Unable to see AII links & paths in ABAP stack of NW04S
Hi SDNers,
I am not able to see anything related to AII on the ABAP Stack of NW04S, my basis team has installed AII 4.0 on the same client as XI on NW04S. I am able to see AII 4.0 component in the status of NW04S.
I am able to logon to web UI of AII through the web url.
Please help me in this regard.
Regards,
Gautam Purohit
Hi David,
Thanks for the help.
I am able to see & run various AII related transactions, but I am not able to see it in the SAP Easy Access Screen of NW04S.
So I am unable to navigate to:
Auto ID Infrastructure -> Master Data -> Number Ranges -> GTIN Number Range
Or any such path which I need to follow from the configuration guide.
Regards,
Gautam Purohit
Similar Messages
-
Unable to see ServerSettings link SLD home page
Hi All,
I'm unable to see Unable to see ServerSettings link SLD home page.
I want to seversettings in SLD.
This is the link i used: http://sapsp7:50100/sld/admin/index.jsp
Please help me out.
~SridharCheck this thread
https://forums.sdn.sap.com/click.jspa?searchID=390707&messageID=584723
Regards, ANilkumar -
How to see the JCO connections inthe ABAP Stack
Hi Gurus,
Is there any possible way to find the No.of JCO connections in the ABAP stack ,good solutions welocme and rewarded!
regards,
S.RajeshkumarHi,
JCO connections are just RFC calls.
If you know the user used by the JCO RFC calls, you can see the number of calls from ST03 RFC Server Profiles.
For example
In my XI (PI ) dual stack test system the JCO user is PI_JCO_RFC and I can see that last week there were 254 calls.
Regards,
Olivier -
Hi Experts,
I have created the logical path and filename in FILE tcode.I am trying to upload the pdf file to application server by using this path.But
I am getting message like "Unable to open the file".Even I cannot find the this path in AL11 tcode.Kindly anyone advise how to upload pdf file using
custom path and file created from FILE tcode.
Thanks & Regards,
Anusha.Hi Anusha,
Please give as below.
I forget to say you cannot open the PDF in AL11 and for that you need some configuration, i think it can be done using content server,not sure completely please wait for some more suggestions.
Regards,
Pavan -
Unable to see Serversettings link in SLD in EP7.0
Hi All,
I have installed Sneak Preview - 2004s in my local system. I am trying to follow the blog - https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/2167. [original link is broken] [original link is broken] [original link is broken] [original link is broken]
But in my system, i am not able to See <b>Server Settings</b> option on SLD (3rd Step).
Please guide me how to get this option? Is it a limitation on Sneak Preview or am i missing something?
Regards,
KumarCheck this thread
https://forums.sdn.sap.com/click.jspa?searchID=390707&messageID=584723
Regards, ANilkumar -
Unable to see the personalization link on any page
Hi,
I am unable to see the personalization link on any of my pages (not even on login page).
I am setting the profile option value to "Yes" for the profile option
FND: Personalization Region Link Enabled
Also I have bounced the Apache.
Please help me as I am stuck due to this.
Thanks,
AnoopDid you enabled the profile option Personalize Self-Service Defn (FND_CUSTOM_OA_DEFINTION) .It must be set to Yes.
Abhay -
Can't play you tube and other videos with Firefox. Have re-installed Adobe Flash player without success. I can play you tube videos using Internet Explorer.
I am also unable to even see the link to audio replay on Capitol Pressroom archives. The same link is visible and functional on Internet Explorer.There are some compatibility issues between the latest Flash player and some Firefox add-ons or settings. Could you see whether anything in this article helps: [[Flash 11.3 doesn't load video in Firefox]].
-
HT4623 I am unable to see the software update link under settings.please help
I am unable to see the software update link under settings.please help
Unless you are already using iOS 5, you have to connect to your itunes (on your computer) by cable, and will not have the update option in your iPhone's settings.
-
Content editor webpart- unable to see the list data if given the url in the content link?
HI,
In content editor webpart,unable to see the list data
when try to give the list url in the content link?
please help on the above issue.
and also want to see the styles to the list.
how to add the styles to the list row by row.Hi sudhir,
If you click the ellipsis beside the content link, it will pop up a window for you to input the file link. No list option will be offered to be chose.
When I add a content editor web part to a list, I usually save the code into a Notepad file and save it to a document library. Then copy the url of the document and then paste it into content link.
Also, you could click Edit HTML Source, then directly add code into the popup window. It works as the same as the above method.
Regards,
Rebecca Tu
TechNet Community Support -
URGENT: CR2011 Unable to see Linked Tables (Viewing Links)
In select expert tables are listed but when clicking on the links tab the tables do not appear. This occurs on tables created in CR2010 (with links appearing) and opened in 2011 AND with new reports created in 2011. Service Pak download did not fix problem.
Thanks for your reply. We are using SQL Server 2008 databases. I would think that this would not be a problem with CR2011 since we can see the linking tables in a CR Version 10 install. The other thing I noticed is that the linking icon does not show up as it does in the other install so I'm thinking that it might be a driver issue or an install issue?
Also tried to right click on the Options but the only thing close to our problem is the Smart-Linking which I turned on with no results. If you click on Order Link you can see the SQL links (not in graphic form) but can't add or delete anything. Some of our linking can be quite complex so we need to be able to drag and drop the links.
I would think that the product would work the same as in previous versions.
Thanks! -
Unable to see a column of a table in portal for a particular User
Hi,
A particular user is unable to see a particular column of a table in the portal . The application is developed in Webdynpro ABAP. The table contains two columns. Both the columns contain text type fields. What appears to the user is that the left column has disappeared and the right hand column has shifted to the left.
This is occuring for a particular user only. We have checked in our development and quality systems but we are unable to replicate the issue. Please help.
Thanks and regards,
Satya.Hi Vikas.
You can use BAPI in LSMW to craete Material or You can use direct input method. Both methods as follows below:
Using BAPI in LSMW:
First maintain IDOC Inbound Processing steps by giving PORT and Partner Type and Partner Numberby clicking 'settings' icon in menu path in LSMW Screen.
Adn then execute LSMW and maintain the values as below in the first step.
BusinessObject Method(BAPI)
Business Object BUS1001006 Standard material
Method SAVEDATA Create and change materia
Message Type MATMAS_BAPI Create and change materia
Basic Type MATMAS_BAPI03 Create and Change Materia.
For the selecting of views, you can maintain fields for all views(From Basic view to costing view) in your excel and populate with 'X' in respective fields for activating views.
In the 6th step (Maintain field mapping and conversion rules). you can map those fields for views which you want to activate since we have all views are in the standard structure.
Using Direct Input Method:
Standard Batch/Direct Input
Object 0020 Material master
Method 0000
Program Name RMDATIND
Program Type D Direct Input
For the selecting of views, you can maintain fields for all views(From Basic view to costing view) in your excel and populate with 'X' in respective fields for activating views.
In the 6th step (Maintain field mapping and conversion rules). you can map those fields for views which you want to activate since we have all views are in the standard structure. -
Problem with Java keystore and certificates (unable to find valid cert path
Our program is made so that when a certificate is not signed by a trusted Certification Authority, it will ask the user if he/her wishes to trust the certificate or not. If they decide to trust the certificate, it will accept the self signed certificate and import it into the keystore and then use that certificate to log the user in. This works fine. It will import the certificate into the keystore and use the specified ip address to establish a connection with the LDAP server (Active Directory in our case) and authenticate properly. However, the problem arises when we then try and connect to a different ip address (without restarting tomcat, if we restart tomcat, it works fine...). It imports the certificate into the keystore fine, but always gives the exception
"Root exception is javax.net.ssl.SSLHandshakeException: sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target"
and does not authenticate with our LDAP server (which is Active Directory). The problem seems to be that it is no longer looking at the System.setProperty("javax.net.ssl.trustStore", myTrustStore);
I have tried multiple times to just reset this property and try and "force" it to read from my specified trust file when this error happens. I have also imported the certificates directly into the <java_home>/jre/lib/security/cacerts and <java_home>/jre/lib/security/jssecacerts directories as the java documentation says that it will look at those directories first to see if it can find a trusted certificate. However, this does not work either. The only way that I can get this to work is by restarting tomcat all together.
If both of the certificates are already in the keystore before tomcat is started up, everything will work perfect. Again, the only problem is after first connecting to an IP address using TLS and importing the certificate, and then trying to connect to another IP address with a different certificate and import it into the keystore.
One of the interesting features of this is that after the second IP address has failed, I can change the IP address back to the first one that authenticated successfully and authenticate successfully again (ie
I use ip 1.1.1.1, import self signed certificate, authenticates successfully
login with ip 2.2.2.2 import self signed certificate, FAILS
login again with 1.1.1.1 (doesn't import certificate because it is already in keystore) successfully authenticates
Also, I am using java 1.5.0_03.
Any help is greatly appreciated as I've been trying to figure this out for over a week now.
ThanksPlease don't post in threads that are long dead and don't hijack other threads. When you have a question, start your own topic. Feel free to provide a link to an old post that may be relevant to your problem.
I'm locking this thread now. -
I am unable to see the created AD RMS Templates office 2010
Hi,
We have a SBS 2011 server (AD, exchange, DNS, ...etc) and a File server 2008 R2.
We installed the AD RMS feature on the File server and created the templates needed.
On AD RMS client (W7):
-We run the task scheduler.
-We create the registry key:
HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Common\DRM for office 2010 clients
HKEY_CURRENT_USER\Software\Microsoft\Office\12.0\Common\DRM for office 2007clients
On all MS 2007 client hasn't any problems but on all MS 2010 has a problem that: "unable to see the created AD RMS Templates.
Please advise,
Note: I prefer to contact me using my email
[email protected] to acceleratre our communication.Hi,
We need to check the templates in the path: C:\Users\martinr\AppData\Local\Microsoft\DRM\Templates
first.
Then, if you use 32-bit editions of Office running on 64-bit versions of Microsoft Windows,please try the following command:
HKEY_CURRENT_USER\Software\Wow6432Node\Microsoft\Office\<version>\Common\DRM.
Following this, I recommond do the two methods:
The permission policy path in the ADMX file is setup to use EDITTEXT (Regular Reg_sz), instead of EXPANDABLETEXT (REg_Expand_Sz).
The policy template is setup out of the box expects a static path (i.e. c:\templates, and cannot use %localappdata%\Microsoft\DRM\Templates)
For more detail information, please refer to the following link:
http://technet.microsoft.com/en-us/library/cc179103.aspx
http://technet.microsoft.com/en-us/library/dd772637(v=ws.10).aspx
Here is a similar issue, we could refer to:
http://social.technet.microsoft.com/Forums/en-US/224574c4-599b-4843-b235-f86ac74d03e9/ad-rms-template-problem?forum=rms
Regards,
George Zhao
TechNet Community Support -
Unable to see live data view for a access db
I'm using the following:
Asp.net C#
Server 2003 Sp2/
DW CS3
Access db
I'm attempting to connect to a "local" db on my server.
I use the database connection string"
Provider=Microsoft.Jet.OLEDB.4.0;
Data Source=C:\catalog\Catalog\files.mdb;
Persist Security Info=False
ole db connection
While in the data link properties window the connection is
successful but in the ole db connection window I get "An
unidentified error has occurred".
If I just press ok I'm unable to see any of the table in my
db.
All I want to do is setup the Live Data view
Thanks in advance for all your help."madhooper" <[email protected]> wrote in
message
news:fcc6vt$jd6$[email protected]..
>
>
> I'm using the following:
>
> Asp.net C#
> Server 2003 Sp2/
> DW CS3
> Access db
>
> I'm attempting to connect to a "local" db on my server.
> I use the database connection string"
>
> Provider=Microsoft.Jet.OLEDB.4.0;
> Data Source=C:\catalog\Catalog\files.mdb;
> Persist Security Info=False
> ole db connection
>
> While in the data link properties window the connection
is successful but
> in
> the ole db connection window I get "An unidentified
error has occurred".
>
> If I just press ok I'm unable to see any of the table in
my db.
>
> All I want to do is setup the Live Data view
>
> Thanks in advance for all your help.
Did you configure your testing server?
Set up a testing server
http://livedocs.adobe.com/en_US/Dreamweaver/9.0/WSc78c5058ca073340dcda9110b1f693f21-79e0.h tml
Preparing to build dynamic sites
http://livedocs.adobe.com/en_US/Dreamweaver/9.0/WSc78c5058ca073340dcda9110b1f693f21-7a31.h tml -
Unable to see "New from Par" option while creating Custom portal layout
Hi All,
I am unable to see "New from Par" option in Content Administrator. I am trying to create a custom page Layout for which I am need create layout using new par file. I am not able to see this menu option. Does anyone know from where to enable this option?
NiteshThere is no option like "new from par" from ep 7.
Create an iview based upon portal components.
check the below link for creation
http://help.sap.com/saphelp_nw04/helpdata/en/f5/eb50360e6a11d7b84900047582c9f7/frameset.htm
Koti Reddy
Maybe you are looking for
-
WHEN I GOT MY IPHONE I MADE A MISTAKE WHICH MY SON HELPED ME WITH. BUT I CLOBBERED THE NAME I WANTED FOR STORING ICOULD INFO. CAN THAT BE FIXED?
-
B2CBasket- Sales Order How to add Vendor partner and new line item of SO
Hi, I want to add the following BEFORE the sales order creation process starts: Add a VENDOR partner Add a new line item to ORDERADM_I I suspect in BADI CRM_ISA_BASKET_ITEMS and CRM_ISA_BASKET_HEAD. I have user 'HEAD' to add extension fields but cant
-
How Can I get My iMac Running again when its stuck in the Loading boot up Screen?
My 2010 21.5 Imac wont stop loading, The wheel just keeps spinning and it doesn't even boot in safe mode. the only thing i can do is get into single user mode. My Mac doesn't respond to command + r. I am able to pull up a disk to boot from but it do
-
How to remove duplicates in SAP Query
Dear Frns, I created a simple SAP query with quickviewer by table join option. tables are MAST & STPO. Link is only STLNR. I am getting a duplicate extra line with same data. Can anyone suggest me how it happened. Is there anyway to remove these dupl
-
Safari shuts down when trying to use bookmark or history screen
I am a Mac vigin and now had my Macbook Pro for 1 week, all was going well until the last few days when Safari keeps closing down when i look at history or bookmarks (the coverflow view?). It shuts down after about about 5 seconds or so. I have done