Unable to save pictures.

I try taking a picture and get this message:
Ciphering material does not match this device
My default save location is the media card.
Solved!
Go to Solution.

You have enabled encryption on either the device and/or media card. Unless it's a requirement for your job or you keep very sensitive information on your Media card (why?), turn it off! Simply setting a password on the device is suffice to protect the data on the device, and the Media Card should not have sensitive information.
To turn off device encryption, go to Options --> Security Options --> General Settings, and set Content Protection to Disabled.
Before you turn off encryption on the Media Card, you'll want to try to copy anything on it to your computer - if you can.
To turn off Media Card encryption, go to Options --> Media Card, and set Encryption Mode to None.
Once you've turned off all encryption, you should really reformat the card to clear any encrypted data on it. Go to Options --> Media Card, click the [Menu] button and select Format Card. This will format the card correctly for your BlackBerry.
Jerry

Similar Messages

Unable to Save Pictures to Device After 10.2 Update

After the Verizon update to 10.2, I am unable to save pictures received via MMS to the device. The screen dims like it is going to work, but after a (too long) delay the screen returns to where I was before viewing the picture. On the plus side, it does allow me to share, and after doing this a few times, the suggestion comes up to my email so I can email the pictures to myself and at least I have access to them on my computer.
As expected, my testing shows the same problem with pictures received via BBM and via eMail.
Since the 10.2 update, EVRYTHING runs in super slow motion, and leads an inpatient user to think the phone is hung up. In this case I'm sure that this is an error, not a delay because I have waited and waited for the function to work properly.

Have you tried rebooting the device by removing the battery?
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Have 3.6.15. unable to save pictures that i view on the internet

I have version 3.6.15 and am unable to save pics that I view on the internet. Mainly facebook.

* Download a new copy of the Firefox program: http://www.mozilla.com/firefox/all.html
* Trash the current Firefox application to do a clean (re)install.
* Install the new version that you have downloaded.
Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data.

UNABLE to save pictures to photo album from SMS text

I have the 16GB 3GS, and no e-mail or SMS text that contain pictures can be saved to my photo album. Each time I select save picture, nothing happens. I have restored my iPhone 3 times from back ups and once as "a new phone" loosing all my app settings.

Well, got home and resynced and restored my iphone
When you restored your new phone, did you restore it from the backup of your old phone? If so, that "could" be your problem. Something in your backup could very well be corrupt, thus restoring your problem to your new phone. Why not try restoring your phone as a "new" device in itunes, followed by syncing your content back to your phone. If this solves your issue, that would confirm your old backup is corrupt.

Unable to save pictures automatically

Hello there...i have got some issues while taking pictures as my photos are not getting saved while using the camera....please advise to resolve this asap....

Are you using an app to take pictures or the built in app that came with the phone?

Photo Booth is unable to save picture!

Hello!
Photo Booth was functionning for a year without any problem, but now I get the following error message:
""There was a problem saving the photo file /Users/claire/Pictures/Photo Booth/Photo 1.jpg. This photo cannot be saved.""
I cleared all the images from the Photo Booth library, memory space should not be the problem.
Any ideas?
Thanks,
c
Machine Name: MacBook Pro 15"
Machine Model: MacBookPro1,1
Processor Name: Intel Core Duo
Processor Speed: 1.83 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache (per processor): 2 MB
Memory: 1.5 GB
Bus Speed: 667 MHz
SMC Version: 1.2f10
Machine Name:MacBook Pro 15" Mac OS X (10.4.9)

Ok
The next thing I'd try is another media card
And after that, a device wipe and OS reload using BBSAK.
You will need to use BBSAK or JL_Cmder to wipe the device and subsequently load the OS to the device. Follow the instructions here:
http://www.blackberryfaq.com/index.php/How_do_I_wipe_the_BlackBerry_using_Jl_Cmder%3F
For BBSAK, here is the link: http://bbsak.org/
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

I have an iphone 4ios and recently uploaded the new update. since then i am unable to ssave pictures from say, facebook for example. When i click on the picture and hold it for a moment until the save picture comes up, i hit save, and it does not save

why am i unable to save photos on mu 4ios since i downloaded the recent update?

See my response to your other post.

Unable to save ANY types of files in Elements 5.0

Today I was working with Elements, creating a photomanipulation. This involved several layers, including a background of a beach, a horse, and some text. I've done this before with this exact same program on this exact same computer and not had too many problems. But not today.
Today when I try to save my creation, in ANY format, I get this message:
Could not save as
"C:\Users\User\...\Untitled-1.jpg" because the file is already in use or was left open.
GAHH!!!! Well of COURSE the stupid file is open, I'm working ON IT and trying to save my work!!! If I try to close the file, I get the standard question:
Save changes to the Adobe Photoshop Elements document "Untitled-1" before closing?
to which if I say yes, I get the same old crap:
Could not save as
"C:\Users\User\...\Untitled-1.jpg" because the file is already in use or was left open.
Now if I select save as *PSD or *PDD, *SOMETIMES* it acts like it has saved my work, (Instead of just saying it can't) but when I look for what I saved, all I find are a bunch of crap files that can't be opened. Example:
Cannot open 'C:\Users]User\Pictures\Photo Manips\~ps2AA0.tmp' because it is the wrong type of file.
Please note that I never actually chose to save ANY files called ~ps2aa0.tmp at any point in this process.
So I am stuck in a vicious cycle where before everything was working just fine. And it's not just editing photos or doing manipulations. I can take a brand new blank canvas, scribble a line on it with a paintbrush, and I am completely and totally unable to save even the simplest thing in ANY format whatsoever.
I tried uninstalling Elements and reinstalling it and that did absolutely nothing, except cause me to lose all the special effect brushes I spent hours downloading. And when I started it back up, I was right where I was before, it even had the same custom color preloaded on the palette, as if it did not truly uninstall AT ALL. (Just the special brushes were missing, thanks for nothing!)
My computer is maybe 8 months old now, a nice Hewlitt Packard with Vista. I specifically bought this computer so I could do more things with my art and more photos, and the first thing I loaded on it was the Bamboo tablet by Wacom, which came with Photoshop Elements 5.0 free. I've been using it ever since with hardly a problem and now today, I can't save the simplest little thing, and it is really aggravating me to death.
ANY light that anyone could shed on this would be most appreciated. I'm sure it's something extremely stupid, like I found the secret invisible "do not save anything ever again" button and somehow managed to press it. Whatever it is, I can not for the life of me figure out how to make it work like it's SUPPOSED to work. Somebody please help me before I go stark raving mad.

Further note: I have uninstalled this stupid program now THREE different times, including using a registry cleaner, which then deleted my DVD drive, thankyouverymuch. And even after I got the DVD drive back so I could reinstall the program, it was like I'd never uninstalled it (with the exception of the custom brushes still being missing) right down to the canvas size and paint color I had been using when all this started.
So uninstalling it does nothing, resetting preferences does nothing... I can not save my work, period. I've been fighting with this for about 8 hours and I am so frustrated I could just throttle someone with my bare hands for putting me through this crap.
For a product that came bundled with a $200 graphics tablet, it sure isn't worth a damn. Anybody got any ideas? I'm at my wits' end here.

My Ipod5 wont turn on and it has been telling me for the past 15 weeks that it is unable to save anything to the cloud. Is there any way that I can get my photos back?

So basically, my Ipod5 was working normally earlier today but then the screen just randomly went black and I cant get it to turn on. The problem though, is that for the past 15 weeks, it has been telling me that it is unable to save anything to the cloud due to a lack of space. I don't really care about anything other than my pictures and I'm wondering if there is any way for me to get them back even if my Ipod doesn't work?

Likely not but
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Pse 5 unable to save edits

I have hade pse 5 for several years. All of a sudden, I can't save edits. I get error message, "Unable to save. Computer error." What to do?

Thank you for your response.
I'll reinstall PSE and see what happens. The error message has changed to "an error in the program has occurred." Doesn't state which error, but does lead to the conclusion that reinstalling would be a good idea.
>>> TinkerTinkerUK <[email protected]> 11/2/2009 1:38 AM >>>
Not clear if this problem relates to all edits or just one or two pictures. My suggested acton is
1) use Vista to copy these pictures to somewhere safe (CD/DVD, another computer).
2) make another copy of the picture e.g. copy fred.jpg to fred_xx.jpg; and see if edit works on the new file.
The key thing at the moment must be to save the pictures.
Once the pictures are secure then you can worry about PSE. If the pictures are OK then my next move would be to reinstall PSE5 (this will not have any impact on albums or configurations as you are only reloading the source code)
The fact that you do not have other copies of pictures highlights the need for backups and file management of pictures. My action is always to bring all the pictures (good and bad) from the camera into a picture_download file which is stored on two different hard drives (in my case a separate computer). I then copy the pictures to the Adobe work area and do all the deletions, corrections there. Hence, if disaster strikes, I can always go back to the original.

HT1369 I'm unable to save a copy of photos from website. Please tell me how to repair.

I have been unable to save any photo of pictures from the web. I thought upgrading would have fix the problem, but no luck. Please help me repair for my Ipad and Ipod. Thank you. contact info: [email protected]

What pictures?
What happens when you try?
We are not mind readers, if you want help provide some specifics of the problem.
There is nothing in the limited details to indicate a problem or a need to repair.

Since updating to OS X Yosemite, I am unable to save files into another computer or server. I have to save it on my desktop and then drag it into the server. How do i correct this?

Since updating to OS X Yosemite, I am unable to save files into another computer or server. I have to save it on my desktop and then drag it into the server. How do i correct this?

Ok this worked to solve the error.
Use cmd prompt in windows 7 or 8 and run as admin:
sc config lanmanworkstation depend= bowser/mrxsmb10/nsi
sc config mrxsmb20 start= disabled
No need for all that power shell nonsense as shown elsewhere for windows 8.
That's it. Also force smb2 disabling on the apple side for good measure.
With the above I was able to network mavericks and windows 8.1 pro flawlessly. He issues I had before where I could not read video, ISO and audio files (but could open documents and pictures from the windows machine connected to an apple network share folder went away.

Unable to save the ALV layout variant and display of selection screen on F4

Hi All,
The end user wants to directly select the layout variant (SLIS_VARI). I have used the following code to display the layout variant on selection screen. But, I am unable to save the variant on ALV. Whenever I am trying to select the layout variants (by doing F4 on selection screen) its displaying "No Layout found".
Following is the code for displaying layout variant:
PARAMETERS: p_var TYPE slis_vari.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_var.
PERFORM f4_variant CHANGING p_var.
FORM f4_variant CHANGING c_variant TYPE slis_vari.
DATA: ls_variant TYPE disvariant,
            l_exit     TYPE char1.
ls_variant-report = sy-repid.
CALL FUNCTION 'REUSE_ALV_VARIANT_F4'
    EXPORTING
      is_variant = ls_variant
      i_save     = 'A'
    IMPORTING
      e_exit     = l_exit
      es_variant = ls_variant
    EXCEPTIONS
      not_found = 2.
IF sy-subrc = 2.
    MESSAGE ID sy-msgid TYPE 'S' NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
    IF l_exit EQ space.
      c_variant = ls_variant-variant.
    ENDIF.
ENDIF.
ENDFORM.                    " f4_variant
and following is the code for displaying the ALV:
FORM edition_alv.
ws_variant2 = ls_variant.
* Call ALV editor in list mode
IF p_list = 'X'.
    CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
      EXPORTING
        i_callback_program      = ws_extract1-report
        i_callback_user_command = ws_user_command
        is_layout               = ws_layout
        it_fieldcat             = wt_fieldcat
        it_sort                 = wt_sort
        i_save                  = 'A'
        is_variant              = ws_variant2
        it_events               = wt_events[]
      TABLES
        t_outtab                = wt_edition.
* Call ALV editor in grid mode
ELSE.
    CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
      EXPORTING
        i_callback_program      = ws_extract1-report
        i_callback_user_command = ws_user_command
        it_fieldcat             = wt_fieldcat
        it_sort                 = wt_sort
        i_save                  = 'A'
        is_variant              = ws_variant2
        it_events               = wt_events[]
      TABLES
        t_outtab                = wt_edition.
ENDIF.
ENDFORM.
I am not sure whats going wrong, but I am unable to save variants.
Please help.
Thanks,
Vishal.

The F4 will display you the existing layouts only. So you need to save the layout first & then execute the report again & check if you are getting F4 values for that field.
The Layout needs to get stored with variant.
Regards,
Mahesh

Unable to save data entered in editable field of IW37N output

Hi Gurus,
I have made one of the fields in IW37N ALV output as editable using exit IWOC0004. When I enter the values in the field, I am unable to save the data to the order. The orders are getting successfully released but the values entered are not saved in database. Please help.
Thanks,
Pramod.V

Discovered that the problem was with the Adobe version. Updated version to 8.1.1 and installed Active X control software and things started working.

Unable to save data in record working time

Hi All,
I am working on ESS portal , when I try to record & save working time in portal , it throw an error message as 'Unable to save data'.
Can you plz assist me on this.
Usefull answers will be awarded.
Thanks,
Nilima

Hi ALL,
I'm too facing the same problem....usefull answers will be awarded.

Unable to save pictures.

Similar Messages

Maybe you are looking for