Unable to scan (internal error)
Hi Apple Have a question,
I am trying to create a bootable partition on my external firewire Hard Drive for Leopard OS.
First I created .dmg file : "Mas OS X DVD.dmg"
2nd > after creating the dmg file - I ran "Scan image restore" on the DMG file
3rd > after running completing both steps above the system generates this error message:
"Unable to scan "Mac OS X install Dvd.dmg" (internal error).
According to my research, before installing Leopard on to an external hard drive as a bootable partition, the dmg file must be scanned before completing the process.
However, the scan is not working. Can someone shed some light on how I can
get this off the ground.
Again:
The object is to create a bootable partition of leopard on to my external hard drive for
Technical maintenance support of my computers.
Please send me your solution or thoughts
Message was edited by: oross
Sorry, no Apple here, only other users. That said, I have no idea of what you're trying to do. If you want to make a bootable partition, all you have to do is install the software onto the partition. Alternatively, you can put a bootable backup/clone of your current boot volume onto it using Carbon Copy Cloner or SuperDuper!. BTW, the error indicates that the .dmg file you created is corrupt.
Similar Messages
-
External 500GB drive is partitioned with 400GB for Mac OS extended (journalling) and 2nd partition formatted today as "ExFAT".
Yesterday I tried to create a disk image of my HD to no avail - this was compressed on a FAT partition. I got a warning after running the <scan image for restore> saying "unable to scan (internal error)"
I rang Apple support who suggested formatting a partition as MAC OS extended (journalling) and choose to save the image as "read/write'. The image process stopped writing at about 200GB and then the file size jumped to 499GB (ie the size of the HD). But the process did nothing for about an hour so I foce quit disk utility (as suggested by apple support)
My current attempt was to format the external drive again; this time with a 400GB Mac OS extended (journal) format; plus a 100GB ExFAT format partition. The new image was created after about 2.5hrs with a compressed size of 149GB. However, after running the "scan image for restore" facility I got the warning message "unable to scan filename " (internal error). The process was scanning the image file according to the progress bar - this took about hour - thus the warning is a puzzle.
If anyone can say more about this error I would really appreciate knowing tips for using disk utility. The screen grab is below.
"unable to scan filename " (internal error)
thanksThanks for a quick reply <baltwo>. You’ve answered that it is not a fake message!
fyi: I thought that I would use my external Buffalo for two purposes; namely the smaller ExFAT partition for copying stuff to my win7 netbook. The larger partition was to be used as my imac image of SL. So this was my first attempt at using disk utility - the idea being to hold an image backup at another location. Plus I now have the Lion thumbdrive ready to upgrade from SL and so being cautious wanted to have a SL image backup
Anyway I followed the apple instructions using my mac 10.6.3 install DVD but it would appear from other discussions that <unable to scan (internal error)> is not unique to me.
I’ll get back to apple telephone support for further advice.
I would though be grateful for an “idiots’ guide to making an image backup of my internal HD that runs SL 10.6.8
eg should I have just one partition on the external USB drive? format it as Mac OS extended? create the image as compressed or read/write? Basically I’ll do whatever will work!!
thanks again -
Disk Utility is unable to scan (internal error)
Hi all.
Did some searching around the forums for an answer, but couldn't find anything useful.
With the help of my partner, we created an image of my hard drive running Snow Leopard onto an external drive. We replaced my hard drive with a solid state drive, and then I couldn't boot it up from a Snow Leopard OS X Install DVD. So, we installed Lion OSX (or something to let us boot from, I don't know what to call it) on a flash drive that we used to boot up the computer. Hooray! Works!
Ok, so now we're in Lion's Disk Utility trying to restore our image that's on the external drive. We need to scan the image, okay, but after an hour and a half we get an error:
"unable to scan image. (internal error)"
Tried scanning about three times, but no luck. We're stuck. Right now we're verifying the image, but it looks like it'll take another few hours.
Any help or insight appreciated.Update: Verified image without error. Hooray! (Guess that took a lot less time than a few hours, more like 20 minutes?)
After scanning the image for a better part of an hour, with the message "Block Checksum Partition #1" underneath, the blue bar completely fills, it turns to blue & white diagonal stripes, and I still get the same error message:
"unable to scan image. (internal error)"
Booooooo. -
Hi guys,
So I've got a problem with restoring the image backup I did (using Disk Utility) of my 500GB HD on my MBP which was acting weird or maybe even crashed a few months ago. After creating the backup image and putting it on my external device, I installed Mavericks back to see if everything was alright (mainly the HD) and everything seems okay.
I did try restoring the backup image through disk utility before installing mavericks (thus erasing everything again on the HD) AND after. But nothing..
The whole process starts fine and then it starts scanning the image when after maybe a good 10-15min in I get a message that says that it was unable to scan the image. I tried verifying the disk(s), everything came out "OK". Also tried scanning it through Images > Scan image for Restore... with the same results.
While searching I've seen people getting messages like "Unable to scan filename.dmg (Invalid argument)" and "Unable to scan filename.dmg
(Internal error)" but none have (Input/output error)
The screen grab is below.
I also came across something about using terminal/commands but I'm not that savvy with it, especially considering that those there had issues with either mounting or trouble finding the image.
I've also tried moving the backup image to a different external device 2TB and also the desktop because I read it may have to do with the format of the externals or maybe free space. But THEN I would get a message saying
"The Finder can't complete the operation because some data in "Mac HD Backup.dmg" can't be read or written. Error code -36"
Fyi ALL my externals are HFS+/Journaled and the backup image format was compressed.
I REALLY don't know what to do next. Was it the wrong move to create a dmg image? Have I lost everything? Is there still a way out?
If anyone can help, THANKS!
2012 MacBook Pro, Mac OS X (10.9.3)Make a "Genius" appointment at an Apple Store, or go to another authorized service provider. You may have to leave the machine there for several days.
Back up all data on the internal drive(s) before you hand over your computer to anyone. There are ways to back up a computer that isn't fully functional—ask if you need guidance.
If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
Apple also recommends that you deauthorize a device in the iTunes Store before having it serviced.
*An SSD doesn't need to be zeroed. -
hi everybody ;
i have 9.2.0.7 db runs on SLES9 on host A. and i take full rman database backup to make a new database on different host ( host B ) with different file structure. ( sid is the same ) i had already 1 database on host B. after this duplicate now there are 2 database on host B.
i take daily full database rman backup on the new host for my new database and there is no problem. when i try to take extra full export backup i get an error ;
Dynamic link error: libxdb.so: cannot open shared object file: No such file or directory
*** 2010-08-05 09:46:12.868
ksedmp: internal or fatal error
ORA-00600: internal error code, arguments: [unable to load XDB library], [], [], [], [], [], [], []
as i search ; i have to stop the database and listener and set the LD_LIBRARY_PATH variable. how can i make this without make any mistake for the first database runs on Host B.
because 2 database must be up and running on host B. can you explaın these operation step by step ?
thank you ....craft wrote:
any idea ?
>any idea ?
your database is out off support you should consider to upgrade. ORA-00600 indicate for bug -
The server was unable to process the request due to an internal error.
Properties set in my project are below
namespace EmployeeService
public class Employee
private int _Id;
private string _Name;
private string _Gender;
private DateTime _DateofBirth;
public int Id
get { return _Id; }
set { _Id = value; }
public string Name
set { _Name = value; }
get { return _Name; }
public string Gender
set { _Gender = value; }
get { return _Gender; }
public DateTime DateofBirth
set { _DateofBirth = value; }
get { return _DateofBirth; }
This is the service i have developed in my project
namespace EmployeeService
// NOTE: You can use the "Rename" command on the "Refactor" menu to change the class name "Service1" in both code and config file together.
public class EmployeeService : IEmployeeService
public Employee GetEmployee(int Id)
Employee objemp = new Employee();
string cs = ConfigurationManager.ConnectionStrings["DBCS"].ConnectionString;
using (SqlConnection con = new SqlConnection(cs))
SqlCommand cmd = new SqlCommand("spGettblEmployeewcf", con);
cmd.CommandType = CommandType.StoredProcedure;
SqlParameter Idparameter = new SqlParameter();
Idparameter.ParameterName = "@Id";
Idparameter.Value = Id;
cmd.Parameters.Add(Idparameter);
con.Open();
SqlDataReader dr = cmd.ExecuteReader();
while (dr.Read())
objemp.Id = Convert.ToInt32(dr["Id"]);
objemp.Name = dr["Name"].ToString();
objemp.Gender = dr["Gender"].ToString();
objemp.DateofBirth = Convert.ToDateTime(dr["DateofBirth"]);
return objemp;
public void SaveEmployee(Employee objemp)
string cs = ConfigurationManager.ConnectionStrings["DBCS"].ConnectionString;
using (SqlConnection con = new SqlConnection(cs))
SqlCommand cmd = new SqlCommand("spInsertEmployeewcf", con);
cmd.CommandType = CommandType.StoredProcedure;
SqlParameter ParameterId = new SqlParameter()
Value = objemp.Id,
ParameterName = "@Id"
cmd.Parameters.Add(ParameterId);
SqlParameter ParameterName = new SqlParameter()
Value = objemp.Name,
ParameterName = "@Name"
cmd.Parameters.Add(ParameterName);
SqlParameter ParameterGender = new SqlParameter()
Value = objemp.Gender,
ParameterName = "@Gender"
cmd.Parameters.Add(ParameterGender);
SqlParameter ParameterDateofBirth = new SqlParameter()
Value = objemp.DateofBirth,
ParameterName = "@DateofBirth"
cmd.Parameters.Add(ParameterDateofBirth);
con.Open();
cmd.ExecuteNonQuery();
The Service Contract code is
namespace EmployeeService
// NOTE: You can use the "Rename" command on the "Refactor" menu to change the interface name "IService1" in both code and config file together.
[ServiceContract]
public interface IEmployeeService
[OperationContract]
Employee GetEmployee(int Id);
[OperationContract]
void SaveEmployee(Employee objemp);
// TODO: Add your service operations here
// Use a data contract as illustrated in the sample below to add composite types to service operations
and i deployed the EmployeeService in iis and consuming the service in my web application the code is below
protected void btnsave_Click(object sender, EventArgs e)
EmployeeService.EmployeeServiceClient client = new EmployeeService.EmployeeServiceClient("basicHttpBinding");
EmployeeService.Employee employee = new EmployeeService.Employee();
employee.Id = Convert.ToInt32(txtid.Text);
employee.Name = txtname.Text;
employee.Gender = txtgender.Text;
employee.DateofBirth = Convert.ToDateTime(txtdob.Text);
client.SaveEmployee(employee);
protected void btnget_Click(object sender, EventArgs e)
EmployeeService.EmployeeServiceClient client = new EmployeeService.EmployeeServiceClient("basicHttpBinding");
EmployeeService.Employee employee = client.GetEmployee(Convert.ToInt32(txtid.Text));
txtname.Text = employee.Name;
txtgender.Text = employee.Gender;
txtdob.Text = employee.DateofBirth.ToShortDateString();
and when i am entering the details of employee Id,Name,Gender,DateofBirth and clicking save button iam getting the following error
The server was unable to process the request due to an internal error. For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute or from the <serviceDebug> configuration behavior)
on the server in order to send the exception information back to the client, or turn on tracing as per the Microsoft .NET Framework SDK documentation and inspect the server trace logs.
Code in web.config file in Webapplication(Client) is the following
<?xml version="1.0"?>
<!--
For more information on how to configure your ASP.NET application, please visit
http://go.microsoft.com/fwlink/?LinkId=169433
-->
<configuration>
<system.diagnostics>
<sources>
<source name="System.ServiceModel.MessageLogging" switchValue="Warning, ActivityTracing">
<listeners>
<add type="System.Diagnostics.DefaultTraceListener" name="Default">
<filter type="" />
</add>
<add name="ServiceModelMessageLoggingListener">
<filter type="" />
</add>
</listeners>
</source>
<source name="System.ServiceModel" switchValue="Warning, ActivityTracing"
propagateActivity="true">
<listeners>
<add type="System.Diagnostics.DefaultTraceListener" name="Default">
<filter type="" />
</add>
<add name="ServiceModelTraceListener">
<filter type="" />
</add>
</listeners>
</source>
</sources>
<sharedListeners>
<add initializeData="C:\Users\HEMANTH\Desktop\Client\Client\Web_messages.svclog"
type="System.Diagnostics.XmlWriterTraceListener, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"
name="ServiceModelMessageLoggingListener" traceOutputOptions="Timestamp">
<filter type="" />
</add>
<add initializeData="C:\Users\HEMANTH\Desktop\Client\Client\Web_tracelog.svclog"
type="System.Diagnostics.XmlWriterTraceListener, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"
name="ServiceModelTraceListener" traceOutputOptions="Timestamp">
<filter type="" />
</add>
</sharedListeners>
<trace autoflush="true" />
</system.diagnostics>
<system.web>
<compilation debug="true" targetFramework="4.0" />
</system.web>
<system.serviceModel>
<diagnostics>
<messageLogging logEntireMessage="true" logMalformedMessages="true"
logMessagesAtTransportLevel="true" />
</diagnostics>
<bindings>
<basicHttpBinding>
<binding name="basicHttpBinding" />
</basicHttpBinding>
<wsHttpBinding>
<binding name="mexHttpBinding">
<security mode="None" />
</binding>
</wsHttpBinding>
</bindings>
<client>
<endpoint address="http://localhost/EmployeeWebServices/EmployeeService.svc/basic"
binding="basicHttpBinding" bindingConfiguration="basicHttpBinding"
contract="EmployeeService.IEmployeeService" name="basicHttpBinding" />
<endpoint address="http://localhost/EmployeeWebServices/EmployeeService.svc/mex"
binding="wsHttpBinding" bindingConfiguration="mexHttpBinding"
contract="EmployeeService.IEmployeeService" name="mexHttpBinding" />
</client>
</system.serviceModel>
</configuration>
Things i have tried till now are
1)changed the name of the name of the endpoint address basicHttpBinding to basicHttpBinding_IEmployeeService but still get the save error.
2)Opened the Message Log Trace. Got the error as follows
<MessageLogTraceRecord>
<HttpResponse xmlns="http://schemas.microsoft.com/2004/06/ServiceModel/Management/MessageTrace">
<StatusCode>InternalServerError</StatusCode>
<StatusDescription>Internal Server Error</StatusDescription>
<WebHeaders>
<Content-Length>730</Content-Length>
<Cache-Control>private</Cache-Control>
<Content-Type>text/xml; charset=utf-8</Content-Type>
<Date>Sat, 03 Jan 2015 12:12:24 GMT</Date>
<Server>Microsoft-IIS/7.5</Server>
<X-AspNet-Version>4.0.30319</X-AspNet-Version>
<X-Powered-By>ASP.NET</X-Powered-By>
</WebHeaders>
</HttpResponse>
<s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/">
<s:Header></s:Header>
<s:Body>
<s:Fault>
<faultcode xmlns:a="http://schemas.microsoft.com/net/2005/12/windowscommunicationfoundation/dispatcher" xmlns="">a:InternalServiceFault</faultcode>
<faultstring xml:lang="en-US" xmlns="">The server was unable to process the request due to an internal error. For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute
or from the <serviceDebug> configuration behavior) on the server in order to send the exception information back to the client, or turn on tracing as per the Microsoft .NET Framework SDK documentation and inspect the server trace logs.</faultstring>
</s:Fault>
</s:Body>
</s:Envelope>
</MessageLogTraceRecord>
Try to understand but could not understand because i'am new to wcf services. Please help me to find the error details.
Thanks in advance
Regards
rax227
Hi Mohan,
I didn't use Fiddler before, I just download and use it but how to see the request message from this software?
I have logged the request to event log before send to web service and copy this request from event log to testing with soapUI, so I don't think have between the actual messages being sent to your client via orchestration and soapui. In the log Response shape
I see the fault response in event log.
You can see
this link to know how to use fiddler. As I suggested above the error you need to check is at the server side who is hosting the service( your party ) because you are getting fault response properly from them. The webservice you are calling seems to look
like WCF service too. Your life would have been so easier if you could ask them to have firewall open from your dev box to their dev server so that you can use use "Add Service Reference" wizard, that even they have .NET wcf service too.
Did you by any chance manage to talk to them what they are getting or if they can increase the exception details in the fault message for you?
If this answers your question please mark it as Answer and if this post is helpful, please vote as helpful. Thanks ! -
Oracle ODBC - Internal Error - unable to initialize NLS during driver load
I'm having some trouble with my ODBC connections which I hope someone can please help me with!
About 6 weeks ago all was working as normal.
As far as I know there have been no updates to the ORacle DB, the Windows XP operating system or the ODBC Drivers.
Today when I opened access and visual case 2 to connect to Oracle I was at first greeted with a:
unable to connect SQLState=IM004 SQL_HANDLE_ENV
error. ODBC also kept crashing.
I restarted the computer and was confronted with a different error:
odbc SQLSTate 08004 ORA 12154 TNS could not resolve the connect identifier specified
I was able to fix this error by setting the environment variable TNS_ADMIN in windows xp environment variables. I'm extremely confused about how this happened though as it was working and I don't think anything has changed.
I was then able to connect to the database via Microsoft Access but when I opened Visual Case 2 and tried to make an update, I was confronted with the following error:
Oracle ODBC Driver - internal error - unable to initialize NLS during driver load
I looked in the registry at:
HKEY_LOCAL_MACHINE\SOFTWARE\Oracle\KEY_OraClient10g_home1
HKEY_LOCAL_MACHINE\SOFTWARE\Oracle\KEY_OraClient10g_home2
HKEY_LOCAL_MACHINE\SOFTWARE\Oracle\KEY_OraDb10g_home1
and NLS_LANG was set to "AMERICAN_AMERICA.WE8MSWIN1252" in all 3 places.
(Though KEY_OraClient10g_home2 only had 4 entries as opposed to KEY_OraClient10g_home1's 13 entries)...
Since I made those changes I can no longer connect through Access.
I just receive a ODBC - connection to 'xxx' failed
Advice greatly appreciated!!!!
Edited by: user11150264 on Aug 25, 2009 10:21 PMActually it sort of does...
I switched the ODBC connection to use instant client and now it's all working again.
The biggest mystery is what changed to make it suddenly stop working the old way... -
"An internal error has occurred" message when scanning from MX922 to desktop using Windows 7
I am no longer able to scan using my MX922 connected to my desktop running Windows 7 without getting a message on my desktop saying "An internal error has occurred". I have turned the MX922 on and off, I have disconnected both the power cord and USB cable from the MX922 and from my desktop, I have reconnected the USB cable to a different port on my desktop, I have uninstalled all Canon programs from my desktop and reloaded all Canon programs with the MX922 CD, and I have restarted the desktop multiple times. I scan documents several times a week for my business. It has worked fine until today. What do I need to do to correct this problem and get back to scanning?
Hi boisseaujm,
If you temporarily disable any antivirus or firewall software that is on your computer, then attempt to scan again, are you able to scan successfully?
If this is a time-sensitive matter, additional support options are available at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well. -
I am receiving this error message when trying to export pictures: 'Unable to Export": An internal error has occured: Win32 API error 2 ( "The system cannot find the file specified.") when calling ShellExecuteExW from AgWorkspace.shellExecute.// I have a HP ENVY Phoenix, fully loaded, 1 1/2 years old.
Nevermind I fixed it. Thank you.
-
I am having problems backing up data with DPM 2012. I keep getting this meesage. The protection agent on dpmServer was temporarily unable to respond because it was in an unexpected state. (ID 60 Details: Internal error code: 0x809909B0)
I can't understand what my error logs are trying to tell me please help.
NORMAL Begin new execution batch at task:(True)-a2c49c70-696b-423d-8aaf-7898c1feb403
042C 28E0
10/07 22:47:42.979
16 ActiveJob.cs(851)
NORMAL Dispatching task for execution:True-a2c49c70-696b-423d-8aaf-7898c1feb403
042C 2AAC
10/07 22:47:42.979
16 ActiveJob.cs(581)
NORMAL Begin ExecuteTask:JobID=eab9800f-4eb7-46b2-83bc-c2ff2c6adb0d, ItemID=a2c49c70-696b-423d-8aaf-7898c1feb403
042C 2AAC
10/07 22:47:42.990
27 DatasourceServerTypeLock.cs(395)
NORMAL Server e9a3e229-5f73-4223-845f-e2038860e74b is not already registed to Acquire a lock, Registering the server now for the task a2c49c70-696b-423d-8aaf-7898c1feb403, IsDatasoureServerTypeLockNeeded = False
042C 2AAC
10/07 22:47:42.991
01 DPMTaskController.cs(70)
A2C49C70-696B-423D-8AAF-7898C1FEB403
NORMAL (job=eab9800f-4eb7-46b2-83bc-c2ff2c6adb0d, taskId=a2c49c70-696b-423d-8aaf-7898c1feb403) DPMTaskControllerHelper : ExecuteTask - CheckTaskStatus returned ReadyToExecute
042C 2AAC
10/07 22:47:42.993
01 TaskExecutor.cs(692)
A2C49C70-696B-423D-8AAF-7898C1FEB403
NORMAL Setting up Fsm: verb[3d859d8c-d0bb-4142-8696-c0d215203e0d]
042C 2AAC
10/07 22:47:43.009
27 CommonLoop.cs(343)
A2C49C70-696B-423D-8AAF-7898C1FEB403
NORMAL DatamovePollingCmdTimeoutInMin = 30
042C 2AAC
10/07 22:47:43.009
27 CommonLoop.cs(343)
A2C49C70-696B-423D-8AAF-7898C1FEB403
NORMAL DatamovePollingCmdTimeoutInMin = 30
042C 2AAC
10/07 22:47:43.021
01 TaskExecutor.cs(487)
A2C49C70-696B-423D-8AAF-7898C1FEB403
NORMAL ExecuteTask(job=eab9800f-4eb7-46b2-83bc-c2ff2c6adb0d) - Starting task instance
042C 092C
10/07 22:47:43.023
02 EventManager.cs(98)
A2C49C70-696B-423D-8AAF-7898C1FEB403
NORMAL Publishing event from TaskInstance.cs(406): TaskStart, [TaskID=a2c49c70-696b-423d-8aaf-7898c1feb403]
042C 092C
10/07 22:47:43.115
01 TaskInstance.cs(442)
A2C49C70-696B-423D-8AAF-7898C1FEB403
NORMAL Task: Initial transition enqueued, startState='Backup.StartState'
042C 1A54
10/07 22:47:43.116
27 BackupMachine.cs(1919)
A2C49C70-696B-423D-8AAF-7898C1FEB403
ACTIVITY BackupMachine : Starting machine execution
042C 2FC8
10/07 22:47:43.135
27 FindPrincipalServerBlock.cs(245)
A2C49C70-696B-423D-8AAF-7898C1FEB403
NORMAL Found Principal server for DatasourceId = a87a4dea-2e19-4456-ae3b-e5ce01c10351 Server= fs.org
042C 2AAC
10/07 22:47:43.146
27 DatasourceServerTypeLock.cs(395)
A2C49C70-696B-423D-8AAF-7898C1FEB403
NORMAL Server e9a3e229-5f73-4223-845f-e2038860e74b is not already registed to Acquire a lock, Registering the server now for the task a2c49c70-696b-423d-8aaf-7898c1feb403, IsDatasoureServerTypeLockNeeded = False
042C 2AAC
10/07 22:47:43.147
27 OperationTypeLock.cs(582)
A2C49C70-696B-423D-8AAF-7898C1FEB403
NORMAL In LockServer() of ReplicationOperationTypeLock, returning lockStatus = AcquiredLock
042C 2AAC
10/07 22:47:43.156
27 OperationTypeLock.cs(628)
A2C49C70-696B-423D-8AAF-7898C1FEB403
NORMAL UnlockServer() of ReplicationOperationTypeLock, returning
042C 2AAC
10/07 22:47:43.159
27 OperationTypeLock.cs(224)
A2C49C70-696B-423D-8AAF-7898C1FEB403
NORMAL Setting detailed error for operation lock failure to = PrmReplicaAgentDirtyShutdownDetected
042C 2AAC
10/07 22:47:43.160
27 OperationTypeLock.cs(487)
A2C49C70-696B-423D-8AAF-7898C1FEB403
NORMAL In Lock() of ReplicationOperationTypeLock, returning lockStatus = DoNotWaitToAcquireLock
042C 2AAC
10/07 22:47:43.162
27 CheckConcurrencyBlock.cs(151)
A2C49C70-696B-423D-8AAF-7898C1FEB403
NORMAL Check concurrency block - Failure (abortedOnConflictingServerOperation=True)
042C 1F90
10/07 22:47:43.165
27 FsmBlock.cs(130)
A2C49C70-696B-423D-8AAF-7898C1FEB403
WARNING Backup.CheckConcurrency.PT : <-- Exited FSM block with FAILURE (errorCode = ReplicaInvalidWithReason)
042C 1F90
10/07 22:47:43.419
27 BackupMachine.cs(2156)
A2C49C70-696B-423D-8AAF-7898C1FEB403
WARNING BackupMachine : FAILURE - BACKUP, errorCode=ReplicaInvalidWithReason
042C 1F90
10/07 22:47:43.422
01 TaskInstance.cs(798)
A2C49C70-696B-423D-8AAF-7898C1FEB403
WARNING Task Diagnostic Information - <?xml version="1.0" encoding="utf-16"?>
042C 1F90
10/07 22:47:43.422
01 TaskInstance.cs(798)
A2C49C70-696B-423D-8AAF-7898C1FEB403
WARNING <TaskExecutionContext>
042C 1F90
10/07 22:47:43.422
01 TaskInstance.cs(798)
A2C49C70-696B-423D-8AAF-7898C1FEB403
WARNING <PrmWriterId>00000000-0000-0000-0000-000000000000</PrmWriterId>
042C 1F90
10/07 22:47:43.422
01 TaskInstance.cs(798)
A2C49C70-696B-423D-8AAF-7898C1FEB403
WARNING <PrmDatasourceId>a87a4dea-2e19-4456-ae3b-e5ce01c10351</PrmDatasourceId>
042C 1F90
10/07 22:47:43.422
01 TaskInstance.cs(798)
A2C49C70-696B-423D-8AAF-7898C1FEB403
WARNING <PrmActiveNodeName>skafs.srvs.org</PrmActiveNodeName>
042C 1F90
10/07 22:47:43.422
01 TaskInstance.cs(798)
A2C49C70-696B-423D-8AAF-7898C1FEB403
WARNING <PrmLogicalReplicaId>342784c2-f783-487d-be78-154a5a17193f</PrmLogicalReplicaId>
042C 1F90
10/07 22:47:43.422
01 TaskInstance.cs(798)
A2C49C70-696B-423D-8AAF-7898C1FEB403
WARNING <PrmDatasetId>0cbb5339-0af5-4e70-9882-ed118a191890</PrmDatasetId>
042C 1F90
10/07 22:47:43.422
01 TaskInstance.cs(798)
A2C49C70-696B-423D-8AAF-7898C1FEB403
WARNING <PrmPhysicalReplicaId>f440f18e-9436-4fed-9e7c-96cc1a9ebec1</PrmPhysicalReplicaId>
042C 1F90
10/07 22:47:43.422
01 TaskInstance.cs(798)
A2C49C70-696B-423D-8AAF-7898C1FEB403
WARNING <PrmReplicaValidity>Invalid</PrmReplicaValidity>
042C 1F90
10/07 22:47:43.422
01 TaskInstance.cs(798)
A2C49C70-696B-423D-8AAF-7898C1FEB403
WARNING <PrmReplicaStatus>Idle</PrmReplicaStatus>
042C 1F90
10/07 22:47:43.422
01 TaskInstance.cs(798)
A2C49C70-696B-423D-8AAF-7898C1FEB403
WARNING <PrmOwnerLockId>00000000-0000-0000-0000-000000000000</PrmOwnerLockId>
042C 1F90
10/07 22:47:43.422
01 TaskInstance.cs(798)
A2C49C70-696B-423D-8AAF-7898C1FEB403
WARNING <TEVerb>DeltaReplicate</TEVerb>
042C 1F90
10/07 22:47:43.422
01 TaskInstance.cs(798)
A2C49C70-696B-423D-8AAF-7898C1FEB403
WARNING <TEErrorState>Backup.CheckConcurrencyPending</TEErrorState>
042C 1F90
10/07 22:47:43.422
01 TaskInstance.cs(798)
A2C49C70-696B-423D-8AAF-7898C1FEB403
WARNING <TEErrorDetails><?xml version="1.0" encoding="utf-16"?>
042C 1F90
10/07 22:47:43.422
01 TaskInstance.cs(798)
A2C49C70-696B-423D-8AAF-7898C1FEB403
WARNING <q1:ErrorInfo ErrorCode="1073774947" DetailedCode="0" DetailedSource="0" ExceptionDetails="" xmlns:q1="http://schemas.microsoft.com/2003/dls/GenericAgentStatus.xsd">
042C 1F90
10/07 22:47:43.422
01 TaskInstance.cs(798)
A2C49C70-696B-423D-8AAF-7898C1FEB403
WARNING <q1:Parameter Name="datasourceid" Value="a87a4dea-2e19-4456-ae3b-e5ce01c10351" />
042C 1F90
10/07 22:47:43.422
01 TaskInstance.cs(798)
A2C49C70-696B-423D-8AAF-7898C1FEB403
WARNING <q1:Parameter Name="dpmerrorcode" Value="30187" />
042C 1F90
10/07 22:47:43.422
01 TaskInstance.cs(798)
A2C49C70-696B-423D-8AAF-7898C1FEB403
WARNING <q1:Parameter Name="protectedgroup" Value="fs" />
042C 1F90
10/07 22:47:43.422
01 TaskInstance.cs(798)
A2C49C70-696B-423D-8AAF-7898C1FEB403
WARNING <q1:Parameter Name="datasourcename" Value="P:\" />
042C 1F90
10/07 22:47:43.422
01 TaskInstance.cs(798)
A2C49C70-696B-423D-8AAF-7898C1FEB403
WARNING <q1:Parameter Name="servername" Value="fs.org" />
042C 1F90
10/07 22:47:43.422
01 TaskInstance.cs(798)
A2C49C70-696B-423D-8AAF-7898C1FEB403
WARNING <q1:Parameter Name="replicaid" Value="342784c2-f783-487d-be78-154a5a17193f" />
042C 1F90
10/07 22:47:43.422
01 TaskInstance.cs(798)
A2C49C70-696B-423D-8AAF-7898C1FEB403
WARNING </q1:ErrorInfo></TEErrorDetails>
042C 1F90
10/07 22:47:43.422
01 TaskInstance.cs(798)
A2C49C70-696B-423D-8AAF-7898C1FEB403
WARNING </TaskExecutionContext>
042C 1F90
10/07 22:47:43.423
02 EventManager.cs(98)
A2C49C70-696B-423D-8AAF-7898C1FEB403
NORMAL Publishing event from TaskInstance.cs(823): TaskStop, [TaskID=a2c49c70-696b-423d-8aaf-7898c1feb403]
042C 1F90
10/07 22:47:43.446
01 TaskExecutor.cs(843)
A2C49C70-696B-423D-8AAF-7898C1FEB403
FATAL Task stopped (state=Failed, error=ReplicaInvalidWithReason; 0; None), search "Task Diagnostic Information" for details.
042C 1F90
10/07 22:47:43.457
16 ActiveJob.cs(745)
WARNING Fail: Task 'a2c49c70-696b-423d-8aaf-7898c1feb403' failed with error during execution.
042C 1F90
10/07 22:47:43.457
16 Task.cs(235)
NORMAL Changing task state from 'GenerateWorkplan' -> 'Failed' (a2c49c70-696b-423d-8aaf-7898c1feb403)Same problem on our two file-server: "The protection agent on was temporarily unable to respond because it was in an unexpected state. (ID 60 Details: Internal error code: 0x809909B0)"
Problem started about 04 October 2013.
DPM Server and agents: 4.1.3417
There is event in fileservers application log:
Log Name: Application
Source: Application Error
Date: 09.10.2013 17:15:17
Event ID: 1000
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: host1.ourlocaldomain.local
Description:
Faulting application name: DPMRA.exe, version: 4.1.3417.0, time stamp: 0x52011087
Faulting module name: FileWriterHelperPlugin.DLL, version: 4.1.3313.0, time stamp: 0x50ad994d
Exception code: 0xc0000005
Fault offset: 0x000000000002ba9f
Faulting process id: 0xe7c
Faulting application start time: 0x01cec4d870046a62
Faulting application path: C:\Program Files\Microsoft Data Protection Manager\DPM\bin\DPMRA.exe
Faulting module path: C:\Program Files\Microsoft Data Protection Manager\DPM\bin\FileWriterHelperPlugin.DLL
Report Id: b1b1f6ed-30cb-11e3-acc1-00155d079701
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-10-09T10:15:17.000000000Z" />
<EventRecordID>109798</EventRecordID>
<Channel>Application</Channel>
<Computer>host1.ourlocaldomain.local</Computer>
<Security />
</System>
<EventData>
<Data>DPMRA.exe</Data>
<Data>4.1.3417.0</Data>
<Data>52011087</Data>
<Data>FileWriterHelperPlugin.DLL</Data>
<Data>4.1.3313.0</Data>
<Data>50ad994d</Data>
<Data>c0000005</Data>
<Data>000000000002ba9f</Data>
<Data>e7c</Data>
<Data>01cec4d870046a62</Data>
<Data>C:\Program Files\Microsoft Data Protection Manager\DPM\bin\DPMRA.exe</Data>
<Data>C:\Program Files\Microsoft Data Protection Manager\DPM\bin\FileWriterHelperPlugin.DLL</Data>
<Data>b1b1f6ed-30cb-11e3-acc1-00155d079701</Data>
</EventData>
</Event>
Log Name: Application
Source: Application Error
Date: 09.10.2013 17:15:22
Event ID: 1000
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: host2.ourlocaldomain.local
Description:
Faulting application name: DPMRA.exe, version: 4.1.3417.0, time stamp: 0x52011087
Faulting module name: FileWriterHelperPlugin.DLL, version: 4.1.3313.0, time stamp: 0x50ad994d
Exception code: 0xc0000005
Fault offset: 0x000000000002ba9f
Faulting process id: 0x71c
Faulting application start time: 0x01cec4d870669e98
Faulting application path: C:\Program Files\Microsoft Data Protection Manager\DPM\bin\DPMRA.exe
Faulting module path: C:\Program Files\Microsoft Data Protection Manager\DPM\bin\FileWriterHelperPlugin.DLL
Report Id: b4680c67-30cb-11e3-ba10-001dd8b71c0e
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-10-09T10:15:22.000000000Z" />
<EventRecordID>54725</EventRecordID>
<Channel>Application</Channel>
<Computer>host2.ourlocaldomain.local</Computer>
<Security />
</System>
<EventData>
<Data>DPMRA.exe</Data>
<Data>4.1.3417.0</Data>
<Data>52011087</Data>
<Data>FileWriterHelperPlugin.DLL</Data>
<Data>4.1.3313.0</Data>
<Data>50ad994d</Data>
<Data>c0000005</Data>
<Data>000000000002ba9f</Data>
<Data>71c</Data>
<Data>01cec4d870669e98</Data>
<Data>C:\Program Files\Microsoft Data Protection Manager\DPM\bin\DPMRA.exe</Data>
<Data>C:\Program Files\Microsoft Data Protection Manager\DPM\bin\FileWriterHelperPlugin.DLL</Data>
<Data>b4680c67-30cb-11e3-ba10-001dd8b71c0e</Data>
</EventData>
</Event> -
After clicking in email link, I get the following message on Firefox page : " The application cannot proceed!
An internal error occured. Please contact your administrator and describe the steps you took before you encounter this error message.Error msg: Unable to connect to the database. Please make sure the database information specified in admin/includes/config.php are correct."
The email asked to install the latest Adobe Flashplayer version to have it working. I installed it, also updated my plug-ins and checked in safe mode that the extensions were not the problem. I also deleted the cookies an cache. Nothing seems to be working so far. I have the lastest version of Firefox 8.0.1 as well as Roboform 7. I noticed that the latest Firefox version has (x86) tagged to it. Does it refers to an 86 bits because my computer uses 32 or 64 bits only. I tried also different browsers and the message kept appearing. How do I resolve this problem?Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
* Tools > Options > Privacy > Cookies: "Show Cookies" -
RICS0001:Internal Error,unable to process the collected data from the device.
Hi all,
I've got the following error in Inventory Collection: 'RICS0001:Internal Error,unable to process the collected data from the device.'
System is CW LMS 2.6
If I search the web I get the following Cisco document:
http://www.cisco.com/en/US/products/sw/cscowork/ps2073/prod_troubleshooting_guide09186a008036dff2.html
'...in the log directory look for IC_Server.log.'
IC_Server.log:
[ Di Nov 16 15:54:27 CET 2010 ],INFO ,[Thread-25],com.cisco.nm.rmeng.inventory.ics.core.ICSCore,173,Got Async Request, User Name :admin
[ Di Nov 16 15:54:27 CET 2010 ],INFO ,[Thread-25],com.cisco.nm.rmeng.inventory.ics.core.ICSCore,179,Request ID is : 1289919235488
[ Di Nov 16 15:54:27 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.inventory.ics.core.CollectionController,309,Started processing device ID: 3341
[ Di Nov 16 15:54:27 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.util.logger.RMELogger,724,com.cisco.nm.rmeng.util.db.DatabaseConnectionPool,getConnection,59,Inside ICSDatabaseConnection, MAX_COUNT =20
[ Di Nov 16 15:54:28 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.inventory.ics.core.CollectionController,387,Started processing device Name: 9.152.255.101
[ Di Nov 16 15:54:28 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.util.logger.XDILogger,77,com.cisco.nm.xms.xdi.pkgs.SharedInventoryCatIOS.ContainmentAGI_ENTITY_Mib_Non_Modular,g$eval,103,com.cisco.nm.xms.xdi.pkgs.SharedInventoryRouter:ContainmentAGI_ENTITY_Mib_Non_Modular:g$eval:populating ContainmentAG attributes, begins...
[ Di Nov 16 15:54:28 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.util.logger.XDILogger,77,com.cisco.nm.xms.xdi.pkgs.SharedInventoryCatIOS.ContainmentAGI_ENTITY_Mib_Non_Modular,populatingTheChassis,110,com.cisco.nm.xms.xdi.pkgs.SharedInventoryRouter:ContainmentAGI_ENTITY_Mib_Non_Modular:populatingTheChassis:ContainmentAG attributes,collection from the device begins...
[ Di Nov 16 15:54:29 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.util.logger.XDILogger,77,com.cisco.nm.xms.xdi.pkgs.SharedInventoryCatIOS.ContainmentAGI_ENTITY_Mib_Non_Modular,populatingTheChassis,147,com.cisco.nm.xms.xdi.pkgs.SharedInventoryRouter:ContainmentAGI_ENTITY_Mib_Non_Modular:populatingTheChassis:ContainmentAG attributes,collection from the device successful...
[ Di Nov 16 15:54:29 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.util.logger.XDILogger,77,com.cisco.nm.xms.xdi.pkgs.SharedInventoryCatIOS.ContainmentAGI_ENTITY_Mib_Non_Modular,populatingTheChassis,149,com.cisco.nm.xms.xdi.pkgs.SharedInventoryRouter:ContainmentAGI_ENTITY_Mib_Non_Modular:populatingTheChassis:ContainmentAG attributes,population begins...
[ Di Nov 16 15:54:29 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.util.logger.XDILogger,77,com.cisco.nm.xms.xdi.pkgs.SharedInventoryCatIOS.ContainmentAGI_ENTITY_Mib_Non_Modular,populatingTheChassis,216,com.cisco.nm.xms.xdi.pkgs.SharedInventoryRouter:ContainmentAGI_ENTITY_Mib_Non_Modular:populatingTheChassis:Before method getSlotsConfiguredStatistics
[ Di Nov 16 15:54:29 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.util.logger.XDILogger,77,com.cisco.nm.xms.xdi.pkgs.SharedInventoryCatIOS.ContainmentAGI_ENTITY_Mib_Non_Modular,populatingTheChassis,225,com.cisco.nm.xms.xdi.pkgs.SharedInventoryRouter:ContainmentAGI_ENTITY_Mib_Non_Modular:populatingTheChassis:After method getSlotsConfiguredStatistics
[ Di Nov 16 15:54:29 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.util.logger.XDILogger,77,com.cisco.nm.xms.xdi.pkgs.SharedInventoryCatIOS.ContainmentAGI_ENTITY_Mib_Non_Modular,populatingTheChassis,245,com.cisco.nm.xms.xdi.pkgs.SharedInventoryRouter:ContainmentAGI_ENTITY_Mib_Non_Modular:populatingTheChassis:ContainmentAG attributes,population completed...
[ Di Nov 16 15:54:29 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.util.logger.XDILogger,77,com.cisco.nm.xms.xdi.pkgs.SharedInventoryCatIOS.ContainmentAGI_ENTITY_Mib_Non_Modular,g$eval,105,com.cisco.nm.xms.xdi.pkgs.SharedInventoryRouter:ContainmentAGI_ENTITY_Mib_Non_Modular:g$eval:populating ContainmentAG attributes, ends...
[ Di Nov 16 15:54:43 CET 2010 ],INFO ,[Thread-14],com.cisco.nm.rmeng.inventory.ics.core.CollectionController,477,DP time is 15 seconds for 9.152.255.101
[ Di Nov 16 15:54:44 CET 2010 ],ERROR,[Thread-14],com.cisco.nm.rmeng.util.logger.RMELogger,770,com.cisco.nm.rmeng.inventory.ics.invchange.AddInvChange,effect,33,Unexpected error :com.sybase.jdbc2.jdbc.SybSQLException: ASA Fehler -193: Primärschlüssel für Tabelle 'PhysicalElement' ist nicht eindeutig
at com.sybase.jdbc2.tds.Tds.processEed(Tds.java:2834)
at com.sybase.jdbc2.tds.Tds.nextResult(Tds.java:2156)
at com.sybase.jdbc2.jdbc.ResultGetter.nextResult(ResultGetter.java:69)
at com.sybase.jdbc2.jdbc.SybStatement.nextResult(SybStatement.java:220)
at com.sybase.jdbc2.jdbc.SybStatement.nextResult(SybStatement.java:203)
at com.sybase.jdbc2.jdbc.SybStatement.executeLoop(SybStatement.java:1766)
at com.sybase.jdbc2.jdbc.SybStatement.execute(SybStatement.java:1758)
at com.sybase.jdbc2.jdbc.SybPreparedStatement.execute(SybPreparedStatement.java:619)
at com.cisco.nm.rmeng.inventory.ics.dbrep.DBRecord.insert(DBRecord.java:50)
at com.cisco.nm.rmeng.inventory.ics.util.ICSDatabaseConnection.insert(ICSDatabaseConnection.java:91)
at com.cisco.nm.rmeng.inventory.ics.invchange.AddInvChange.effect(AddInvChange.java:29)
at com.cisco.nm.rmeng.inventory.ics.server.InvDataProcessor.processInvData(InvDataProcessor.java:394)
at com.cisco.nm.rmeng.inventory.ics.core.CollectionController.run(CollectionController.java:849)
at java.lang.Thread.run(Thread.java:534)
[ Di Nov 16 15:54:44 CET 2010 ],ERROR,[Thread-14],com.cisco.nm.rmeng.inventory.ics.server.InvDataProcessor,448,ASA Fehler -193: Primärschlüssel für Tabelle 'PhysicalElement' ist nicht eindeutig
com.sybase.jdbc2.jdbc.SybSQLException: ASA Fehler -193: Primärschlüssel für Tabelle 'PhysicalElement' ist nicht eindeutig
at com.sybase.jdbc2.tds.Tds.processEed(Tds.java:2834)
at com.sybase.jdbc2.tds.Tds.nextResult(Tds.java:2156)
at com.sybase.jdbc2.jdbc.ResultGetter.nextResult(ResultGetter.java:69)
at com.sybase.jdbc2.jdbc.SybStatement.nextResult(SybStatement.java:220)
at com.sybase.jdbc2.jdbc.SybStatement.nextResult(SybStatement.java:203)
at com.sybase.jdbc2.jdbc.SybStatement.executeLoop(SybStatement.java:1766)
at com.sybase.jdbc2.jdbc.SybStatement.execute(SybStatement.java:1758)
at com.sybase.jdbc2.jdbc.SybPreparedStatement.execute(SybPreparedStatement.java:619)
at com.cisco.nm.rmeng.inventory.ics.dbrep.DBRecord.insert(DBRecord.java:50)
at com.cisco.nm.rmeng.inventory.ics.util.ICSDatabaseConnection.insert(ICSDatabaseConnection.java:91)
at com.cisco.nm.rmeng.inventory.ics.invchange.AddInvChange.effect(AddInvChange.java:29)
at com.cisco.nm.rmeng.inventory.ics.server.InvDataProcessor.processInvData(InvDataProcessor.java:394)
at com.cisco.nm.rmeng.inventory.ics.core.CollectionController.run(CollectionController.java:849)
at java.lang.Thread.run(Thread.java:534)
[ Di Nov 16 15:54:44 CET 2010 ],ERROR,[Thread-14],com.cisco.nm.rmeng.inventory.ics.core.CollectionController,861, Exception occured in process method while processing: 9.152.255.101 ASA Fehler -193: Primärschlüssel für Tabelle 'PhysicalElement' ist nicht eindeutig
ICSException :: ASA Fehler -193: Primärschlüssel für Tabelle 'PhysicalElement' ist nicht eindeutig
at com.cisco.nm.rmeng.inventory.ics.server.InvDataProcessor.processInvData(InvDataProcessor.java:463)
at com.cisco.nm.rmeng.inventory.ics.core.CollectionController.run(CollectionController.java:849)
at java.lang.Thread.run(Thread.java:534)
I don't know where the German error message comes from. The whole system is English. Translation is: "ASA error -192: primary key for table 'PhysicalElement' isn't distinct'
Thanks for your help!
AlexWell known issue in LMS 2.6. Most likely you are hitting CSCsm97530. As a temporary solution you could remove and re-add problematic device from CS. To get a permanent fix you need a patch (provided by TAC).
-
Unable to export: an internal error has occurred
Hi, everybody,
Just when I was trying to convince myself that I should NOT go back to LR2, no matter how ugly the new import interface is, I tried my first export and this is all I get:
- ping
- UNABLE TO EXPORT: AN INTERNAL ERROR HAS OCCURRED ?:0 ATTEMPT TO INDEX NIL VALUE
I am using Vista up to date on a 64 bit system
Anybody else having this problem? any solutions?
Why, oh, why, did I not stick to the old efficient and working LR2, the noise reduction filter lured me into this messSolution - try to limit the number of files you are exporting. I came to this forum as I was running into the same problem, but I worked it out for myself. It appears the ability to export multiple files is limited, either by number or by memory. I'm running Vista with 4GB, and I was limited to around 100 files at a time. So I broke my export into a number of smaller exports of around 100 files each, and it worked.
I tried the other solutions - syncing metadata, writing metadata to files, no plugins, etc., and none of those propositions worked. The only thing that worked was limiting the scope of the export. -
ORA-20079: WM internal error [unable to rename table]
Hi,
I am getting following error when i try to enable versioning on a table. Any idea how to resolve it ?
BEGIN DBMS_WM.EnableVersioning('TestTable'); END;
ERROR at line 1:
ORA-20079: WM internal error [unable to rename table]
ORA-06512: at "SYS.LTDDL", line 1615
ORA-06512: at "SYS.LTDDL", line 1193
ORA-06512: at "SYS.LT", line 647
ORA-06512: at "SYS.LT", line 8024
ORA-06512: at line 1
thanks
-naHi,
You need to determine the original error that is being generated by oracle. This can be done by attempting to rename the table yourself. For example:
SQL> alter table TestTable rename to RenamedTable ;
That will give you a better understanding as to why Workspace Manager is unable to rename the table. Also, what version of the database and workspace manager are you using ?
If the direct rename succeeds while enableversioning continues to fail, then you would need to file a TAR on this.
Regards,
Ben -
CORE4005: Internal error: unable to create JVM
Hi,
Can't start-up the domain domain1 after I've installed AppServ 7.0 for W2000. This is the installation log and the admin-server instance log file with the debug set to FINEST.
Install log :
INFO - Start core server configuration.
INFO - Domain successfully created
INFO - Server instance successfully created
WARNING - SNMP subagent installation did not succeed
INFO - End core server configuration.
INFO - Start samples configuration.
INFO - End samples configuration.
INFO - Start Sun ONE Messaging Queue configuration
INFO - End Sun ONE Messaging Queue configuration
INFO - Start PointBase configuration
INFO - End PointBase configuration
and admin-server instance log file :
[29/Sep/2003:17:17:04] INFO ( 1504): CORE1116: Sun ONE Application Server 7.0.0_01
[29/Sep/2003:17:17:10] FINE ( 1504): HTTP5169: User authentication cache entries expire in 120 seconds.
[29/Sep/2003:17:17:10] FINE ( 1504): HTTP5170: User authentication cache holds 200 users
[29/Sep/2003:17:17:10] FINE ( 1504): HTTP5171: Up to 4 groups are cached for each cached user.
[29/Sep/2003:17:17:10] FINE ( 1504): HTTP4207: file cache module initialized (API versions 1 through 1)
[29/Sep/2003:17:17:10] FINE ( 1504): HTTP4302: file cache has been initialized
[29/Sep/2003:17:17:10] FINE ( 1504): HTTP3063: KeepAliveTimeout is 30 seconds (default value)
[29/Sep/2003:17:17:10] FINE ( 1504): HTTP3067: PostThreadsEarly set to off
[29/Sep/2003:17:17:10] FINE ( 1504): HTTP3066: MaxKeepAliveConnections set to 256
[29/Sep/2003:17:17:11] FINE ( 1504): Installed configuration 1
[29/Sep/2003:17:17:11] FINE ( 1504): jvm stickyAttach: 1
[29/Sep/2003:17:17:11] FINE ( 1504): jvm option: -DJAVA_HOME=D:/Sun/AppServer7/jdk
[29/Sep/2003:17:17:11] FINE ( 1504): jvm option: -Dcom.sun.aas.installRoot=D:/Sun/AppServer7
[29/Sep/2003:17:17:11] FINE ( 1504): jvm option: -Dcom.sun.aas.instanceRoot=D:\Sun\AppServer7\domains\domain1
[29/Sep/2003:17:17:11] FINE ( 1504): jvm option: -Duser.language=fr
[29/Sep/2003:17:17:11] FINE ( 1504): jvm option: -Duser.country=FR
[29/Sep/2003:17:17:11] FINE ( 1504): jvm option: exit
[29/Sep/2003:17:17:11] FINE ( 1504): jvm option: vfprintf
[29/Sep/2003:17:17:11] FINE ( 1504): jvm option: -Dorg.xml.sax.parser=org.xml.sax.helpers.XMLReaderAdapter
[29/Sep/2003:17:17:11] FINE ( 1504): jvm option: -Dorg.xml.sax.driver=org.apache.crimson.parser.XMLReaderImpl
[29/Sep/2003:17:17:11] FINE ( 1504): jvm option: -Djava.security.policy=D:/Sun/AppServer7/domains/domain1/admin-server/config/server.policy
[29/Sep/2003:17:17:11] FINE ( 1504): jvm option: -Djava.security.auth.login.config=D:/Sun/AppServer7/domains/domain1/admin-server/config/login.conf
[29/Sep/2003:17:17:11] FINE ( 1504): jvm option: -Dcom.sun.jdo.api.persistence.model.multipleClassLoaders=reload
[29/Sep/2003:17:17:11] FINE ( 1504): jvm option: -Djava.util.logging.manager=com.iplanet.ias.server.logging.ServerLogManager
[29/Sep/2003:17:17:11] FINE ( 1504): jvm option: -Dcom.sun.aas.configRoot=D:/Sun/AppServer7\config
[29/Sep/2003:17:17:11] FINE ( 1504): jvm option: -Dcom.sun.aas.perlRoot=D:\Sun\AppServer7\lib\perl
[29/Sep/2003:17:17:11] FINE ( 1504): jvm option: -Dcom.sun.aas.imqLib=D:\Sun\AppServer7\imq\lib
[29/Sep/2003:17:17:11] FINE ( 1504): jvm option: -Dcom.sun.aas.imqBin=D:\Sun\AppServer7\imq\bin
[29/Sep/2003:17:17:11] FINE ( 1504): jvm option: -Dcom.sun.aas.webServicesLib=D:\Sun\AppServer7\share\lib
[29/Sep/2003:17:17:11] FINE ( 1504): jvm option: -Dcom.sun.aas.icuLib=D:\Sun\AppServer7\bin
[29/Sep/2003:17:17:11] FINE ( 1504): jvm option: -Dcom.sun.aas.defaultLocale=fr_FR
[29/Sep/2003:17:17:11] FINE ( 1504): jvm option: -Dcom.sun.aas.verifier.xsl=D:/Sun/AppServer7/lib/verifier
[29/Sep/2003:17:17:11] FINE ( 1504): jvm option: -Xmx128m
[29/Sep/2003:17:17:11] FINE ( 1504): jvm option: -Dsun.rmi.dgc.server.gcInterval=3600000
[29/Sep/2003:17:17:11] FINE ( 1504): jvm option: -Djava.class.path=D:/Sun/AppServer7/lib/appserv-rt.jar;D:/Sun/AppServer7/jdk/lib/tools.jar;D:/Sun/AppServer7/lib/appserv-ext.jar;D:/Sun/AppServer7/lib/appserv-cmp.jar;D:\Sun\AppServer7\imq\lib/imq.jar;D:\Sun\AppServer7\imq\lib/imqadmin.jar;D:\Sun\AppServer7\imq\lib/imqutil.jar;D:/Sun/AppServer7/lib/appserv-admin.jar;D:/Sun/AppServer7/lib/appserv-ideplugin.jar;
[29/Sep/2003:17:17:11] FATAL ( 1504): CORE4005: Internal error: unable to create JVM
[29/Sep/2003:17:17:11] SEVERE ( 1504): CORE4009: Failed to load JVM (check your JRE)
[29/Sep/2003:17:17:11] SEVERE ( 1504): CORE3187: Late initialization failed: Error running init function(late) init-j2ee: unknown error
if anyone could help, I would apreciate
Thanks to allOk. I've managed to solve my problem. Thanks to everybody.
For anyone who is interested in here is the solution that fixed the error for me :
Because I had before installed JVM version 1.4.2 and then I uninstalled it and put the version 1.4.1_01, as the one that App Server 7.0 is using, the uninstaller has left a newer version of jvm.dll in WINNT/System32
After I've renamed this file to _jvm.dll (for example), just to get rid of it, the domain and his instances have started correctly.
Good luck!
Maybe you are looking for
-
Its been for years (starting from 10OS Version 10.2 ) I couldn't see filed/labeled emails in my Z30/Z10 Blackberry HUB of my Gmail account, but I just downloaded Blackberry Blend and it started to show all my filed/labeled emails, but I still cant se
-
Access denied error when not using Administrator Role
Hi, I configured a simple Transaction Iview, calling a CRM transaction but the information is only been displayed when the user has Administrator permisions but when the user has just the Role where the iview is located this error appears: iView : p
-
Does iDVD really take 6 HOURS to burn a DVD???
This is my first DVD to burn on the iMac. Previously I have used DVD Shrink on a Windows machine which took about 1 hour from rip to completed burn. I have already used the Hand Brake program to create a mp4 and I am using iDVD to burn a new DVD and
-
Repair permissions - always the same ones need repairing (Shockwave)
Each time I do a Repair Permissions after doing an installation (in this case Security 008 update for Intel on my MBP) the same permissions always are repaired and ONLY these. Here's the report I always get: Permissions differ on ./Library/Applicatio
-
UPGRADE STEPS FROM ECC 5.0 TO ECC 6.00
Hi, Can anyone of you help me in the upgrade steps (Process) from ECC 5.0 to ECC 6.0. Thanks in Advance. Ram