Unable to search documents

hi all
i've created index and its status is running.
but when i perform search operation it is not displating results.in application log the following message is displayed.
<b>Error 11/30/05 12:33:03 AM XCrawlerService Failed to create crawler task ind_000 Knowledge Repository - com.sapportals.wcm.service.xcrawler.XCrawlerException: The SQL statement "SELECT "XCRW_TASK_INDEX" FROM "KMC_XCRW_TASKS" WHERE "XCRW_TASK_ID" = ?" contains the semantics error[s]: type check err </b>

I just noticed the other thread where you're posting the same problem; as Dirk mentioned it should be fixed with SR1 aka SP9 patch3. It should be available from http://service.sap.com; look for sw download, entry by application, netweaver, netweaver04, and so on.

Similar Messages

After creating a searchable database I am unable to search documents based off of the bates number.

I just finished creating a searchable database in Adobe Acrobat Pro and it finds documents based off of search terms fine. It does not however locate documents based off of the Bates number that I am using as a search term. Why won't it let me do this?

Hi Dodu.NET,
Please refer the Kb Doc : http://helpx.adobe.com/creative-suite/kb/error-exit-6-exit-7.html.
Please see Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html for information on how to review your installation logs
In addition you cna try these steps :
> Enable the hidden Admin Account on Windows 7 ( Ref : http://www.howtogeek.com/howto/windows-vista/enable-the-hidden-administrator-account-on-wi ndows-vista/ )
> Disable all Non-Microsoft Startup Services. (Ref : http://helpx.adobe.com/x-productkb/global/disable-startup-items-services-windows.html )
> Disable all the Antivirus softwares like CA, Norton,Mc Afee etc. temporarily from the computer.
Reboot and try installing in the new enabled Admin user account and check.

Unable to search documents after creating Index

hi all,
i've created index and assigned datasources to that index.but when i try to search that documents it is showing tht "No matches have been found "
where as in applicaiton log it is displauing follwing message
Error 11/29/05 6:30:03 PM XCrawlerService Failed to create crawler task SubscriptionCrawler - com.sapportals.wcm.service.xcrawler.XCrawlerException: The SQL statement "SELECT "XCRW_TASK_INDEX" FROM "KMC_XCRW_TASKS" WHERE "XCRW_TASK_ID" = ?" contains the semantics error[s]: type check error: the e
so, can any body help me to solve above problem
regards
gnana

Hi Gnana,
You may try searching on http://service.sap.com/patches
You will have to search for ur requrired patches. You would also find pdfs, giving details on the same.
All the best.
Awaiting Reply.
Warm Regards,
Ritu R Hunjan
Message was edited by: Ritu Hunjan

Unable to search document (CV04N) using Objectlink of Material BOM

Dear All,
I am using SAP ECC 6.0 EHP4.
When I execute tcode CV04N and go to object link tab and select object link tab of "Material BOM" it gives "Runtime Errors DYNPRO_NOT_FOUND"
Error Details:
Short text
Dynpro does not exist
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLCV100" had to be termin
come across a statement that unfortunately cannot be
Error analysis
The system attempted to use dynpro 1257 in program "S
This dynpro does not exist.
Trigger Location of Runtime Error
Program SAPLCV100
Include LCV100O01
Row 491
Module type (MODULE PBO)
Module Name INIT_404
I coud not find any help in OSS. Have someone of you an idea?
Thanks
Arnfried

Hello Christoph,
thanks for the link.
I have checked the settings in transaction SPRO and DC10. All seems to be correct.
The dynpro 1257 exists in function group CV130 and in DC10 the dynpro no 257 is maintained.
I have found the OSS Note 484836 - CV04N object link screen 1254 does not exist. The note describes a similar problem.
It would seem that dynpro 1257 must also exists in function group CV100. I thing its not enough to copy the dynpro 1257 from function group CV130 to CV100.
To avoid the error can we simply delete the corresponding settings in DC10 for dynpro 257? Or has deletion of the entry any side effects in other modules/programs?
Thanks
Arnfried

Unable to search for words in a pdf document

I am using Adobe Reader Ver 10.1.1 (All updates)
I have a pdf document in which I am unable to search for words. No words in the document are found even though they do exist. If I copy a word from within the document and paste it into the search criteria then instead of getting the word that I copied, I get substitute characters and it can in fact find these characters as the word being searched.
The document is a catalog and can be downloaded from the following URL.
http://www.carbatec.com.au/getcatalogue?zenid=d1cuvbat0ois0g37r0r33vnah1
I will appreciate any help as to why I cannot search for words in the document.

Thank you Dave Merchant and try67 for your responses. As per my previous post, I contacted the company re the catalogue and they have responded favourably. I'll include their response because it gives the reason for the search failure as document compression which you might find interesting. I'll await their new catalogue and see if they have fixed the problem.
Company response:
Thank you very much for your input. And yes, you are correct, the compression we used for the current catalogue's PDF format does strip out text included in the catalogue. We used the compression settings we did with the intention of minimising download time, however I take your point about including text for search purposes (which I also utilise when I'm scanning through PDFs).
We will actually be posting out our new catalogue next week and we'll release the new PDF version on the website at the same time. I've asked our graphic designer to ensure that the PDF we use for the new catalogue includes searchable text.

Unable to open document. Please check to see if you have read permission for the above file.

System:
Adobe Acrobat X Pro, 10.1.2
Windows 7 Enterprise, 32-bit
Quad Core badass CPU
4GB RAM
MS Word 2010 (Office 2010)
I installed the latest version as Administrator and am running as Administrator. I have all rights to all files on the PC.
When I attempt to create a PDF from any Word document, whether .DOC or .DOCX, I get an error window every time:
"Unable to open document:"
"[document location]"
"Please check to see if you have read permission for the above file."
This happens after the little notice pops up "Starting the application which created the document...."
If I open Word and create PDF from the ribbon, it works. It still won't allow me to create from Acrobat.
It creates PDFs from Excel files but not DOC files. I've searched for solutions but found none. I did find this from July of 2011:
"I have found out from Adobe technical support that this is a known issue with Office 2010 SP1 installed. This is an FYI for anyone else experiencing this issue, remove SP1 and it will work ok. They said an update to correct this issue will be coming within the next quarter."
I have updated to the latest version 10.1.2 and still have this problem.
This is a major issue, because it also fails on batch conversions, which is what I really need for the 100 or so documents that need to be PDFed. I'm not going to open each individual file and save each one from within Word.
This is a KNOWN ISSUE at Adobe, and if you look through the forums you'll find many people having this problem, and so far, I have not seen any solution.
If anyone has found the solution, please post it here.
Thanks!
B

I think I found a solution. It seems to be relatet to normal.dotm.
In our environment we have upgraded from XP & Office 2003 to Win7 and Office 2010. Normal.dot is stored on the users home share. When Office 2010 is started for the first time (for a user) it takes some of the old stuff from normal.dot and puts it in the new normal.dotm. When this happens, we get this error in Acrobat X.
The solution is to rename both normal.dot and notmal.dot to e.g. normal.dot.old and normal.dotm.old. Office/Word 2010 will then create a new, "clean" normal.dotm.
(By the way, if you are in a corporate environment, you might have changed the default path to normal.dot in Office group policies. You can see it here: HKEY_CURRENT_USER\Software\Policies\Microsoft\office\14.0\common\general\usertemplates)
I would be interested in knowing exactly why/what in normal.dotm caused this error. I can provide you (Adobe) with a faulty normal.dot(m), if you're interested.

Why is Preview unable to search some pdfs that Adobe Reader has no problem searching?

In the last couple months, I've noticed that Preview is unable to search some (but not all) pdfs. These are clearly digitized journal articles, recently published. Since this didn't make sense to me, I opened the documents with Adobe Reader and found they were searchable using Adobe.
What is going on? I'd prefer to use Preview, since I'd always preferred its search function and like its annotation tools (specifically, the box outline tool I use to identify chunks of text). Should I just give up on Preview and switch to Adobe?

I can search that document in both Safari and Preview.
Back up all data.
In the Finder, select Go ▹ Go to Folder from the menu bar, or press the key combination shift-command-G. Copy the line of text below into the box that opens, and press return:
/Library/Internet Plug-ins
From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
If you still have the issue, repeat with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

Unable to search for first record using the Preview tree

Post Author: TheBig1980s
CA Forum: General
Hello:
Users are unable to search for the first record in the Preview tab's tree. The reason for this is because the first record is within the first page header of the report. My guess is that, by design, Crystal takes the end user to whatever the first instance of the record iseven if that first record is in a page header. That's not "good". I want the user to be taken to the first record within the details of the reportnot within the page header.
I have suppressed the page header to not print on the first record by using OnFirstRecord. But, I still get the same issue where end users cannot select the first record in the tree without being taken to the page header. Very strange.
Can anybody think of any other ideas?
Thanks!
TheBig1980s

Thank you Dave Merchant and try67 for your responses. As per my previous post, I contacted the company re the catalogue and they have responded favourably. I'll include their response because it gives the reason for the search failure as document compression which you might find interesting. I'll await their new catalogue and see if they have fixed the problem.
Company response:
Thank you very much for your input. And yes, you are correct, the compression we used for the current catalogue's PDF format does strip out text included in the catalogue. We used the compression settings we did with the intention of minimising download time, however I take your point about including text for search purposes (which I also utilise when I'm scanning through PDFs).
We will actually be posting out our new catalogue next week and we'll release the new PDF version on the website at the same time. I've asked our graphic designer to ensure that the PDF we use for the new catalogue includes searchable text.

Acrobat 8 Unable to Search for words after convertion from mircrosoft word

Hi all,
I got a problem with a user using Adobe Acrobat 8 search function. he converted his Microsoft Word document to PDF file. But he is unable to search/find most of the words after convention, even thou the word is right there it will just say it cannot find any matches.
His colleague have acrobat 7 and it has no such problem at all.
Erm is there any setting to for me to change or is there a need to update any patches? One more thing the Word document is make up of textboxs so is this the cause?
I would like some Expert here to give some advise/help here as i cannot downgrade to acrobat 7.
Thanks in advance.

Sorry, I make a mistake. He only can select some of the text document and only those can be searched. What is the cause and any setting to change?
For your Information
1 Our office is using Office 2000
2 Tried Using create Pdf -->Select the file, but the result is still the same. However
3 i tired to use Adobe PDF(printer) I am able to seach everything.
I haven tell the user the workround for no3, but i dun think he wants it and some need to adjust the margins.
Hope the information given to you will help you solve my problem.
Thanks in advance

Interface builder is unable to open documents of type iPad XIB

Hi,
I got a application from my teammate, and it is for both iphone and ipad devices (which it is developed under iPhone SDK 3.2).
I have iPhone SDK 3.1.3 installed in my mac book. When i tried to compile the application for iphone simulator i got the following error.
Interface builder is unable to open documents of type iPad XIB.
The above error is for interface builder created for ipad.
My Question is we can't compile the application on iPhone SDK 3.1.3 which the application developed under iPhone SDK 3.2?
Please shed some light of this?
thanks
mindus

Go to your project settings, and delete the line that says Interface Builder Plugin search path or something similar.
the exact line in project.pbxproj is: IBC_PLUGIN_SEARCH_PATHS = "${PROJECT_DIR}/**";

The wizard was unable to scan documents...

Hi
I'm running FM 7 and WWPSE 7 under Windows 2000. Hardware is an IBM Thinkpad with 1 GB of RAM. Have just installed Quadralay's WebWorks Publisher 7. Whenever I try to convert an FM file I am confronted with the message "The Wizard was unable to scan documents in [project]".
A google search unearthed a document with ID 328048 in the TechNote database which pertains to this problem. Solution 2 suggested there refers to a KB document "How to establish Communication between WebWorks Publisher and FrameMaker 7" which is thought to be in the Knowledge Base of the Quadralay web site (www.webworks.com/support/).
However, I was unable to find such a document - neither in Quadralay's nor in Adobe's KBs.
Being totally stuck I wonder if someone out there can help me out.
Thanx in advance
Rolf Laeuffer, Switzerland

Rolf:
Where did you get the WebWorks (as distinguished from the newer ePublisher Pro) installation program?
As a former and generally less than impressed customer of Quadralay, I recall that the installation program shipped on the CD-ROM for one of the last releases of the older WebWorks Pro was defective the day it was delivered.
The solution was to go to the Quadralay Web site, complete a cumbersome registration process so as to acquire access to the support portion of the site, and download an updated installation program.
At this point, however, I don't believe that Quadralay will today retroactively support any versions of WebWorks Pro. That in turn may mean that you might not be able to acquire the updated installation program.
As Art suggested, I would recommend contacting Quadralay. Good luck -- they're not as far as I know anyone's favorite vendor...
Cheers & hope this helps,
Riley

User using outlook 2010 unable to search older items lets say a year old.

User is unable to search an emails a year old in outlook. OWA is working fine able to search and find all the emails .
Tried rebuilding the outlook profile and indexing but still unable to find any pointers.
Thanks

Already tried rebuilding index and profile... Do you think the below will work any idea ? i checked the below entry is not listed under below location so if i will create that and set it to 0 will that work ?
1)       Press the Windows Key + R on your keyboard, and type “REGEDIT”. This will open the Windows Registry Editor.
2)       Browse to the following: "HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\Windows Search"
3)       You will manually have to reset the value of “Prevent Indexing Outlook” to “0” (without the quotes). To do this, right click on the “Prevent Indexing Outlook” key,
select “Modify…”, then change the value data to “0”.
4) Close the registry editor.

Unable to edit document using "Edit with Word" option

Hi All,
i am having an issue with Office web apps. i am using SharePoint 2013 and Office web apps 2013. all the configurations have been done successfully. but i have a different kind of issue.
i am able to open documents in browser
i am able to edit document using " edit with word/excel web" option
but i am unable to edit document using "edit with word/excel" option
i have Office 2010 installed on my local machine.
do we need to have MS office of 2013 version? or is there anything missing from configuration part.
Please help me.
Thank You,
Bhaskar.

Hi,
According to your post, my understanding is that you could not use the "edit with word/excel" option.
I had tested the issue with the Office 2010, the option worked well.
You don’t need to install the Office 2013 to use this option.
What did you mean “but i am unable to edit document using "edit with word/excel" option
Did you mean the option gray out? Did the issue occur in other browsers?
You can use compatibility mode to check whether it works.
Open IE->Tools->Compatibility View Settings
You can also add the site into Trusted sites.
Open the IE->Internet Options->Security->Sites->add the site into the Websites, then check whether it works.
What's more, you can also use other browsers to check whether it works, such as Firefox, Chrome.
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Unable to open documents because of missing plug ins

I am unable to open documents in CS3 (version 5.04)
I am getting a message:"Missing Plug Ins: Conditional Text.InDesignPlugIn, WorldReady.InDesignPlugin.
The document "xxxxx.indd" uses one or more plug-ins which are not currently available on your system. Do you want to open anyway?"
If I click on OK I get another window, stating "Cannot Open File", a list of all kind of missing Plugins and the message "Cannot open "xxxxx.indd". Please upgrade your plug-ins to their latest versions, or upgrade to the latest version of Adobe InDesign.
I don't want to switch to CS4 and as far as I know version 5.04 of CS3 is the latest.
Any ideas of what I could do to get the latest PlugINs or anything else that would help?
Thank you!
Anne

Probably, but it's 100% not necessary when going from CS4 to CS3. It might be a case of 'half read, then half-understood'.
As this is a really frequent question and there are still no sticky posts: anyone up for a "feature request" that makes InDesign check the version number before opening? (Of course that wouldn't work backwards to CS3. Still, it'd avoid these kind of posts when CS6 comes out. Note: not CS5, because that would have no problems opening CS4, but CS4 would have problems with Cs5! Oh, for planning ahead ... )

Unable to search icloud inbox in Outlook 2013, Windows 8.1

HI,
I hope someone can help, I've been struggling with this for a few weeks.
I largely use my iPad and iPhone for email but have recently been more reliant on my Windows laptop as I have need to create items in office and it's simply easier on the large screen.
Outlook and iCloud integration has however been a constant source of frustration. I have almost got it, including the work around to subscribe to the sent items folder and create a rule.
The one thing now causing me frustration is that I am unable to search the iCloud inbox. When I type a search string it simply sits in 'searching' even though the message is there. This is strange as I can search all other iCloud folders and even right clicking on a message and selecting find messages in conversation works.
I have tries rebuilding the index.
As a side note, as it might be related, every time I open Outlook I receive the message 'For best performance, iCloud should not be set as the default data file. You can change this setting in Windows Control Panel under Mail, Data Files.' As I'm not sure what this means I've not done this.
I'm sure I can't be the only person with this frustration and I really hope someone has a neat solution.
Thanks for reading and hope to get a response soon.

I have had the same problem.
I have deleted the icloud account in Outlook and reinstalled it again by "icloud system control".
Now I am able to access my icloud calender, etc. again.
Hope this helps, best, Peter.

Unable to search documents

Similar Messages

Maybe you are looking for