Unable to save Time Buckets Profile for SNI

I am getting this weird behavior with the Time Buckets Profile in SNI.
Whenever I Edit and Save the changes, the Time Bucket Profile reverts back to Years 0000, Months 0000, Weeks 0000 and so on.
I am using SCM 7.0 with the SP 06.
I have maintained the necessary Visibility Profiles for the relevant applications.
It was working until a couple of days and stopped from today. We recently added a custom view under SNI Details.
Any thoughts?
Kedar

Amit
this is not a Time bucket profile but a storage bucket profile
you cannot create or maintain it... its standard SAP structure for storing data in technical buckets
the use of this bucket is in interactive planning book if you want to see how the data is stored(which you seem to have used). This is useful , say, in explaining how the weeks overlapping two months has got the quantity. Again this is a temporary setting and cannot be saved in the planning book
SCM5.0 makes this a bit accessible by giving this as an option in the drop down icon for "period settings"
for a related thread see
Weekly Buckets Incorrectly Split into incomplete weeks!?!?

Similar Messages

Key figure display in planning book with respect to Time bucket profile

Hi,
I am loading a key figure to planning area from the info cube for the current month. When I review the key figure in planning book with monthly time bucket profile it shows 85 for the current month. In the same planning book with weekly bucket profile, it shows 55 from the current week and future weeks and the remaining 30 goes into the past weeks of the current month.
How to make the total quantity 85 to show in the current and future weeks only.
thanks and regards
Murugesan

Hi Murugesan,
Within the Planning Area, the data is stored at the lowest level granularity that you maintain in storage bucket profile. Then during display, system will decide what data to show depending on what kind of time bucket profile you use in the planning view, and the time based disaggregation that you maintain for Key Figure.
In this below case, what time characteristic do you have in cube? Is it date, week or month?
If it's date, check how much KF data is maintained on the dates which belong to week which has days both in this month/last month e.g. if I talk about Dec 2011, how much data is stored 1,2,3 & 4 th of Dec, 2011.
This data would appear in Dec in monthly view, but in week, it would appear in the week starting 28th November.
If data is maintained in cube in weeks, then you need to calculate how time based disaggregation would show it to you in months.
If it's months, then you would need to find out how much data would go to the days in the past week of the month.
The time based disaggregation may be causing you some issues, but in that case, I would not expect 30 out of 85 to go in the past week, unless you have data in cube in days.
Data shown in weekly view for week starting 28th Nov should ideally be a small proportion of 85, unless you are using a time stream/fiscal year variant, due to which most of December is in holidays. The only other exception I can think of is that you have data in teh days mentioned above.
It would be best to help the business understand this disaggregation logic, rather than thinking of manipulating the data to shift to a later week.
If this logic doesn't explain your situation, then please provide the date/week/month at which you have data in cube, and what quantity.
Thanks - Pawan

Invalid time buckets profile reference

Hi :
I am getting fololowing error while loading data in planning book : " Invalid time buckets profile reference", and unable to laod any data to planning book
I have already done consistency check , initailised version , checked time bucket profile , storage bucket profile , and those are fine .There are no time stream id defined either .

Hi Virendra,
Check whether your time bucket profile falls same under storage bucket profile. I mean, check your fiscal year variant in storage bucket profile as well as in Time bucket profile. becz you have assigned the storage bucket profile to planning Area, which having fiscal year variant & if you are using different fiscal year variant in Time bucket profile, this mentined error will appear.

Trying to load music to ipod, getting "windows - write delayed fail unable to save all the data for th E: etc

trying to load music from itunes to my ipod classic message rec'd WINDOWS - WRITE DELAYED FAILED UNABLE TO SAVE ALL THE DATA FOR THE E: THE DATA WAS LOST
is this my ipod or an itunes problem?

I spoke to ipod tech support and was told "We do not support itunes. It is only a web based support" Which apparently does not exist.

Unable to save changes in console for a custom security provider

I built a custom security provider and dropped it in the mbeantypes folder. This gets picked up by weblogic. I then try to modify the control flags and make it SUFFICIENT. I reboot the server but when i log back in the control flag is reset to OPTIONAL. It not saving the data to the xml file. We are running it on a UNIX box.

Hi,
I solved the problem by myself.
The log area was at 100%, that's why the configtool wasn't able to save my changes.
Now I changed the backup properties for the log files to AutoLog (in the Backup Wizard) and it works fine.
Best regards,
Christian

Time bucket not displaying in planning book

When I opened planning book, the time bucket is not displaying as it used to be. I tried to select CVC to be displayed in the planning book and got the following error message:
@5C\QError@ Insufficient information about read period transferred
@5C\QError@ Error reading data - Planning book cannot be processed further
Insufficient information about read period transferred
Message no. /SAPAPO/TSM231
This internal error should not occur during normal processing. However if this message is displayed, contact your system administration or the SAP hotline quoting the message number.
Any idea what went wrong?

Hi Nic,
Either someone deleted the time bucket profile, or else the periodicities in the time bucket profile are not in line with the periodicity allowed in your planning area.
Go to Advanced Planning and Optimization-> Demand Planning -> Environment -> Current Settings -> Maintain Time Buckets Profile for Demand Plng and Supply Network Plng, or directly use the tcode "/SAPAPO/TR30".
Check that your time bucket profiles ZDP_PBP_9Q & ZDP_PBP_5Q exist by using F4 help, and also select them to see what periods are used in the time bucket profile e.g. weeks, days, etc.
If you don't find the time bucket profile, then they need to be created (based on names, my guess is that *9Q will contain 9 quarters, and *5Q will contain 5 quarters). I expect that issue lies here itself.
If time buckets profile exist, then check the following:
1) Go to /sapapo/msdp_admin, select your planning area. See the storage bucket profile name in the "info" tab.
2) Go to /SAPAPO/TR32 (Periodicities for Planning Area). Give the name of the Storage bucket profile that you see in 1.
3) Check what periods are used in storage bucket profile.
4) Storage bucket profile needs to have lower periods maintained than the time bucket profile. e.g. assuming that your time bucket profile has quarters, then you need to have at least quarter maintained in storage bucket profile. Even if you have day or week or month selected in storage bucket profile, it's ok because these are smaller periods than quarters what you have in time bucket profile.
Also make a note if "post period" is checked. Note the name of "fiscal year variant" if that is maintained along with this tick. I hope you don;t need to go further but if above don;t resolve your issue, then we need to check the fiscal year variant.
Thanks - Pawan

ISE: time profile for authenticated usergroup access

Hi forumers'
I would like to setup a session condition like what ACS can do. This is using for the user after authentication, then they were authorize with the time allotment profile for them to accessing the resources on the network.
Can i do this over ISE, beside guest manamgent > sponsor group's time profile?
What if current ISE not ready for this, how's the high level design would be for time profile for usergroup access look like?
Example
a. trusted full time employee, accessbile 24x7x365
b. not confirm, internship employee, with only accessbile right of 8x5 per day
Thanks
Noel

Thanks for the reply, but I'm really seeking the feature of prevent multiple self registration for the same user, and I don't think that it is available right now.
The only working idea here is blocking the MAC address for the machine doing the registration because everytime the user will be able to register with new email address or mobile phone.
Also one feature can be interested here, that the user can do self registration with Phone mandatory so the ISE will send SMS to the user with the credentails to use.
Thanks.
Ahmad.

Copy Key figure data between two planning area with different storage bucket profile

Hi,
I have a DP planning area ' PA1' with monthly storage bucket profile data view 'PA1M' ( monthly TBF) and I want to copy the data to another planning area 'PA2' whose storage bucket is weekly. This would need me to write a custom program which will split monthly to weekly and then populate 'PA2'.
However, In 'PA2', I created two data views 'PA2W' (with weekly time bucket profile) and 'PA2M' (with Monthly Time bucket profile). If I am able to copy the data from PA1 (PA1M) to PA2(PA2M), it will automatically splits monthly to weekly in PA2W.
So my question is if there exists a way I can copy key figure data from PA1M to PA2M? Any BAPI?

Hi Rakesh,
You can use COPY/Version Management Function to do this.
Path: Demand Planning > Environment >Copy/ Version Management
The system takes into account only those periodicities that are common to both planning areas.
For example, if the data is saved in months in the source planning area (PA1) but in months and weeks in the target planning area (PA2)
the system copies to months in the target planning area and then Disaggregates the data to the storage buckets in accordance with the Time-based Disaggregation.
hope this wil help to understand the basic concept.
Kapil

Unable to save Unified Messaging PIN: Access to Active Directory Failed

I'm trying to enable all of our users for Unified Messaging and I've created a powershell script for each of users I want to enable but I am getting an error message everytime I try and run it.
Unable to save Unified Messaging PIN for mailbox 'smtp address': Access to Active Directory Failed
Our setup is forest root domain and 2 child domains. Most of the users are in the child domains and the Exchange server is in the forest root domain.
I'm using -domaincontroller but this doesn't make a difference. Here is the script I am using:
Enable-UMMailbox -Identity [email protected] -UMMailboxPolicy "DefaultUM Default Policy" -Extensions 303 -PIN 1234 -SIPResourceIdentifier "[email protected]" -PINExpired $false -domaincontroller "rc-curdc-01.curriculum.riddlesdown.local"
Can someone point out why this isn't working?

I had the same experience as Gueetar. Couldn't enable a UM mailbox, or change the PIN. Got a generic "Access to Active Directory Failed" message instead of anything useful. Even went so far as enabled a ton of diagnostic logging, which didn't report anything
useful.
Of course, all the accounts I was enabling had the HiddenFromAddressListsEnabled property set to $true (these were old deactivated accounts I was using to test with). I found that setting it back to $false corrected the issue.
Of course I didn't know it was that exact problem at the time. I only found a difference after disabling/re-connecting mailboxes (and of course newly created mailboxes exhibited no issues). Assuming this was going to be the case for all mailboxes this would
be fine for testing and proof of concept, bad for production/implementation. Instead I ran a bunch of scenarios over two days, culminating in a crap load of LDIFDEs and DSACL dumps to enumerate the object properties and compare the values that were different.
This property (HideFromALEnabled) and a few others stood out. Luckily it wasn't ACL-related - that would've been a complete head wreck!
Dear Microsoft: More descriptive errors next time, please :)

How can I extract and save a color profile from an existing file?

I've been give a tiff file with an embedded color profile from a customer. I want to be able to save that color profile for future use. I've tried various methods with no success.

I've tried various methods with no success.
And those were...? You need to be specific. Generally though one would simply install the profile file rather than jump hoops to extract it from an image, where it may be incomplete or lack other critical info like other profiles or specific printer or monitor information it may reference.
Mylenium

Save time-dependent color in u3d/pdf file

Hi all,
I am wondering if there is a way in Acrobat professional extended that allows me to save time-dependent color
for a solution of FEM analysis. The color is also spatial dependent.
I know there is "3D capture tool" that can save spatial dependent color but I would like to show the solution
in an animated way.
Thanks,
Mengda

Hello Mengda,
Any news on that subject ?
Best Regards
William Gallego
A3D QE Team

Microsoft Office 2004 (Word) unable to save files I have been running Office 2004 on my Intel iMac with Snow Leopard for some time and all of a sudden I cannot save a document. Word just stopped responding and I have to force quit. I can open Word and cr

Microsoft Office 2004 (Word) unable to save files
I have been running Office 2004 on my Intel iMac with Snow Leopard for some time and all of a sudden I cannot save a document. Word just stopped responding and I have to force quit. I can open Word and create a new document but I cannot save it. I reinstalled Word but that didn’t help. Then went to the Internet and found at least one other Mac user having the same problem which it suggests is caused by a recent Mac Security Update:
http://answers.microsoft.com/en-us/mac/forum/macoffice2004-macword/word-2004-wil l-not-open-or-save-documents/b04eb870-9b0d-4f3b-bb47-b122301e36f6
So I check for a new Mac Security Update and sure enough there was one. I downloaded it and now Word seems to be working, as it should. I can both open and save files. The only problem remaining is that when I open Word I get the following error message “An unexpected error occurred while trying to load the Microsoft Framework library”. I contacted Apple but they were unable to help.
How can I get rid of this error message?

Look, I realize you might have to get your machine working, so this is how you revert back.
Restore proceedure to pre-Security Update 2012-001 v 1.0 & v 1.1
#1 Backup your personal data off the machine.
Backup files off the computer (not to TimeMachine). If you don't have a external drive, get one and connect to the USB/Firewire port and simply drag and drop copy your User folder to the external drive, it will copy all your files. It's best to have two backups of your data off the machine when trying to restore.
Disconnect all drives now to prevent any mistakes from occuring.
#2 Reinstall OS X 10.6 from disk
Get out your 10.6 install disk and make sure it's clean and polished (very soft cloth and a bit of rubbing alcohol, no scratches) If your disk is borked, you'll have to order a new one from Apple with your serial number.
Hold c boot off the 10.6 disk (wired keyboard, internal optical drive), use Disk Utility First Aid to >Repair Disk of your internal drive (do not format or erase!!), Quit DU and simply re-install 10.6.
Note: Simply reinstalling 10.6 version from disk (without erasing the drive) only replaces 10.6.8 with 10.6.x and bundled Apple programs, won't touch your files (backup anyway) or most programs, unless they installed a kext file into OS X itself. (only a few on average do this)
#3 Update to 10.6.8 without Security Update 2012-001 v1.0 or v1.1
Reboot and log in, update to 10.6.8 via Software Update, but EXCLUDE THE Security Update 2012-001 by checkinig the details and unchecking the blue check box.
#4 Reinstall any non-working third party programs
When you reboot, make sure to reinstall any programs that require kext files installed into OS X, you'll know, they won't work when you launch them or hang for some reason as they are missing the part they installed into OS X.
If for some freakish reason you get gray screen at any time when booting (possible it might occur when you reinstall older programs), hold the shift key down while booting (Safe Mode, disables kext files) and update your installed third party software so it's compatible with 10.6.8.
https://support.apple.com/kb/TS2570
That's it really.

The server was unable to save the form at this time. Please try again - tried the trust standards...

2013 standard sharepoint server. Content DBs were on a Trial enterprise server and copied over to standard server. All was good on trial server.
there are 8 sites on server, 2 of the sites cannot create or edit items, they get "The server was unable to save the form at this time. Please try again"
googling around i tried everything. restarted search host controller, checked ram usage (8gb free), manage content types, iisresets, edit the web.config file ( add things for ram, search host, etc), no alternate access mappings, .net HTTP activation, rebooted
server... I'm sure i missed some.
The server is new install, all but the August HF CUs. Trial server the content DBs came from is at same level.
It is not a server level issue as the other 6 sites are fine. its something with just 2 sites.
kinda stuck here...
Thanks,
Scott<-

With the USL Logs were hard to track down what was happening, though I think it was too do with /_vti_bin/client.svc/ProcessQuery.
I did the Enable/Disable Anonymous Access on the Directory with no luck.
Brought up Fiddler and Saw that I was getting 401 and 500 Errors on
GET http://team.intranet.eandm.com/it/_vti_bin/client.svc/ProcessQuery HTTP/1.1
So it had something to do with Permissions. I checked the Authentication and the sites that worked had Forms Auth Enabled, and the ones that didn't, didn't have forms Auth enabled. Enabling it manually was no go.
I then went though the web.config on the working and non-working sites and there were some differences. The Authentication was Forms on the working site, Windows on the nonworking. There was many things not present. httpModules section was missing,
Many of the Microsoft Identity /Authentication lines etc.
So I Basically took the web.config from the working site and copied it to the non-working site preserving the following line from the original web.config:
<machineKey validationKey="{key}" decryptionKey="{key}" validation="{hash}" />
After that I had Security Issues, Though I think this was Caused by the July 2014 CU making everything use the Microsoft Identity parts, where as the server I was porting form had the sites created before the July 2014 CU. (though both were at the same level)
Even though all of the users were present in the site security, I had to Drop and re-add them to every site/and list with special Perms.
With the Security Fixed, I no longer received the Error "The server was unable to save the form at this time. Please try again"
Knock on wood its all functioning fine.

The server was unable to save the form at this time. Please try again

Having created a new custom list (even with only a text field) I am unable add new items to the list - the error message is Unexpected
response from server. The status code of response is '0'. The status text of response is ''. when in 'quick edit'.
If I try to add or modify an item in the list by clicking 'add new item' I get "The
server was unable to save the form at this time. Please try again."
I have restarted the Sharepoint Search Host Controller server but to no avail. I have 24Gb RAM for this server so it's not a
memory issue (8Gb available). I have also tried from various browsers including Chrome and Safari - still the same error message.
This error only occurs on lists. I can edit document properties in a library and have no problems with calendar entries.
There are no entries in the event viewer, so where do I need to begin looking to find out what is (or rather is not) happening?

One thing I noticed in SP 2013 is that if your list has unique permissions and a user/group has permissions only on that list and has limited or no access at the site level, then you run into this error: "The server was unable to save the form at this time.
Please try again."
This can be resolved by either giving that user/group atleast read access at the site level or in my case I had to create a new permission set (since we cant update limited access permission set) which is same as limited access but with the additional permission
of "Use Remote Interfaces - Use SOAP, Web DAV, the Client Object Model or SharePoint Designer interfaces to access the Web site."
I am not sure if this is a bug or as per design, but not allowing a user who has needed permissions at the list level but limited access at site level doesnt seem right. Never ran into this issue in prior version of SharePoint. I tested and this additional
permission doesnt seem to violate any security at site level. But implement this at your risk. No guarantees provided and not responsible for any issues with this implementation if any.

Unable to Save more than 1 Business-object-provider for the Connector.

I m using MEP 1.0 Platform.
My Ecbo Connector "BankDb" had initially "Account" Object Provider which i was able to save successfully via the MEP console.Later on i added the "Statement" Object Provider to the same connector. But i get this Exception
java.lang.IllegalArgumentException: Object:
{[[email protected]f,
[email protected]55,
[email protected]f,
[email protected]c,
[email protected]2,
[email protected]d,
[email protected]9]} is not a known entity type.
I shut down my Server & then restarted it.i removed the AccountObject Provider & Added StatementObject Provider instead & clicked save & it saved my Connector Successfully But when i tried to add the AccountProvider too i get the same exception.In short i am unable to save both providers at the same time in the console.
I googled later on & found something Similar on java.net
https://glassfish.dev.java.net/issues/show_bug.cgi?id=3235
I am not sure about all of this as i am just a beginner.
Please Help
Thx in Advance
Alex.

Hello, thanks for your interest in the GlassFish Mobility Platform. The ECBO architecture supports exactly one business-object-provider per connector. You could combine your account and statement data into a single composite business object. You could also upgrade to MEP 1.1 and use the dynamic data feature (JerseyME) on the client to retrieve dynamic data such as the statement report and use the business-object-provider for the synchronized data, ie. the account activity. For more information see the [Sun GlassFish Mobility Platform 1.1 Developer's Guide for Enterprise Connectors|http://docs.sun.com/app/docs/doc/820-7207] .
regards,
Hans

Unable to save Time Buckets Profile for SNI

Similar Messages

Maybe you are looking for