion would have helped. Since there are such a multitude of methods that a PDF can be created, there are also many ways within Acrobat that a user can shape the file to be compatible with the expected workflow, ie, 'many ways to skin a cat', without being morbid.

Airport Utility was unable to find your Airport device after restarting.

- I just updated the firmware on my base station (it a white dome?? i think snow?) to 5.7
- I am running AirPort Utility 5.5.2 (also recently updated)
- I have (3) AirPort Expresses (just updated firmware yesterday) and now are not being seen in the airport utility. They had been running for about two years just fine.
I have done a hard reset and was then able to see the Airport Express and go through set up. Upon finalizing the set up I get this message:
"Airport Utility was unable to find your Airport device after restarting."
This is happening with all 3 AirPort Expresses

Hello !
I had the same kind of problems when I upgraded to the latest version of Airport (5,7).
The Airport express seemed to have been disconnected, and nothing I could do to reconfigure it, after hard resetting it, seemed to be working.
I did two or three hard resets before remembering having been in a situation like that a while ago.
I went back to the Mini, **deactivated the firewall (in the "preferences" panel), then deactivated also the firewall of the Modem/router provided for my internet connection. Then I went in the other room and did another hard reset of the Airport express, came back in the mini's room, opened the Airport utility, the icon of the Airport express was already visible (which wasn't the case before... ), did the re-configuring.
The reconfigured Airport express reappeared very quickly, then I reactivated the firewalls of the Mini and the router. Voilà !
It took less than two minutes !
And since then the Mini have been streaming music without a glitch to the Airport express.
I hope this will help you and others !

AirPlay not working on any of my apple devices after iOS 6 update. Any ideas on how to fix this?

AirPlay not working on any of my apple devices after iOS 6 update. Any ideas on how to fix this?

If You are trying to watch content when you are downloading, it let it download then watch it this works for me as i had the same problem.

Unable to connect Wi-Fi network after ISO 6 update

unable to connect Wi-Fi network after ISO 6 update. I'm not impressed.

I updated to ISO 6 on my Daughters Iphone 4S, my Iphone 4, and I have now received my new Iphone 5 yesterday and now all 3 of them have wi-fi issues. I know its not my wi-fi because My Daughters Ipad 2 and my Wife's Iphone 4 is still on 5.11 and the wi-fi works fine. I cant understand why apple have not been saying what's going on and when they will fix it. I have tried everyone's suggestions on this forum and the Internet. Still no luck.

UNABLE to save pictures to photo album from SMS text

I have the 16GB 3GS, and no e-mail or SMS text that contain pictures can be saved to my photo album. Each time I select save picture, nothing happens. I have restored my iPhone 3 times from back ups and once as "a new phone" loosing all my app settings.

Well, got home and resynced and restored my iphone
When you restored your new phone, did you restore it from the backup of your old phone? If so, that "could" be your problem. Something in your backup could very well be corrupt, thus restoring your problem to your new phone. Why not try restoring your phone as a "new" device in itunes, followed by syncing your content back to your phone. If this solves your issue, that would confirm your old backup is corrupt.

Have 3.6.15. unable to save pictures that i view on the internet

I have version 3.6.15 and am unable to save pics that I view on the internet. Mainly facebook.

* Download a new copy of the Firefox program: http://www.mozilla.com/firefox/all.html
* Trash the current Firefox application to do a clean (re)install.
* Install the new version that you have downloaded.
Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data.

Can not view pictures on browsers after latest Ipad update to Ver:4.3.5 (8L)

I just updated my Ipad to the latest rev: 4.3.5(8L1) today. Now I'm not able to see pictures on CL and other browsers liek Opera mini. Can some tell me what happen and how can it be fixed! Thanks

Hello King_Penguin,
This worked! Thank you so much!
I deleted one track from my iPad library when connected and visible in iTunes on my computer, I then dragged the same track from my iTunes library back onto the iPad. It copied and done a sync. When I went into my iPad music on the device itself it sat updating the library for around a minute then everything was there!
Thanks again, 30GB of music/videos/films all back!
Scott.

Satellite C655-S5044 won't recognize TSST CDDVDW TS-L633C ATA device after windows 7 update

Laptop: Toshiba Satellite C655-S5044; Windows 7 64-bit
DVD Drive - TSST CDDVDW TS-L633C ATA Device
After an automatic Windows update, the CD/DVD drive is no longer recognized.
Running troubleshoot on the PC yields:
Problem detected with TSST CDDVDW TS-L633C ATA Device Driver has been disabled
Checking for new drivers says I have the latest.
I tried running a microsoft fixit for DVD/CD drives - no problem found
I tried deinstalling the driver, then rebooting. This yields a message:
Device Driver was not successfully installed please consult with your device manufacturer.
I tried the TSST website for Toshiba and that rerouted me here.
Searching the forums I have seen similar issues with other hardware/OS combinations but not exactly the same.
Additional Info from the device manager:
Device Type: DVD/CD-ROM Drive
Manufacturer: (Standard CD-ROM drives)
Location: Location 0 (Channel 1, target 0, Lun 0)
I suspect that I have multiple device drivers on the computer for this device and the OS is installing one that doesn't work.
How can I get the correct current driver and install it?
Does anyone recognize this problem and have a fix?
Thanks.

Satellite C655-S5044
I didn't find that model anywhere.
Device Driver was not successfully installed please consult with your device manufacturer.
The driver is native to Windows. Sounds to me like a hardware malfunction.
After an automatic Windows update,..
In a Microsoft forum, they would tell you to do a System Restore to before the Windows Update. If that fixed the problem, then apply the updates one at a time to identify the culprit.
-Jerry

I am unable to turn on location services after the iOS7 update on my iPhone 5

Relatively self explanatory. When I go into Privacy settings I am unable to turn Location Servies on. The option appears, but I cannot slide the switch to 'on'. This has only happened after the ios7 update.

Hi dombew,
Welcome to the Support Communities!
To address this issue, I would suggest restarting and/or resetting the iPhone:
iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/HT1430
If that does not resolve the issue, refer to page 146 in the iPhone User Guide to Reset All Settings:
iPhone User Guide for iOS 7
manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf
Also, check to make sure Location Services has not be restricted:
iOS: Understanding Restrictions (parental controls)
http://support.apple.com/kb/HT4213?viewlocale=en_US
You can prevent changes to privacy settings, including:
Location Services
Cheers,
- Judy

Can't view Picture/Video Gallery After 4.08 Update

So after receiving both updates just a day apart now after the last update (4.08) I can't view my pictures or videos I had saved and even if I take a picture it still says &amp;quot;No Pictures or Videos Found&amp;quot; and I removed my media card 2 check and see if it had erased anything but my pictures and videos are still there, so what could be the problem? Can someone let me know?

Yes it will as i maid the mistake of Doing it and found out the Hard way. All 749 of them including the one's i took of my Aunt that i'll will Never Get back Again. So if you have pictures of your kids or love ones ( DO NOT ) Do The Data Clear I'll REPEATE IT AGAIN DO NOT Do this Or you Will loose your Pictures ... B33
I Would like to Also add By doing This data Clear All music is wiped as Well:
It would've been kind of nice to Have a " F.Y.I " here to let one's know that this can Happen....
I want to add first of all it may have seemed i'm upset! i'm not an this can happen to all of us.
I just want to ask if you give info witch is good as we all can use it. PLEASE PLEASE ! if it's going to erase all important things Let us know as some of us we tend to forget to ask like i did an go ahead an go thru with the Data clear an loose our imprtant stuff that means most to Us..

Unable to import photos in Aperture after iPhoto last update 9.6.1

Hi,
I have no clue if it's related, but after iPhoto last update to 9.6.1, I'm no more able to import photos in Aperture from my Pentax K-50.
Spinning wheel and after that, I get the message that no pictures were imported.
Everything was going fine until that iPhoto update!
Sometimes, it will import 1 picture and then Aperture will crash, saying that it was impossible to import pictures.
I formatted my SD card, but same result.
Any idea why this is happening?
Thanks

See Aperture 3: Troubleshooting basics - Apple and Aperture 3.x: Repairing and Rebuilding Your Aperture Library for detailed information on repairing the library.
Post back if you still have problems. Let us know the error you are getting.
regards

Unable to save pictures.

I try taking a picture and get this message:
Ciphering material does not match this device
My default save location is the media card.
Solved!
Go to Solution.

You have enabled encryption on either the device and/or media card. Unless it's a requirement for your job or you keep very sensitive information on your Media card (why?), turn it off! Simply setting a password on the device is suffice to protect the data on the device, and the Media Card should not have sensitive information.
To turn off device encryption, go to Options --> Security Options --> General Settings, and set Content Protection to Disabled.
Before you turn off encryption on the Media Card, you'll want to try to copy anything on it to your computer - if you can.
To turn off Media Card encryption, go to Options --> Media Card, and set Encryption Mode to None.
Once you've turned off all encryption, you should really reformat the card to clear any encrypted data on it. Go to Options --> Media Card, click the [Menu] button and select Format Card. This will format the card correctly for your BlackBerry.
Jerry

Photo Booth is unable to save picture!

Hello!
Photo Booth was functionning for a year without any problem, but now I get the following error message:
""There was a problem saving the photo file /Users/claire/Pictures/Photo Booth/Photo 1.jpg. This photo cannot be saved.""
I cleared all the images from the Photo Booth library, memory space should not be the problem.
Any ideas?
Thanks,
c
Machine Name: MacBook Pro 15"
Machine Model: MacBookPro1,1
Processor Name: Intel Core Duo
Processor Speed: 1.83 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache (per processor): 2 MB
Memory: 1.5 GB
Bus Speed: 667 MHz
SMC Version: 1.2f10
Machine Name:MacBook Pro 15" Mac OS X (10.4.9)

Ok
The next thing I'd try is another media card
And after that, a device wipe and OS reload using BBSAK.
You will need to use BBSAK or JL_Cmder to wipe the device and subsequently load the OS to the device. Follow the instructions here:
http://www.blackberryfaq.com/index.php/How_do_I_wipe_the_BlackBerry_using_Jl_Cmder%3F
For BBSAK, here is the link: http://bbsak.org/
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

HP Officejet Pro 8600: "unable to connect to my device" after loading full featured

I read the forums and installed the full featured drivers. During installation it asks me to connect to my device using USB cable. I did this, but it doesn't see my device. I tried a different cable, same issue. Both the computer and the printer are on ... I printed a test page wirelessly to make sure the printer was responding. (The wireless printing was working prior to installing the new drivers.)
I am running windows 8 on HP Envy.
I am trying to get it to scan wirelessly and loading the drivers was the answer on the forum. Any suggestions would be appreciated.
Thanks,
Vanya

Hello there, Welcome to the Forums! I hope you enjoy your experience
I noticed your post about your Officejet 8600 not functioning on your Windows 8 system. I would suggest trying to install the printer by using the HP Printer Install Wizard for Windows for starters.
If that method does not work, please follow the next guide very carefully.
'Unable to Find Printer' Error Message Displays on the Computer During a Wireless Network Installati...
I hope my post was helpful!
Thank you for posting Have a great day!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Unable to Save Pictures to Device After 10.2 Update

Similar Messages

Maybe you are looking for