Unable to see ALERT Category in RWB- Alert Config

Hi Experts,
I have created an Alert Category using Transaction ALRTCATDEF. I followed it as mentioned in Michal's blog.
In Runtime workbench --> Alert Configuration, under Select Alert Category, I am unable to see the Alert Category which I have created. Only if, I could see this Alert Category, I will be able to select this and Add Rule. I used filters to search and even tried to click Update Table. But still unable to see.
Why is it that I am unable to see the Alert Category which I have created. Basically, I login as PISUPER and created the Alert Category. Kindly advise.
Balakrishnan

Hi,
Check out the Alert Category created again in the ALRTCATDEF Transaction.
Refer this SAP note-750287
Check out this troubleshooting guide-
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide
Rgds,
Moorthy

Similar Messages

Viewing alert in my RWB ALERT INBOX !!!

Hi all
I have read the blogs/forums in order to implement my alert inbox but until now I don´t know why my I can not see my alerts in the Run Time Workbench Alert Inbox.
Please see the steps that I have performed.
In the Abap Side
I have created an alert category D with this information:
    In the properties tab I fill the values fields for Description,priority,Max no of   dels,expiry time in min, escalation active,escalation recipient,tolerance
   In the container tab I have entered some variables
   I fill the long and short text for email
In Settings ---Configurations      I have only filled the status handling mails for errors status and the logging fields
In the Runtime Work bench Alert Configuration
I have created a new rule for my category
When I go to the rwb alert inbox , no error was triggered
In the SLG1 transaction for alert I have this error : No e-mail address is entered in Customizing for XML forwarding
Do I have to enter an email address in the Settings ---Configurations?
My purposes are to show the error alerts in RWB alert inbox
In my above descriptions do I had to configure something else?
be aware that services are running ok .Please give me a step by step action that I have to realize in order to trigger the alerts in the RWB alert inbox.
I have already read the forums, blogs and note for this, I am a little confused because my implementations are not working.

Hi,
Try this...
     1.      From the alert category definition environment (transaction ALRTCATDEF), choose Settings -> Configuration.
       2.      Ensure you are in change mode.
       3.      If you want to be able to confirm alerts by SMS or Internet mail, you must enter the user created to receive all incoming mails in the Inbound Processing section. For more information, see Alert Confirmation.
       4.      In the Status Handling for Mails section, you can specify which statuses are to be reported. The first setting refers to the system being informed, and the second refers to a status mail being sent to the sender.
       5.      In the Logging section, select Write Log only if you want additional information about the actual processing of the alerts. This information is logged using the standard application log and can be viewed in transaction SLG1 (object ALERT).
(Source: http://help.sap.com/saphelp_nw04/helpdata/en/9c/34193cb4f5131de10000000a11405a/frameset.htm)
Hope this helps
Cheers
Manish

Problem with CCMS PI7.1 alert configuration for RWB Alert count

Hi,
We have configured CCMS alert for PI7.1 RWB failure count. Alert is getting triggered only one time and after that no alerts. I can see the change in data but alert is not getting triggered. If I complete the alert then immediately in next run a new alert is generated with last reported data and then again there will be no alert going forward. Data is collected but no alert is triggered. Does anyone know the reason for this and how to fix it? Please help.
Thanks,
Kavitha Rajan.

Hi Jayan,
Our PI alert configuration is fine. And also we did not choose multiple suppress method. Problem is with Solution Manager CCMS PI alert configuration for failed RWB count. After initil alert and then nomore alerts are triggered. If I complete the alert then again only first alert is triggered and again no alerts going forward. Please advice.
Thanks,
Kavitha Rajan.

Alert Category in XI

Hi...
I am doing file to file scenario using BPM. I have created an exception. For that i want to create Alert Category in Xl. Kindly help me out in this by detailed descripition of how to create alert category.

1. Define Alert Category in ALRTCATDEF
2. Define Alert Rules in RWB --> Alert Configuration
And depending on the alert rules , if an error occurs in XI, the alert will be triggered.
Read the Blog by Michal and you will get the picture and then let me know if you need any inputs.
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
The Alerts in SAP XI can be raised for error happening in:
1. Adapter Engine
2. Integration Engine.
1. These Alerts are system generated in case anything happens in either of the component.
For this you need to:
1. Create ALert Category in the Trnasaction ALRTCATDEF
2. Create Alert rules in Runtime Workbench--> ALert Configuration and associating these rules to Alert category.
If you want you can do it without a BPM
and throw an exception in case any of the values is missing:
have a look at this weblog on how to throw exceptions
in a nice way:
/people/alessandro.guarneri/blog/2006/01/26/throwing-smart-exceptions-in-xi-graphical-mapping
Also just go through Raising Exceptions in SAP XI Mapping and see if it helps you solve the problem.
Also go through these links:
Forwarding Alerts to Alert Management (ALM)
Alert Management
XI: Alerts - Step by step
XI: Alerts - Troubleshooting guide
http://help.sap.com/saphelp_nw04/helpdata/en/dc/6b7f2243d711d1893e0000e8323c4f/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/68/253239bd1fa74ee10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cf/f2bbc8142c11d3b93a0000e8353423/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/5d/2166e6a91d11d188de0000e8216438/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/05/bb223905b61b0ae10000000a11402f/content.htm
For a Simple case with BPM refer:
http://help.sap.com/saphelp_nw2004s/helpdata/en/33/4a773f12f14a18e10000000a114084/frameset.htm
To send an EMAIL, assign an EMAIL ID to the corresponding user in the transaction SU01 and then set up SCOT and you can send emails when the ALERT is triggered..
Once you have configure Alerts, you will get the Alerts into ALERT INBOX in RWB of the user. To also get the email, the following needs to be done,
1. In SU01 -- Assign the Email ID for the Recipient of the ALERT.
2. In , RWB>ALERT INBOX> PERSONALIZATION--> Time Independent Delivery and Email are selected.
3. Finally, SCOT needs to be set up to send Emails. Check this for the same. You can ask your BASIS team to do this step.
http://help.sap.com/saphelp_nw04/helpdata/en/23/1edf098ea211d2b47300609419ed29/frameset.htm
Also, In ALRTCATDEF, go to SETTINGS--> CONFIGURATION. By default, the option selected is INTERNAL PROCESSING. Select the option SMTP FORWARDING AS XML and give the email id. This will enable you to send an email alert whenever an error occurs in XI.
/people/ginger.gatling/blog/2005/06/16/integrating-alerts-into-uwl--its-no-problem
http://help.sap.com/saphelp_erp2005vp/helpdata/en/92/5e073c8e56f658e10000000a114084/frameset.htm
http://service.sap.com/alert.
I hope it helps.....
pls reward points if solution found helpfull
regards
chandrakanth

Alert by mail or Alert by RWB alert inbox....

Hi
If I am in setting -> configuration->Smtp forwarding as XML in order to set up a mail for XI Alert error did that mean that won´t receive alert in the RWB alert Inbox ?
Can I implement both of functionalities (alert by mail and alert in rwb alert inbox ) at the same time ?
Thank U for your feet back

SMTP forwarding as XML will forward the Alert as XML message and will not send a alert to alert inbox . This is standard functionality.
If you want both mail and Alert in Alert inbox , procedure is a bit different,
1. Do not select SMTP Fowrdingas XML . Let it be none.
2. Make sure that the recipeient of the alert has the email id associated with him in SU01
3. Log on to Alert Inbox , and go to Personlization --> TIme Independent Delivery --> Email and this will forward now theAlert to both mail and alert inbox.
Mail will be a text mail though
regards
Bhavesh

Alert Category missing in RWB and "Add Rule" button disabled

Hi,
1) I have added an Alert category in ALRTCATDEF but this alert is not
visible in Runtime workbench -> Alert configuration. I have even
pressed the "Update Table" button but still the alert category is
missing the table.
2) The "Add Rule" button in Runtime workbench -> "Alert configuration"
is missing, even after selecting an alert category from the table of
Alert categories.
Is this some problem with my browser or something else??
I am using IE8 / IE6/ Moziall Firefox and PI 7.1
regrds,
Piyush

Hi Piyush,
-->make sure that you created the alert category in ABAP stack of PI only.Please recheck once.
-->In RWB if the buttons are in diabled mode means please check the roles for the user which you are using.Make sure that all the roles are assigned to your user for creating the alert category and alert rule.
have a try with these
Thanks

Runtime workbench , how can I see the receipients in the Alert category,

Hi guys,
Alert framework;=>
I have previosly created allert category in runtime wrokbench--->allert configuration.
Also allert rule is created with that allert category.
how can i see the recipients defined for that alert category
appreciate your help
Iver

Hi,
There are two ways one can define the recipients of the configured alerts.
1) Fixed Recipients: - Use tcode ALRTCATDEF and select your alert category and click on fixed recipient. tab
2) Recipients via User Role: It will help you to define alerts recipients via kind of roles they play.
For more help on alerts kindly check the below mentioned links :
alert management Alerts all in one
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/60c24b82-6da9-2a10-5a93-f1f729d89787
The specified item was not found. - Alert Configuration
Thanks!
Aditya

I'm unable to see the attachment in SharePoint 2007 list alert as i have alreday added attachemt before submiting this request

I'm unable to see the attachment in SharePoint 2007 list alert as i have alreday added attachemt before submiting this request.The
below request I attach with attachment.That attachment coulmn is not apperaing

I am a little confused, can you please elaborate with screenshot
If this helped you resolve your issue, please mark it Answered. You can reach me through http://itfreesupport.com/

BPM : Alert Category : PI 7.1

HI Experts
I am working on New BPM features of PI 7.1. I configured and BPM Scenario with User decission and now try to work out on Alert Category.
As per the below blog
Enhancements in ccBPM within SAP NetWeaver Process Integration 7.1
Alert Category can be defined in IR and that Category can be added in RULE from RWB(Alert Config)
The issue is, i am not able to see my Alert Category which is defined in IR in RWB, as the source of Alert in BPM is defined as "Enterprise Services Builder"
Please let me know..
Thanks in Advance
Prabhakar

Using SLG1, i traced the alert and found that Receipients are not assigned properly.
Issue solved by this.
Thanks
Prabhakar

Alert inbox in RWB

Hi,
whenever i executed a program of RSALERTTEST,
testing alerting message was sent by executing RSALERTTEST with alerting category i define by ALRTCATDEF to alert inbox in rwb as well. but i made deliberate receiver determination error, then i could not see any alerting message in alert inbox in rwb.
so what am i missing for alerting?
i am on SP15, XI SP 15
thanks in advance
venjamin

Hello All,
some remarks.
The report RSALERTPROC does not need to run to deliever RWB alerts. These alerts are pushed directly to the receiver. Only if you want escalation processes or if you want to forward CCMS alerts to the Alert Mgmt. you need to schedule RSALERTPROC.
From SP 14 on PMI-free alerting was introduced. That means before SP 14 one has to configure and activate the End-to-End Monitoring, and to schedule the report SXMSALERT_PROCESS_DATA_GET in order to extract the alerts from the PMI data. For SP 14 and higher, that's not longer necessary.
If no alerts are being delivered, please check if "Suppress multiple alerts of this rule" is checked for your rule.
For SP 14 and higher you could also have a look at the report sxmsalert_logreader. This report shows some information about alerts being created or not.
You'll find more information about trouble shooting the alerting in SAP Note 913858.
Rgds.,
Andreas

Regarding creation of new Alert category

Hi All
When I am creating a new alert category using Tcode ALRTCATDEF and trying to save it .A prompt-message is displayed as prompt for customizing request what should i do to create the new Alert category . and see it in the select Alert category box
Regards,
Aziz

Hi Aneez,
I have given u all the configuration steps with links also the different ways by which u can raise alert.
I think u have not gone through my threads. Also u did not replied me whether u resolved the problem which is raised in thread.
1) how can i send an email alert through RWB?
RWB is used for raising Integration and Adapter engine related errors.
Its depends upto u what kind of errors u want to send.
2)what are the steps i need to configure using Tcode ALRTCATDEF.
Already provided u in one of ur thread.
3) is this possible using CCMS Alerts .
U can use this is another way of raising errros.
4)do i need SMTP to be configured to send an Email Alert ?
GO to SU01 transaction and maintained email address where u need to send alert message. IN ALRTCATDEF u need to mentioned the use in the fixed receiver tab.
Hope it clears to you.
Thnx,
Chirag

RWB Alert Inbox Subscription No Alert Categories found

Hi,
In RWB> Alert Inbox> Subscription link, I could not find any Alert Categories.
Alert Inbox wokrks fine.
In the RWB> Alert Categories, every thing works fine and I can see the alert categories.
We r on NW 2004S PI 7.0 Service Pack 09.
reg,

Hi,
You should have the subscription authorization!
While defining the Alert Category in ALERCATDEF, you need to go to Sunscription Authorization and then give the roles who can subsrbie to this alert.
Then log on to the Alert inbox with an user id that has the same role and you will be able to see the Alert Categories.
Regards,
Bhavesh

Alert Category

HI All,
I defined Alert category in ALRTCATDF but Iam not able to see the Same Alert Category in Alertconfiguration.
Regards,
Prasad

Yes Iam able to do but its not coming in RWB
Is your question answered?
What about the CACHE? I am not able to remember it clearly whether alerts can be seen in SXI_CACHE.....if yes then is your alert category visible there?

Container Element in Alert Category

Hi,
Any one can tell me what is the use of container element in Alert Category.
While creating a container variable there is an drop down for Object type.When we go for each of these object type.
When i selected the object type as 'XML object type ' i could be able to see all the abstract interfaces and the fields that are created in the IR.I am able to select that field in the long text tab also.
But the value of the field is not getting reflected when an alert message is triggered.
Am I in a right track or doing anything wrong?Can i directly access this field in the long text?
Regards
Divia

Hi Sreedivia Narath,
Go through this blog for alert configuration by Michal. Its a beautiful blog and explains about the container variables:
The specified item was not found.
Thanks and Regards,
Sanjeev.

Intenal table as container variable in the alert category

Hi
Is it possible to create internal table as Container Variable in the alert category. If it is possible how can we pass the data to this internal table in the Run time to the funtion module SALRT_CREATE_API.I have tried this to pass the data to the container parameter
it_container ,but i was unable to achive it .If anyone has come across this please guide me .
Thanks and Regards,
Venkat

You can use the Forms "From Clause Query" as the datasource for the data block. Then you can change the QUERY_DATA_SOURCE_NAME using set_block_property, so you can use any SQL statement you like. Of course you must name/alias the columns in a consistent manner so that the number of database items on the block matches those being queried.

Unable to see ALERT Category in RWB- Alert Config

Similar Messages

Maybe you are looking for