Unable to save the message mapping

Hi..
I have completed the Message Mapping. when i am trying to save the Message Mapping i am getting the Error while executing save "The length 0 of the array ' Sorted Function keys' is not equal to the number of 1 functions".
can you pls suggest me, how can i rectify this type of strange error.
Regards,
Prasad

Hi,
that means that one of your Sorted Functions does not have correct input
as the error says
you probably placed it in a wrong way - check the functions
desciption on help.sap.com or an example on SDN blogs
and correct it - then it will work
Regards,
Michal Krawczyk

Similar Messages

How can i stop an error message that comes up when i am using word? the error message is "word is unable to save the Autorecover file in the location specified. Make sure that you have specified a valid location for Autoreover files in Preferences,-

how can i stop an error message that comes up when i am using word? the error message is "word is unable to save the Autorecover file in the location specified. Make sure that you have specified a valid location for Autoreover files in Preferences,…"

It sounds like if you open Preferences in Word there will be a place where you can specify where to store autorecover files. Right now it sounds like it's pointing to somewhere that doesn't exist.

Unable to save the ALV layout variant and display of selection screen on F4

Hi All,
The end user wants to directly select the layout variant (SLIS_VARI). I have used the following code to display the layout variant on selection screen. But, I am unable to save the variant on ALV. Whenever I am trying to select the layout variants (by doing F4 on selection screen) its displaying "No Layout found".
Following is the code for displaying layout variant:
PARAMETERS: p_var TYPE slis_vari.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_var.
PERFORM f4_variant CHANGING p_var.
FORM f4_variant CHANGING c_variant TYPE slis_vari.
DATA: ls_variant TYPE disvariant,
            l_exit     TYPE char1.
ls_variant-report = sy-repid.
CALL FUNCTION 'REUSE_ALV_VARIANT_F4'
    EXPORTING
      is_variant = ls_variant
      i_save     = 'A'
    IMPORTING
      e_exit     = l_exit
      es_variant = ls_variant
    EXCEPTIONS
      not_found = 2.
IF sy-subrc = 2.
    MESSAGE ID sy-msgid TYPE 'S' NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
    IF l_exit EQ space.
      c_variant = ls_variant-variant.
    ENDIF.
ENDIF.
ENDFORM.                    " f4_variant
and following is the code for displaying the ALV:
FORM edition_alv.
ws_variant2 = ls_variant.
* Call ALV editor in list mode
IF p_list = 'X'.
    CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
      EXPORTING
        i_callback_program      = ws_extract1-report
        i_callback_user_command = ws_user_command
        is_layout               = ws_layout
        it_fieldcat             = wt_fieldcat
        it_sort                 = wt_sort
        i_save                  = 'A'
        is_variant              = ws_variant2
        it_events               = wt_events[]
      TABLES
        t_outtab                = wt_edition.
* Call ALV editor in grid mode
ELSE.
    CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
      EXPORTING
        i_callback_program      = ws_extract1-report
        i_callback_user_command = ws_user_command
        it_fieldcat             = wt_fieldcat
        it_sort                 = wt_sort
        i_save                  = 'A'
        is_variant              = ws_variant2
        it_events               = wt_events[]
      TABLES
        t_outtab                = wt_edition.
ENDIF.
ENDFORM.
I am not sure whats going wrong, but I am unable to save variants.
Please help.
Thanks,
Vishal.

The F4 will display you the existing layouts only. So you need to save the layout first & then execute the report again & check if you are getting F4 values for that field.
The Layout needs to get stored with variant.
Regards,
Mahesh

How to use the variables used in the message mapping

Hi ,
In the message mapping we can declare variables in the JAVA section , these variables could be used across the mapping .
I have tried using it but I am unable to retrieve the values assigned to the variables in one UDF into the another UDF .
Please guide me how to use the variables declared in the JAVA section in the message mapping .
Thanks
Anita Yadav

Anita,
I have worked on the Global variables and i found no issues. Make sure that the variable is declared in the Declaration Section and then initlaized in the Initialization section.
If you declare a variable in the Declaration Section ,
int i;
then in any udf you can use if directly. No need to re declare the variable in the UDF. If you do this, then it becomes a local variable.
Regards,
Bhavesh

Error while creating task: The server was unable to save the form at this time. Please try again. (SharePoint 2013)

I get the following error while saving a task inside task list:
"The server was unable to save the form at this time. Please try again."
I tried restarting "search service host controller".
The server has 8 GB RAM and according to task manager, 6.67 GB is being used.
I logged into the site with user which is the owner of the site. I tried creating tasks from client as well as the SharePoint server itself. Same error is shown in both the cases.
How do I find information on the exact problem that is causing the error? What are possible solutions?

Hi robikshrestha,
This error message often shows when there is low memory that can be used, the workaround restart the “SharePoint Search Hosting Controller” service is to release some memory, and make it work. Whether restart the service release memory
in your situation?
Would you please check whether this issue happens all the time in task list, or happens sometimes when the memory is lower to use. If it doesn’t have a large impact, you can restart the server, check the result. have a look at the event
log and ULS log, see whether there is related information.
If it happens all the time, would you please use other browsers, whether the results are same? This may be caused by some add-ons in IE, like Free Download Manager I have seen.
Thanks,
Qiao Wei
TechNet Community Support

Java.io.IOException: unable to find the type mapping resource file

Hi,
I am using weblogic7.0 to deploy my applications. I wrote a web service and
was able to deploy it sucessfully. I am trying to access the web service through
a jsp page. I am the error posted below on my server and " error:505 internal
server error" on the browser. Can any one please help me out with the problem.
My jsp page just displays the float value i am returing from the session bean
method.
Thanks,
Ramya.
<Apr 14, 2003 4:32:51 PM PDT> <Error> <HTTP> <101019> <[ServletContext(id=64204
55,name=bankwebapp,context-path=/bankwebapp)] Servlet failed with IOException
java.io.IOException: unable to find the type mapping resource file for:bank.Ban
kService
at weblogic.webservice.core.encoding.DefaultRegistry.<init>(DefaultRegi
stry.java:62)
at weblogic.webservice.core.rpc.ServiceImpl.<init>(ServiceImpl.java:72)
at bank.BankService_Impl.<init>(BankService_Impl.java:23)
at jsp_servlet.__getbal._jspService(__getbal.java:106)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.ru
n(ServletStubImpl.java:1058)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubI
mpl.java:401)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubI
mpl.java:445)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubI
mpl.java:306)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationActi
on.run(WebAppServletContext.java:5412)
at weblogic.security.service.SecurityServiceManager.runAs(SecurityServi
ceManager.java:744)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppS
ervletContext.java:3086)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestI
mpl.java:2544)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:153)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:134)
>
<Apr 14, 2003 4:40:59 PM PDT> <Notice> <Application Poller> <149400> <Activatin
g application: appsdirbankwebapp_war>
<Apr 14, 2003 4:40:59 PM PDT> <Notice> <Application Poller> <149404> <Activate
application appsdirbankwebapp_war on myserver - Running>
<Apr 14, 2003 4:41:01 PM PDT> <Notice> <Application Poller> <149404> <Activate
application appsdirbankwebapp_war on myserver - Completed>
The url value from the jsp page ishttp://localhost:7001
The wsdl value from the jsp page ishttp://localhost:7001/web_services/BankServi
ce
<Apr 14, 2003 4:41:06 PM PDT> <Error> <HTTP> <101019> <[ServletContext(id=72463
20,name=bankwebapp,context-path=/bankwebapp)] Servlet failed with IOException
java.io.IOException: unable to find the type mapping resource file for:bank.Ban
kService
at weblogic.webservice.core.encoding.DefaultRegistry.<init>(DefaultRegi
stry.java:62)
at weblogic.webservice.core.rpc.ServiceImpl.<init>(ServiceImpl.java:72)
at bank.BankService_Impl.<init>(BankService_Impl.java:23)
at jsp_servlet.__getbal._jspService(__getbal.java:106)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.ru
n(ServletStubImpl.java:1058)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubI
mpl.java:401)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubI
mpl.java:445)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubI
mpl.java:306)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationActi
on.run(WebAppServletContext.java:5412)
at weblogic.security.service.SecurityServiceManager.runAs(SecurityServi
ceManager.java:744)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppS
ervletContext.java:3086)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestI
mpl.java:2544)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:153)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:134)
>

Hi Manoj,
Thanks a lot for your hepl. I tried as you said and its working now.
Ramya
"manoj cheenath" <[email protected]> wrote:
Make sure that you put the client jar file generated by
clientgen in the lib directory of the jsp web app.
It looks like the runtime is unable to load
<service>.xml type mapping file. This xml file
should be in the classpath (web-inf/lib or
web-inf/classes).
-manoj
"Ramya" <[email protected]> wrote in message
news:[email protected]...
Hi,
I am using weblogic7.0 to deploy my applications. I wrote a web serviceand
was able to deploy it sucessfully. I am trying to access the web servicethrough
a jsp page. I am the error posted below on my server and " error:505internal
server error" on the browser. Can any one please help me out with theproblem.
My jsp page just displays the float value i am returing from the sessionbean
method.
Thanks,
Ramya.
<Apr 14, 2003 4:32:51 PM PDT> <Error> <HTTP> <101019><[ServletContext(id=64204
55,name=bankwebapp,context-path=/bankwebapp)] Servlet failed withIOException
java.io.IOException: unable to find the type mapping resource filefor:bank.Ban
kService
atweblogic.webservice.core.encoding.DefaultRegistry.<init>(DefaultRegi
stry.java:62)
atweblogic.webservice.core.rpc.ServiceImpl.<init>(ServiceImpl.java:72)
at bank.BankService_Impl.<init>(BankService_Impl.java:23)
at jsp_servlet.__getbal._jspService(__getbal.java:106)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
atweblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.ru
n(ServletStubImpl.java:1058)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubI
mpl.java:401)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubI
mpl.java:445)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubI
mpl.java:306)
atweblogic.servlet.internal.WebAppServletContext$ServletInvocationActi
on.run(WebAppServletContext.java:5412)
atweblogic.security.service.SecurityServiceManager.runAs(SecurityServi
ceManager.java:744)
atweblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppS
ervletContext.java:3086)
atweblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestI
mpl.java:2544)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:153)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:134)
>
<Apr 14, 2003 4:40:59 PM PDT> <Notice> <Application Poller> <149400><Activatin
g application: appsdirbankwebapp_war>
<Apr 14, 2003 4:40:59 PM PDT> <Notice> <Application Poller> <149404><Activate
application appsdirbankwebapp_war on myserver - Running>
<Apr 14, 2003 4:41:01 PM PDT> <Notice> <Application Poller> <149404><Activate
application appsdirbankwebapp_war on myserver - Completed>
The url value from the jsp page ishttp://localhost:7001
The wsdl value from the jsp page
ishttp://localhost:7001/web_services/BankServi
ce
<Apr 14, 2003 4:41:06 PM PDT> <Error> <HTTP> <101019><[ServletContext(id=72463
20,name=bankwebapp,context-path=/bankwebapp)] Servlet failed withIOException
java.io.IOException: unable to find the type mapping resource filefor:bank.Ban
kService
atweblogic.webservice.core.encoding.DefaultRegistry.<init>(DefaultRegi
stry.java:62)
atweblogic.webservice.core.rpc.ServiceImpl.<init>(ServiceImpl.java:72)
at bank.BankService_Impl.<init>(BankService_Impl.java:23)
at jsp_servlet.__getbal._jspService(__getbal.java:106)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
atweblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.ru
n(ServletStubImpl.java:1058)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubI
mpl.java:401)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubI
mpl.java:445)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubI
mpl.java:306)
atweblogic.servlet.internal.WebAppServletContext$ServletInvocationActi
on.run(WebAppServletContext.java:5412)
atweblogic.security.service.SecurityServiceManager.runAs(SecurityServi
ceManager.java:744)
atweblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppS
ervletContext.java:3086)
atweblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestI
mpl.java:2544)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:153)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:134)
>

Preflight keeps saying "Unable to save the PDF File after post processing"

I'm at a loss how to overcome this. Spent almost a whole day, together with another person, trying to fix it with no success!
I use Adobe pro CC on a PC
I usually receive pdf files from this one client who edits and formats a book in Mac Pages. Up until a few days ago I had no problems converting the client's pdfs into pdf/x3, but the last three versions of the latest file have stumped me.
Just to test, I first just tried to convert the file (33MB), unchanged, to pdf/x3 using the save as other option - message reads "the document has been saved, however, it could not be converted according to the selected standard profile: convert to PDF/X. Please use preflight with the profile "Convert to PDF/X" in order to identify those properties of the document which prevent it from being compliant to this profile"
if I then choose under Profiles - convert to PDF/X3 - it says no problems found, and appears to have saved the file. If I try to save again as a pdf/x3, just to make sure, it then tells me it's not pdf/x3 compliant
OK - so then I go back to preflight - and choose the standards function - then pdf/x3, then continue with the default colour profile. About halfway through the conversion, at the point of saving the file, I get the message "unable to save the pdf file after post processing"
So far I've had no luck figuring out what this is.
I then choose the option of "verify compliance of ppdf/x3" - message reads "pdf/x3 version key (GTS_PDFXVersion) missing", and "Trapped key not true or false"
Help!! How can I be sure the file converted / or not?
kim

Yes I was/am aware of Preflight's inability to play nicely over cloud technologies in certain cases, especially wrt Standards technologies, this will be partially addressed in an upcoming version of Preflight without saying too much. But the same thing could theoretically have happened if the file was also located on another local network client or server. Leaving aside the argument that this may violate the Acrobat User Agreement - since purchasing the software, the user agrees to employ its functionality on a single host system and precludes host-client-based scenarios - this simply is not a supported use, meaning the user may not have expectations that it will work at all, if the applications requirements are not observed. There do exist server-solutions for Preflight files within networks, but Acrobat and by extension Acrobat Preflight is not one of those solutions, and (still) belongs in the single host-based desktop environment.
However most (99.9%) functions within Acrobat <-> acrobat.com file exchange are supported, file syncing across multiple devices will soon be supported, but Standards compliance is still admittedly a problem at this point. Some testing has been done using 3rd party cloud technologies starting with enterprise-based solutions, such as Office 365, and this will continue to ramp up to include other 3rd party products.
As for the second point, Preflight will usually change the PDF version to be complaint, are you saying that it was unable to do so in this case? It seems that this error should have popped up during the normal Preflight conversion attempt. Personally I think solving a workflow problem using the print path is a little bit of a heavy-handed approach, but if helped and the results are acceptable, then that is good. Since that path is non-existent on a Mac, as one needs to Save as Adobe PDF from the Print dialog's PDF drop-down menu, I am assuming your workflow involved file creation on a Mac, then further processing on Windows using the PDF printer. I am wondering if a simple resave/Save As... to PDF with overwrite on a Mac, or Preflighting the file using a PDF version compatibility profile before the PDF/X conversion would have helped. Since there are such a multitude of methods that a PDF can be created, there are also many ways within Acrobat that a user can shape the file to be compatible with the expected workflow, ie, 'many ways to skin a cat', without being morbid.

The server was unable to save the form at this time. Please try again

Having created a new custom list (even with only a text field) I am unable add new items to the list - the error message is Unexpected
response from server. The status code of response is '0'. The status text of response is ''. when in 'quick edit'.
If I try to add or modify an item in the list by clicking 'add new item' I get "The
server was unable to save the form at this time. Please try again."
I have restarted the Sharepoint Search Host Controller server but to no avail. I have 24Gb RAM for this server so it's not a
memory issue (8Gb available). I have also tried from various browsers including Chrome and Safari - still the same error message.
This error only occurs on lists. I can edit document properties in a library and have no problems with calendar entries.
There are no entries in the event viewer, so where do I need to begin looking to find out what is (or rather is not) happening?

One thing I noticed in SP 2013 is that if your list has unique permissions and a user/group has permissions only on that list and has limited or no access at the site level, then you run into this error: "The server was unable to save the form at this time.
Please try again."
This can be resolved by either giving that user/group atleast read access at the site level or in my case I had to create a new permission set (since we cant update limited access permission set) which is same as limited access but with the additional permission
of "Use Remote Interfaces - Use SOAP, Web DAV, the Client Object Model or SharePoint Designer interfaces to access the Web site."
I am not sure if this is a bug or as per design, but not allowing a user who has needed permissions at the list level but limited access at site level doesnt seem right. Never ran into this issue in prior version of SharePoint. I tested and this additional
permission doesnt seem to violate any security at site level. But implement this at your risk. No guarantees provided and not responsible for any issues with this implementation if any.

Help!! - "The HP Scan Application was unable to save the file to the specified location."

New OJ6830, latest HP software installed on Win7 64 bit.
HP Scan scans and displays the scanned pages. But, when I try to save the file as a pdf or tiff, I get the following error message:
"The HP Scan Application was unable to save the file to the specified location."
BTW, I have tried running the app as Administrator and have disabled my antivirus software.
Why won't the HP scan app save the file? Has anyone else seen this error message?
Is there anything else I can do, or this this just a major bug in HP scan software?

Mike,
One Idea:
Make sure you have "San Preview" checked else the software will not accept "specified location".
Reference:
Save Scan to Specified Location
Click the Kudos Thumbs-Up to say Thank You!
And...Click Accept as Solution when my Answer provides a Fix or Workaround!
I am pleased to provide assistance on behalf of HP. I do not work for HP.
Kind Regards,
Dragon-Fur

I am unable to save the contacts in my iPhone 5s?

Dear Sir,
I am unable to save the contacts to my iphone 5s?

My system info:
MacBookPro 8,1
Version 10.7.5
Processor 2.8 GHz
Memory 4GB
I have discovered that the movie I was TRYING to save was in fact actually saved into my documents. When I started the action to save the movie, I saw that it would take 3 hours. So I left my MBP to allow the saving action to be performed. When I came back to my MBP 4 hours later, there was an error mesage. Unfortunately out of frustration, I did not note the message. I do know however that I was having "freezing" issue during my editing of the movie. Two days ago, I was actually in an Apple Store with a "trainer" using imovie and it froze up while with the trainer...the trainer referred to an Apple Store "genius" technician onsite. The genius suggested testing the ram on the system to insure it was functioning properly...I will have this done soon.
So I just assumed the error message was someting related to a ram issue and therefore prohibited the ability to save the movie...
Anyway...it appears my issue with saving the movie is resolved.
Thank you!

Unable to save Unified Messaging PIN: Access to Active Directory Failed

I'm trying to enable all of our users for Unified Messaging and I've created a powershell script for each of users I want to enable but I am getting an error message everytime I try and run it.
Unable to save Unified Messaging PIN for mailbox 'smtp address': Access to Active Directory Failed
Our setup is forest root domain and 2 child domains. Most of the users are in the child domains and the Exchange server is in the forest root domain.
I'm using -domaincontroller but this doesn't make a difference. Here is the script I am using:
Enable-UMMailbox -Identity [email protected] -UMMailboxPolicy "DefaultUM Default Policy" -Extensions 303 -PIN 1234 -SIPResourceIdentifier "[email protected]" -PINExpired $false -domaincontroller "rc-curdc-01.curriculum.riddlesdown.local"
Can someone point out why this isn't working?

I had the same experience as Gueetar. Couldn't enable a UM mailbox, or change the PIN. Got a generic "Access to Active Directory Failed" message instead of anything useful. Even went so far as enabled a ton of diagnostic logging, which didn't report anything
useful.
Of course, all the accounts I was enabling had the HiddenFromAddressListsEnabled property set to $true (these were old deactivated accounts I was using to test with). I found that setting it back to $false corrected the issue.
Of course I didn't know it was that exact problem at the time. I only found a difference after disabling/re-connecting mailboxes (and of course newly created mailboxes exhibited no issues). Assuming this was going to be the case for all mailboxes this would
be fine for testing and proof of concept, bad for production/implementation. Instead I ran a bunch of scenarios over two days, culminating in a crap load of LDIFDEs and DSACL dumps to enumerate the object properties and compare the values that were different.
This property (HideFromALEnabled) and a few others stood out. Luckily it wasn't ACL-related - that would've been a complete head wreck!
Dear Microsoft: More descriptive errors next time, please :)

"The HP scan application was unable to save the file to the specified location. "

I can copy and print from my computer but when I try to save the scan I get an error message saying the HP app was unable to save the file to the specified location. I reloaded the cd and that did not help.

Hello jerlip, Welcome to the HP Forums. I see that you are having an issue when attempting to save a scan. I suggest that we try running the HP Print and Scan Doctor. If you see any error codes or messages, please let me know what they are. Write me back when you have time and I will be happy to research other options if needed. Cheers,

My computer hardware crashed, therefore, I unable to save the music that I had imported from a CD but it is on my IPOD. How do I transfer the music to my new computer?

My old computer crashed and I was unable to save the music files that I had imported using CDs but I have the music on my IPOD touch. How can I transfer the music from my IPOD without haveing to import the CDs again? My purchases have been transferred with no problem. Thank you

Try the shareware Phone to PC.

I am unable to Save the "Note" field while Creation of new Contact

Hi ,
I am unable to save the Note field while Creation of Contact in Web UI.
Its happening in the Dev system but not in the QA Web UI.
I have tried to debug the component BP_CONT, But no use.
Can any one tell me the what could be the problem?
Regards,
DN

Hi DN,
The Notes part comes from the following view:
BP_DATA/Notes (Context Node: NOTES; Attribute: TDLINE)
You can debug in this view.
It could also be a case of missing authorization - the entered text don't get saved when the user does not have authorization to save text in text objects. Please check.
Regards,
Shiromani

I am in New Zealand and when I type up a rather long email to send back home, the send button does not light up by the time I finish and I cannot send the email and can't seem to save the message or anything and then as soon as I touch a button, poof, gon

Can anyone tell me why when I type a very long email, the send button is not highlighted anymore when I am done and I can't send the message? And I can't seem to save the message or anything and as soon as I touch a button, I lose the whole thing. Any suggestions?

Have you tried typing and saving using Notes or word processing Apps before sending message?

Unable to save the message mapping

Similar Messages

Maybe you are looking for