Unable to Scan Barcode using SAPLPD printout but working using PDF

Hi,
I'm trying to print from print preview going to Text and clicking Print which allows me to print output using SAPLPD and also generates spool.
For print output through SAPLPD i cannot scan the barcode.
But where as when i run the program RSTXPDFT4 and give the spool number and download the output in PDF format. Now when i take a print out of PDF format i can scan the barcode.
Note: The only difference in these is for PDF the barcode is printing as say "balck white black white black" but the print through SAPLPD the barcode is printing as say "white black white black white" i mean to say i place of black line its prints white life.
Please let me know did any one have faced the same problem.
Regards,
Sudheer.

Hi @MTilney,
Welcome to the HP Forums!
I noticed that you are unable to scan using the feeder on your HP Envy 5300 printer. I am happy to look into this scanning issue for you!
The reason to change from the flatbed to the feeder is greyed out, is due to the mechanical function of the printer. This printer does not have a feeder to scan multiple pages at once, only a flatbed scanner.
According to this guide, Scanning with the Full Feature HP Software in OS X v10.10 Yosemite, select Scanning a multi-page original into a single file, follow the instructions for scanner glass. If your printer does not have an ADF and you are scanning a multi-page document, you will need to load each page on the scanner glass one at a time to scan the document.
To scan with without HP software, please see this guide, Scanning in OS X v10.10 Yosemite Without HP Software.
Hope this clears things up for you, and have a nice day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Similar Messages

How to scan barcode using flex?

We are developing a mobile app.
Our requrement is to scan barcode using mobile camera.
Any one can give me idea how to do it?
Do I need to connect to any third party app? If so How.
Or flex have capabilites to read barcode?
I have seen this example using web cam
http://www.renaun.com/flex2/BarcodeReader/BarcodeReader.html
I am not sure that will it work in mobile app?

This is a Flex question. Please try posting on the Flex forums for better response http://forums.adobe.com/community/flex/flex_general_discussion

Unable to Preview barcode font fields in Word Template Builder PDF Preview

I have searched for solutions to this problem but did not find anything that I have not tried. I have IDAutomation Barcode fonts installed and am using the Word template builder v10.1.3.4 Build 129. My Templates work fine in EBS, but I cannot Preview in a PDF, any fields that are formatted with my barcode or MICR fonts. I have created an xdo.cfg file as per the documentation and placed it in C:\Program Files\Oracle\BI Publisher\BI Publisher Desktop\Template Builder for Word\config. I can successfully preview in an RTF, but not a PDF. Any suggestions?
Here is my xdo.cfg file:
<config version="1.0.0" xmlns="http://xmlns.oracle.com/oxp/config/">
 
 <properties>
 
 
 <property name="system-temp-dir">E:\Temp</property>
 
 <property name="pdf-compression">true</property>
 
 <property name="pdf-security">false</property>
 <property name="pdf-open-password">user</property>
 <property name="pdf-permissions-password">owner</property>
 <property name="pdf-no-printing">true</property>
 <property name="pdf-no-changing-the-document">true</property>
 </properties>

 <fonts>
 
 
 <truetype path="C:\WINDOWS\Fonts\WINGDING.ttf" />
 
 
 
 <truetype path="C:\WINDOWS\Fonts\GnuMICR.ttf" />
 
 
 
 <truetype path="C:\WINDOWS\Fonts\IDAutomationC39L.ttf" />
 
 
 
 <truetype path="C:\WINDOWS\Fonts\IDAutomationC39M.ttf" />
 
 
 
 <truetype path="C:\WINDOWS\Fonts\IDAutomationC39S.ttf" />
 
 
 
 <truetype path="C:\WINDOWS\Fonts\IDAutomationC39XL.ttf" />
 
 
 
 <truetype path="C:\WINDOWS\Fonts\IDAutomationC39XS.ttf" />
 
 
 
 <truetype path="C:\WINDOWS\Fonts\IDAutomationC39XXL.ttf" />
 
 
 
 <truetype path="C:\WINDOWS\Fonts\IDAutomationHC39L.ttf" />
 
 
 
 <truetype path="C:\WINDOWS\Fonts\IDAutomationHC39M.ttf" />
 
 
 
 <truetype path="C:\WINDOWS\Fonts\IDAutomationHC39S.ttf" />
 
 
 
 <truetype path="C:\WINDOWS\Fonts\IDAutomationHC39XL.ttf" />
 
 
 
 <truetype path="C:\WINDOWS\Fonts\IDAutomationHC39XS.ttf" />
 
 
 
 <truetype path="C:\WINDOWS\Fonts\IDAutomationHC39XXL.ttf" />
 
 </fonts>
</config>
Thank for any assistance.
Regards,
Donn

The fonts settings did not show up properly. Here is an example inside comments:
 



The font family, name, and path have been checked thoroughly.
Thanks,
Donn

Scan barcodes using C# in Windows store 8 app

I am working on a Windows Store 8 App (targets windows 8 and not windows 8.1) and need to integrate barcode reading functionality on the app. I am using C#/XAML in this app.
I am looked on internet and came across this link that shows some code for this functionality. But it seems to target only windows 8.1. I have also checked this library from codeplex and find that this refers to only a subset of barcode types.
I want to know is there any API with the help of which I can read barcodes in Windows 8 Store app.
I will be capturing images from the tab's camera and reading the images to decode the barcodes and use it further in the app.

The LeadTools SDK contains Win8 libraries for different 1-D and 2-D barcode types and it includes assemblies for both 8.0 and 8.1

Unable to create MV in Oracle 9i, but works in 10g

For what ever reason, we are developing in Oracle 10g, but production implementation will be in Oracle 9i. I was able to successfully create this MV using the FAST REFRESH ON COMMIT option in 10g, but received a ORA-12054: cannot set the ON COMMIT refresh attribute for the materialized view, when attempting to create it in 9i. I've followed Oracle's documentation on the restrictions for creating Fast Refresh MV's in 9i, and it appears all conditions have been met. The DBA has yet to grant me execute on the DBMS_MVIEW.EXPLAIN_MVIEW package and SELECT privilege on MV_CAPABILITIES_TABLE, so I don't know what could be wrong. Any ideas?
create materialized view log on tb_slea_eligible_emp
with sequence, rowid INCLUDING new values;
create materialized view log on tb_slea_election
with sequence, rowid INCLUDING new values;
create materialized view log on tb_slea_recclub_award
with sequence, rowid INCLUDING new values;
create materialized view log on tb_slea_initiation
with sequence, rowid INCLUDING new values;
DROP MATERIALIZED VIEW MV_SLEA_CONTRIBUTION;
CREATE MATERIALIZED VIEW MV_SLEA_CONTRIBUTION
BUILD IMMEDIATE
REFRESH FAST ON COMMIT
WITH PRIMARY KEY
AS
SELECT emp.slea_year,
       emp.empid,
       NVL (t1.original_bal, 0) recclub_amt,
       NVL (t2.initiation_amt, 0) initiation_amt,
       (NVL (t1.original_bal, 0) + NVL (t2.initiation_amt, 0)) firm_funded_amt,
       NVL (elect.slea_min_amt, 0) slea_min_amt,
       elect.slea_add_amt,
       NVL (elect.slea_fullyr_amt, 0) slea_fullyr_amt,
       (NVL (t1.original_bal, 0) + NVL (t2.initiation_amt, 0) + NVL (elect.slea_fullyr_amt, 0)) total_acct,
       emp.ROWID elig_emp_rowid,
       elect.ROWID election_rowid,
       t1.ROWID recclub_rowid,
       t2.ROWID initiation_rowid
FROM tb_slea_eligible_emp emp,
       tb_slea_election elect,
       (SELECT ROWID, empid, original_bal
          FROM tb_slea_recclub_award
         WHERE slea_year = 2007
           AND record_type = 'C') t1,
        (SELECT ROWID, empid, initiation_amt
          FROM tb_slea_initiation
         WHERE slea_year = 2007 ) t2
WHERE emp.empid = elect.empid
   AND emp.slea_year = 2007
   AND emp.empid = t1.empid(+)
   AND emp.empid = t2.empid(+)
   AND emp.slea_year = elect.slea_year
   AND emp.eligible_ind = 'Y'
   AND elect.record_type = 'C';
CREATE INDEX MV_SLEA_CONTRIB_IDX1 ON MV_SLEA_CONTRIBUTION
(elig_emp_rowid);
CREATE INDEX MV_SLEA_CONTRIB_IDX2 ON MV_SLEA_CONTRIBUTION
(election_rowid);
CREATE INDEX MV_SLEA_CONTRIB_IDX3 ON MV_SLEA_CONTRIBUTION
(recclub_rowid);
CREATE INDEX MV_SLEA_CONTRIB_IDX4 ON MV_SLEA_CONTRIBUTION
(initiation_rowid);

Yes, it boggles me as to why production is a STEP DOWN from development environment. Probably because there are like 20 other applications still on the production database that are not ready to upgrade to 10g...nevermind being ready for 11g!
I went through the compatibility checklist, but I still don't understand what can be wrong. I was hoping that maybe someone else has gone through MV incompatibility between 10g and 9i that could share their experience.

VPN - Unable to load Citrix page via Airport (but works w/other router)

I had successfully used my PowerBook to connect to my company's system via VPN and Citrix for 3 years using an Airport Extreme connected to a DSL modem. In the last 6-8 weeks or so I have been able to establish a VPN connection, but my browser is never able to load the Citrix Metaframe page, so I can never connect and do work.
Internet Explorer had worked previously, but now gives an immediate "access failed" message. Firefox hangs indefinitely as it tries to load data. Maybe this is due to a security or other software update. I have not made any hardware changes (other than unplugging and restarting everything). NOTE: I AM able to login using other wireless routers, so I suspect the Airport Extreme is at least part of the problem. Any idea how I might fix this? Thanks!
PowerBook G4 Mac OS X (10.4.8) 17" 1.33 GHz + Airport Extreme

I had successfully used my PowerBook to connect to my company's system via VPN and Citrix for 3 years using an Airport Extreme connected to a DSL modem. In the last 6-8 weeks or so I have been able to establish a VPN connection, but my browser is never able to load the Citrix Metaframe page, so I can never connect and do work.
Internet Explorer had worked previously, but now gives an immediate "access failed" message. Firefox hangs indefinitely as it tries to load data. Maybe this is due to a security or other software update. I have not made any hardware changes (other than unplugging and restarting everything). NOTE: I AM able to login using other wireless routers, so I suspect the Airport Extreme is at least part of the problem. Any idea how I might fix this? Thanks!
PowerBook G4 Mac OS X (10.4.8) 17" 1.33 GHz + Airport Extreme

Restoring .dmg image from external to Mac HD in Disk Utility: "Unable to scan image (Input/output error)"

Hi guys,
So I've got a problem with restoring the image backup I did (using Disk Utility) of my 500GB HD on my MBP which was acting weird or maybe even crashed a few months ago. After creating the backup image and putting it on my external device, I installed Mavericks back to see if everything was alright (mainly the HD) and everything seems okay.
I did try restoring the backup image through disk utility before installing mavericks (thus erasing everything again on the HD) AND after. But nothing..
The whole process starts fine and then it starts scanning the image when after maybe a good 10-15min in I get a message that says that it was unable to scan the image. I tried verifying the disk(s), everything came out "OK". Also tried scanning it through Images > Scan image for Restore... with the same results.
While searching I've seen people getting messages like "Unable to scan filename.dmg (Invalid argument)" and "Unable to scan filename.dmg
(Internal error)" but none have (Input/output error)
The screen grab is below.
I also came across something about using terminal/commands but I'm not that savvy with it, especially considering that those there had issues with either mounting or trouble finding the image.
I've also tried moving the backup image to a different external device 2TB and also the desktop because I read it may have to do with the format of the externals or maybe free space. But THEN I would get a message saying
"The Finder can't complete the operation because some data in "Mac HD Backup.dmg" can't be read or written. Error code -36"
Fyi ALL my externals are HFS+/Journaled and the backup image format was compressed.
I REALLY don't know what to do next. Was it the wrong move to create a dmg image? Have I lost everything? Is there still a way out?
If anyone can help, THANKS!
2012 MacBook Pro, Mac OS X (10.9.3)

Make a "Genius" appointment at an Apple Store, or go to another authorized service provider. You may have to leave the machine there for several days.
Back up all data on the internal drive(s) before you hand over your computer to anyone. There are ways to back up a computer that isn't fully functional—ask if you need guidance.
If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
Apple also recommends that you deauthorize a device in the iTunes Store before having it serviced.
*An SSD doesn't need to be zeroed.

ALD Not able to scan Barcode lable

Hi
I am unable to scan barcode lable which i have printed. Can any one help me in this. Urgent requirment.

There are multiple barcode formats that can be chosen in the layout, which can affect whether your barcode scanner will be able to read the barcode or not.
Also, B1 sometimes automatically change barcode format if the number the barcode represents does not work with the format.
Check barcode format.

Unable to scan using feeder on Envy 5300

I am trying to scan multiple pages using the feeder but when using the HP Scan Utility the option to changer from 'Flatbed' source is greyed out and can't be changed.
Any advice on how to change this or use an alterative scan method to scan a multi-page document to PDF using the feeder?
Thanks

Hi @MTilney,
Welcome to the HP Forums!
I noticed that you are unable to scan using the feeder on your HP Envy 5300 printer. I am happy to look into this scanning issue for you!
The reason to change from the flatbed to the feeder is greyed out, is due to the mechanical function of the printer. This printer does not have a feeder to scan multiple pages at once, only a flatbed scanner.
According to this guide, Scanning with the Full Feature HP Software in OS X v10.10 Yosemite, select Scanning a multi-page original into a single file, follow the instructions for scanner glass. If your printer does not have an ADF and you are scanning a multi-page document, you will need to load each page on the scanner glass one at a time to scan the document.
To scan with without HP software, please see this guide, Scanning in OS X v10.10 Yosemite Without HP Software.
Hope this clears things up for you, and have a nice day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

I have a MacBook Air (10.8.2) connected to Canon MP530 printer. I'm unable to scan documents as MP Navigator is not supported. Any ideas on how to scan using this printer.

I have a MacBook Air (10.8.2) connected to a Canon MP530 printer. I am unable to scan documents as it appears my Mac does not support MP Navigator. Any ideas? I have made an inquiry to Canon but have not received any answers yet.

Why do you say your MBA won't support it? MP Navigator for OS X 8 and the MP530 is available here.

4S ios updated to 7 is giving me problems for using wifi Thus it is difficult for me to use internet. The wifi comes on for a while and goes off in a few minutes The phone is unable to scan networks available for use

4S ios updated to 7 is giving me problems for using wifi Thus it is difficult for me to use internet. The wifi comes ON for a while and goes off in a few minutes The phone is unable to scan networks available for use
Am having ipad2, ipad mini and iphone 4 with family of two persons. One hp laptop and a DELL professional computer also in operation
Myself an engineer for projects
Looks the company apple cannot grow if they do not support solving the problems of their existing customers
Ashok Dhingra
India

You are not addressing Apple here. If you have a problem, describe it and someone might be able to help. Just to be sure, the wi-fi on the phone will go off after the phone goes into sleep mode unless it is actively being used. This is a battery saving measure. If you are actively using the internet, and the phone is still awake, then the wi-fi should remain connected.
What troubleshooting steps have you tried.

I have used Image Capture to scan images/documents and then saved them as either PDFs or PNG files. For some reason, just this past week Image Capture will no longer save the file. It scans, and the Scan Results window pops up, but it won't save file.

I have used Image Capture to scan images/documents and then saved them as either PDFs or PNG files. For some reason, just this past week, Image Capture will no longer save the file. It scans, and the Scan Results window pops up, but it won't save file.
The file name has no special character in it, just letters and no spaces.
I have done this in the past and it has worked, but now it will not.
I have not upgraded any software, that I am aware of.
After scanning, the Image Capture pops up the Scan Results with the file name in the window, but neither the Scan Results nor the Image Capture window responds to inputs. The Image Capture window is frozen, with only the "Overview" and "Cancel" buttons active (but non-responsive).
Is this a software issue or a scanner hardware issue? I am using a HP Photosmart C6200 series printer/scanner on a network using a Time Capsule airport.
Thanks.

I had the same problem.
Got a 90% fix. Apparently the Mavericks preferences won't work with Yosemite, so I just deleted the Image Capture preferences.
Unfortunately, the "Scan to" folder seems to be permanently set to the Pictures folder.
1. Quit Image Capture
2. Go to Finder > Go > Home, which opens up your home folder (named after your user name)
3. Open Library > Preferences > com.apple.ImageCapture.plist - Drag this file to the Trash
4. Start "Image Capture", click "Details" and change all your settings as you prefer
5. Quit and restart "Image Capture". Notice it remembers all your settings except "Scan to" folder. It insists on saving to "Pictures".
That's as far as I was successful. I tried changing the "Scan to" folder to "Desktop", but on launch, Image Capture always sets it back to "Pictures".
This is what I tried:
6. Download and install "Pref Setter" from http://www.nightproductions.net/prefsetter.html
7. Quit "Image Capture". Right-click on "com.apple.ImageCapture.plist" and open with Pref Setter.
8. Search for "Pictures", which finds "~/Pictures" (the tilde character at the start means your home directory).
9. Double-click on "~/Pictures" and change it to the folder you prefer. I like "~/Desktop"
10. Choose File > Save then Quit from Pref Setter. Note that re-opening the plist file still shows "~/Desktop"
11. Start up "Image Capture" -- on startup, "Image Capture" sets "Scan to" folder to "Pictures"
I consider this a bug.

I have scanned photos using an Epson V500 scanner set to jpeg format using the least compression (highest quality) setting. When I try to import the scanned jpegs into iPhoto I get an error message saying "The file is an unrecognized format." But if I

I have scanned photos using an Epson V500 scanner set to scan using jpeg format at the highest quality (least compression) setting. When I try to import the scanned jpegs into iPhoto, I get an error message from iPhoto saying "The file is an unrecognized format." But if I reduce the quality setting on the Epson scanner to just slightly below highest quality, the images import into iPhoto just fine. Why won't iPhoto accept jpegs scanned at the highest quality setting? Wondering?

What scanner format settings dis you use? Are these color photos? If they are B/W did you scan as grayscale images? That could be the problem.
Are you able to open them with Preview? If so do a Save As, select full quality and save as a jpeg with a new file name. See if that file will import and work as intended.
OT

I have business catalyst website imported in Dreamweaver. But I am unable to find or use database for it. Please help me into this

I have business catalyst website imported in Dreamweaver. But I am unable to find or use database for it. Please help me into this

You might find better help here: Dreamweaver & Business Catalyst
Additional Info: Dreamweaver Help | Dreamweaver-Business Catalyst integration

Unable to scan Code39 barcodes in 9i

Using Oracles Javabean, I created a report in 9i generating code39 barcodes.
When scanning barcodes, it appears that the bean included a check character at the end of the generated barcode. Example: 1234 will scan as 1234A. Is there a way to turn off this check character?

hello,
the java bean shipped with the barcode bean example is for demonstration purposes only and is not intended to be used in a production environment.
if you want to use the java bean approach, i would suggest you purchase one of the commercially available java beans (e.g. from idautomation)
thanks,
ph.

Unable to Scan Barcode using SAPLPD printout but working using PDF

Similar Messages

Maybe you are looking for