Unable to see attachment attached in SRM in R/3

Hello Experts,
We are in SRM 7.0 classic scenario using DMS.
We are facing an issue as described below:-
When we are trying to open the attachment attached in SRM in backend R/3 system,we getting an error message "NO application exists".We are getting this error message when we try to open the attachment in the new backend R/3 which we connected just 2 days back.
However,we are able to open the attachment in the old backend R/3 system.
We have checked the settings in DC10 & DC30 for the new backend R/3 system and found it to be identical to old R/3 system.
We can see that document exists in the table in BBP_PDATT and also we checked RZ20 and we find no error log for the shopping cart.
We can also see the attachment in backend R/3 system but when we try to open it we are getting an error message
"Select an original application file first"
Can you plz provide some advise on why this is happening and how can we resolve this issue?
Thank you in advance.
Regards,
RKS

Hi,
Your problem can be resolved by following two ways:
1. Confugure new application in DC30 in new system instead of copying
2. Check the storage location for both the old and new system. if it's different then need to transfer files from old to new.
If storage location is same. Check the files paths in define workstation application in network.
I hope this will be helpful.
Regards,
Ravindra

Similar Messages

Unable to see markups in Outlook 2010 attachment preview

Hi,
I am unable to see markup tags which were done in Word 2010 in the Outlook 2010 attachment preview window. The word file normally gets marked up and sent as an attachment. Most of the time the attachment preview will highlight the markup over the words and
when the mouse is hovered over it will show the actual comment. For a couple of my users, this has stopped working.
When they double-click on the attachment they also cannot see the comments. However, if they save it to the local or network drive and then open the file all the markups will automatically appear.
As a test I asked them to send me the email which had this problem to see if this happens on my Outlook and I cannot see the markups either. So I guess something must have happened with the Word file?
Any ideas what this could be? The documents were originally composed in Word 2010 as far as I know. I have also created a test markup file and emailed this to myself and this shows the highlights fine.
I attach a picture of when its working well.
But with the documents that my users have this does not show.
Any suggestions really appreciated.

Hi,
What if we copy all the content from the problematic Word document and paste it to a new blank document, save and attach it to an email, will you see the markup?
Please let me know the result.
Regards,
Steve Fan
TechNet Community Support

I'm unable to see the attachment in SharePoint 2007 list alert as i have alreday added attachemt before submiting this request

I'm unable to see the attachment in SharePoint 2007 list alert as i have alreday added attachemt before submiting this request.The
below request I attach with attachment.That attachment coulmn is not apperaing

I am a little confused, can you please elaborate with screenshot
If this helped you resolve your issue, please mark it Answered. You can reach me through http://itfreesupport.com/

What is wrong with the table om page 2 (see attached file)

What is wrong with the table om page 2 (see attached file)

MySpecialSceenName wrote:
But there are several empty lines under the text...........
I'm guessing that by that you mean space for several lines, not empty paragraphs. This could be caused by any number of things, but not allowing hyphenation, or hyphantion rules that are too restictive might cause ID to be unable to break a line which would cause it to go into overset, as would possibly some combinations of Keep Options if there is more than one paragraph in the cell or if there is not enough room to fite the entire paragraph and you are just one line short with keep options requiring at least two lines be kept together at the end, for example. Applying No Break to a sting too wide for the cell would do it too.

Getting: Unable to send attachment with Mail Drop

Mail Drop is not working for me, I always get error message while trying to send.
Here is what happens:
-I compose a message that includes a large attachment
-I click send
-I get the message "Unable to send attachment with Mail Drop" for a few seconds
-My message is not sent and it goes into the Outbox folder.
Configuration:
OS X 10.10 Yosemite
Mail -> Preferences -> Accounts -> Advanced. The option "Send large attachments with Mail Drop" is selected.

I had the exact same problem. I finally figured out what was wrong. I believe you must have iCloud Drive turned on in System Preferences AND you also must allow mail to store document in iCloud Drive which you can check by clicking the "Options..." button in the preference pane of iCloud Drive. As you can see below.

Why are my pages documents unable to be attached in gmail

Since downloading Mavericks my Pages documents are unable to be attached in Gmail. Furthermore, in Final Cut Pro X videos that I attempt to post to
You Tube fail because, according to error window, network connection was lost. None of this happened before I upgraded to Mavericks.

Here are a couple of discussions indicating that Gmail is working on the Pages attachment issue. In the meantime, one workaround is to use Pages File Menu > Export To command and export to either a Word format or a Pages 09 format.
https://discussions.apple.com/message/23714858#23714858
http://productforums.google.com/forum/#!topic/gmail/VXFPW-44clg

Cisco Prime Infrastructure - I can't see the hardware virtual image when I selected a device managed by Prime Infrastructure. See attached picture

My Cisco Prime Infrastructure ver. 1.2.1.12
Cisco Prime Infrastructure - I can't see the hardware virtual image when I selected a device managed by Prime Infrastructure. See attached picture.
Please let me know how to access or enable the feature.
Thanks,
Tek

This is by no means a full solution, but deleting and re-adding only takes a few minutes if you use the "Export Device" and "Bulk Import" features from the Device Work Center. You can export the desired devices to a CSV file, delete them, then import from the CSV.
Of course, you might lose historical data when deleting the devices, but I'm guessing that's not as relevant since the devices themselves have been replaced by different hardware.

FB03 unable to open attachment list

Hi SAP members
I got the issue in which for FB03 unable to open attachment as it was maintained in the respective table.
Goto FB03 > ENVIRONMENT > ADDITIONAL ASSIGNMENTS > OBJECT LINKS and a popup appears in which attachment is available but double click on it nothing happens
Please let me know whether it is a functional issue or Technical Issue.
Thanks in Advance
Suresh

Hi Pradeep,
I am agreeing the Dev Patra's answer. Because it would be because of missing authorization roles also. Please execute SU53 after checking the above FB03 path.Then you will get the missing objects list to that t code.
I hope it helps!
Thanks & Regards,
Lakshmi S

Unable to find attachment part

I am getting the below error in weblogic while calling web service running in it.
Any suggestions?
Thanks,
com.bea.xml.XmlException: Unable to find attachment part for href = id0
     at weblogic.wsee.bind.types.AttachmentBase.deserializeType(AttachmentBase.java:108)
     at weblogic.wsee.bind.types.TypeRegistry.deserializeType(TypeRegistry.java:103)
     at weblogic.wsee.bind.runtime.internal.BaseDeserializerContext.deserializeType(BaseDeserializerContext.java:85)
     at weblogic.wsee.bind.runtime.internal.BaseDeserializerContext.deserializeWrappedElement(BaseDeserializerContext.java:133)
     at weblogic.wsee.codec.soap11.SoapDecoder.decodePart(SoapDecoder.java:398)
     at weblogic.wsee.codec.soap11.SoapDecoder.decodeParams(SoapDecoder.java:236)
     at weblogic.wsee.codec.soap11.SoapDecoder.decodeParts(SoapDecoder.java:163)
     at weblogic.wsee.codec.soap11.SoapDecoder.decode(SoapDecoder.java:116)
     at weblogic.wsee.codec.soap11.SoapCodec.decode(SoapCodec.java:138)
     at weblogic.wsee.ws.dispatch.server.CodecHandler.decode(CodecHandler.java:138)
     at weblogic.wsee.ws.dispatch.server.CodecHandler.handleRequest(CodecHandler.java:39)
     at weblogic.wsee.handler.HandlerIterator.handleRequest(HandlerIterator.java:127)
     at weblogic.wsee.ws.dispatch.server.ServerDispatcher.dispatch(ServerDispatcher.java:85)
     at weblogic.wsee.ws.WsSkel.invoke(WsSkel.java:80)
     at weblogic.wsee.server.servlet.SoapProcessor.handlePost(SoapProcessor.java:66)
     at weblogic.wsee.server.servlet.SoapProcessor.process(SoapProcessor.java:44)
     at weblogic.wsee.server.servlet.BaseWSServlet$AuthorizedInvoke.run(BaseWSServlet.java:173)
     at weblogic.wsee.server.servlet.BaseWSServlet.service(BaseWSServlet.java:92)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:223)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3245)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2003)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:1909)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1359)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
</bea_fault:stacktrace></detail></soapenv:Fault></soapenv:Body></soapenv:Envelope>

bash-4.0# pacman -Qo /opt/kde/bin/kpdf
/opt/kde/bin/kpdf is owned by kdemod3-kdegraphics-kpdf 3.5.10-1
How to add /opt/kde/bin/kpdf to my path.
Also it is not shown in the KDE Kickoff application launcher. Generally any Kde application is shown in the kickoff launcher

Can the text that says "See Attachment" that appears in the body of an e-mail be edited?

When I attach to an e-mail, text that says "See Attachment" appears in the body of the e-mail. I would like to edit this text to say something else. I cannot find where this text is stored in the settings, and I am not even sure if it is generated by thunderbird or by the software that I am using that invokes thunderbird.
Does anyone know where this text is stored, or if it can be edited?

There is nothing like what you talk about, so I am unsure what the question is really.
When you click on write a mail and then add an attachment I see nothing, but an attachment name in the top right corner of the email.

New update mac can't play vimeo can't play embedded mp3 can't see attach line in hotmail just a big mess

See above. mac 10.6.8 latest firefox just a terrible mess cannot see
"Attach" line in hotmail email replies so cannot attach files. Cannot see photos in "slideshow" format in hotmail. Cannot see embedded Mp3 files (appear for 1 second then gone!). Cannot play Vimeo
video-drags and does not load and sometimes no sound.
All this was perfect before!! What a mess!!

You are posting in the wrong forum, You should ask your questions here..
(However, just to say that QT Pro comes with the FCP 7 installation; you shouldn;t have to buy a license.)
Russ

I uninstalled and reinstalled but at the end of installation there were erros. See attached screen shot. I now cannot open the application. error code 10810 comes up when I try to open.

I could not update photoshop CS6 and Jeff from forum advised unistalling and reinstalling (Tk93580659). Mac OSX. In real trouble, as suggested I uninstalled and reinstalled but at the end of installation there were errors. See attached screen shot. Now I cannot open the application. Error code 10810 comes up when I try to open (see 2nd screenshot). Please help. I have now lost photoshop altogether whereas previous at least I still could use it but could not update. Thank you for any help to instal successfully. Dr Koh

Still looking for a solution to specific installation errors (see screeshot) referring to "Language Pack installation failure":
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Adobe Photoshop CS6 Core: Failed due to Language Pack installation failure
ERROR: DW050: - Adobe Photoshop CS6 International English Language Pack_AdobePhotoshop13-en_GB: Install failed
Unfortunately previous advice of using CCS cleaner tool, and suggestions from links for 1) "exit code 6 and 7" and 2) "Troubleshoot instal logs" did not work at all. So I am desparate to fix this because I have spent a lot of money purchasing Photoshop CS6 but have no functioning program. Surely Adobe can help solve this problem with installing, or else it means a lot of money spent on Photoshop CS6 for nothing. I am appealing directly to Adobe to help because I have come to the end of my options. I thank the forum for their suggestions but so far the solution for this specific "Language Pack installation failure" problem is missing. Thank you.
Dr Koh

Sending PO with attachment from SRM to ERP

Hi Experts,
My requirement is to Send PO with attachment from SRM to ERP.
I can get the attachment in the payload as mentioned in https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/3509. [original link is broken] [original link is broken] [original link is broken]
But how to post this attachment into the target ERP system so that it gets saved as an attachment in the Purchase Order.
Thanks & Regards,
Shobhit

Hi Shobhit,
I asume, the PO is send as an IDOC to ERP?
In this case, you have no chance to attach the attachment.
A wortkaoud would be to extract the needed date from the attachment and map the values into correcponding fields of the PO-Idoc.
Regards Mario

Cannot open email attachment in SRM

Dear Gurus,
I am using FM 'SO_NEW_DOCUMENT_ATT_SEND_API1' to send an email with attachment to SRM. Email and attachment can be opened successfully in the backend gui. However, in the browser the email can be opened but not the attachment (attachment appears as a paperclip).
To exclude the FM as the cause, I manually created the email from within the Business workplace but with exactly the same result. Is there a config setting which must be set before you can open attachment in the browser.
Many Thanks
Paul

What type of attachment it is?
Start Firefox in Safe Mode to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
<b> To Enable SafeMode </b>
*You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
*''Once you get the pop-up, just select "'Start in Safe Mode"''
If it works in Safe Mode and in normal mode with all extensions (Tools > Add-ons > Extensions) disabled then try to find which extension is causing it by enabling one extension at a time until the problem reappears.
Close and restart Firefox after each change via "Firefox > Exit" (Windows: Firefox/File > Exit; Mac: "Firefox > Quit Firefox"; Linux: "Firefox/File > Quit")
* https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Wired computers unable to see printer on Airport Express...help?

Hi all,
I recently set up an Airport Extreme on our office network to offer wireless network access piggybacked on our wired router. I then purchased an Airport Express which I was planning on using as a wireless print server for our Canon i9900 for all office computers connecting wired or wirelessly, which would interface with the network via the Airport Extreme Base Station.
I have configured the Express as an extension of the existing Airport network, and attached the printer to it via USB. All the computers in the office which have airport cards onboard can see and print from the printer, which is great. The problem is that all of the computers connecting to the network via wires are unable to see the printer (this is under both 10.3.x and 10.4.x, all airport software completely updated.) The Extreme base station shows up for all office computers in their Airport Admin Utility, AND if the printer is connected directly to the Extreme Base Station via USB, all computers can see the printer over Bonjour/Rendevous.
Anybody have ideas as to how I can get my wired machines to see the printer on the Airport Express?
Thanks!!

Applications > Utilities > Airport Admin Utility
Scan and Select your Airport
Click Configure
On the Airport Tab
Base Station Options...
Check Enable Remote Printer Access
iFelix

Unable to see attachment attached in SRM in R/3

Similar Messages

Maybe you are looking for