Unable to see a font in Adobe Type Kit from within Adobe Muse

While I am able to install a font, Fertigo Pro from Adobe Type Kit, am unable to see the same font in Adobe Type Kit from within Adobe Muse.

Unfortunately, that is not the case. From http://help.typekit.com/customer/portal/articles/1189216-introduction-to-desktop-fonts-fro m-typekit: You are now able to sync fonts from Typekit to your desktop via Adobe Creative Cloud and use them in all your applications for web mockups, print design, word processing, and more.
Using of a font for web mockups is not the same as using it as a web font on a live website. The two uses are covered by different font licenses.
You can use a desktop synced font in Muse as a system font and export it as an image. But to use a Typekit web font in Muse is not currently supported (though you can try the Muse Insider workflow referred to in the other forum post I mentioned above).
Hope this clarifies things a bit.
Abhishek

Similar Messages

Manage multiple Adobe Type Kit sets

Is there a way to manage or see my teams Adobe Type Kit sets from the plan administrator's console? If not do you have a method or recommendation for monitoring or consolidating the Adobe Type Kit sets across multiple users?

Hello,
Thanks for your interest in Typekit! Typekit accounts accounts are each intended to be used by a single individual; it is not possible to combine them into one subscription.
Each user will manage his or her Typekit settings from the Account Settings page on typekit.com. If you need details on a particular kit (set of web fonts), the user who owns the account will be able to retrieve that information for the Kit Editor.
I hope that this helps; let me know if you have any other questions or if I misunderstood what you would like to do! Best,
-- liz

Cant uninstall adobe type manager from my computer

My computer wont go on stanby because its missing the device driver for the 101/102 key. It says that i need to remove the adobe type manager 4.0 because it doesnt work on windows xp with service pack 2 and that will help but when i try to remove it in the remove hardware app it comes back with a pc cleaner installation program

Sorry, I do not understand half of what you are trying to do, especially the last part.
My suggestion: install SP3 on Windows XP.

Emailing from within Adobe Reader XI to Outlook 2010 32-bit bounces

I have a wierd one going. The problem appears to be with Adobe Reader XI. If I email from withing Adobe Reader up pops Outlook 2010 and away we go but the email bounces. It says the destination address does not exist. If I open Outlook and browse for the attachment and send it without touching Acrobat Reader it works just fine.
The problem sure appears to be sending from Acrobat Reader. Any clues?

I am going to have to ding Adobe. The problem does appear to be on their end. Adobe is detecting the default storage and then using the account associated with that storage.
That is totally incorrect and a very sloppy, inaccurate job on Adobe's part. They need to detect and use the default account. Nicely done Adobe!

Illustrator CC2014 Unable to see downloaded font in the Character List

I just downloaded both BabelStone Han and BabelStone Han PUA and installed them in the Font Book on my Mac. I can see both of them in the Font Book.
For some reason, I can only open BabelStone Han PUA in Adobe Illustrator (Creative
Cloud 2014), but not BabelStone Han. Both fonts can be opened in Microsoft
Word, but when I copied and pasted into an Illustrator file, it
automatically converted into "小塚ゴシック Pr6N" and there’s no way that I can
revert info BabelStone Han.
Does anyone have an insight on how to resolve it?
Many thanks!

jadel,
Illy is particularly particular about the quality of fonts, so even if a font may be used in other applications, she may refuse to acknowledge it as a font.
Illy is particularly particular about the quality of fonts, because she can work with them at a deeper/higher level than most, so you can easily have a font that works in all other applications, but Illy refuses to recognize it as a font.
Some failing fonts discussed in earlier threads have turned out to have rather basic flaws, such as redundant, superfluous, or (if I remember rightly) even stray points, or other clear errors in the paths that they consist of.
You may need to look for similar fonts that Illy is willing to work with.

Why do I see incorrect fonts when I create PDFs from Word

When I first started using Acrobat (versions 3 through 5), it was an incredible product because it could create an exact copy of a document I created with a DTP program. I could send that PDF to someone who did not have the DTP program, yet the recipient saw exactly what I created in the DTP program. That's what made Acrobat great. It worked flawlessly.
Now I have Acrobat Pro XI, and I can't create a PDF from Word and get the correct fonts. I've seen quite a few messages on this forum and elsewhere indicating that other people have this problem, too. But I haven't found a solution. I've tried many things that are suggested--embed fonts, don't embed fonts, and different settings. Nothing seems to work. I've spent hours on this insted of doing the job I am paid for (writing). So I'd be very glad if anyone knows how to fix this.
A few specifics:
- Using Word 2010 and Acrobat XI Pro 11.0.3. Windows 64 bit.
- Most fonts are OK, but some appear to be substitutes. For example, some headings that are supposed to be Tahoma bold-italic come out as something different. It's a lighter weight font. I don't know what it is.
- Creation method from Word: Acrobat Tab, Create PDF or File > Save As PDF. Either way I get the wrong fonts.
- Print to Adobe PDF printer DOES produce the correct fonts, but this doesn't help because you don't get bookmarks (which are a critical part of our final PDF product).
- At one point it seemed that a Word setting, File > Options > Save > Preseve fidelty when sharing this document, but it didn't always work.
- I've seen this same problem on four computers, all using Word 2010 and Acrobat Pro XI.
Some messages suggest that rolling back to Acrobat 8 will solve this problem. It's hard to believe that's the only solution.

I was starting to think this might be an issue with font fauxing (I think that's the tech term). You've confirmed it.
Here's what can happen.
Font designers design a font, and (if they have the enthusiasm) bold and italic and bold-italic versions of the font. If you compare carefully, you will see that they are often quite different designs (look at lower case "a" for example, you'll often see that different in italic). Anyway, in an ideal world the font designer has provided four font files. Choose the bold/italic buttons in Word and it (well, actually Windows) picks the right font file.
But Word never forbids you from choosing those buttons even if the font files aren't there. (As an aside, pro design tools like InDesign WILL stop you choosing a style for which there is no font file, because what happens next in Word is considered evil).
If you ask Windows (or Mac OS) to show you a font in italic and there is no italic font file, it will take the regular file and slant each character. This may look different from the italic design font, it may also have different spacing. But to the casual word processor user, all is fine. (The pro designer says "oh my, look at that"). No bold? The font letters get thickened up somehow, often with ugly results, but the casual user is happy, because it's clearly the same font and clearly bolder. These processes are called "fauxing" (from making a faux or fake font).
But what happens in a PDF? PDFs will not faux fonts, and they don't have to. If you make a PDF it's like printing. To print a faux italic font, a slanted font prints. Generally looks no worse than the screen font. To print a faux bold font there are several different techniques, all ugly. One is to print several copies of each letter, slightly set off from each other but overlayed. This isn't only ugly, copy/paste often yields something like BBBOOOLLLDD TTTEEEXXXTTT. Often the printed bold faux font doesn't look much like the screen bold faux font. And here we have your situation exactly.
Now, I see only Tahoma and Tahoma-Bold on my computer too. You could see if anyone seels an Italic/BoldItalic version, or if they are bundled with some Microsoft software (which you'd need to own, the fonts can't be freely copied). But really this is sending the message - use a different font. I'd use Arial, where Windows has had all four files included since Windows 3.1 was released.

Unable to see file system on touchpad over USB from Windows 7

When I plug in my HP touchpad running 3.0.4 via USB to my PC running Windows 7 the device appears in device manager, but I don't see a new drive appear with a given drive letter under my computer.
If I look at device manager in windows, I see two webos devices. One is under disks. The other is an unknown device with a question mark next to it.
If I look at the disk from the disk management interface, the disk appears, but doesn't seem to have a drive letter nor a filesystem on it.
If I plug the touchpad into an XP box, it wants to format the drive... which loses my apps.
What did I break? Any way of fixing this?
Thanks!
-- gyre ---
Post relates to: HP TouchPad (WiFi)

Before you disconnect the cord from the PC, are you correctly choosing "Eject", or the incorrect "Safely Remove Hardware" from the tool tray?
I've heard the latter can cause confusion on a PC...
Wyrenut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Am unable to see all COLUMNS of my_ALV in SPOOL from a BACK GROUND JOB, Why

hi experts,
pls. clarify m ysimple doubt that,
Am running a ALV report in my_BACK GROUND..........this ALV contains 16 comuns...........I ´got the SPOOL from the scheduled my_BACK GROUND.......I noticed that, ONLY 9 columns are showing up?????????????
so,
1 - If I take print, all the columns will come show up?
2 - If I/user waanna to see totla columns, than How to get it done?
3 - Why SAP is so?
thanq

Hi Srini,
I do faced the same problem and struggle a lot. I have done two things and My problem is resolve .
1. First my Report autom mail come in PDF format that we have change to HTML view. (Basis people can do it.)
2. Page format previously it was X_44_120 we have change it to X_58_170 and the problem is resolve.
hope it will be help full for you.
Regards
Swati....

Unable to email from within Adobe Reader 7.1.0 (File, Email)

On a Windows 2000 Terminal Server, some users get the following error message when they open a PDF file and then click File, Email:
Microsoft Exchange: The object could not be found
I have no idea why this is happening for only certain Terminal Server users ...
Any suggestions would be appreciated.
L

I have the same problem with Adobe Professional after updating to version 7.1.0
Then I reinstalled the original 7.0.0 version and its OK now.
But I can not update to version 7.1.0, otherwise I wil have the same problem. And we missed all the other updates, because they are no longer available.
There must be a bug in version 7.1.0.
OS = XP
Outlook = 2000
Adobe Professional = 7.1.0

Is there a way to control Adobe PDF plugin from within a Web Application? For Example, Can we highlight text in the PDF/A document programatically?

Hi,
I am trying to open a PDF document in browser using Adobe PDF plug-in for IE 9. The plugin version is 10.x
I need to highlight certain text in the PDF document ( which is searchable) programmatically. For example, when a user selects certain text on the web-page, we want to automatically highlight that in the PDF document.

I don't think this is a question one can answer by simply downloading the SDK. And even if one reads all the documentation (it rarely happens for obvious reasons), it is not easy to reach an answer because its explanation is not trivial at all.
In my own opinion, this is right the type of question to be put and (hopefully) answered in a Forum.
Now, I am not sure about the correct answer but I will give one hint.
If I am not wrong, the Internet Explorer, IE, PDF viewer by Adobe is actually a .dll file which is put under IE once Adobe Reader is installed. A custom plug-in for Reader or Acrobat is also a .dll file (Windows) but its extension is .api and it needs to be copied under Reader or Acrobat (or both). Therefore, I don't see how we can merge the IE viewer .dll with a custom plug-in .api. Though maybe technically possible, I don't think it is something we can do.
If above reasoning is correct, the answer to the question is No.

How do I keep type kit from showing in my CC apps?

After reinstalling InDesign CC on one of my Macs Typekit started showing up as each file was opened. How do I stop this extra step of canceling typekit and then going to Type Manager! We are a service provider and i requier that my clients submitt a complete Package of every job to enable us to duplicate the file a close as posible to when the client worked it. Fontmanager is usefull but typekit is a nucence to the process. I need to stop it from showing up. Please help.

Hello Prepress2,
There is not an option to turn off the "missing fonts" search in InDesign at this time, but I have sent a request to that team to make this possible in the future.
Sorry I couldn't be of more help, but please let me know if you have any other questions or feedback. Best,
-- liz

How do you save a pdf to Adobe Document Cloud from within Acrobat Pro DC?

I have a full Creative Cloud account so I now have the updated Acrobat Pro DC for both my pc and my iPhone.
On my iPhone, when I opened a pdf I was given the option to save the file to Document Cloud. But on the PC, how do I open this file or others on Document Cloud, and how do I save a file to Document Cloud?
Thanks,
Rob

These are the screens that I am presented with when trying to save or open a file in Adobe Acrobat Pro DC. I am logged in with my account and have mobile sharing activated on my iOS app.
OS: Windows 7 64-bit.

Unable to display the Content of a data file from within another data file in Oracle webcenter portal.

We have a Content Presenter taskflow. This task flow is added to a jspx page. The taskflow fetches the content from the contributor data file. The contributor data file is having a WYSIWYG editor. The content of the WYSIWYG editor is being displayed correctly through the task flow.
We have some links in the WYSIWYG editor. These links again point to some data files. When we click on these links from within the portal, then we are getting a blank page(the url of this blank page is: http://localhost:7101/eWSIBPortal/faces/oracle/webcenter/sitestructure/render.jspx?datasource=UCM%23dDocName%3AWSIB_ARTICLE) and not displaying the content of the data file that we are pointing to from the WYSIWYG editor.
We want to display the content of these data files(which we have pointed from WYSIWYG editor) in-line within the portal.
Please help us to resolve this issue and let us know if any information is required from our end.

Thanks for reply. However, can I use XSQL to dump the formated text to a file? or just can display to client through web browsers?

Missing fonts in FrameMaker 9 even after installing Adobe Type Manager

Hi,
We are using Formata family fonts in our templates. We import the templates and don't see the font family.
We then installed the Adobe Type Manager and tried reimporting the template. No results.
We then edited the makers.ini file and added the Formata font in DefaultFamily, still we see the font as missing in the Paragraph Desiger and Catalog.
Any help in this regard is appriciated.
The FrameMaker version is 9 on Windows XP.
Thanks,
Mrini

Hi Mrini,
I need not the ATM on Windows XP or higher to install a font.
1. Open the \Windows\Fonts folder
2. Drag and Drop the font file otf, ttf or pfm (for ps fonts).
3. Then the font is available for Windows and for the applications.
4. Test it with Word and FrameMaker to choose this new font.
Additional information for FrameMaker and the maker.ini:
FrameMaker can differ Weight, Angles, Variations, Windows Weight and Angles only.
Indeed you can define the correct Family Name with information to the Windows font name and information.
That isn't longer important if you use FrameMaker on Windows platform, but it can be a great challenge
if you also work with Adobe InDesign.
InDesign works default with the correct Font Family name with Weight, Angles, Variations.
- GEorg

After updating to the newest update when I type messages in Facebook or gmail I am unable to see at what am typing as I am unable to move the message up..is there a fix?

I Have updated to the newest update which is 8.1.2 after updating anytime I try to type up a message in Facebook or gmail I am unable to see my screen where I type my message, so am typing my messages blindly. Is there a fix for this?

The Split Keyboard feature may have been enabled accidentally when you updated.
If the keyboard is up on the middle of the screen, or covering text and the text is not moving up as expected - tap and hold down on the little keyboard and icon and select - Dock
You can turn the split keyboard off in Settings>General>Keyboard>Split Keyboard>Off.

Unable to see a font in Adobe Type Kit from within Adobe Muse

Similar Messages

Maybe you are looking for