Unable to see any people in people in hierarchy on MSS appraisal

Hi,
Can someone advice how to debug this issue, if one of the manager is unable to see to see any people in people in hierarchy on Manager Self Service appraisal screen. I checked all these employee has this manager as their supervisor in assignment table.
Please advice.
Regards,
AJ

You need to checked whether respective plan is published for these employee and Manager also.
Functionally you can checked with using Plan Moniter using "Performance Management Plan" Function.
Technically you can checked PER_APPRAISALS table whether corresponsding records has been created for respecitve employee/manager for that plan.
Thanks

Similar Messages

I am unable to see any POP3 or IMAP tab when I set up an account in my iphone 4S. Hence by default all my email accounts become IMAP and the messages are deleted from the server when I delete them from the iphone.

I am unable to see any POP3 or IMAP tab when I set up an account in my iphone 4S. Hence by default all my email accounts become IMAP and the messages are deleted from the server when I delete them from the iphone.

ok sorry everyone but i solved it myself but the solution is so nuts i've posted it here to help others who have the same problem.
to setup a comcast imap account on your iphone:
go to mail, contacts, etc in settings
under accts, select add account
select "other"
new screen, choose "add mail account"
now on the new acct screen you must enter your name, email address and password for your GMAIL acct ! (yes i said your gmail acct !, or some other acct with a NON comcast address).
hit next
then the acct verifies
when verified a screen will open with all the acct settings for this acct AND @ the top of the screen are the 2 buttons > imap or POP
select imap and THEN CHANGE ALL THE ACCOUNT information to the comcast account !
then hit next and the account will take a couple minutes to verify but it will verify and now you have a comcast imap acct set up on your iphone. The problem must be that when the iphone sends the initial verify acct info to comcast (if you enter that information first) the comcast server is simply not setup yet to signal the iphone that there is an imap option.

Unable to see any Tasks in the WCB or in Telnet.

Tasks are not getting generated in WCB and also in Telnet.
All the task setups are done.
Shipping transactions form --> Status is Released to Warehouse.
But unable to see any Tasks in the WCB or in Telnet.
can any one help me.
Thanks and Regards,
KVR

Hi,
Check whether the release rule you are running has the option Auto Allocate (Inventory Tab) is YES.
If it has NO then you have to run the Move Order Pick slip program with auto allocate move orders as YES and order types as pick wave for material allocation to happen.
once material is allocated you should be able to view them in WCB atleast.
After you find them in WCB but not on telnet then check you resource and device setup.
Karthik.

Today my Iphone unable to see any wifi network

Hello
Today my Iphone unable to see any wifi network.
I tried to solve the problem in several ways.
1. reset neteaork definitions. -> did not solve the problem
2. reset location and privecy -> did not solve the problem.
3. reset all definitions -> did not solve the problem.
Doses any one has any idea that can help?
Thakns
Moti

The only other option I can think of is to try a Reset All Settings reset. You won't lose anything, but your phone's settings will ALL be set back to factory default.
If this doesn't work you could try to do a restore through iTunes and set your phone up as new. If that doesn't work, you may have a hardware problem and will need to take the phone in to an Apple store to have it checked out.

Unable to see any servers under 'enterprise view' in eas

Hi all,
A while back, I added all servers in the eas console, and was able to see and access them all using the eas url:
http://easserver:10080/easconsole/console.html
When I logged in today, I am unable to see anything under 'enterprise view'. not even any options to add servers. I searched in this forum, and tried experimenting with different java versions. The only version of java that works with our eas in version: 1.6+.(we are using EPM 11.1.2).
Any ideas?
Thanks,
Sujani

Hi Shubham
Please check in SU01, Each tab like
Logon tab : Validity period from and through
Parameters Tab: parameter ID( SCL )and parameter value.(X)
Rolls Tab:SAP_BW_ALL and other roles
Regards
Kishore

OBIEE 11g : Unable to see any images while customizing styles and skins

Hi,
I am trying to customize OBIEE 11g style and skin. I followed the steps mentioned at http://www.rittmanmead.com/2010/12/oracle-bi-ee-11g-styles-skins-custom-xml-messages/ and also in oracle white paper http://www.oracle.com/technetwork/middleware/bi/customizing-oracle-biee-11g-176387.pdf.
I am not able to see any images on any OBIEE screens. After login, I can see the name of skin which i have created as the default skin but login page images, header images (after login) are not coming up. Can you please provide solution?
P.S. I have not changed any images or any css files in the custom skin and style directory. I just wanted to know first whether the new skin/style works for me. If it works, then i will apply some sort of customization.

That is correct. Also remember to delete browser cache. Here you have the folders: Re: how to insert the picture in the dashboard of BIEE
Let me know.
J.-

Unable to see any changes after the preview download

Hi Team,
I have registered as developer and downloaded the preview today. But i cant see any changes in the features. Am i missing something here ?
Regards,
Santosh

We have moved our support forum for OS Consumer Support, i.e. almost any support of the Preview for Developer release that is not related to developing an application, to the Microsoft Community website here:
http://answers.microsoft.com/en-us/winphone/forum/wp8
Eric Fleck, Windows Store and Windows Phone Developer Support. If you would like to provide feedback or suggestions for future improvements to the Windows Phone SDK please go to http://wpdev.uservoice.com/ where you can post your suggestions and/or cast
your votes for existing suggestions.

Satellite Pro L850-1P8 PSKG7E - Unable to see any BT devices

Hi
I have a Satellite Pro L850-1P8 PSKG7E- 00C002EN. I initially had a problem with the software recognizing the hardware. Resolved by re-installing the Atheros filter driver. Now everything say it is working and the latest drivers are installed.
I have a phone, a Nexus 7, a car and PV array that all see each other using their BT and will pair.
The PV array links to a PC based application via bluetooth which worked on a previous works Tosh Satellite Pro.
The laptop refuses to see any of the devices despite everything saying it is working properly and all other devices being visible to each other.
BT RFBUS Toshiba 8.0.2005.0
BT RFCOMM Toshiba 8.0.1129.0
BT RFHID Toshiba 8.0.830.0
BT RFUSB Controller 14 Toshiba 8.0.2005.0
As far as I can see there is no BT entry in the BIOS.
I have tried the FN F8 in both states.
Can anyone give me any guidance?

When you want to use BT on your notebook it is important to enable BT module properly. I presume it works with FN+F8. When the BT is on BT manager should start and in the task bar you should see small blue BT symbol.
When you enable BT does this manager start or not? Click on this symbol with right mouse button and choose option Add new connection. Scan the area and I hope your device should be found (enable visible modus).
You are right about BIOS. There is nothing related to BT functionality.

Unable to see any packages in Fink Commander

I have run all the suggested commands I can think of and see the Fink commander saying it's updating package lists, etc. However, when it's all done, there are still no packages viewable or available. I have selected both "unstable" and "unstable crypto packages. Any suggestions on how I can get this working so I can install some unix apps?
I appreciate everyone's help on this one.

Did you use these instructions? http://finkproject.org/download/index.php I don't have FCommander on Leopard, but on Panther machine I do. I followed all these instructions and it re uped Fink, etc. It worked anyway, but should fly if you follow the links instructions. Apparently nothing has changed in this respect. Note #5 FComm GUI instructions and on #6 I used source, for I have Developer. You want XCode off your install DVD, on your machine. And of course you can dump it all (uninstall question) http://www.finkproject.org/faq/usage-fink.php?phpLang=en#removing. Maybe you got a bad download. But then why not just grab something you want to install from say http://sourceforge.net/softwaremap/ or http://freshmeat.net/tags etc. and see what dependencies are needed and grab such, and do the ./configure, make, sudo make install? Try it. most people in this forum would go that route, I believe, then Fink and Macports. That's my 2¢.
Message was edited by: doug pennington

Hi Unable to see any horizontal scroll bar on tree table

Hi my tree table is in this format
<af:treeTable rowBandingInterval="0" columnStretching="last"
horizontalGridVisible="false"
verticalGridVisible="false"
inlineStyle="text-align:center; background-color:White;height:220px;"
value="#{C2SearchBean.treeModel}" var="node2"
initiallyExpanded="false" contentDelivery="lazy"
id="ProductCharcTreeId"
width="189px">
i was not able to see the horizontal scroll bat can you please help me out.

surround your treeTable with a panleCollection, or place it in a component that will stretch it like in the center facet of a panelStretchLayout.

Unable to See any field in General Setting panel of List UIBB

Hi Guys,
I am facing a problem of seeing nothing (not able to expand) in General setting panel of list UIBB after creating it with feeder class entry in component configuration editor. (as attached screen shot)
Please help me whether this an authorization issue or some setting problem.
Thanks
Param

Hi Paramjit
Is it resolved for you? My System is on 7.40 SP7 and I tried to implement note 2029925. I get information message..not can not be implemented.
Please help!!
Regards
Ashish Gupta

IOS7 and IPAD3 using numbers - unable to see any input in a table till you hit the 'next' button.

if I use a table to input data the ability to see the input requirement, such month, day, year, time entities, are not displayed till I hit the 'next' button.

The f4 help in the filter is dynamic help.It will only display the fields not the values.Its the general behaviors and how its is built for the filters.I have check the same on my system the f4 help on filter no text field is present.
Regards,
gurpreet

Unable to see any purchases in Family Sharing

I know iOS8 is completely new, but has anybody messed with Family Sharing yet? I set it up, and invited my husband. We both have "share purchases" turned on, the credit card is set up fine. On my iPad, if I go to the Purchased link in the App Store, it says "to start sharing purchases, finish setting up family sharing in iCloud" where iCloud is linked. I click on that, it brings me back to the Family Sharing preferences, and it's completely unclear what else isn't set up. I read through the few Apple FAQs on this specifically Sharing purchased content with Family Sharing and If you don't see your family's shared content and neither helps. I looked through iBooks and Music as well, and still don't see his purchases anywhere (there's no link or anything to his purchases like there's supposed to be).

Hi all,
i had the same problem but have FIXED IT!
Once you have set it up you then have to go back into setting and iCloud on all family devices and click on your name, it will prompt you to enter your Apple ID password. Once you do that on all devices, it then works fine. When you go into the iTunes store, App Store or iBooks, you will see in the Purchased section your family members. Apple could have explained this better. They finally explained it at this link: If you don't see your family's shared content
Sebastian

HT201401 My IPhone5 is not showing any display at all...........It's all black & am unable to see any apps etc etc

My IPhone5 is not showing any of my apps etc.........it's a completely dark screen

My IPhone5 is not showing any of my apps etc.........it's a completely dark screen

Unable to see any SDA file in inbox of JSPM

Hi Experts,
I am deploying MQ series JMS drivers into PI 7.1 system, i added the drivers to com.sap.aii.adapter.lib.sda archive file and i changed provider.xml and i place the file in JSPM inbox directory (Drive:\usr\sap\trans\EPS\in). but when i try to deploy using JSPM, JSPM is not identifying the SDA file. i am getting the following error in JSPM
"No applicable development components found for deployment in inbox directory"
Can anyone help me what could be the problem.
Thanks,
Rachana

Hi there,
Create SCA files for standard deployment and shipment to customers.
The Java SP manager (JSPM) can only process SCA files and not RAR files.
The SAP NetWeaver migration controller only accepts SCA files.
This is relevant if you have already shipped an adapter with a previous release.
For your reference in how to create them, please check:
http://help.sap.com/saphelp_nw70/helpdata/en/9d/5dbbec61c448298d804b1d3aeabd25/frameset.htm
and
https://cw.sdn.sap.com/cw/docs/DOC-110532
Regards,
Caio Cagnani

Unable to see any people in people in hierarchy on MSS appraisal

Similar Messages

Maybe you are looking for