Unable to Schedule the Report with a user with Author Role.

Hi,
I tried to Schedule the Report using weblogic user(which has admin role) it worked perfectly. But when i try to login using User(which has author role) and when i try to schedule a report i am getting the following error. It is clustered Environment.
[nQSError: 77006] Oracle BI Presentation Server Error: A fatal error occurred while processing the request. The server responded with: Authentication Failure.
Error Codes: IHVF6OM7:OPR4ONWY:U9IM8TAC
Location: saw.connectionPool.getConnection, saw.securitysubsystem.checkauthentication.runimpl, saw.securitysubsystem.checkauthentication, saw.delivers.rpc.getDeviceContent, saw.rpc.server.responder, saw.rpc.server, saw.rpc.server.handleConnection, saw.rpc.server.dispatch, saw.threadpool.socketrpcserver, saw.threads
Odbc driver returned an error (SQLDriverConnectW).
State: 08004. Code: 10018. [NQODBC] [SQL_STATE: 08004] [nQSError: 10018] Access for the requested connection is refused.
[nQSError: 43113] Message returned from OBIS.
[nQSError: 13039] The impersonator does not exist in the BI Security Service. (08004)
Error Codes:
Location: saw.delivers.rpc.getDeviceContent, saw.rpc.server.responder, saw.rpc.server, saw.rpc.server.handleConnection, saw.rpc.server.dispatch, saw.threadpool.socketrpcserver, saw.threads
Error Codes: AGEGTYVF
AgentID: /users/richard/Test Mail Report
...Trying Agent Get Response Content loop again.... Sleeping for 8 seconds.[nQSError: 77006] Oracle BI Presentation Server Error: A fatal error occurred while processing the request. The server responded with: Authentication Failure.
Error Codes: IHVF6OM7:OPR4ONWY:U9IM8TAC
Location: saw.connectionPool.getConnection, saw.securitysubsystem.checkauthentication.runimpl, saw.securitysubsystem.checkauthentication, saw.delivers.rpc.getDeviceContent, saw.rpc.server.responder, saw.rpc.server, saw.rpc.server.handleConnection, saw.rpc.server.dispatch, saw.threadpool.socketrpcserver, saw.threads
Odbc driver returned an error (SQLDriverConnectW).
State: 08004. Code: 10018. [NQODBC] [SQL_STATE: 08004] [nQSError: 10018] Access for the requested connection is refused.
[nQSError: 43113] Message returned from OBIS.
[nQSError: 13039] The impersonator does not exist in the BI Security Service. (08004)
Error Codes:
Location: saw.delivers.rpc.getDeviceContent, saw.rpc.server.responder, saw.rpc.server, saw.rpc.server.handleConnection, saw.rpc.server.dispatch, saw.threadpool.socketrpcserver, saw.threads
Error Codes: AGEGTYVF
AgentID:/users/richard/Test Mail Report
...Trying Agent Get Response Content loop again.... Sleeping for 6 seconds.[nQSError: 77006] Oracle BI Presentation Server Error: A fatal error occurred while processing the request. The server responded with: Authentication Failure.
Error Codes: IHVF6OM7:OPR4ONWY:U9IM8TAC
Location: saw.connectionPool.getConnection, saw.securitysubsystem.checkauthentication.runimpl, saw.securitysubsystem.checkauthentication, saw.delivers.rpc.getDeviceContent, saw.rpc.server.responder, saw.rpc.server, saw.rpc.server.handleConnection, saw.rpc.server.dispatch, saw.threadpool.socketrpcserver, saw.threads
Odbc driver returned an error (SQLDriverConnectW).
State: 08004. Code: 10018. [NQODBC] [SQL_STATE: 08004] [nQSError: 10018] Access for the requested connection is refused.
[nQSError: 43113] Message returned from OBIS.
[nQSError: 13039] The impersonator does not exist in the BI Security Service. (08004)
Error Codes:
Location: saw.delivers.rpc.getDeviceContent, saw.rpc.server.responder, saw.rpc.server, saw.rpc.server.handleConnection, saw.rpc.server.dispatch, saw.threadpool.socketrpcserver, saw.threads
Error Codes: AGEGTYVF
AgentID: /users/richard/Test Mail Report
Exceeded number of request retries for method GetResponseContent.
Can any one help me with this.
Thanks
Rondo.
Edited by: RONDO on Dec 12, 2012 4:07 PM

Check the Doc ID 1446877.1
As per this doc Fix to apply patch 13553428:
The fix to this issue is to apply patch for the following unpublished bug.
Bug 13553428 - QA:BLK:DELIVER TO CORP. OID LDAP USERS FAILED WITH IMPERSONATOR DOES'NT EXIST.
Patch 13553428: QA:BLK:DELIVER TO CORP. OID LDAP USERS FAILED WITH IMPERSONATOR DOES'NT EXIST.
The patch is available on MOS and can be applied to all platforms.
Or access via this link:
https://updates.oracle.com/Orion/Services/download/p13553428_111160_Generic.zip?aru=14732325&patch_file=p13553428_111160_Generic.zip
Please refer to the Readme. It is important to Stop the System before applying the patch. Then restart.
During restart Weblogic should automatically detect that bimiddleware.ear has changed in the OH and automatically redeploy the application
If helps pls mark as correct
Edited by: Srini VEERAVALLI on Dec 12, 2012 7:39 PM

Similar Messages

Scheduling the report from Infoview portal does not show up data

"The crystal report is based on a SAP BI query. The parameters of the report are basically the parameters(SAP variables) of the SAP BI query. When we run the crystal report in the CR Report Designer tool, it runs fine showing all the data correctly. Then we published the crystal report to the Crystal Enterprise Server from the SAP BI system. Through the Infoview portal, the user clicks on the 'Schedule' link for the report and sets the parameters. When the 'Schedule' button is clicked, it runs successfully but no data is seen in the report except for the template. But under the same report, in Infoview portal, if the user selects "View" link, sets the parameters and then clicks the 'Execute' button, it runs successfully showing all correct data.
Dont understand why it works for 'View' link but doesn't work for 'Schedule' link. Is there any setting that needs to be made for this?"
Thanks in advance,
Sri

Hi Sri,
When we are able to see the report and unable to schedule the report with in the Info view, then check with the user rights.
Just try to login with admin account and try to schedule the report.
Also check the report in CMC and see the preview of the report.
If the user doesn't have enough rights to schedule the report, then it doesn't allow it.
Also check with in the Folder rights with in the report is saved.
Regards,
Naveen.

Change the Locale settings when scheduling the report with an Excel format?

Hi,
My reports have been scheduled with Excel format, however, when the report is viewed in Excel, the date fields are in the format "mm/dd/yyyy" i.e. English(United States) and they need to be in the format "dd/mm/yyyy" i.e. English (Ireland).
I am wondering if there is any way to change the Locale settings within Business Objects?
For the time being users have been advised to manually change the format within excel, however, this is not the preferred option.
Any ideas?

Hi,
Thanks for the reply.
The cell format is set as "Date dd/mm/yyyy" but it still runs as an Excel doc with the format mm/dd/yyyy.
When I schedule the report to run as a Web Intelligence document and then manually export it to Excel, the Date format is correct i.e. dd/mm/yyyy.
Any more ideas?
Regards.

Unable to open the Projects from Project center with the Alias name PWA 2010

Hi,
I am unable to open the Projects from Project center with the Alias name with the server name i am able to open the projects, version is project server 2010,
My system is ABC.DC.IN alias name i have given is DEF.AD.COM
With the system name i can able access PWA and all are working fine.
As i have observed with alias name i can able to login to pwa and all the server setting approval center all are working fine but only in the project center i am not able to open the projects (http://DEF.AD.COM/pwa/ProjectDrillDown.aspx .xxxx) its
is coming in the below of the ie.
But with Alias name these are the issues i am facing,
1.when longing with alias name its asking two times for user name and password
2.when i click on a project from project center its taking some time and asking for user name and password after i enter user name and password "PAGE cannot displayed" error i am getting.
3. I have observed one more thing if click on Project details then only this issue is coming project schedule and project information is also opening with Alias name.
can any one Help me.
Vijay kommireddi

Hi
Hope the below link will help you.
And also please check the browser which you are using as mostly IE 8.0 won't support, Please try it in IE 9.0 and Chrome.
http://social.technet.microsoft.com/Forums/sharepoint/en-US/c03300d2-2a27-4d5d-b3f6-a3660805e125/alternative-access-mapping-when-accessing-the-site-it-is-asking-for-username-and-password
Thanks
Geeth If you feel that the answer which i gave you is Helpful please select it as Answer/helpful.

Unable to print the report after SP2 (CR 2008 / VS 2008)?

I'm developing an ASP.NET application using VS 2008 (Framework 3.5). I have installed CR 2008 with SP (0, 1, and 2).
I created an invoice report and I printed it as test for the report and it works okay. I needed to change the page size of the report to a user defined size and reset all of the margins to zero.
After I did that I was unable to print the report again and every time I tried to print the report nothing gets printed.
I checked my environment to find the cause of this problem but I found nothing except that I'm using CR runtime for SP1 and I'm currently using SP2. So I did remove CR runtime for SP1 and install CR runtime for SP2.
The problem didn't go away and I faced one more problem.
Usually I'm using a dataset as a data source for my reports. After installing the CR runtime for SP2 I couldn't see any date column in my report data source (Dataset). All other types of columns appear except date fields! Why I have no Idea?
After I do some more testing regarding my issue I found out the following
1. When I add a new report to my web application and I don't change the page setting the report work fine.
2. When I change the page setup settings (Page Margins, horizontal width and vertical height) the report show up okay but never gets printed.
Why I don't know?
Addition to that the report dataset (Data Source) showing in the field explorer never shows any date type field?
All of the above issues happened with me after installing SP2.
OS: WindowsXP Pro SP3
CR 2008 (SP 0, 1, 2)
VS 2008 SP1
Please I need your help.
Edited by: Sami Aljafer on Oct 12, 2009 8:35 PM
Edited by: Sami Aljafer on Oct 12, 2009 8:38 PM

Hi, Sami;
Are you printing from the Crystal preview window, or in code?
If you are printing from the preview window, try printing via code, such as:
An example of print to printer:
crReportDocument = New ReportDocument
crReportDocument.Load("h:\labels2.rpt")
''Use error handling in case an error occurs
Try
''Set the printer name to print the report to. By default the sample
''report does not have a defult printer specified. This will tell the
''engine to use the specified printer to print the report. Print out
''a test page (from Printer properties) to get the correct value.
crReportDocument.PrintOptions.PrinterName = "
dwcb12003\ZDesigner ZM400 200 dpi (ZPL)"
''Start the printing process. Provide details of the print job
''using the arguments.
crReportDocument.PrintToPrinter(1, True, 1, 1)
Please post your question about the dataset as a new post.
Regards,
Jonathan
Edited by: Jonathan Parminter on Oct 12, 2009 2:28 PM

Unable to schedule a report to email and print

I have been working on a task to both print and email a report to recipients whose email addresses are obtained at runtime. So far I am able to email the report as a PDF attachment, however, I am not able to get the report to print. I have three thoughts as to why the report is not printing.
1. The printer is in a subdomain under the domain where InfoView and the Enterprise server reside.
2. It is not possible to schedule a report for both an SMTP and print destination simultaneously.
3. The format is causing an issue in printing - the SDK API states "Printer is a report format specific destination and can only be used when the report object is a Crystal Report."
I have looked at the scheduled report in InfoView and can see that the print settings I am passing are correctly set for the scheduled instance. Does anyone know if there is a problem with trying to schedule printing and email at the same time, or if the report format must be .rpt?
Below is my code. Thank you for your time.
String query = "Select SI_ID, SI_NAME, SI_PROCESSINFO, SI_SCHEDULEINFO, SI_SCHEDULE_STATUS From CI_INFOOBJECTS Where SI_ID=" + reportId;
 IInfoObjects results = null;
 ISchedulingInfo schedulingInfo = null;
 try {
 results = iStore.query(query);
 } catch( SDKException sdke ){
 logger.error(sdke);
 if( !results.isEmpty() ){
 // get the actual report object from collection and set scheduling information
 IInfoObject report = (IInfoObject)results.get(0);
 schedulingInfo = report.getSchedulingInfo();
 schedulingInfo.setType(CeScheduleType.ONCE);
 schedulingInfo.setRightNow(true);
 schedulingInfo.setRetriesAllowed(3);
 try {
 Set<String> keys = destinations.keySet();
 Iterator i = keys.iterator();
 while( i.hasNext() ){
 String dest = (String) i.next();
 if(dest.equals(CrystalDestinations.EMAIL)){
 // get the destination object and set it to SMTP plugin
 List emailAddress = destinations.get(CrystalDestinations.EMAIL);
 IDestination destinationObject = schedulingInfo.getDestination();
 destinationObject.setName("CrystalEnterprise.SMTP");
 IDestinationPlugin smtpPlugin = (IDestinationPlugin) iStore.query("SELECT * FROM CI_SYSTEMOBJECTS WHERE SI_PARENTID = 29 AND SI_NAME='CrystalEnterprise.SMTP'").get(0);
 ISMTPOptions smtpOptions = (ISMTPOptions) smtpPlugin.getScheduleOptions();
 smtpOptions.setDomainName( emailDomain );
 smtpOptions.setServerName( smtpHost );
 smtpOptions.setSMTPUserName( smtpUser );
 smtpOptions.setSMTPPassword( smtpPass );
 smtpOptions.setSubject( "Email for report " + report.getTitle() );
 smtpOptions.setMessage( "This is the message body" );
 smtpOptions.setSenderAddress( smtpUser + "@cdrh.fda.gov" );
 smtpOptions.setSMTPAuthenticationType( ISMTPOptions.CeSMTPAuthentication.LOGIN );
 for(int j = 0; j < emailAddress.size(); j++ ){
 smtpOptions.getToAddresses().add( emailAddress.get(j) );
 destinationObject.setFromPlugin( smtpPlugin );
} else if ( dest.equals(CrystalDestinations.PRINT) ){
 List printers = destinations.get( CrystalDestinations.PRINT );
 IReportPrinterOptions printerOptions = ((IReport)report).getReportPrinterOptions();
 printerOptions.setCopies(1);
 printerOptions.setEnabled(false);
 printerOptions.setPrinterName( (String)printers.get(0) );
 printerOptions.setPageLayout(IReportPrinterOptions.CeReportLayout.USE_SPECIFIED_PRINTER_SETTING);
 List reportPrompts = ((IReport)report).getReportParameters();
 for(int j = 0; j < reportPrompts.size(); j++){
 IReportParameter prompt = (IReportParameter) reportPrompts.get(j);
 if(prompt.getParameterName().equals(mdrParamName)){
 IReportParameterSingleValue v = prompt.getCurrentValues().addSingleValue();
 v.setValue(reportParameters.get(mdrParamName));
 } else if(prompt.getParameterName().equals(addressParamName)){
 IReportParameterSingleValue v = prompt.getCurrentValues().addSingleValue();
 v.setValue(reportParameters.get(addressParamName));
 IReportFormatOptions format = ( (IReport) report).getReportFormatOptions();
 format.setFormat(IReportFormatOptions.CeReportFormat.PDF);
 iStore.schedule( results );

Hi Jason,
Based on your code, I could not tell if you were scheduling a Crystal Report or a WebI document.
Regardless, what I would suggest is you try scheduling the report/document on InfoView.
Once you schedule it on InfoView, you can retrieve the instance on Query Builder (or through code) and compare the properties that are being set through InfoView and the one you set through your code.
This should indicate if you are missing some properies or have set some properties incorrectly.
Hope this helps.
Regards,
Dan

Open doc URL: unable to open the report in same window

Hi
I'm trying to open a report using open doc url with "swindow=same" but still it opens in a separate window. This happens only when I use JAVA viewer. it works fine in ActiveX and HTML but I want this in JAVA viewer as i'm including this page in my JAVA application and it should open the report in the same window. I tried using "<a>URL</a>" and also target="_self" by HTML interpretation for that object but still the same problem. I'm unable to open the report in the same window by using JAVA viewer for Crystal Reports in info view. Please help me!!!
Envirorment Details: Crystal Reports 2008 SP3, BOE XI R3 SP3
regards
Raghavendra.G

I have tested that myself and It seems that HTML interpretation does not work with the Java viewer.
I have also tried using a hyperlink containing javascript
eg.
javascript:window.location.href='http://www.sap.com'
but the java viewer seems always to launch a new window before processing the command.
I would recommend to open a case by SAP support ( httP://service.sap.com/support )
Regards,
Stratos

BI Publisher: Issue while scheduling the report/query to be executed daily

Hi,
We are using Oracle Business Intelligence 11.1.1.6.3 and while we schedule a report(RTF Template) we are facing issue.We use bursting query and when we select option to execute immediately it runs fine and sends notifications,it also executes when we schedule it to run Once but fails when i schedule the report to be executed DAILY .

hii
The query does not includes any RKF, CKF any complex calculations. as I said before also query is based on MP which is designed on a single Cube. There are no such navigational Attributes used for selection, Number of records are not more than 300 on that particular selection parameter
there is only one info object which is creating issue & it is a master info object. If i am restricting this info object in the query & then executes the query , it gives the error msg also i put a variable for input parameter, & there I restrict the value, then also query executes with an error msg
But if query is not restricted with any value for that info object then query executes with in a second.
Thanks
neha

Unable to find the report in the manifest resources

Hi!I have problem using Crystal Report documents created in Visual Studio 2005 using the build-in version of Crystal Reports. If I create a project from scratch with one report and then some code to initialize and export the report to disk I get the following error message:"Unhandled Exception: CrystalDecisions.CrystalReports.Engine.LoadSaveReportException: Unable to find the report in the manifest resources. Please build the project, and try again."I have tried using both the "Embedded resource" and the "Content" options during build, but with no luck at all. When using the Content option I explicitly load the rpt-file but no luck at all. Do anyone have a clue to what the problem is? I have absolutely no idea. The things worked in Visual Studio 2003 but not in 2005. What is the manifest resource?Would really appreciate some help, thanks in advance!My source code is below.Best regards Larsclass Program { public static TableLogOnInfo CreateConnectionInfo(string userID, string password, string serverName, string databaseName) { TableLogOnInfo conInfo = new TableLogOnInfo(); conInfo.ConnectionInfo.UserID = userID; conInfo.ConnectionInfo.Password = password; conInfo.ConnectionInfo.ServerName = serverName; conInfo.ConnectionInfo.DatabaseName = databaseName; return conInfo; } public static ReportClass CreatePersonalWillReport(TableLogOnInfo conInfo, string personID) { ReportClass doc = new ReportClass(); doc.Load(@"C:\Utveckling\reports\main\ClassLibrary1\bin\Debug\CrystalReport1.rpt"); List<ReportParameter> parameters = new List<ReportParameter>(); parameters.Add(new ReportParameter("@personID", personID)); return ApplyReportParameters(doc, parameters, conInfo); }   public static void ExportReportToDisk(string fileName, ReportClass report, ExportFormatType formatType) { report.ExportToDisk(formatType, fileName); } protected static ReportClass ApplyReportParameters(ReportClass report, List<ReportParameter> paramList, TableLogOnInfo conInfo) { foreach (Table t in report.Database.Tables) { t.ApplyLogOnInfo(conInfo); } foreach (Section s in report.ReportDefinition.Sections) { foreach (ReportObject ro in s.ReportObjects) { if (ro.Kind == CrystalDecisions.Shared.ReportObjectKind.SubreportObject) { SubreportObject sro = (SubreportObject)ro; ReportDocument doc = sro.OpenSubreport(sro.SubreportName); foreach (Table t in doc.Database.Tables) { t.ApplyLogOnInfo(conInfo); } } } } foreach (ParameterFieldDefinition paramField in report.DataDefinition.ParameterFields) { foreach (ReportParameter rp in paramList) { if (paramField.Name == rp.Name) { ParameterValues pv = paramField.CurrentValues; string s = (string)rp.Value.Value; ParameterDiscreteValue pdv = new ParameterDiscreteValue(); pdv.Value = s; pv.Add(pdv); paramField.ApplyCurrentValues(pv); } } } return report; }  static void Main(string[] args) { TableLogOnInfo conInfo = CreateConnectionInfo("username", "password", "server", "database"); ReportClass report = CreatePersonalWillReport(conInfo, "-1291000956"); ExportReportToDisk("C:\temp\report.pdf", report, ExportFormatType.PortableDocFormat); }/// <summary>/// Helper class that contains parameter key/value pairs./// </summary>protected class ReportParameter {/// <summary>/// The parameter name./// </summary>private string name = null;/// <summary>/// The parameter value./// </summary>private ParameterDiscreteValue value = new ParameterDiscreteValue();/// <summary>/// The parameter name./// </summary>public string Name {get {return this.name;}set {this.name = value;}}/// <summary>/// The parameter value./// </summary>public ParameterDiscreteValue Value {get {return this.value;}set {this.value = value;}}/// <summary>/// The constructor./// </summary>/// <param name="name">the parameter name</param>/// <param name="value">the parameter value</param>public ReportParameter(string name, object value) {this.name = name;this.value.Value = value;}}

Lars,
Â Have you read the CRnet_deployment.doc if not it may help fix your problem (It didnt mine but hey you may be lucky) See http://support.businessobjects.com/communitycs/technicalpapers/crnet_deployment.pdf
I have a similar issue but in 2003.net using the bundled CR package. I'm trying to use CR in a Web Service called from a Compact Framework device. I've confirmed I'm using the correct Merge Modules & my Build Actions are all set as stated in the CR Application Deployment document but it still spits out Unable to find the report in the manifest resources
I've looked extensively on the net and while others have had this problem the only advice I've seen revolves around embedded build actions and using the correct merge modules. There must be something else causing this problem and some one who has found a way round it?!?
If your that someone please take 5 minutes out and help a couple of guys in distress?
Thanks in advance,
Ian

How to add a link like "Export" to schedule the report in dashboard

when i add a report into dashboard, i can "analyze","edit" or "export" it using report links.
but now if i browse my dashboard, i find a report which i am interested in, and i want to schedule it directly in dashboard.
i suppose it will be a botton or a link like "analyze" or "export".
but i can not get the report's path directly, wich i want to use it in the catalogobject parameter of writeibot() web service.
can anyone help me?
Thanks,
newkoa
Edited by: user7719731 on 2013-4-15 下午5:49

yes, i need the report path when i open the dashboard.
it's better to display the report path with the report.
so i can format catalogobject parameter ,
and then use writeibot() web service to schedule the report manually.
thanks

Problem in Scheduling the report in Bex Broadcaster

Hello friends,
I am trying to Schedule a report to be broadcasted daily to users through mail. When I directly execute the setting, the mail delivers fine but when I try to schedule the report by direct scheduling at some time point it doesnt work and mail is not broadcasted. Can some tell me where I am missing or is there any other setting required .
kindly suggest what to do ?
thanks

Hi,
Check the scheduling date and time , by default the scheduling date will be the next day in the broadcaster settings..
Regards,
Siva.

CRVS2010 Beta - Unable to find the report in the manifest resources

I upgraded to VS2010 Beta where we soon encountered this error.
Unable to find the report in the manifest resources. Please build the project, and try again.
at CrystalDecisions.CrystalReports.Engine.EngineExceptionUtils.DoThrowException(String message, EngineExceptionErrorID id)
   at CrystalDecisions.CrystalReports.Engine.ExceptionThrower.ThrowEngineException(String messageID, EngineExceptionErrorID id)
   at CrystalDecisions.CrystalReports.Engine.ReportClass.Load(String reportName, OpenReportMethod openMethod, Int16 parentJob)
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.EnsureLoadReport()
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.SetDataSourceInternal(Object val, Type type)
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.SetDataSource(IEnumerable enumerable)
Searching the forums I saw some similar issues. Here is how the issue was solved on my end.
Looking at the properties of the crystal report file in VS2010 the Build Action was "None". After setting it compile things worked as normal. The exception made sense after finding the cause.
I'm not sure if this was caused by VS2010 as my organization was in the middle of migrating to TFS 2010 that may have caused an issue.
Hope this helps someone.

Cliff, thank you very much for sharing this soution with the community. Once CRVS2010 RTMs, I'll create a KBase on it.
Happy coding,
Ludek

I am not Getting emails when i schedule the Report.

Hi All,
When i Schedule the Report in obiee 11g i am Getting Alerts Successfully but am not getting Mail.
When i Schedule the Publisher i am getting mails.
ERROR Details:
Eventually succeeded, but encountered and resolved errors...
Number of skipped recipients: 2 of 3
AgentID: /users/administrator/Agents/latest test
[nQSError: 75005] Failed to send AUTH command. SMTP server does not support any authentication mechanisms. Remove email credentials, or use a server which supports authentication. AgentID: /users/administrator/Agents/latest test
...Trying SMTP Delivery loop again... Sleeping for 3 seconds. AgentID: /users/administrator/Agents/latest test
[nQSError: 75005] Failed to send AUTH command. SMTP server does not support any authentication mechanisms. Remove email credentials, or use a server which supports authentication. AgentID: /users/administrator/Agents/latest test
...Trying SMTP Delivery loop again... Sleeping for 5 seconds. AgentID: /users/administrator/Agents/latest test
[nQSError: 75005] Failed to send AUTH command. SMTP server does not support any authentication mechanisms. Remove email credentials, or use a server which supports authentication. AgentID: /users/administrator/Agents/latest test
...Trying SMTP Delivery loop again... Sleeping for 8 seconds. AgentID: /users/administrator/Agents/latest test
[nQSError: 75005] Failed to send AUTH command. SMTP server does not support any authentication mechanisms. Remove email credentials, or use a server which supports authentication. AgentID: /users/administrator/Agents/latest test
Exceeded number of SMTP delivery retries.
Thanks and Regards
Kiran Kumar

Hi All,
I got the answer and it worked for me:-
1. If the BI Scheduler cannot ping the mail server specified in the scheduler configuration, check the correct server is specified. If it is, check that it is up and running.
2. If the user name and password are specified in the scheduler configuration, log in to Enterprise Manager and navigate to:
Weblogic Domain
Right click on bifoundation_domain > Security > Credentials
Expand oracle.bi.enterprise
Highlight mail.server and delete the user name and password..
Thanks & regards
Nitin Aggarwal

Is there a way to schedule the reports in the backend

Hello Gurus,
Is there a way to schedule the reports in the backend in the absence of users and post it to a particular folder in BW 3.1 version.
Thanks
Simmi

Hi,
Reporting agent can be used to schedule the reports in the background.......
GOOD DOCUMENTATION FOR REPORT AGENT
http://help.sap.com/saphelp_nw04/helpdata/en/28/734d3caa70ea6fe10000000a114084/content.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/2.0/2.0b%20reporting%20agent%20incl.%20precalculating%20web%20templates.pdf
http://help.sap.com/saphelp_bw30b/helpdata/en/ad/6b023b6069d22ee10000000a11402f/frameset.htm
please find the link gives all ppt's related to bw.
https://websmp201.sapag.de/~form/sapnet_FRAME=CONTAINER&_OBJECT=011000358700003892932001E&
http://help.sap.com/saphelp_erp2004/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
Hope u will find good stuff here
Happy Life,
Aravind

Sending of message failed. Unable to open the temporary file C:\Users\Admin\AppData\Local\Temp\nsemail.eml. Check your 'Temporary Directory' setting.

after opening an email I knew to be a phishing attempt, I forwarded it to my bank's spam/phishing email address. I did NOT click any link in the suspicious email. only forwarded it.
now when I try to send an email I get the following error message:
Sending of message failed.
Unable to open the temporary file C:\Users\Admin\AppData\Local\Temp\nsemail.eml. Check your 'Temporary Directory' setting.
I can't find a temp directory. where is this and how do I fix it?

Try to start *Windows* in safe mode with networking enabled.
- Win8 http://windows.microsoft.com/en-US/windows-8/windows-startup-settings-including-safe-mode
- Win7 http://windows.microsoft.com/en-US/windows7/Start-your-computer-in-safe-mode
- XP http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx
Still in Windows safe mode, start Thunderbird in safe mode.
- https://support.mozilla.org/en-US/kb/safe-mode
Does the problem go away?

Unable to Schedule the Report with a user with Author Role.

Similar Messages

Maybe you are looking for